Scaffold-Hopped Compound Identification by Ligand-Based Approaches with a Prospective Affinity Test.

Scaffold-hopped (SH) compounds are bioactive compounds structurally different from known active compounds. Identifying SH compounds in the ligand-based approaches has been a central issue in medicinal chemistry, and various molecular representations of scaffold hopping have been proposed. However, appropriate representations for SH compound identification remain unclear. Herein, the ability of SH compound identification among several representations was fairly evaluated based on retrospective validation and prospective demonstration. In the retrospective validation, the combinations of two screening algorithms and four two- and three-dimensional molecular representations were compared using controlled data sets for the early identification of SH compounds. We found that the combination of the support vector machine and extended connectivity fingerprint with bond diameter 4 (SVM-ECFP4) and SVM and the rapid overlay of chemical structures (SVM-ROCS) showed a relatively high performance. The compounds that were highly ranked by SVM-ROCS did not share substructures with the active training compounds, while those ranked by SVM-ECFP4 were mostly recombinant. In the prospective demonstration, 93 SH compounds were prepared by screening the Namiki database using SVM-ROCS, targeting ABL1 inhibitors. The primary screening using surface plasmon resonance suggested five active compounds; however, in the competitive binding assays with adenosine triphosphate, no hits were found.

Ligand-based approaches to activity prediction for the early stage of structure-activity-relationship progression.

The retrospective evaluation of virtual screening approaches and activity prediction models are important for methodological development. However, for fair comparison, evaluation data sets must be carefully prepared. In this research, we compiled structure-activity-relationship matrix-based data sets for 15 biological targets along with many diverse inactive compounds, assuming the early stage of structure-activity-relationship progression. To use a large number of diverse inactive compounds and a limited number of active compounds, similarity profiles (SPs) are proposed as a set of molecular descriptors. Using these highly imbalanced data sets, we evaluated various approaches including SPs, under-sampling, support vector machine (SVM), and message passing neural networks. We found that for the under-sampling approaches, cluster-based sampling is better than random sampling. For virtual screening, SPs with inactive reference compounds and the under-sampling SVM also perform well. For classification, SPs with many inactive references performed as well as the under-sampling SVM trained on a balanced data set. Although the performance of SPs and the under-sampling SVM were comparable, SPs with many inactive references were preferable for selecting structurally distinct compounds from the active training compounds.

Sparse Topological Pharmacophore Graphs for Interpretable Scaffold Hopping.

The aim of scaffold hopping (SH) is to find compounds consisting of different scaffolds from those in already known active compounds, giving an opportunity for unexplored regions of chemical space. We previously demonstrated the usefulness of pharmacophore graphs (PhGs) for this purpose through proof-of-concept virtual screening experiments. PhGs consist of nodes and edges corresponding to pharmacophoric features (PFs) and their topological distances. Although PhGs were effective in SH, they are hard to interpret as they are complete graphs. Herein, we introduce an intuitive representation of a molecule, termed as sparse pharmacophore graphs (SPhG) by keeping the topological distances among PFs as much as possible while reducing the number of edges in the graphs. Several benchmark calculations quantitatively confirmed the sparseness of the graphs and the preservation of topological distances among pharmacophoric points. As proof-of-concept applications, virtual screening (VS) trials for SH were conducted using active and inactive compounds from ChEMBL and PubChem databases for three biological targets: thrombin, tyrosine kinase ABL1, and κ-opioid receptor. The performances of VS were comparable with using fully connected PhGs. Furthermore, highly ranked SPhGs were interpretable for the three biological targets, in particular for thrombin, for which selected SPhGs were in agreement with the structure-based interpretation.

Comparing predictive ability of QSAR/QSPR models using 2D and 3D molecular representations.

