Validity and reliability of the Spanish version of the consultation and relational empathy measure in dental students (Sp-Dent-CARE): A cross-sectional study.

INTRODUCTION: An evaluation was made of the psychometric properties of a Spanish version of the Consultation and Relational Empathy Measure (CARE) to assess relational empathy in undergraduate dental students. In addition, the influence of demographic, socio-economic and consultation-related factors upon the degree of perceived empathy and overall satisfaction was studied. MATERIALS AND METHODS: A cross-sectional study was carried out in patients seen in the Oral Surgery Unit by fourth year dental students. Dentists, specialized translators and psychologists developed the translation of the questionnaire. After a pilot test, a convenience sample of patients was included. Construct validity was tested by factor analysis using principal component analysis with varimax rotation and Kaiser standardization, and internal consistency was assessed by Cronbach's α. RESULTS: Two pilot tests were carried out with a panel of experts until the final version of the questionnaire was established. In the validation stage, 191 patients participated (92 men and 99 women), with a mean age of 52.5 ± 17 years. The mean score of the CARE measure was 47.2 ± 4.4, and 57.6% of the patients (n = 110) reported the maximum score on the questionnaire. The final version showed a 1-factor solution explaining 68.6% of the total variance, with excellent final internal consistency (α = 93.4%). CONCLUSION: The Spanish version of the CARE measure affords high reliability and validity in assessing relational empathy in dental students. Perceived empathy is related to overall satisfaction. Patient demographics and the number of visits do not influence perceived empathy.

Influence of incision on periodontal parameters after apical surgery: a meta-analysis.

INTRODUCTION: The aim of the present meta-analysis was to determine the effect of the different incision designs used in apical surgery on periodontal parameters. METHODS: An electronic search in Cochrane Library, Pubmed (MEDLINE), and Scopus was conducted on April 2020. Two independent investigators included clinical trials and prospective cohort studies comparing the influence of different incision designs used in apical surgery on gingival recession, periodontal probing depth, and clinical attachment level. A pairwise and network meta-analysis was performed in order to meta-analyze the direct and the indirect comparisons among the incision designs. RESULTS: Six articles were included for the qualitative and the quantitative syntheses, involving a total of 401 teeth (372 patients). The pairwise meta-analysis did not reveal statistically significant differences between the incision designs in any of the outcomes evaluated. However, to reduce the amount of buccal gingival recession, the papilla base incision presented the highest probabilities of being ranked the most effective incision (85.7%), followed by submarginal incision (50.0%) and intrasulcular incision (14.3%). CONCLUSION: Regardless of the incision design used, the periodontal parameters did not statistically differ after apical surgery. CLINICAL RELEVANCE: Periodontal parameters did not significantly change despite the incision used in apical surgery. However, based on the results of the present review, the papilla base incision seems to be the best option to reduce the amount of buccal gingival recession.

Mechanical complications of implant-supported complete-arch restorations and impact on patient quality of life: A retrospective cohort study.

STATEMENT OF PROBLEM: Mechanical complications (for example, fractures) in implant-supported complete-arch restorations may affect the social and professional activities of the patient. However, most studies seem to overlook patient perceptions and generally do not assess the changes in the quality of life (QoL) of patients who experience these complications. PURPOSE: The purpose of this retrospective cohort study was to assess the influence of technical or mechanical complications of complete-arch implant-supported prostheses on patient perception and QoL by using the Oral Health Impact Profile (OHIP)-14. MATERIAL AND METHODS: A retrospective cohort study was formed of patients treated consecutively at a private clinic with immediately loaded complete-arch prostheses supported by a minimum of 4 implants (Replace Tapered; Nobel Biocare AB) and Multi-Unit conical abutments (Multi-Unit abutments; Nobel Biocare AB). OHIP-14 and questions regarding self-reported satisfaction were used to evaluate the influence of mechanical complications on QoL. RESULTS: Fifty-six participants (26 men and 30 women) with a mean age of 64 ±11.1 years, and 72 restored arches were included. The mean ±standard deviation follow-up time was 52 ±26 months. The prosthetic success rate was 38.8%, and the survival rate was 100% (no failure was registered). The most common complications were abutment screw loosening (43%), chipping or fracture of the veneering material (25%), and screw loosening (21%). The OHIP-14 scores were close to zero, without differences between participants with or without mechanical complications. Overall, the participants reported that the prostheses allowed good oral hygiene (94.6%) and met their expectations (89%) and that they would repeat the treatment (87.5%) and would recommend it to others (93%). CONCLUSIONS: Minor mechanical complications such as screw loosening and chipping or fracture of the veneering material were frequent events but had no impact on the satisfaction and QoL of patients with immediately loaded complete-arch implant-supported prostheses.

