Human identification: an investigation of 3D models of paranasal sinuses to establish a biological profile on a modern UK population.

Medical imaging is a valuable source for facilitating empirical research and provides an accessible gateway for developing novel forensic anthropological methods for analysis including 3D modelling. This is especially critical for the United Kingdom (UK), where methods developed from modern UK populations do not currently exist. This study introduces a new approach to assist in human identification using 3D models of the paranasal sinuses. The models were produced from a database of 500 modern CT scans provided by University College London Hospital. Linear measurements and elliptic Fourier coefficients taken from 1500 three-dimensional models across six ethnic groups assessed by one-way ANOVA and discriminant function analysis showed a range of classification rates with certain rates reaching 75-85.7% (p < 0.05) in correctly classifying age and sex according to size and shape. The findings offer insights into the potential for employing paranasal sinuses as an attribute for establishing the identification of unknown human remains in future crime reconstructions.

A method to induce stress in human subjects in online research environments.

This paper presents a method to induce stress in human subjects during online participation in research studies without the presence of researchers. In this study, participants in the stress-inducing condition (N = 52, 44%) were asked to answer general knowledge and mathematical questions which people often get wrong, and did so under time pressure as well as receiving feedback. In contrast, participants in the control condition (N = 66, 56%) did not have time pressure or receive feedback. The stress manipulation was found to be effective, as the reported state anxiety and visual analog scale on stress scores were higher for the stress group than for the non-stress group (both findings, p < 0.001). Consistent findings were found when accounting for trait anxiety as a moderator, with the exception of the state anxiety levels in high trait anxiety group. This stressing method combines the established stress conditions of uncontrollability (such as time pressures) and social evaluative threats (such as negative feedback). In addition, the method contains specific measures (such as a commitment statement and attention check questions) to enhance the internal validity by preventing and detecting cheating or random responses. This method can be deployed through any commonly available online software. It offers a simple and cost-effective way to collect data online - which fits the increasing need to carry out research in virtual and online environments.

A multi-method assessment of 3D printed micromorphological osteological features.

The evaluation of 3D printed osteological materials has highlighted the difficulties associated with accurately representing fine surface details on printed bones. Moreover, there is an increasing need for reconstructions to be demonstrably accurate and reliable for use in the criminal justice system. The aim of this study was to assess the surface quality of 3D prints (n = 9) that presented with micromorphological alterations from trauma, taphonomy and pathology processes. The archaeological bones were imaged using micro-CT scanning and 3D printed with selective laser sintering (SLS) printing. A multi-method experimental approach subsequently identified: (1) the 3D printed bones to be metrically accurate to within 1.0 mm; (2) good representation of micromorphological surface features overall, albeit with some loss of intricate details, depths, and fine textures that can be important for visual processing; (3) five of the nine 3D printed bones were quantitatively scored as accurate using the visual comparison method; and, (4) low mesh comparison distances (± 0.2 mm) between the original models and the digitised 3D print models. The findings offer empirical data that can be used to underpin 3D printed reconstructions of exhibits for use in courts of law. In addition, an adaptable pathway was presented that can be used to assess 3D print accuracy in future reconstructions.

Quantitative analysis of 11-dehydrocorticosterone and corticosterone for preclinical studies by liquid chromatography/triple quadrupole mass spectrometry.

RATIONALE: The activity of the glucocorticoid activating enzyme 11ß-hydroxysteroid dehydrogenase type-1 (11ßHSD1) is altered in diseases such as obesity, inflammation and psychiatric disorders. In rodents 11ßHSD1 converts inert 11-dehydrocorticosterone (11-DHC) into the active form, corticosterone (CORT). A sensitive, specific liquid chromatography/tandem mass spectrometry method was sought to simultaneously quantify total 11-DHC and total and free CORT in murine plasma for simple assessment of 11ßHSD1 activity in murine models. METHODS: Mass spectrometry parameters were optimised and a method for the chromatographic separation of CORT and 11-DHC was developed. Murine plasma was prepared by 10:1 chloroform liquid-liquid extraction (LLE) for analysis. Limits of quantitation (LOQs), linearity and other method criteria were assessed, according to bioanalytical method validation guidelines. RESULTS: Reliable separation of 11-DHC and CORT was achieved using an ACE Excel 2 C18-AR (2.1 × 150 mm; 2 µm) fused core column at 25°C, with an acidified water/acetonitrile gradient over 10 min. Analytes were detected by multiple reaction monitoring after positive electrospray ionisation (m/z 345.1.1 ➔ 121.2, m/z 347.1 ➔ 121.1 for 11-DHC and CORT, respectively). The LOQs were 0.25 and 0.20 ng/mL for 11-DHC and CORT, respectively. CONCLUSIONS: This LC/MS method is suitable for the reliable analysis of 11-DHC and CORT following simple LLE of murine plasma, bringing preclinical analysis in line with recommendations for clinical endocrinology and biochemistry.

