AP-XPS beamline, a platform for operando science at Pohang Accelerator Laboratory.

Beamline 8A (BL 8A) is an undulator-based soft X-ray beamline at Pohang Accelerator Laboratory. This beamline is aimed at high-resolution ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), soft X-ray absorption spectroscopy (soft-XAS) and scanning photoemission microscopy (SPEM) experiments. BL 8A has two branches, 8A1 SPEM and 8A2 AP-XPS, that share a plane undulator, the first mirror (M1) and the monochromator. The photon beam is switched between the two branches by changing the refocusing mirrors after the monochromator. The acceptance angle of M1 is kept glancing at 1.2°, and Pt is coated onto the mirrors to achieve high reflectance, which ensures a wide photon energy range (100-2000 eV) with high resolution at a photon flux of ∼1013 photons s-1. In this article, the main properties and performance of the beamline are reported, together with selected experiments performed on the new beamline and experimental system.

Correlation between structural phase transition and surface chemical properties of thin film SrRuO3/SrTiO3 (001).

The correlation between the structural phase transition (SPT) and oxygen vacancy in SrRuO3 (SRO) thin films was investigated by in situ X-ray diffraction (XRD) and ambient pressure X-ray photoelectron spectroscopy (AP-XPS). In situ XRD shows that the SPT occurs from a monoclinic SRO phase to a tetragonal SRO phase near ∼200 °C, regardless of the pressure environment. On the other hand, significant core level shifts in both the Ru and Sr photoemission spectra are found under ultrahigh vacuum, but not under the oxygen pressure environment. The directions and behavior of the core level shift of Ru and Sr are attributed to the formation of oxygen vacancy across the SPT temperature of SRO. The analysis of in situ XRD and AP-XPS results provides an evidence for the formation of metastable surface oxide possibly due to the migration of internal oxygen atoms across the SPT temperature, indicating the close relationship between oxygen vacancy and SPT in SRO thin films.

Design Principle of Fe-N-C Electrocatalysts: How to Optimize Multimodal Porous Structures?

The effect of porous structures on the electrocatalytic activity of N-doped carbon is studied by using electrochemical analysis techniques and the result is applied to synthesize highly active and stable Fe-N-C catalyst for oxygen reduction reaction (ORR). We developed synthetic procedures to prepare three types of N-doped carbon model catalysts that are designed for systematic comparison of the porous structures. The difference in their catalytic activity is investigated in relation to the surface area and the electrochemical parameters. We found that macro- and mesoporous structures contribute to different stages of the reaction kinetics. The catalytic activity is further enhanced by loading the optimized amount of Fe to prepare Fe-N-C catalyst. In both N-doped carbon and Fe-N-C catalysts, the hierarchical porous structure improved electrocatalytic performance in acidic and alkaline media. The optimized catalyst exhibits one of the best ORR performance in alkaline medium with excellent long-term stability in anion exchange membrane fuel cell and accelerated durability test. Our study establishes a basis for rationale design of the porous carbon structure for electrocatalytic applications.

Element selective oxidation on Rh-Pd bimetallic alloy surfaces.

The interactions between oxygen and Rh-Pd bimetallic alloy surfaces were investigated using surface sensitive experimental techniques and density functional theory calculations. The alloy surfaces were oxidized under 10-5 Torr and 100 mTorr oxygen upon heating above 250 °C. A thin Rh oxide layer was preferentially formed on a Rh1Pd9(100) surface, while a thin Pd oxide layer was formed on a Rh1Pd9(111) surface, though the Rh oxide is thermodynamically more stable irrespective of the surface orientation. Chemical analyses revealed that the initial Rh fraction for the (111) surface was significantly lower than that for the (100) surface, which suggests that the oxidized element on the surface is kinetically selected depending on the near surface initial composition.

Highly Durable and Active PtFe Nanocatalyst for Electrochemical Oxygen Reduction Reaction.

