Highly efficient NbTiN nanostrip single-photon detectors using dielectric multilayer cavities for a 2-µm wavelength band.

We report superconducting nanostrip single-photon detectors (SNSPDs) with dielectric multilayer cavities (DMCs) for a 2-µm wavelength. We designed a DMC composed of periodic SiO2/Si bilayers. Simulation results of finite element analysis showed that the optical absorptance of the NbTiN nanostrips on the DMC exceeded 95% at 2 µm. We fabricated SNSPDs with an active area of 30 µm × 30 µm, which was sufficiently large to couple with a single-mode fiber of 2 µm. The fabricated SNSPDs were evaluated using a sorption-based cryocooler at a controlled temperature. We carefully verified the sensitivity of the power meter and calibrated the optical attenuators to accurately measure the system detection efficiency (SDE) at 2 µm. When the SNSPD was connected to an optical system via a spliced optical fiber, a high SDE of 84.1% was observed at 0.76 K. We also estimated the measurement uncertainty of the SDE as ±5.08% by considering all possible uncertainties in the SDE measurements.

Quantum frequency conversion using 4-port fiber-pigtailed PPLN module.

Quantum frequency conversion (QFC), which involves the exchange of frequency modes of photons, is a prerequisite for quantum interconnects among various quantum systems, primarily those based on telecom photonic network infrastructures. Compact and fiber-closed QFC modules are in high demand for such applications. In this paper, we report such a QFC module based on a fiber-coupled 4-port frequency converter with a periodically poled lithium niobate (PPLN) waveguide. The demonstrated QFC shifted the wavelength of a single photon from 780 to 1541 nm. The single photon was prepared via spontaneous parametric down-conversion (SPDC) with heralding photon detection, for which the cross-correlation function was 40.45 ± 0.09. The observed cross-correlation function of the photon pairs had a nonclassical value of 13.7 ± 0.4 after QFC at the maximum device efficiency of 0.73, which preserved the quantum statistical property. Such an efficient QFC module is useful for interfacing atomic systems and fiber-optic communication.

Demonstration of a Bosonic Quantum Classifier with Data Reuploading.

In a single qubit system, a universal quantum classifier can be realized using the data reuploading technique. In this study, we propose a new quantum classifier applying this technique to bosonic systems and successfully demonstrate it using a silicon-based photonic integrated circuit. We established a theory of quantum machine learning algorithm applicable to bosonic systems and implemented a programmable optical circuit combined with an interferometer. Learning and classification using part of the implemented optical quantum circuit with uncorrelated two photons resulted in a classification with a success probability of 94±0.8% in the proof of principle experiment. As this method can be applied to an arbitrary two-mode N-photon system, further development of optical quantum classifiers, such as extensions to quantum entangled and multiphoton states, is expected in the future.

Single-Shot Single-Mode Optical Two-Parameter Displacement Estimation beyond Classical Limit.

Uncertainty principle prohibits the precise measurement of both components of displacement parameters in phase space. We have theoretically shown that this limit can be beaten using single-photon states, in a single-shot and single-mode setting [F. Hanamura et al., Estimation of gaussian random displacement using non-gaussian states, Phys. Rev. A 104, 062601 (2021).PLRAAN2469-992610.1103/PhysRevA.104.062601]. In this Letter, we validate this by experimentally beating the classical limit. In optics, this is the first experiment to estimate both parameters of displacement using non-Gaussian states. This result is related to many important applications, such as quantum error correction.

Entanglement distribution using a biphoton frequency comb compatible with DWDM technology.

We demonstrate a distribution of frequency-multiplexed polarization-entangled photon pairs over 16 frequency channels using demultiplexers for the signal and idler photons with a frequency spacing of 25 GHz, which is compatible with dense wavelength division multiplexing (DWDM) technology. Unlike conventional frequency-multiplexed photon-pair distribution by a broadband spontaneous parametric down-conversion (SPDC) process, we use photon pairs produced as a biphoton frequency comb by SPDC inside a cavity where one of the paired photons is confined. Owing to the free spectral range of 12.5 GHz and the finesse of over 10 of the cavity, the generated photons having a narrow linewidth in one channel are separated well from those in the other channels, which minimizes channel cross-talk in advance. The observed fidelities of the photon pairs range from 81 % to 96 % in the 16 channels. The results show the usefulness of the polarization-entangled biphoton frequency comb for frequency-multiplexed entanglement distribution via a DWDM system.