Effect of an Informative Video on Anxiety and Hemodynamic Parameters in Patients Requiring Mandibular Third Molar Extraction: A Randomized Clinical Trial.

PURPOSE: The purpose was to determine the effect of watching an informative video about mandibular third molar (M3M) removal on patient anxiety and hemodynamic parameters. PATIENTS AND METHODS: A randomized controlled clinical trial was carried out in healthy patients (aged between 18 and 40 years) requiring M3M extraction under local anesthesia. Patients with previous tooth extractions, psychiatric disorders, or cardiac problems or patients undergoing anxiolytic or antidepressant drug treatment were excluded. Participants were randomized into 2 groups according to whether they watched an informative video about the surgical procedure (video group) or not (control group). The primary outcome variable was the difference between groups regarding patient anxiety assessed with the State-Trait Anxiety Inventory (STAI) and the Modified Dental Anxiety Scale (MDAS). The secondary outcome variables were hemodynamic parameters recorded during different moments of the surgical procedure. Descriptive, bivariate, and multivariate analyses were performed, and a repeated-measures mixed model was generated. Statistical significance was considered for P < .05. RESULTS: Fifty patients referred for M3M extraction met the inclusion criteria. The final data analysis was based on 47 patients: 25 from the video group and 22 controls. The bivariate analysis showed the video group to have a significant decrease in anxiety as measured by the MDAS (P = .006; 95% confidence interval [CI], -4.1 to -0.7) and STAI-State (P = .003; 95% CI, -13.7 to -0.7). A significantly lower heart rate was likewise found in the video group (χ2 = 4.30, df = 1, P = .038). The linear regression analysis adjusting for the STAI-Trait also showed lower dental anxiety measured by the MDAS in the video group (P = .023; 95% CI, 0.32 to 4.14). CONCLUSIONS: Providing preoperative information through an informative video about M3M removal significantly reduces patient anxiety and heart rate during the surgical procedure.

Torsion Resistance of the Ball Head System Screw and Screwdriver for Angled Screw Channels on Implant Prosthetics.

The primary objective of this study was to determine the torsion resistance of the Ball Head System (BHS) screw and screwdriver set at 0°, 20°, and 30° angulations. The secondary objective was to compare the BHS set with the 1.3-mm hexagonal screwdriver system (HexS) at 20° and analyze the condition of the BHS after 10 and 30 iterations with 30 N·cm torque at 30° angulation. A workbench made from type 4 plaster with 6 steel implant replicas (external hexagon, 4.1 mm) inserted at 0°, 20°, and 30° angulation was designed. An analogical torque meter was used. The deformations produced on the whole set were examined by field emission scanning electron microscopy. A descriptive analysis was performed. The maximum torque performance for BHS at 30° angulation was 54 ± 12 N·cm. Most screws could be removed despite the deformations produced. At 20° angulation, the BHS set achieved an average torque resistance of 67 ± 12 N·cm, whereas the HexS failed at 45 ± 2 N·cm. Although the iterations performed at 30 N·cm torque and 20° angulation produced some deformations on BHS sets; these could be tightened and unscrewed. The BHS allows tightening at a torque of up to 54 N·cm. Under the same conditions, BHS showed more torque resistance than HexS. Deformation of BHS sets was directly related to the number of iterations.