Demand on the practical synthetic approach to the high performance electrocatalyst is rapidly increasing for fuel cell commercialization. Here we present a synthesis of highly durable and active intermetallic ordered face-centered tetragonal (fct)-PtFe nanoparticles (NPs) coated with a "dual purpose" N-doped carbon shell. Ordered fct-PtFe NPs with the size of only a few nanometers are obtained by thermal annealing of polydopamine-coated PtFe NPs, and the N-doped carbon shell that is in situ formed from dopamine coating could effectively prevent the coalescence of NPs. This carbon shell also protects the NPs from detachment and agglomeration as well as dissolution throughout the harsh fuel cell operating conditions. By controlling the thickness of the shell below 1 nm, we achieved excellent protection of the NPs as well as high catalytic activity, as the thin carbon shell is highly permeable for the reactant molecules. Our ordered fct-PtFe/C nanocatalyst coated with an N-doped carbon shell shows 11.4 times-higher mass activity and 10.5 times-higher specific activity than commercial Pt/C catalyst. Moreover, we accomplished the long-term stability in membrane electrode assembly (MEA) for 100 h without significant activity loss. From in situ XANES, EDS, and first-principles calculations, we confirmed that an ordered fct-PtFe structure is critical for the long-term stability of our nanocatalyst. This strategy utilizing an N-doped carbon shell for obtaining a small ordered-fct PtFe nanocatalyst as well as protecting the catalyst during fuel cell cycling is expected to open a new simple and effective route for the commercialization of fuel cells.

A high-pressure-induced dense CO overlayer on a Pt(111) surface: a chemical analysis using in situ near ambient pressure XPS.

We investigated the high-density CO adsorption phase formed on a Pt(111) surface when exposed to CO gas of pressure ranging from UHV to 100 mTorr using near-ambient-pressure (NAP)-XPS. Combined results from the NAP-XPS measurements and DFT calculations reveal the adsorption structure of CO molecules in the dense CO overlayer, which is stable under realistic conditions.

Effect of Bias Potential on the Interface of a Solid Electrolyte and Electrode during XPS Depth Profiling Analysis.

Depth profiling is an essential method to investigate the physical and chemical properties of a solid electrolyte and electrolyte/electrode interface. In conventional depth profiling, various spectroscopic tools such as X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) are utilized to monitor the chemical states along with ion bombardment to etch a sample. Nevertheless, the ion bombardment during depth profiling results in an inevitable systematic error, i.e., the accumulation of mobile ions at the electrolyte/electrode interface, known as the ion pile-up phenomenon. Here, we propose a novel method using bias potential, the substrate-bias method, to prevent the ion pile-up phenomena during depth profiling of a solid electrolyte. When the positive bias potential is applied on the substrate (electrode), the number of accumulating ions at the electrolyte/electrode interface is significantly reduced. The in-depth XPS analysis with the biased electrode reveals not only the suppression of the ion pile-up phenomena but also the altered chemical states at the interfacial region between the electrolyte and electrode depending on the bias. The proposed substrate-bias method can be a good alternative scheme for an efficient yet precise depth profiling technique for a solid electrolyte.

Study of CO2 Adsorption Properties on the SrTiO3(001) Surface with Ambient Pressure XPS.

The adsorption properties of CO2 on the SrTiO3(001) surface were investigated using ambient pressure X-ray photoelectron spectroscopy under elevated pressure and temperature conditions. On the Nb-doped TiO2-enriched (1 × 1) SrTiO3 surface, CO2 adsorption, i.e., the formation of CO3 surface species, occurs first at the oxygen lattice site under 10-6 mbar CO2 at room temperature. The interaction of CO2 molecules with oxygen vacancies begins when the CO2 pressure increases to 0.25 mbar. The adsorbed CO3 species on the Nb-doped SrTiO3 surface increases continuously as the pressure increases but starts to leave the surface as the surface temperature increases, which occurs at approximately 373 K on the defect-free surface. On the undoped TiO2-enriched (1 × 1) SrTiO3 surface, CO2 adsorption also occurs first at the lattice oxygen sites. Both the doped and undoped SrTiO3 surfaces exhibit an enhancement of the CO3 species with the presence of oxygen vacancies, thus indicating the important role of oxygen vacancies in CO2 dissociation. When OH species are removed from the undoped SrTiO3 surface, the CO3 species begin to form under 10-6 mbar at 573 K, thus indicating the critical role of OH in preventing CO2 adsorption. The observed CO2 adsorption properties of the various SrTiO3 surfaces provide valuable information for designing SrTiO3-based CO2 catalysts.