Supporting aboriginal and Torres Strait islander cultural educators and cultural mentors in Australian general practice education.

BACKGROUND: Promoting cultural competence of health professionals working with Aboriginal and Torres Strait Islander communities is key to improving health outcomes. Cultural Educators and Cultural Mentors (CE/ CMs) have critical roles in Australian general practice training, yet these are not well understood. METHODS: Guided by a CE/CM Network, our research team including experienced CE/CMs, used surveys and semi-structured interviews to explore these roles and investigate best practice in employment and support. Participants sampled from stakeholders involved in general practice education across Australia included CE/CMs, Medical Educators, General Practice Supervisors and Registrars, and representatives of Regional Training Organisations, Indigenous Health Training Posts and other key organisations. We undertook thematic analysis using a framework approach, refined further in team discussions that privileged views of CE/ CM members. RESULTS: Participants comprised 95 interviewees and 55 survey respondents. We organised our findings under three overarching themes: understandings about cultural education and mentoring; employment and support of CE/CMs; and delivery and evaluation of cultural education and mentoring. Our findings supported a central role for Aboriginal and Torres Strait Islander CE/CMs in face-to-face Registrar education about culture and history and related impacts on health and healthcare. Cultural education was reported to provide base-line learning as preparation for clinical practice whilst cultural mentoring was seen as longitudinal, relationship-based learning. Mentoring was particularly valued by Registrars working in Aboriginal and Torres Strait Islander communities. Challenges described with employment and support included difficulties in finding people with skills and authority to undertake this demanding work. Remuneration was problematic, particularly for CMs whose work-time is difficult to quantify, and who are often employed in other roles and sometimes not paid. Other improved support recommended included appropriate employment terms and conditions, flexibility in role definitions, and professional development. Recommendations concerning implementation and evaluation included valuing of cultural education, greater provision of mentoring, partnerships with Medical Educators, and engagement of CE/CMs in rigorous evaluation and assessment processes. CONCLUSIONS: Our research highlights the importance of the unique CE/CM roles and describes challenges in sustaining them. Professional and organisational support is needed to ensure delivery of respectful and effective cultural education within general practitioner training.

Correction to: Supporting Aboriginal and Torres Strait islander cultural educators and cultural mentors in Australian general practice education.

Following publication of the original article [1], the author reported that Fig. 1 was missing.

The suitability of visual taphonomic methods for digital photographs: An experimental approach with pig carcasses in a tropical climate.

In the context of increased scrutiny of the methods in forensic sciences, it is essential to ensure that the approaches used in forensic taphonomy to measure decomposition and estimate the postmortem interval are underpinned by robust evidence-based data. Digital photographs are an important source of documentation in forensic taphonomic investigations but the suitability of the current approaches for photographs, rather than real-time remains, is poorly studied which can undermine accurate forensic conclusions. The present study aimed to investigate the suitability of 2D colour digital photographs for evaluating decomposition of exposed human analogues (Sus scrofa domesticus) in a tropical savanna environment (Hawaii), using two published scoring methods; Megyesi et al., 2005 and Keough et al., 2017. It was found that there were significant differences between the real-time and photograph decomposition scores when the Megyesi et al. method was used. However, the Keough et al. method applied to photographs reflected real-time decomposition more closely and thus appears more suitable to evaluate pig decomposition from 2D photographs. The findings indicate that the type of scoring method used has a significant impact on the ability to accurately evaluate the decomposition of exposed pig carcasses from photographs. It was further identified that photographic taphonomic analysis can reach high inter-observer reproducibility. These novel findings are of significant importance for the forensic sciences as they highlight the potential for high quality photograph coverage to provide useful complementary information for the forensic taphonomic investigation. New recommendations to develop robust transparent approaches adapted to photographs in forensic taphonomy are suggested based on these findings.

A systematic analysis of misleading evidence in unsafe rulings in England and Wales.