Does Mandibular Gonial Angle Predict Difficulty of Mandibular Third Molar Removal?

PURPOSE: Predicting the difficulty of impacted mandibular third molar (IM3M) removal remains a controversial issue because many variables have been associated with increased operation time. Thus, the main objective of this study was to assess the influence of the gonial angle on the surgical difficulty of IM3M extraction. PATIENTS AND METHODS: A prospective cohort study of patients requiring IM3M removal was conducted. The gonial angle measured with a goniometer was considered the primary predictor variable. The primary outcome variable was operation time. Difficulty also was recorded by surgeons using a 100-mm visual analog scale (VAS). Postoperative complications (pain, swelling, and trismus at 48 hours and 7 days) were registered as secondary outcome variables. A descriptive bivariate statistical analysis, Pearson correlations and scatter plots, and an explanatory multiple linear regression model were performed. Significance was set at P < .05. RESULTS: The sample comprised 60 participants (17 men and 43 women) with a mean age of 25.2 years (standard deviation, 7.1 years). No significant correlations were found between the gonial angle and operation time, VAS difficulty score, and postoperative complications. Regression analysis confirmed this lack of effect of the gonial angle. The operation time was significantly affected by surgical experience (P = .016) and patient age (P = .009), whereas the 100-mm VAS difficulty score was only related to surgical experience (P = .001). CONCLUSIONS: The gonial angle is not related to the surgical difficulty of IM3M removal. Moreover, this variable is not associated with the occurrence of postoperative complications. According to the findings in this cohort, surgical experience and patient age are the only variables significantly related to increased operation time.

Effect of implantoplasty on fracture resistance and surface roughness of standard diameter dental implants.

OBJECTIVE: To assess the effect of implantoplasty on the fracture resistance, surface roughness, and macroscopic morphology of standard diameter (4.1 mm) external connection dental implants. MATERIALS AND METHODS: An in vitro study was conducted in 20 screw-shaped titanium dental implants with an external connection. In 10 implants, the threads and surface were removed and polished with high-speed burs (implantoplasty), while the remaining 10 implants were used as controls. The final implant dimensions were recorded. The newly polished surface quality was assessed by scanning electron microscopy (SEM) and by 3D surface roughness analysis using a confocal laser microscope. Finally, all the implants were subjected to a mechanical pressure resistance test. A descriptive analysis of the data was made. Also, Student's t tests were employed to detect differences regarding the compression tests. RESULTS: Implantoplasty was carried out for a mean time of 10 min and 48 s (standard deviation (SD) of 1 min 22 s). Macroscopically, the resulting surface had a smooth appearance, although small titanium shavings and silicon debris were present. The final surface roughness (Sa values 0.1 ± 0.02 µm) was significantly lower than that of the original (0.75 ± 0.08 µm Sa ) (p = .005). There was minimal reduction in the implant's inner body diameter (0.19 ± 0.03 mm), and no statistically significant differences were found between the test and control implants regarding the maximum resistance force (896 vs 880 N, respectively). CONCLUSIONS: Implantoplasty, although technically demanding and time-consuming, does not seem to significantly alter fracture resistance of standard diameter external connection implants. A smooth surface with Sa values below 0.1 µm can be obtained through the use of silicon polishers. A larger sample is required to confirm that implantoplasty does not significantly affect the maximum resistance force of standard diameter external connection implants.

Novel Ball Head Screw and Screwdriver Design for Implant-Supported Prostheses With Angled Channels: A Finite Element Analysis.