Quantitative structure-activity relationship (QSAR) and quantitative structure-property relationship (QSPR) models predict biological activity and molecular property based on the numerical relationship between chemical structures and activity (property) values. Molecular representations are of importance in QSAR/QSPR analysis. Topological information of molecular structures is usually utilized (2D representations) for this purpose. However, conformational information seems important because molecules are in the three-dimensional space. As a three-dimensional molecular representation applicable to diverse compounds, similarity between a test molecule and a set of reference molecules has been previously proposed. This 3D representation was found to be effective on virtual screening for early enrichment of active compounds. In this study, we introduced the 3D representation into QSAR/QSPR modeling (regression tasks). Furthermore, we investigated relative merits of 3D representations over 2D in terms of the diversity of training data sets. For the prediction task of quantum mechanics-based properties, the 3D representations were superior to 2D. For predicting activity of small molecules against specific biological targets, no consistent trend was observed in the difference of performance using the two types of representations, irrespective of the diversity of training data sets.

Interpretation of Ligand-Based Activity Cliff Prediction Models Using the Matched Molecular Pair Kernel.

Activity cliffs (ACs) are formed by two structurally similar compounds with a large difference in potency. Accurate AC prediction is expected to help researchers' decisions in the early stages of drug discovery. Previously, predictive models based on matched molecular pair (MMP) cliffs have been proposed. However, the proposed methods face a challenge of interpretability due to the black-box character of the predictive models. In this study, we developed interpretable MMP fingerprints and modified a model-specific interpretation approach for models based on a support vector machine (SVM) and MMP kernel. We compared important features highlighted by this SVM-based interpretation approach and the SHapley Additive exPlanations (SHAP) as a major model-independent approach. The model-specific approach could capture the difference between AC and non-AC, while SHAP assigned high weights to the features not present in the test instances. For specific MMPs, the feature weights mapped by the SVM-based interpretation method were in agreement with the previously confirmed binding knowledge from X-ray co-crystal structures, indicating that this method is able to interpret the AC prediction model in a chemically intuitive manner.

Exploring Topological Pharmacophore Graphs for Scaffold Hopping.

The primary goal of ligand-based virtual screening is to identify active compounds consisting of a core scaffold that is not found in the current active compound pool. Scaffold hopping is the term used for this purpose. In the present study, topological representations of pharmacophore features on chemical graphs were investigated for scaffold hopping. Pharmacophore graphs (PhGs), which consist of pharmacophore features as nodes and their topological distances as edges, were used as a representation of important information on compounds being active. We investigated ranking methods for prioritizing PhGs for scaffold hopping. The proposed method, NScaffold, which ranks PhGs based on the number of scaffolds covered by the PhGs, outperforms other conventional methods. As a demonstrative case, using a thrombin inhibitor data set, we interpreted the highest-ranked PhGs by NScaffold from the protein-ligand interaction point of view. It resulted that the NScaffold method successfully retrieved three known important interactions, showing the potential for identifying scaffold-hopped compounds with interpretable PhGs.

Th2 cell differentiation from naive CD4+ T cells is enhanced by autocrine CC chemokines in atopic diseases.

BACKGROUND: Chemokines are involved not only in regulating leucocyte recruitment, but also in other activities. However, functions other than cell recruitment remain poorly understood. We have already shown that the production of CC chemokine ligand (CCL)17 and CCL22 by antigen-stimulated naïve CD4+  T cells was higher in asthmatic patients than in healthy controls. However, the role of these chemokines in stimulated naïve CD4+ T cells remains unclear. OBJECTIVE: To clarify the biological function of CCL17 and CCL22 on naïve CD4+ T, we examined effects of these two chemokines on naïve CD4+ T cells expressing CC chemokine receptor (CCR)4 (a receptor for CCL17 and CCL22) during differentiation of Th2 cells in asthmatic patients as allergic subjects. METHODS: Naïve CD4+ T cells were prepared from healthy controls and patients with asthma. We analysed effect of CCL17 and CCL22, and blocking their receptor on differentiation of Th2 cells. RESULTS: Production of CCL17 and CCL22 by activated naive CD4+ T cells under Th2 condition was much more in asthmatic patients than in healthy controls. Proliferation and survival of the Th2 differentiating cells and restimulation-induced IL-4 production were much greater in asthmatic patients than in healthy controls. These cell biological phenomena were inhibited by blockade of CCR4. The biological effects of exogenous CCL17 and CCL22 were apparently observed in both healthy controls and asthmatic patients. The effectiveness of these chemokines on naïve CD4+ T cells from healthy controls was stronger than those from asthmatic patients. We found that thymic stromal lymphopoietin (TSLP), a Th2 promoting chemokine, is involved in the activation of CD4+ naïve T cells via production of CCL17 and CCL22. CONCLUSIONS AND CLINICAL RELEVANCE: These data suggest that CCL17 and CCL22 produced by TSLP-primed naïve CD4+ T cells in asthma might contribute to an increase in Th2 cells via autocrine loops.