An etched nanoporous Ge anode in a novel metal-air energy conversion cell.

We first report the successful synthesis of porous germanium with ordered hierarchical structures, via controlled etching, and show its performance as an anode in a new metal-air battery. Our experimental results demonstrate the potential use of porous germanium in a high power density Ge-air energy conversion cell, showing a stable long-term discharge profile at various current drains.

Spectroscopic assessment of the role of hydrogen in surface defects, in the electronic structure and transport properties of TiO2, ZnO and SnO2 nanoparticles.

The interaction of metal oxides with gases is very important for the operation of energy devices such as fuel cells and gas sensors, and also relevant for materials synthesis and processing. The electronic transport properties of metal oxides for the aforementioned devices strongly depend on the chemistry of these gases and on the presence or absence of defects on the surface and in the bulk. The Debye screening length is in this respect a material specific property which becomes particularly significant when the material is comprised of nanoparticles. In the present study, poly-crystalline TiO(2), ZnO and SnO(2) nanoparticles were synthesized by a high temperature flame spray combustion process and investigated for their interaction with hydrogen. The chemistry of the reduced and oxidized surfaces of these metal oxides, where the interaction with gases takes place, was investigated in detail with X-ray photoelectron spectroscopy (XPS). The transitions found near E(F) with XPS are consistent with those found by diffuse reflectance spectroscopy (DRS) and were assigned to surface states originating from non-equilibrium oxygen vacancies. We show how the non-stoichiometric character of the metal oxide surface constitutes electronic surface defects, in particular oxygen vacancies which allow for additional transitions near the Fermi energy (E(F)). The concentration of these surface defects can be strongly reduced by thermal after-treatment under air or increased by Ar(+)-sputtering, after which significant spectral features appear near E(F). Such prominent changes are particularly observed for TiO(2) and SnO(2), whereas the stoichiometry of the ZnO surface seems to be less responsive to such reducing and oxidizing conditions. Pronounced changes of the electrical conductivity upon changing from reducing to oxidizing conditions at elevated temperatures were monitored by electrochemical impedance spectroscopy (EIS). The lowering of the potential barrier for the charge transport particularly at lower temperatures already at reducing conditions is confirmed. The impedance response indicates that charge transfer is governed predominantly by one single process, i.e. by interaction of surface-like states localized within depletion layer with gas molecules. This implies that the free charge carriers in the material are determined by the intrinsic property like non-stoichiometry. Gas sensors made from such FSS nanoparticulate metal oxides showed well developed sensing characteristics of the hydrogen sensing at moderate temperatures.

Role of preferential weak hybridization between the surface-state of a metal and the oxygen atom in the chemical adsorption mechanism.

We report on the chemical adsorption mechanism of atomic oxygen on the Pt(111) surface using angle-resolved-photoemission spectroscopy (ARPES) and density functional calculations. The detailed band structure of Pt(111) from ARPES reveals that most of the bands near the Fermi level are surface-states. By comparing band maps of Pt and O/Pt, we identify that dxz (dyz) and dz(2) orbitals are strongly correlated in the surface-states around the symmetry point M and K, respectively. Additionally, we demonstrate that the s- or p-orbital of oxygen atoms hybridizes preferentially with the dxz (dyz) orbital near the M symmetry point. This weak hybridization occurs with minimal charge transfer.

Revealing CO2 dissociation pathways at vicinal copper (997) interfaces.