The primary objective of this study was to design the optimal geometry of a novel screwdriver, create the grooves on a ball head screw, and demonstrate its resistance to a torque of up to 40 Ncm at angulations of 0°, 15°, and 30° by using nonlinear finite element analysis. A secondary objective was to create a foolproof, easily recognizable system. The grooved ball head screw and geometry of the screwdriver, functioning from an angulation of 0° to 30°, was generated using Pro-ENGINEER Wildfire 5.0 software. Static structural analyses among bodies in contact were performed at different angles of 0°, 15°, and 30° at a torque of 20 Ncm and 40 Ncm using nonlinear finite element simulation by means of ANSYS 12.0. The maximum stress supported by the ball head screw and screwdriver was similar at 20 Ncm and 40 Ncm. Although greater deformations were found at 40 Ncm, these were small and might not affect the performance of the system. Further, the rupture torque value for the M2 connection was 55 Ncm for 0° and 30°, and 47.5 Ncm for 15°. Numerical simulation showed that the ball head system design can achieve the mechanical strength requirements expected for screws used in implant-supported restorations at an angulation of up to 30°. Finite element analysis showed this novel ball head screw and screwdriver system to be a good solution for angled screw channels in implant-supported prostheses.

Prognostic factors on periapical surgery: A systematic review.

BACKGROUND: Analyze the most important prognostic factors when performing periapical surgery and compare the success rates of distinct authors. INTRODUCTION: Periapical surgery is an approach to treat non-healing periapical lesions and it should be viewed as an extension of endodontic treatment and not as a separate entity. MATERIAL AND METHODS: A search of articles published in Cochrane, PubMed (MEDLINE) and Scopus was conducted with the key words "prognostic factors", "prognosis", "periapical surgery", "endodontic surgery" and "surgical endodontic treatment". The inclusion criteria were articles including at least 10 patients, published in English, for the last 10 years. The exclusion criteria were nonhuman studies and case reports. RESULTS: 33 articles were selected from 321 initially found. Ten articles from 33 were excluded and finally the systematic review included 23 articles: 1 metaanalysis, 1 systematic review, 2 randomized clinical trials, 6 reviews, 12 prospective studies and 1 retrospective study. They were stratified according to their level of scientific evidence using the SORT criteria. CONCLUSIONS: Factors associated with a better outcome of periapical surgery are patients ≤45 years old, upper anterior or premolar teeth, ≤10 sized lesions, non cystic lesions, absence of preoperative signs and symptoms, lesions without periodontal involvement, teeth with an adequate root-filling length, MTA as root-end filling material, uniradicular teeth, absence of perforating lesions, apical resection < 3 mm, teeth not associated to an oroantral fistula and teeth with only one periapical surgery.

Effect of the suture technique on postoperative pain, swelling and trismus after removal of lower third molars: A randomized clinical trial.

BACKGROUND: To evaluate the intensity of pain, swelling and trismus after the removal of impacted lower third molars comparing two different suture techniques of the triangular flap: the complete suture of the distal incision and relieving incision and the partial suture with only one suture knot for closure of the corner of the flap and the closure of the distal incision, without suturing the relieving incision. MATERIAL AND METHODS: A prospective, randomized, cross-over clinical trial was conducted in 40 patients aged from 18 to 45 years who underwent surgical extraction of impacted lower third molars at the Department of Oral Surgery in the Odontological Hospital of the University of Barcelona during the year 2011. Patients were randomly divided in 2 groups. Two different techniques (hermetical closure and partial closure of the wound) were performed separated by a one month washout period in each patient. Postoperative pain, swelling and trismus were evaluated prior to the surgical procedure and also at 2 and 7 days postoperatively. RESULTS: No statistically significant differences were observed for pain (p<0.06), trismus (p<0.71) and swelling (p<0.05) between the test and the control group. However, the values of the three parameters related to the test group were lower than those for the control group. CONCLUSIONS: Partial closure of the flap without suturing the relieving incision after surgical extraction of lower third molars reduces operating time and it does not produce any postoperative complications compared with complete closure of the wound.

Clinical significance of interleukin-1 genotype in smoking patients as a predictor of peri-implantitis: A case-control study.