Evidence has the potential to be misleading if its value when expressing beliefs in hypotheses is not fully understood or presented. Although the knowledge base to understand uncertainties is growing, a challenge remains to prioritise research and to continuously assess the magnitude and consequences of misleading evidence in criminal cases. This study used a systematic content analysis to identify misleading evidence, drawing information from case transcripts of rulings argued unsafe by the Court of Appeal of England and Wales. In the 7-year study period, 218 applications were successful on appeal, containing 235 cases of misleading evidence. The majority (76%) of successful appeals were based upon the same materials available in the original trial, rather than the presentation of new relevant information. Witness (39%), forensic (32%), and character evidence (19%) were the most commonly observed evidence types, with the validity of witnesses (26%), probative value of forensic evidence (12%), and relevance of character evidence (10%) being the most prevalent combinations of identified issues. Additionally, the majority (66%) of misleading evidence types relate to their interpretation at activity level. The findings suggest that many of these misleading aspects could have been prevented by providing more transparency in the relationship between evidence and hypotheses. Generally, the results contribute to gaining a more complete picture of the role of misleading evidence in the criminal justice system.

Extensive unusual lesions on a large number of immersed human victims found to be from cookiecutter sharks (Isistius spp.): an examination of the Yemenia plane crash.

Accurate determination of the origin and timing of trauma is key in medicolegal investigations when the cause and manner of death are unknown. However, distinction between criminal and accidental perimortem trauma and postmortem modifications can be challenging when facing unidentified trauma. Postmortem examination of the immersed victims of the Yemenia airplane crash (Comoros, 2009) demonstrated the challenges in diagnosing extensive unusual circular lesions found on the corpses. The objective of this study was to identify the origin and timing of occurrence (peri- or postmortem) of the lesions.A retrospective multidisciplinary study using autopsy reports (n = 113) and postmortem digital photos (n = 3 579) was conducted. Of the 113 victims recovered from the crash, 62 (54.9 %) presented unusual lesions (n = 560) with a median number of 7 (IQR 3 ∼ 13) and a maximum of 27 per corpse. The majority of lesions were elliptic (58 %) and had an area smaller than 10 cm2 (82.1 %). Some lesions (6.8 %) also showed clear tooth notches on their edges. These findings identified most of the lesions as consistent with postmortem bite marks from cookiecutter sharks (Isistius spp.). It suggests that cookiecutter sharks were important agents in the degradation of the corpses and thus introduced potential cognitive bias in the research of the cause and manner of death. A novel set of evidence-based identification criteria for cookiecutter bite marks on human bodies is developed to facilitate more accurate medicolegal diagnosis of cookiecutter bites.

Understanding forensic expert evaluative evidence: A study of the perception of verbal expressions of the strength of evidence.

Verbal expressions of evidential strength are routinely used when presenting forensic expert evaluative evidence. The degree to which these verbal expressions are interpreted uniformly among different individuals requires further empirical study. This study focussed on groups of individuals with different roles within the criminal justice system and individuals with varying degrees of expertise and knowledge. Three groups of individuals were identified: laypeople, legal professionals and those with some forensic or investigative knowledge. The participants in the study (n=230) were provided with a case summary to which a verbal expression of the strength of evidence was randomly assigned. Participants were subsequently invited to indicate their perception of the strength of the evidence on a scale that was provided. Generally, across the study groups, the trend was one of increased perceived strength of evidence as the intended strength of the verbal expression was increased, with some notable exceptions. In general, there was good concordance between the groups in the way the different expressions were perceived. It was found that participants performed poorly when it came to differentiating between expressions at the 'strong' end of the scale ('strong', 'very strong' and 'extremely strong'). The findings resonate with calls for validated and robust communication frameworks for evaluative opinions. Further empirical research in this area is warranted and that such research can represent an important contribution towards improving the communication and presentation of forensic evidence.

Morphological Variations of Explosive Residue Particles and Implications for Understanding Detonation Mechanisms.

The possibility of recovering undetonated explosive residues following detonation events is well-known; however, the morphology and chemical identity of these condensed phase postblast particles remains undetermined. An understanding of the postblast explosive particle morphology would provide vital information during forensic examinations, allowing rapid initial indication of the explosive material to be microscopically determined prior to any chemical analyses and thereby saving time and resources at the crucial stage of an investigation. In this study, condensed phase particles collected from around the detonations of aluminized ammonium nitrate and RDX-based explosive charges were collected in a novel manner utilizing SEM stubs. By incorporating the use of a focused ion beam during analysis, for the first time it is possible to determine that such particles have characteristic shapes, sizes, and internal structures depending on the explosive and the distance from the detonation at which the particles are recovered. Spheroidal particles (10-210 µm) with microsurface features recovered following inorganic charge detonations were dissimilar to the irregularly shaped particles (5-100 µm) recovered following organic charge firings. Confirmatory analysis to conclude that the particles were indeed explosive included HPLC-MS, Raman spectroscopy, and mega-electron volt-secondary ionization mass spectrometry. These results may impact not only forensic investigations but also the theoretical constructs that govern detonation theory by indicating the potential mechanisms by which these particles survive and how they vary between the different explosive types.