Iterative Screening Methods for Identification of Chemical Compounds with Specific Values of Various Properties.

Identification of chemical compounds having desirable properties is a central goal of screening campaigns. Iterative screening is a means of surveying a set of compounds, during which their property values are determined and used as feedback for regression models. Quantitative models that assess the relationships between chemical structures and property/activity are repeatedly updated through this type of cycle, and the efficient sampling of compounds for the subsequent test is a key factor in the early identification of target compounds. Nevertheless, methodological approaches to comparisons and to establishing the degree of extrapolation of sampled compounds, including the effects of applicability domains, are still required. In the present study, we conducted a series of virtual experiments to assess the characteristics of different iterative screening methods. Genetic algorithm-based partial least-squares regression, support vector regression, Bayesian optimization with Gaussian Process (GP), and batch-based Bayesian optimization with GP (GP_batch) were all compared, based on the analysis of one million compounds extracted from the ZINC database. Our results show that, irrespective of the diversity of the initial set of compounds, it was possible to identify a compound having the desired property value using the appropriate screening method. However, overall, the GP_batch method was found to be preferable when evaluating properties either which are difficult to predict or for which a key factor is present in the set of molecular descriptors.

Exploring Alternative Strategies for the Identification of Potent Compounds Using Support Vector Machine and Regression Modeling.

Support vector regression (SVR) is a premier approach for the prediction of compound potency. Given the conceptual link between support vector machine (SVM) and SVR modeling, SVR is capable of accounting for continuous and discontinuous structure-activity relationships (SARs) in potency prediction, which further extends the classical quantitative SAR (QSAR) paradigm. In the context of virtual compound screening, compound potency prediction can be applied to identify the most potent compounds that are available or enrich database selection sets with potent compounds. To these ends, we have evaluated new potency prediction strategies. Conventional (direct) potency prediction using SVR was compared to two-stage SVM-SVR modeling and potency prediction using SVR models trained in the presence of active and inactive compounds, a previously unconsidered approach. The latter models were found to maximize the recall of potent compounds but were least accurate in predicting high potency values. For this purpose, direct SVR predictions were preferred. However, the best balance between accurate potency predictions and enrichment of potent compounds in database selection sets was achieved by combined SVM-SVR modeling. Taken together, our findings further extend current approaches for compound potency prediction in virtual compound screening.

Three-Dimensional Activity Landscape Models of Different Design and Their Application to Compound Mapping and Potency Prediction.

Activity landscapes (ALs) integrate structural and potency data of active compounds and provide graphical access to structure-activity relationships (SARs) contained in compound data sets. Three-dimensional (3D) ALs can be conceptualized as a two-dimensional (2D) projection of chemical space with an interpolated activity surface added as a third dimension. Such 3D ALs are particularly intuitive for SAR visualization. In this work, 3D ALs were generated on the basis of different projection methods and fingerprint descriptors, and their topologies were compared. Moreover, going beyond qualitative analysis, the use of 3D ALs for semiquantitative and quantitative potency predictions was investigated. NeuroScale, a neural network variant of multidimensional scaling, combined with Gaussian process regression (GPR) was identified as a preferred approach for generating 3D ALs that accounted for training compounds and their SAR characteristics with high accuracy. On the other hand, GPR-induced overfitting generally limited the accuracy of potency value predictions regardless of the projection method applied. However, 3D ALs enabled reliable mapping of test compounds with varying potency levels to corresponding AL regions. The most accurate mapping was achieved with NeuroScale models. Taken together, the results of our analysis indicate the high potential of 3D ALs for graphical SAR exploration and the identification of potent test compounds.