Ultrafast measurement of a single-photon wave packet using an optical Kerr gate.

Ultrafast quantum optics with time-frequency entangled photons is at the forefront of progress towards future quantum technologies. However, to unravel the time domain structure of entangled photons and exploit fully their rich dimensionality, a single-photon detector with sub-picosecond temporal resolution is required. Here, we present ultrafast single-photon detection using an optical Kerr gate composed of a photonic crystal fiber (PCF) placed inside a Sagnac interferometer. A near-rectangle temporal waveform of a heralded single-photon generated via spontaneous parametric down-conversion is measured with temporal resolution as high as 224 ± 9 fs. The large nonlinearity and long effective interaction length of the PCF enables maximum detection efficiency to be achieved with only 30.5 mW gating pulse average power, demonstrating an order-of-magnitude improvement compared to optical gating with sum-frequency generation. Also, we discuss the trade-off relationship between detection efficiency and temporal resolution.

Generation of Schrödinger cat states with Wigner negativity using a continuous-wave low-loss waveguide optical parametric amplifier.

Continuous-wave (CW) squeezed light is used in the generation of various optical quantum states, and thus is a fundamental resource of fault-tolerant universal quantum computation using optical continuous variables. To realize a practical quantum computer, a waveguide optical parametric amplifier (OPA) is an attractive CW squeezed light source in terms of its THz-order bandwidth and suitability for modularization. The usages of a waveguide OPA in quantum applications thus far, however, are limited due to the difficulty of the generation of the squeezed light with a high purity. In this paper, we report the first observation of Wigner negativity of the states generated by a heralding method using a waveguide OPA. We generate Schrödinger cat states at the wavelength of 1545 nm with Wigner negativity using a quasi-single-mode ZnO-doped periodically poled LiNbO3 waveguide module we developed. Wigner negativity is regarded as an important indicator of the usefulness of the quantum states as it is essential in the fault-tolerant universal quantum computation. Our result shows that our waveguide OPA can be used in wide range of quantum applications leading to a THz-clock optical quantum computer.

Quantum detector tomography of a superconducting nanostrip photon-number-resolving detector.

Superconducting nanostrip photon detectors have been used as single-photon detectors, which can discriminate only photons' presence or absence. It has recently been found that they can discriminate the number of photons by analyzing the output signal waveform, and they are expected to be used in various fields, especially in optical-quantum-information processing. Here, we improve the photon-number-resolving performance for light with a high-average photon number by pattern matching of the output signal waveform. Furthermore, we estimate the positive-operator-valued measure of the detector by a quantum detector tomography. The result shows that the device has photon-number-resolving performance up to five photons without any multiplexing or arraying, indicating that it is useful as a photon-number-resolving detector.

Photon detection at 1 ns time intervals using 16-element SNSPD array with SFQ multiplexer.

We demonstrate the high-speed operation of a 16-element superconducting nanostrip single-photon detector (SNSPD) array with a single flux quantum (SFQ) multiplexer. The SFQ multiplexer can reshape the output signals from 16-element SNSPD into pulses with durations shorter than 1 ns and bundle these pulses into one output line, which is advantageous for high-speed operation of the SNSPD array system. We confirmed the correct operation of the 16-element SNSPD system with a system detection efficiency of 80% at a wavelength of 1550 nm, timing jitter of 45 ps, and successful observation of photons at 1 ns time intervals as distinguishable output pulses. The reduction in detection efficiency could also be suppressed to ∼0.93 during the dead time of ∼10ns for each SNSPD pixel when the incident photon flux was relatively low at 0.1 photon/pulse.

Scalable implementation of a superconducting nanowire single-photon detector array with a superconducting digital signal processor.

A two-dimensional single-photon imaging system with high sensitivity and high time resolution is the ultimate camera and useful in a wide range of fields. A superconducting nanowire single-photon detector (SSPD or SNSPD) is one of the best candidates for realizing such an ultimate camera due to its high detection efficiency in a wide spectral range, low dark count rate without after-pulsing, and excellent time resolution. Here we propose a new readout scheme to realize a large-scale imaging array based on SSPD, where a row-column readout architecture is combined with a digital signal processor based on a single-flux-quantum (SFQ) circuit. A 16-pixel row-column readout SSPD array is fabricated and measured with an SFQ digital signal processor. We successfully acquired spatial information as encoded digital bit codes with the temporal information of the photon detection. The system timing jitter was measured as <80 ps for all 16 pixels even through the SFQ signal processor, indicating the potential for an imaging array with an extremely high time resolution.