Analysis of transferred fragrance and its forensic implications.

Perfumes are widely used by many people in developed countries, and a large number of both men and women wear perfumes on a daily basis. Analysis of perfume trace materials from clothing is not commonly employed within forensic casework, yet as a form of trace evidence it has the potential to provide valuable intelligence. In order to appreciate the value of trace evidence there is a fundamental need for an evidence base that can both offer insight into how a trace material behaves under different scenarios and activities, and from which inferences can be made. With this purpose a gas chromatography-mass spectrometry method for trace analysis of perfumes was developed. This paper presents two different series of experiments that investigate the dynamics of perfume transfer as a factor of perfume ageing time, and as a factor of perfume contact time. Empirical data showed that both perfume ageing time, and perfume contact time play a key role in the number of perfume components transferred. These studies have implication for forensic protocols, specifically for perfume trace evidence collection, analysis, interpretation, and presentation, and there is potentially great value in analysing perfumes from clothing exhibits in forensic enquiries that involve close contact between individuals, such as sexual assaults.

The retrieval of fingerprint friction ridge detail from elephant ivory using reduced-scale magnetic and non-magnetic powdering materials.

An evaluation of reduced-size particle powdering methods for the recovery of usable fingermark ridge detail from elephant ivory is presented herein for the first time as a practical and cost-effective tool in forensic analysis. Of two reduced-size powder material types tested, powders with particle sizes ≤ 40 µm offered better chances of recovering ridge detail from unpolished ivory in comparison to a conventional powder material. The quality of developed ridge detail of these powders was also assessed for comparison and automated search suitability. Powder materials and the enhanced ridge detail on ivory were analysed by scanning electron microscopy and energy dispersive X-ray spectroscopy and interactions between their constituents and the ivory discussed. The effect of ageing on the quality of ridge detail recovered showed that the best quality was obtained within 1 week. However, some ridge detail could still be developed up to 28 days after deposition. Cyanoacrylate and fluorescently-labelled cyanoacrylate fuming of ridge detail on ivory was explored and was less effective than reduced-scale powdering in general. This research contributes to the understanding and potential application of smaller scale powdering materials for the development of ridge detail on hard, semi-porous biological material typically seized in wildlife-related crimes.

Fingermark submission decision-making within a UK fingerprint laboratory: Do experts get the marks that they need?

Within UK policing it is routinely the responsibility of fingerprint laboratory practitioners to chemically develop areas of latent fingerprint ridge detail on evidential items and to determine which areas of ridge detail are of sufficient quality to be submitted to fingerprint experts for search or comparison against persons of interest. This study assessed the effectiveness of the fingermark submission process within the Evidence Recovery Unit Fingerprint Laboratory of the Metropolitan Police Service. Laboratory practitioners were presented with known source fingermark images previously deemed identifiable or insufficient by fingerprint experts, and were asked to state which of the marks they would forward to the Fingerprint Bureau. The results indicated that practitioners forwarded a higher percentage of insufficient fingermarks than is acceptable according to current laboratory guidelines, and discarded a number of marks that were of sufficient quality for analysis. Practitioners forwarded more insufficient fingermarks when considering fingermarks thought to be related to a murder and discarded more sufficient fingermarks when considering those thought to be related to a crime of 'theft from vehicle'. The results highlight the need for fingerprint laboratories to work alongside fingerprint experts to ensure that a consistent approach to decision-making is, as far as possible, achieved, and that appropriate thresholds are adopted so as to prevent the loss of valuable evidence and improve the efficiency of the fingerprint filtering process.

Cognitive bias in forensic anthropology: visual assessment of skeletal remains is susceptible to confirmation bias.