Development of R-Group Fingerprints Based on the Local Landscape from an Attachment Point of a Molecular Structure.

Molecular fingerprints are indispensable in medicinal chemistry for quantifying chemical structures. Fingerprints can be calculated for substructures with attachment points, which are positions where a substructure and a corresponding core structure connect. Because structures with attachment points can be crucial for understanding structure-activity relationships, fingerprints specialized for representing this structural feature are required. R-group fingerprints and R-group descriptors were proposed previously for this purpose; however, these molecular representations have limitations. Current R-group fingerprints do not emphasize information about attachment points, and R-group descriptors are too sensitive to changes in the topological path length from an attachment point. In the present work, we developed novel R-group fingerprints, termed R-path fingerprints, which contain substituent information from an attachment point without being sensitive to small differences in topological distances. The concept of the R-path fingerprints is to describe a chemical substructure from the viewpoint of an attachment point, to distinguish atomistic information around the attachment point and other parts of the substructure. This was achieved by considering all the paths on the shortest path between the attachment point and each atom in a substituent. Benchmark testing was conducted, including comparisons of similarity distributions and potency prediction for R-group substituents. The results showed that R-path fingerprints should be useful for classifying and comparing substructures with attachment points.

Evaluation of different virtual screening strategies on the basis of compound sets with characteristic core distributions and dissimilarity relationships.

In this work, computational compound screening strategies on the basis of two- and three-dimensional (2D and 3D) molecular representations were investigated including similarity searching and support vector machine (SVM) ranking. Calculations based on topological fingerprints and molecular shape queries and features were compared. A unique aspect of the analysis setting apart from previous comparisons of 2D and 3D virtual screening approaches has been the design of compound reference, training, and test data sets with controlled incremental increases in intra-set structural diversity and different categories of structural relationships between reference/training and test sets. The use of these data sets made it possible to assess the relative performance of 2D and 3D screening strategies under increasingly challenging conditions ultimately leading to the use of training and test sets with essentially unrelated structures. The results showed that 3D similarity searching had little advantage over 2D searching in identifying active compounds with remote structural relationships. However, 3D SVM models trained on the basis of shape features were superior to other approaches (including 2D SVM) when the detection of structure-activity relationships became increasingly challenging. Such 3D SVM methods has thus far only been little investigated in virtual screening, proving a wealth of opportunities for further analyses.

Exploring ensembles of bioactive or virtual analogs of X-ray ligands for shape similarity searching.

Shape similarity searching is a popular approach for ligand-based virtual screening on the basis of three-dimensional reference compounds. It is generally thought that well-defined experimentally determined binding modes of active reference compounds provide the best possible basis for shape searching. Herein, we show that experimental binding modes are not essential for successful shape similarity searching. Furthermore, we show that ensembles of analogs of X-ray ligands-in the absence of these ligands-further improve the search performance of single crystallographic reference compounds. This is even the case if ensembles of virtually generated analogs are used whose activity status is unknown. Taken together, the results of our study indicate that analog ensembles representing fuzzy reference states are effective starting points for shape similarity searching.

Inverse QSPR/QSAR Analysis for Chemical Structure Generation (from y to x).