BACKGROUND: Interleukin-1 (IL-1) is a proinflammatory cytokine that plays an important role in the pathogenesis of periodontitis, and so it might be useful to detect high-risk cases of peri-implantitis. It has been reported that IL-1 polymorphisms and smoking habit have a synergic effect, increasing the incidence of peri-implantitis. The aim of the present study was to evaluate the relationship between IL-1 gene polymorphisms and peri-implantitis in smoking patients. MATERIAL AND METHODS: A case-control study was performed in 27 patients with peri-implantitis and 27 patients with healthy implants. All patients included were smokers. IL-1A-C889T, IL-1B+C3953T and IL-1RN+T2018C were identified by polymerase chain reaction (PCR) amplification in order to establish a relation between these variables and the presence of peri-implantitis. A bivariate analysis was performed and odds-ratio (OR) were calculated. RESULTS: The incidence of peri-implantitis was significantly higher in patients with previous history of periodontitis (p=0.024; OR=10.9). Both groups were similar regarding IL-1A-C889T, IL-1B+C3953T and IL-1RN+T2018C genotypes. No increased risk in heavy smokers with IL-1 polymorphism was found. CONCLUSIONS: IL-1 genotypes do not seem to be good predictors of peri-implantitis in the great majority of smoking patients. Furthermore, no synergic effect was found between IL-1 genotypes and heavy smokers. Patients with a previous history of periodontitis were more prone to peri-implantitis.

Materials and prognostic factors of bone regeneration in periapical surgery: a systematic review.

OBJECTIVES: Analyse the effectiveness of different materials and techniques used in guided tissue regeneration (GTR) applied in periapical surgery, comparing the success rate obtained in 4-wall defects and in through-and-through bone lesions as well as to establish prognostic factors. MATERIAL AND METHODS: A Cochrane, PubMed-MEDLINE and Scopus database search (October 2012 to March 2013) was conducted with the search terms "periapical surgery", "surgical endodontic treatment", "guided tissue regeneration", "bone regeneration", "bone grafts", "barrier membranes" and "periapical lesions" individually and next, using the Boolean operator "AND". The inclusion criteria were the use of GTR (bone graft and/or membrane barrier), clinical studies including at least 10 patients, 10 years aged articles published in English or French. The exclusion criteria were case reports and nonhuman studies. RESULTS: 34 publications were selected from a total of 483. 9 of the 34 were excluded. Finally, the systematic review included 25 articles: 2 metaanalysis, 8 reviews, 13 prospective studies and 2 retrospective studies. They were stratified according to their level of scientific evidence using the SORT criteria. The 4-wall periapical and through-and-through lesions improve more their prognosis by combining bone grafts and barrier membranes than using these materials exclusively, respect to the control groups. The results show lower failure rates in 4-wall lesions than in through-and-through lesions using GTR. CONCLUSIONS: The combined GTR technique (filling material and membranes) obtains a greater success rate both in 4-wall lesions and in through-and-through lesions, respect to the control groups. The use of regeneration materials seems to be more necessary in through-and-through lesions, > 5mm lesions, lower teeth and apicomarginal lesions as they have the worst healing prognosis. In function of the articles scientific quality, a type B recommendation is given in favour to the use of GTR in association of periapical surgery in case of 4-wall and through-and-through lesions.

Do Consumers Value Agri-Food Industries' Environmental Commitment? The Case of the Table Olive Industry.

An increasing number of food companies are voluntarily adopting environmental policies and sustainability initiatives to tackle climate change. The aims of this study were to analyse the presence of environmental labels on table olive products, to explore consumer perceptions of these companies' environmental commitment and initiatives, and to evaluate the influence of these messages on purchasing decisions. For this purpose, a market study was conducted in different hypermarkets and supermarkets in Spain, and an online survey was submitted to consumers (n = 227). The results show that environmental claims and/or certifications related to sustainability do not appear on table olive products, despite most of the companies that produce and/or market table olives having adopted environmental and sustainability policies and commitments (34.3% have their environmental policy published on their website). More than 85% of consumers positively value these companies' sustainability commitments and consider environmental initiatives to be very important. As a sector of consumers pays close attention to environmental commitments, it would be interesting for table olive companies to identify their sustainability policies on their products' labelling to, thus, facilitate pro-environmental consumer purchase choices. These results could help the food industry develop the best strategies to publicise their social and environmental policies and commitments.