An experimental study was designed to examine cognitive biases within forensic anthropological non-metric methods in assessing sex, ancestry and age at death. To investigate examiner interpretation, forty-one non-novice participants were semi randomly divided into three groups. Prior to conducting the assessment of the skeletal remains, two of the groups were given different extraneous contextual information regarding the sex, ancestry and age at death of the individual. The third group acted as a control group with no extraneous contextual information. The experiment was designed to investigate if the interpretation and conclusions of the skeletal remains would differ amongst participants within the three groups, and to assess whether the examiners would confirm or disagree with the given extraneous context when establishing a biological profile. The results revealed a significant biasing effect within the three groups, demonstrating a strong confirmation bias in the assessment of sex, ancestry and age at death. In assessment of sex, 31% of the participants in the control group concluded that the skeleton remains were male. In contrast, in the group that received contextual information that the remains were male, 72% concluded that the remains were male, and in the participant group where the context was that the remains were of a female, 0% of the participants concluded that the remains were male. Comparable results showing bias were found in assessing ancestry and age at death. These data demonstrate that cognitive bias can impact forensic anthropological non-metric methods on skeletal remains and affects the interpretation and conclusions of the forensic scientists. This empirical study is a step in establishing an evidence base approach for dealing with cognitive issues in forensic anthropological assessments, so as to enhance this valuable forensic science discipline.

Comparison of DNA recovery methods and locations from regularly-worn hooded jumpers before and after use by a second wearer.

Items of worn clothing are routinely examined for DNA in forensic casework, commonly with the expectation that at least some of the DNA will come from a wearer of the item, so-called 'wearer DNA'. This study investigated DNA recovered from hooded jumpers that were regularly worn and laundered for four weeks and then subsequently worn by a different individual for four hours. This study also systematically investigated whether using different recovery methods or sampling locations on the jumpers might distinguish between DNA deposited by the regular and most recent wearers of clothing. Four volunteers each wore a new hooded jumper regularly (6 h/day, 2 days/week, washed at weekends) during two 4-week periods. At the end of each month, DNA was first recovered by cutting out and mini-taping the inside left cuff, half-collar, pocket and underarm fabric. The jumpers were then worn by a different individual for four hours, and DNA was again recovered by cutting out and mini-taping, but this time from the inside right cuff, half-collar, pocket and underarm fabric. All DNA samples (n = 128) were quantified and profiled. DNA quantities ranged from 0 to âˆ¼40 ng with an outlier of âˆ¼150 ng, and no significant differences were observed among recovery methods and sampling locations, nor whether one or two wearers had worn the jumpers. However, one volunteer consistently deposited significantly more DNA to their jumpers than two other volunteers, confirming the impact of 'shedder status' on DNA deposition during wearing of clothing. When jumpers were regularly worn by one wearer, the majority (72.7-83.3 %) of the samples for all wearers across both months comprised a major profile of the wearer with a minor profile of non-wearer alleles. When jumpers were then worn by a second wearer, the composition of the profiles obtained were generally reproducible across the recovery methods used, the sampling locations and the two replicates of the experiment for each pairing of wearers. However, profile compositions differed between wearer pairings. Overall, ∼60 % of profiles obtained gave a major profile of the regular wearer, whereas âˆ¼30 % gave a major profile of the second wearer. The remaining profiles comprised other much less frequent observations of single-source profiles of each wearer and equal proportions of DNA from both wearers. Non-wearer DNA was also observed in the majority of samples, both before and after jumpers were worn by a second wearer. For one volunteer's jumpers, a recurring non-wearer DNA profile was observed that could be attributed to their romantic partner, and this DNA persisted on the jumpers even after being worn by the second wearer. This study provides insight on the impact of shedder status, multiple wearers, different recovery methods and sampling locations on the quantities of DNA and compositions of DNA profiles recovered from authentically regularly-worn hooded jumpers. The findings also provide a preliminary dataset that can be used to infer activity level probabilities in casework.

Unpacking workplace stress and forensic expert decision-making: From theory to practice.

Workplace stress can affect forensic experts' job satisfaction and performance, which holds financial and other implications for forensic service providers. Therefore, it is important to understand and manage workplace stress, but that is not simple or straightforward. This paper explores stress as a human factor that influences forensic expert decision-making. First, we identify and highlight three factors that mitigate decisions under stress conditions: nature of decision, individual differences, and context of decision. Second, we situate workplace stress in forensic science within the Challenge-Hindrance Stressor Framework. We argue that stressors in forensic science workplaces can have a positive or a negative impact, depending on the type, level, and context of stress. Developing an understanding of the stressors, their sources, and their possible impact can help forensic service providers and researchers to implement context-specific interventions to manage stress at work and optimize expert performance.