Retrieving descriptor information (x information) from a value of an objective variable (y) is a fundamental problem in inverse quantitative structure-property relationship (inverse-QSPR) analysis but challenging because of the complexity of the preimage function. Herewith, we propose using a cluster-wise multiple linear regression (cMLR) model as a QSPR model for inverse-QSPR analysis. x information is acquired as a probability density function by combining cMLR and the prior distribution modeled with a mixture of Gaussians (GMMs). Three case studies were conducted to demonstrate various aspects of the potential of cMLR. It was found that the predictive power of cMLR was superior to that of MLR, especially for data with nonlinearity. Moreover, it turned out that the applicability domain could be considered since the posterior distribution inherits the prior distribution's feature (i.e., training data feature) and represents the possibility of having the desired property. Finally, a series of inverse analyses with the GMMs/cMLR was demonstrated with the aim to generate de novo structures having specific aqueous solubility.

Ring system-based chemical graph generation for de novo molecular design.

Generating chemical graphs in silico by combining building blocks is important and fundamental in virtual combinatorial chemistry. A premise in this area is that generated structures should be irredundant as well as exhaustive. In this study, we develop structure generation algorithms regarding combining ring systems as well as atom fragments. The proposed algorithms consist of three parts. First, chemical structures are generated through a canonical construction path. During structure generation, ring systems can be treated as reduced graphs having fewer vertices than those in the original ones. Second, diversified structures are generated by a simple rule-based generation algorithm. Third, the number of structures to be generated can be estimated with adequate accuracy without actual exhaustive generation. The proposed algorithms were implemented in structure generator Molgilla. As a practical application, Molgilla generated chemical structures mimicking rosiglitazone in terms of a two dimensional pharmacophore pattern. The strength of the algorithms lies in simplicity and flexibility. Therefore, they may be applied to various computer programs regarding structure generation by combining building blocks.

Chemography of natural product space.

We present the application of the generative topographic map algorithm to visualize the chemical space populated by natural products and synthetic drugs. Generative topographic maps may be used for nonlinear dimensionality reduction and probabilistic modeling. For compound mapping, we represented the molecules by two-dimensional pharmacophore features (chemically advanced template search descriptor). The results obtained suggest a close resemblance of synthetic drugs with natural products in terms of their pharmacophore features, despite pronounced differences in chemical structure. Generative topographic map-based cluster analysis revealed both known and new potential activities of natural products and drug-like compounds. We conclude that the generative topographic map method is suitable for inferring functional similarities between these two classes of compounds and predicting macromolecular targets of natural products.

Generalizability Improvement of Interpretable Symbolic Regression Models for Quantitative Structure-Activity Relationships.

In the pursuit of optimal quantitative structure-activity relationship (QSAR) models, two key factors are paramount: the robustness of predictive ability and the interpretability of the model. Symbolic regression (SR) searches for the mathematical expressions that explain a training data set. Thus, the models provided by SR are globally interpretable. We previously proposed an SR method that can generate interpretable expressions by humans. This study introduces an enhanced symbolic regression method, termed filter-induced genetic programming 2 (FIGP2), as an extension of our previously proposed SR method. FIGP2 is designed to improve the generalizability of SR models and to be applicable to data sets in which cost-intensive descriptors are employed. The FIGP2 method incorporates two major improvements: a modified domain filter to eradicate diverging expressions based on optimal calculation and the introduction of a stability metric to penalize expressions that would lead to overfitting. Our retrospective comparative analysis using 12 structure-activity relationship data sets revealed that FIGP2 surpassed the previously proposed SR method and conventional modeling methods, such as support vector regression and multivariate linear regression in terms of predictive performance. Generated mathematical expressions by FIGP2 were relatively simple and not divergent in the domain of function. Taken together, FIGP2 can be used for making interpretable regression models with predictive ability.

Large-scale prediction of activity cliffs using machine and deep learning methods of increasing complexity.