Customized Subperiosteal Implants for the Rehabilitation of Atrophic Jaws: A Consensus Report and Literature Review.

(1) Background: The aim was to perform a literature review on customized subperiosteal implants (CSIs) and provide clinical guidelines based on the results of an expert consensus meeting held in 2023. (2) Methods: A literature search was performed in Pubmed (MEDLINE) in July 2023, including case series and cohort studies with a minimum follow-up of 6 months that analyzed totally or partially edentulous patients treated with CSIs. Previously, an expert consensus meeting had been held in May 2023 to establish the most relevant clinical guidelines. (3) Results: Six papers (four case series and two retrospective cohort studies) were finally included in the review. Biological and mechanical complication rates ranged from 5.7% to 43.8% and from 6.3% to 20%, respectively. Thorough digital planning to ensure the passive fit of the CSI is mandatory to avoid implant failure. (4) Conclusions: CSIs are a promising treatment option for rehabilitating edentulous patients with atrophic jaws; they seem to have an excellent short-term survival rate, a low incidence of major complications, and less morbidity in comparison with complex bone grafting procedures. As the available data on the use of CSIs are very scarce, it is not possible to establish clinical recommendations based on scientific evidence.

Color doppler ultrasound for the assessment of palatal fibromucosa thickness and the trajectory of the greater palatine artery: A pilot study.

Background: The primary objective of this study was to determine the position and course of the greater palatine artery using color doppler ultrasound. The secondary objective was to determine the thickness of the palatine fibromucosa. Material and Methods: A pilot case series study was performed in a private clinic during February 2020. The scans were performed with a Mindray® M9 ultrasound machine (Mindray North America, NJ, USA) coupled to an L16-4Hs® hockey-type angled probe. For each participant, the arterial path and thickness of the palatal fibromucosa were determined at 5 different points. Results: A total of 6 volunteers (3 males and 3 females) with a mean age of 39.2 (±16) years were included. While the thickness of the fibromucosa decreased along the anterior area, the distance from the cementoenamel junction to the position of the artery was generally maintained up to the canine position, where it was found to be closed to teeth. Conclusions: Color doppler ultrasound allows accurate localization of the artery as well as measurement of the thickness of the palatine fibromucosa. It would help to select the best area for graft harvesting in order to avoid bleeding complications due to vascular sectioning. Key words:Hard palate, doppler ultrasonography, diagnosis, connective tissue graft.

Patient perception about the need for antibiotics after tooth extractions: A cross-sectional study.

BACKGROUND: Although the current scientific literature does not support the routine use of antibiotics after dental extractions, patients believe that these drugs offer clear benefit during the postoperative period. The main objective of this study was to describe patient perception of the need for antibiotics after routine tooth extraction and to assess knowledge about the benefits and adverse effects of antibiotic therapy. MATERIAL AND METHODS: A cross-sectional study was carried out. A total of 452 participants requiring tooth extraction and seen in the Dental Clinic of the University of Barcelona (Barcelona, Spain) were given a specific questionnaire on the need for antibiotics after dental treatments or diseases, and on their benefits and adverse effects. Descriptive bivariate and multivariate (logistic regression model) analyses were performed. RESULTS: Of the 452 participants, 185 (40.9%) were men and 267 (59.1%) were women, with a mean age of 35.2 ± 15.9 years. Most of the patients (76.6%) expected to take antibiotics after tooth extraction. A higher level of education, older age and knowledge about bacterial resistances were inversely correlated to the perceived need for antibiotic treatment (p<0.05). According to the respondents, the main advantage of antibiotics was the reduction of infection rates, while the most frequently mentioned adverse events were allergic reactions, diarrhea and nausea or vomiting. CONCLUSIONS: Most patients think that antibiotics are necessary after routine dental extraction to prevent postoperative infection. Younger patients with a low educational level and who are unaware of the problem posed by bacterial resistances seem to be more supportive of antibiotic prophylaxis. Most respondents are familiar with the main benefits and adverse effects of these drugs. Key words:Antibiotic, microbial drug resistance, tooth extraction, oral surgery, survey, postoperative wound infection.