Size- and shape-tailored copper (Cu) nanocrystals can offer vicinal planes for facile carbon dioxide (CO2) activation. Despite extensive reactivity benchmarks, a correlation between CO2 conversion and morphology structure has not yet been established at vicinal Cu interfaces. Herein, ambient pressure scanning tunneling microscopy reveals step-broken Cu nanocluster evolutions on the Cu(997) surface under 1 mbar CO2(g). The CO2 dissociation reaction produces carbon monoxide (CO) adsorbate and atomic oxygen (O) at Cu step-edges, inducing complicated restructuring of the Cu atoms to compensate for increased surface chemical potential energy at ambient pressure. The CO molecules bound at under-coordinated Cu atoms contribute to the reversible Cu clustering with the pressure gap effect, whereas the dissociated oxygen leads to irreversible Cu faceting geometries. Synchrotron-based ambient pressure X-ray photoelectron spectroscopy identifies the chemical binding energy changes in CO-Cu complexes, which proves the characterized real-space evidence for the step-broken Cu nanoclusters under CO(g) environments. Our in situ surface observations provide a more realistic insight into Cu nanocatalyst designs for efficient CO2 conversion to renewable energy sources during C1 chemical reactions.

Design of a Metal/Oxide/Carbon Interface for Highly Active and Selective Electrocatalysis.

Sustainable energy-conversion and chemical-production require catalysts with high activity, durability, and product-selectivity. Metal/oxide hybrid structure has been intensively investigated to achieve promising catalytic performance, especially in neutral or alkaline electrocatalysis where water dissociation is promoted near the oxide surface for (de)protonation of intermediates. Although catalytic promise of the hybrid structure is demonstrated, it is still challenging to precisely modulate metal/oxide interfacial interactions on the nanoscale. Herein, we report an effective strategy to construct rich metal/oxide nano-interfaces on conductive carbon supports in a surfactant-free and self-terminated way. When compared to the physically mixed Pd/CeO2 system, a much higher degree of interface formation was identified with largely improved hydrogen oxidation reaction (HOR) kinetics. The benefits of the rich metal-CeO2 interface were further generalized to Pd alloys for optimized adsorption energy, where the Pd3Ni/CeO2/C catalyst shows superior performance with HOR selectivity against CO poisoning and shows long-term stability. We believe this work highlights the importance of controlling the interfacial junctions of the electrocatalyst in simultaneously achieving enhanced activity, selectivity, and stability.

The study of oxygen molecules on Pt (111) surface with high resolution x-ray photoemission spectroscopy.

By using high resolution x-ray photoelectron spectroscopy, we show that inelastic scattering of photoelectron at low temperature (30-50 K) generates two kinds of oxygen species on Pt (111) surface. Intense synchrotron radiation source dissociates oxygen molecules into chemisorbed atomic oxygen and induces the formation of PtO on the surface. Estimated coverage of dissociated atomic oxygen is 0.5 ML, suggesting possible formation of p(2 x 1) surface structure, while PtO coverage shows saturation coverage of 0.5 ML. Molecular oxygen dosed at 30 K undergoes thermally activated transition from physisorbed to chemisorbed state at around 40 K.

How Rh surface breaks CO2 molecules under ambient pressure.

Utilization of carbon dioxide (CO2) molecules leads to increased interest in the sustainable synthesis of methane (CH4) or methanol (CH3OH). The representative reaction intermediate consisting of a carbonyl or formate group determines yields of the fuel source during catalytic reactions. However, their selective initial surface reaction processes have been assumed without a fundamental understanding at the molecular level. Here, we report direct observations of spontaneous CO2 dissociation over the model rhodium (Rh) catalyst at 0.1 mbar CO2. The linear geometry of CO2 gas molecules turns into a chemically active bent-structure at the interface, which allows non-uniform charge transfers between chemisorbed CO2 and surface Rh atoms. By combining scanning tunneling microscopy, X-ray photoelectron spectroscopy at near-ambient pressure, and computational calculations, we reveal strong evidence for chemical bond cleavage of O‒CO* with ordered intermediates structure formation of (2 × 2)-CO on an atomically flat Rh(111) surface at room temperature.

Covalent-bonding-induced strong phonon scattering in the atomically thin WSe2 layer.