Spectral characterization of photon-pair sources via classical sum-frequency generation.

Tailoring spectral properties of photon pairs is of great importance for optical quantum information and measurement applications. High-resolution spectral measurement is a key technique for engineering spectral properties of photons, making them ideal for various quantum applications. Here we demonstrate spectral measurements and optimization of frequency-entangled photon pairs produced via spontaneous parametric downconversion (SPDC), utilizing frequency-resolved sum-frequency generation (SFG), the reverse process of SPDC. A joint phase-matching spectrum of a nonlinear crystal around 1580 nm is captured with a 40 pm resolution and a > 40 dB signal-to-noise ratio, which is significantly improved compared to traditional frequency-resolved coincidence measurements. Moreover, our scheme is applicable to collinear degenerate sources whose characterization is difficult with previously demonstrated stimulated difference frequency generation (DFG). We also illustrate that the observed phase-matching function is useful for finding an optimal pump spectrum to maximize the spectral indistinguishability of SPDC photons. We expect that our precise spectral characterization technique will be useful tool for characterizing and tailoring SPDC sources for a wide range of optical quantum applications.

Scalable readout interface for superconducting nanowire single-photon detectors using AQFP and RSFQ logic families.

We propose a scalable readout interface for superconducting nanowire single-photon detector (SSPD) arrays, which we call the AQFP/RSFQ interface. This interface is composed of adiabatic quantum-flux-parametron (AQFP) and rapid single-flux-quantum (RSFQ) logic families. The AQFP part reads out the spatial information of an SSPD array via a single cable, and the RSFQ part reads out the temporal information via a single cable. The hybrid interface has high temporal resolution owing to low timing jitter in the operation of the RSFQ part. In addition, the hybrid interface achieves high circuit scalability because of low supply current in the operation of the AQFP part. Therefore, the hybrid interface is suitable for handling many-pixel SSPD arrays. We demonstrate a four-pixel SSPD array using the hybrid interface as proof of concept. The measurement results show that the hybrid interface can read out all of the pixels with a low error rate and low timing jitter.

Ultra-high-rate nonclassical light source with 50 GHz-repetition-rate mode-locked pump pulses and multiplexed single-photon detectors.

Heralded single photons (HSPs) and entangled photon pairs (EPPs) via spontaneous parametric down-conversion are essential tools for the development of photonic quantum information technologies. In this paper, we report a novel ultra-high-rate nonclassical light source realized by developing 50 GHz-repetition-rate mode-locked pump pulses and multiplexed superconducting nanowire single-photon detectors. The presence of the single-photon state in the heralded photons with our setup was indicated by the second-order intensity correlation below 1/2 at the heralding rate over 20 Mcps. Even at the rate beyond 50 Mcps, the nonclassicality was still observed with the intensity correlation below unity. Moreover, our setup is also applicable to the polarization-EPP experiment, where we obtained the maximum coincidence rate of 1.6 Mcps with the fidelity of 0.881 ± (0.254 × 10-3) to the maximally entangled state. Our versatile source could be a promising tool to explore various large-scale quantum-photonic experiments with low success probability and heavy attenuation.

Photon counting LIDAR at 2.3µm wavelength with superconducting nanowires.

In this work, we show a proof-of-principle benchtop single-photon light detection and ranging (LIDAR) depth imager at 2.3µm, utilizing superconducting nanowire single-photon detectors (SNSPDs). We fabricate and fiber-couple SNSPDs to exhibit enhanced photon counting performance in the mid-infrared. We present characterization results using an optical parametric oscillator source and deploy these detectors in a scanning LIDAR setup at 2.3µm wavelength. This demonstrates the viability of these detectors for future free-space photon counting applications in the mid-infrared where atmospheric absorption and background solar flux are low.

Frequency-Multiplexed Photon Pairs Over 1000 Modes from a Quadratic Nonlinear Optical Waveguide Resonator with a Singly Resonant Configuration.