Activity cliffs (AC) are formed by pairs of structural analogues that are active against the same target but have a large difference in potency. While much of our knowledge about ACs has originated from the analysis and comparison of compounds and activity data, several studies have reported AC predictions over the past decade. Different from typical compound classification tasks, AC predictions must be carried out at the level of compound pairs representing ACs or nonACs. Most AC predictions reported so far have focused on individual methods or comparisons of two or three approaches and only investigated a few compound activity classes (from 2 to 10). Although promising prediction accuracy has been reported in most cases, different system set-ups, AC definitions, methods, and calculation conditions were used, precluding direct comparisons of these studies. Therefore, we have carried out a large-scale AC prediction campaign across 100 activity classes comparing machine learning methods of greatly varying complexity, ranging from pair-based nearest neighbor classifiers and decision tree or kernel methods to deep neural networks. The results of our systematic predictions revealed the level of accuracy that can be expected for AC predictions across many different compound classes. In addition, prediction accuracy did not scale with methodological complexity but was significantly influenced by memorization of compounds shared by different ACs or nonACs. In many instances, limited training data were sufficient for building accurate models using different methods and there was no detectable advantage of deep learning over simpler approaches for AC prediction. On a global scale, support vector machine models performed best, by only small margins compared to others including simple nearest neighbor classifiers.

Differences and similarities in cytokine profiles of macrophage activation syndrome in systemic lupus erythematosus and adult-onset Still's disease.

To clarify the differences and similarities in the cytokine profiles of macrophage activating syndrome (MAS) between systemic lupus erythematosus (SLE) and adult-onset Still's disease (AOSD). The study participants included 9 patients with MAS-SLE, 22 with non-MAS-SLE, 9 with MAS-AOSD, and 13 with non-MAS-AOSD. Serum cytokine levels were measured using a multiplex bead assay. Cytokine levels were compared between patients with SLE and AOSD with/without MAS. Moreover, cytokine patterns were examined using principal component analysis (PCA) and cluster analysis. IL-6, IL-8, IL-18, and TNF-α levels were elevated in patients with SLE and AOSD. IFN-α levels were elevated in SLE, whereas IL-1ß and IL-18 levels were elevated in AOSD. In SLE, IFN-α and IL-10 levels were higher in MAS than in non-MAS and controls. PCA revealed distinctive cytokine patterns in SLE and AOSD, SLE with IFN-α and IP-10, AOSD with IL-1ß, IL-6, and IL-18, and enhanced cytokine production in MAS. PCA and cluster analysis showed no differences in cytokine patterns between the MAS and non-MAS groups. However, serum ferritin levels were correlated with IFN-α levels in SLE. Cytokine profiles differed between SLE and AOSD but not between MAS and non-MAS. MAS is induced by the enhancement of underlying cytokine abnormalities rather than by MAS-specific cytokine profiles. Type I IFN may be involved in MAS development in patients with SLE.

Screening and Validation of Odorants against Influenza A Virus Using Interpretable Regression Models.

Influenza is a respiratory infection caused by the influenza virus that is prevalent worldwide. One of the most contagious variants of influenza is influenza A virus (IAV), which usually spreads in closed spaces through aerosols. Preventive measures such as novel compounds are needed that can act on viral membranes and provide a safe environment against IAV infection. In this study, we screened compounds with common fragrances that are generally used to mask unpleasant odors but can also exhibit antiviral activity against a strain of IAV. Initially, a set of 188 structurally diverse odorants were collected, and their antiviral activity was measured in vapor phase against the IAV solution. Regression models were built for the prediction of antiviral activity using this set of odorants by taking into account their structural features along with vapor pressure and partition coefficient (n-octanol/water). The models were interpreted using a feature weighting approach and Shapley Additive exPlanations to rationalize the predictions as an additional validation for virtual screening. This model was used to screen odorants from an in-house odorant data set consisting of 2020 odorants, which were later evaluated using in vitro experiments. Out of 11 odorants proposed using the final model, 8 odorants were found to exhibit antiviral activity. The feature interpretation of screened odorants suggested that they contained hydrophilic substructures, such as hydroxyl group, which might contribute to denaturation of proteins on the surface of the virus. These odorants should be explored as a preventive measure in closed spaces to decrease the risk of infections of IAV.