In nano-device applications using two-dimensional (2D) van der Waals materials, a heat dissipation through nano-scale interfaces can be a critical issue for optimizing device performances. By using a time-domain thermoreflectance measurement technique, we examine a cross-plane thermal transport through mono-layered (n = 1) and bi-layered (n = 2) WSe2 flakes which are sandwiched by top metal layers of Al, Au, and Ti and the bottom Al2O3 substrate. In these nanoscale structures with hetero- and homo-junctions, we observe that the thermal boundary resistance (TBR) is significantly enhanced as the number of WSe2 layers increases. In particular, as the metal is changed from Al, to Au, and to Ti, we find an interesting trend of TBR depending on the WSe2 thickness; when referenced to TBR for a system without WSe2, TBR for n = 1 decreases, but that for n = 2 increases. This result clearly demonstrates that the stronger bonding for Ti leads to a better thermal conduction between the metal and the WSe2 layer, but in return gives rise to a large mismatch in the phonon density of states between the first and second WSe2 layers so that the WSe2-WSe2 interface becomes a major thermal resistance for n = 2. By using photoemission spectroscopy and optical second harmonic generation technique, we confirm that the metallization induces a change in the valence state of W-ions, and also recovers a non-centrosymmetry for the bi-layered WSe2.

Adsorbate-driven reactive interfacial Pt-NiO1-x nanostructure formation on the Pt3Ni(111) alloy surface.

The origin of the synergistic catalytic effect between metal catalysts and reducible oxides has been debated for decades. Clarification of this effect, namely, the strong metal-support interaction (SMSI), requires an understanding of the geometric and electronic structures of metal-metal oxide interfaces under operando conditions. We show that the inherent lattice mismatch of bimetallic materials selectively creates surface segregation of subsurface metal atoms. Interfacial metal-metal oxide nanostructures are then formed under chemical reaction environments at ambient pressure, which thus increases the catalytic activity for the CO oxidation reaction. Our in situ surface characterizations using ambient-pressure scanning tunneling microscopy and ambient-pressure x-ray photoelectron spectroscopy exhibit (i) a Pt-skin layer on the Pt-Ni alloyed surface under ultrahigh vacuum, (ii) selective Ni segregation followed by the formation of NiO1-x clusters under oxygen gas, and (iii) the coexistence of NiO1-x clusters on the Pt-skin during the CO oxidation reaction. The formation of interfacial Pt-NiO1-x nanostructures is responsible for a highly efficient step in the CO oxidation reaction. Density functional theory calculations of the Pt3Ni(111) surface demonstrate that a CO molecule adsorbed on an exposed Pt atom with an interfacial oxygen from a segregated NiO1-x cluster has a low surface energy barrier of 0.37 eV, compared with 0.86 eV for the Pt(111) surface.

Catalytic CO oxidation over Pd70Au30(111) alloy surfaces: spectroscopic evidence for Pd ensemble dependent activity.

Catalytic CO oxidation over Pd(111) and Pd70Au30(111) surfaces was investigated by in situ spectroscopic observations to understand the alloying effect. The reaction behaviour on Pd70Au30(111) is greatly different from that on Pd(111). Pd monomer and dimer ensembles can act as active centers, whereas triangular-shaped trimers and larger ensembles are inactive.

Chemical states of surface oxygen during CO oxidation on Pt(1 1 0) surface revealed by ambient pressure XPS.

The study of CO oxidation on Pt(1 1 0) surface is revisited using ambient pressure x-ray photoemission spectroscopy. When the surface temperature reaches the activation temperature for CO oxidation under elevated pressure conditions, both the α-phase of PtO2 oxide and chemisorbed oxygen are formed simultaneously on the surface. Due to the exothermic nature of CO oxidation, the temperature of the Pt surface increases as CO oxidation takes place. As the CO/O2 ratio increases, the production of CO2 increases continuously and the surface temperature also increases. Interestingly, within the diffusion limited regions, the amount of surface oxide changes little while the chemisorbed oxygen is reduced.