We demonstrate a frequency multiplexed photon pair generation based on a quadratic nonlinear optical waveguide inside a cavity which confines only signal photons without confining idler photons and the pump light. We monolithically constructed the photon pair generator by a periodically poled lithium niobate (PPLN) waveguide with a high reflective coating for the signal photons around 1600 nm and with antireflective coatings for the idler photons around 1520 nm and the pump light at 780 nm at the end faces of the PPLN waveguide. We observed a comblike photon pair generation with a mode spacing of the free spectral range of the cavity. Unlike the conventional multiple resonant photon pair generation experiments, the photon pair generation was incessant within a range of 80 nm without missing teeth due to a mismatch of the energy conservation and the cavity resonance condition of the photons, resulting in over 1000-mode frequency multiplexed photon pairs in this range.

High-time-resolved 64-channel single-flux quantum-based address encoder integrated with a multi-pixel superconducting nanowire single-photon detector.

We propose and demonstrate a 64-channel event-driven encoder based on single-flux quantum (SFQ) circuits for application to a multi-pixel superconducting nanowire single-photon detector (SSPD) system. Multi-pixel SSPD systems were developed to improve maximum count rates and realize ultra-sensitive imaging systems. An intelligent signal processor is required, which we designed based on SFQ circuits. We were able to obtain an address based on the reserve timing information for the photon detection that occurs in the SSPD, as well as read the time-tagged address information for the SSPDs through the SFQ encoder. The overall observed FWHM jitter was 56.5 ps.

Stable, high-performance operation of a fiber-coupled superconducting nanowire avalanche photon detector.

Recent progress in the development of superconducting nanowire single photon detectors (SSPD or SNSPD) has delivered excellent performance, and has had a great impact on a range of research fields. Significant efforts are being made to further improve the technology, and a primary concern remains to resolve the trade-offs between detection efficiency (DE), timing jitter, and response speed. We present a stable and high-performance fiber-coupled niobium titanium nitride superconducting nanowire avalanche photon detector (SNAP) that resolves these trade-offs. Autocorrelation function measurement revealed an afterpulse-free operation in serially connected two SNAP (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.65 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating in a practical Gifford-McMahon cryocooler system.

High visibility Hong-Ou-Mandel interference via a time-resolved coincidence measurement.

A high visibility Hong-Ou-Mandel (HOM) interference between two independently prepared photons plays an important role in various photonic quantum information processing. In a standard HOM experiment using photons generated by pulse-pumped spontaneous parametric down conversion (SPDC), larger detection time windows than the coherence time of photons have been employed for measuring the HOM visibility and/or drawing the HOM dip. If large amounts of stray photons continuously exist within the detection time windows, employing small detection time windows is favorable for reducing the effect of background noises. Especially, such a setup is helpful for the HOM experiment using continuous wave (cw)-pumped SPDC and the time-resolved coincidence measurement. Here we argue that the method for determining the HOM visibility used in the previous cw experiments tends to suffer from distortion arising from biased contribution of the background noises. We then present a new method with unbiased treatment of the cw backgrounds. By using this method, we experimentally demonstrate a high visibility HOM interference of two heralded telecom photons independently generated by SPDC with employing cw pump light. An observed HOM visibility is 0.87 ± 0.04, which is as high as those observed by using pulse-pumped SPDC photons.

Mach-Zehnder interferometer using frequency-domain beamsplitter.

We demonstrate a first-order interference between coherent light at 1580 nm and 795 nm by using a frequency-domain Mach-Zehnder interferometer (MZI). The MZI is implemented by two frequency-domain BSs based on a second-order nonlinear optical effect in a periodically-poled lithium niobate waveguide with a strong pump light. The observed visibility is over 0.99 at 50% conversion efficiencies of the BSs. Toward photonic quantum information processing, sufficiently small background photon rate is necessary. From measurement results with a superconducting single photon detector (SSPD), we discuss the feasibility of the frequency-domain MZI in a quantum regime. Our estimation shows that the single photon interference with the visibility above 0.9 is feasible with practical settings.

High-extinction ratio integrated photonic filters for silicon quantum photonics.

We present the generation of quantum-correlated photon pairs and subsequent pump rejection across two silicon-on-insulator photonic integrated circuits. Incoherently cascaded lattice filters are used to provide over 100 dB pass-band to stop-band contrast with no additional external filtering. Photon pairs generated in a microring resonator are successfully separated from the input pump, confirmed by temporal correlations measurements.