A practical approach to supported liquid extraction and measurement of 18 steroids in plasma and serum by targeted liquid chromatography tandem mass spectrometry.

Chromatography combined with mass spectrometry is a gold standard technique for steroid measurement, however the type of sample preparation, the dynamic range and reliability of the calibration curve, the chromatographic separation and mass spectrometry settings ultimately determine the success of the method. The steroid biosynthetic pathway is conserved in higher mammals and literature demonstrates that the concentration ranges of different steroid groups are relatively comparable across species. We sought to develop a robust and reliable multi steroid targeted analysis method for blood that would have wide application across higher mammals. The method was developed following bioanalytical method validation guidelines to standards typically applied to human clinical studies, including isotopically labelled internal standards where at all possible. Here we describe the practical approach to a 96-well supported liquid extraction (SLE) method of extraction from plasma (200 µL) using an Extrahera liquid handling robot (Biotage, Sweden), including quality control samples, followed by a comprehensive separation and targeted LC-MS/MS analysis of 18 steroids in plasma (pregnenolone, progesterone, 17α-hydroxyprogesterone, 11-deoxycorticosterone, corticosterone, 11-dehydrocorticosterone, aldosterone, 11-deoxycortisol, 21-deoxycortisol, cortisol, cortisone, androstenedione, testosterone, 5α-dihydrotestosterone, dehydroepiandrosterone, estrone, 17ß-estradiol and estriol). •SLE in a 96-well format of up to 74 biological plasma samples, enriched with multiple isotopically labelled internal standards, a 12-point aqueous calibration curve, and 6 serum quality controls, designed to monitor long-term performance of the method•Chromatographic separation of multiple steroids along the gradient, with ammonium fluoride mobile phase additive to improve sensitivity, followed by electrospray ionisation and constant polarity switching•Aqueous calibration standards that cover physiologically relevant ranges - high nanomolar glucocorticoids, low nanomolar androgens and picomolar ranges for estrogens and steroid intermediates.

ATP-binding cassette family C member 1 constrains metabolic responses to high-fat diet in male mice.

Glucocorticoids modulate glucose homeostasis, acting on metabolically active tissues such as liver, skeletal muscle, and adipose tissue. Intracellular regulation of glucocorticoid action in adipose tissue impacts metabolic responses to obesity. ATP-binding cassette family C member 1 (ABCC1) is a transmembrane glucocorticoid transporter known to limit the accumulation of exogenously administered corticosterone in adipose tissue. However, the role of ABCC1 in the regulation of endogenous glucocorticoid action and its impact on fuel metabolism has not been studied. Here, we investigate the impact of Abcc1 deficiency on glucocorticoid action and high-fat-diet (HFD)-induced obesity. In lean male mice, deficiency of Abcc1 increased endogenous corticosterone levels in skeletal muscle and adipose tissue but did not impact insulin sensitivity. In contrast, Abcc1-deficient male mice on HFD displayed impaired glucose and insulin tolerance, and fasting hyperinsulinaemia, without alterations in tissue corticosterone levels. Proteomics and bulk RNA sequencing revealed that Abcc1 deficiency amplified the transcriptional response to an obesogenic diet in adipose tissue but not in skeletal muscle. Moreover, Abcc1 deficiency impairs key signalling pathways related to glucose metabolism in both skeletal muscle and adipose tissue, in particular those related to OXPHOS machinery and Glut4. Together, our results highlight a role for ABCC1 in regulating glucose homeostasis, demonstrating diet-dependent effects that are not associated with altered tissue glucocorticoid concentrations.

The spatial distribution of postblast RDX residue: forensic implications.

Locating exactly where trace explosive residue samples should be sought during sample collection at bomb scenes is not specified in the published literature or guidelines; in this area, it is generally acknowledged that forensic practices are based on tradition rather than evidence. This study investigated patterns in the spatial distribution of postblast 1,3,5-trinitro-1,3,5-triazocyclohexane residue from a series of unconfined detonations, over a range of sampling sites, and at two different detonation heights. The amount of residue recovered from the sites decreased as a function of distance from the center of the explosion. [Correction added after online publication 27 December 2012: In the preceding sentence, "increased" was corrected to "decreased" to agree with the conclusion of the article.] As the height of the detonations increased, more residues were found from all sampling sites. The findings of this empirical study have a number of important practical implications including determining where residue samples are best sought at crime scenes.