Simple bone cyst: A case report.

BACKGROUND: Simple bone cysts (SBC) are intraosseous cysts devoid of an epithelial lining, asymptomatic and appearing in the jaw. In general, SBCs are discovered incidentally and tooth displacement or pathological fractures are very unusual. MATERIAL AND METHODS: This study reports a 16 years old man that presented an asymtomatic radiolucent unilocular lesion in the right ascending ramus. Differencial diagnosis included odontogenic keratocyst and dentigerous cyst. One surgical intervention was performed and consisted in the curettage of the bone walls. The lesion and some small samples of the bone wall were sent for the anatomopathological study. RESULTS: The anatomopathological exam confirmed the diagnosis of simple bone cyst. There was no evidence of recurrence after 6 months of follow-up and bone regeneration was almost complete. CONCLUSIONS: Curettage is the technique of choice for SBC treatment. Control visits are necessary to check the absence of postoperative complications and bone regeneration. Key words:Simple bone cyst, traumatic bone cyst, intraosseous cyst, curettage.

Retrospective Cohort Study on the Influence of Bone Remodeling on Marginal Bone Loss and Peri-implantitis Around Immediately Loaded Implants Supporting Complete-Arch Restorations.

PURPOSE: The main objective of this study was to assess the influence of bone remodeling on late marginal bone loss in immediately loaded, implant-supported, complete-arch restorations and, secondarily, to determine its relationship to peri-implant disease occurrence using a multilevel analysis. MATERIALS AND METHODS: A retrospective cohort study of patients treated consecutively in a private clinic with immediately loaded full-arch restorations with at least 12 months of follow-up was conducted. Bone remodeling and marginal bone loss were determined through measurements made on panoramic radiographs by two calibrated examiners. Peri-implant health status was diagnosed in a visit for peri-implant maintenance. Descriptive, bivariate, and multilevel analyses were performed with Stata/IC 15.1 software (StataCorp). RESULTS: A total of 30 patients (11 men and 19 women, mean age: 63.3 ± 10.4 years), with a mean follow-up of 37.7 ± 19.6 months were included. Forty arches (20 maxillary and 20 mandibular) received 207 implants. Bone remodeling had an inversely proportional effect on marginal bone loss (P =.005) but was not related to peri-implantitis (P =.103; hazard rate [HR] = 2.1). CONCLUSION: Taking into account the limitations of this study, bone remodeling around immediately loaded dental implants supporting complete-arch restorations does not appear to increase marginal bone loss or peri-implantitis.

Peripheral giant cell granuloma associated with a dental implant: A case report.

Peripheral giant cell granuloma (PGCG) is a reactive exophytic lesion classified as a benign tumor of the oral mucosa. Although its etiology is not clear, it may be a consequence of local chronic irritation or persistent trauma. The objective of this case report was to document the main clinical and histopathological characteristics of a patient with a PGCG associated with a dental implant. A 36 years-old man presented a partly-ulcerated violet-colored sessile-based tumor in the buccal aspect of an implant placed in the fourth quadrant. Radiographically, the implant had one third of marginal bone loss. Differential diagnosis included PGCG and pyogenic granuloma. The implant and the lesion were removed and the histopathological diagnosis was PGCG. After 6 months, there was no evidence of relapse. Peripheral giant cell granulomas may appear in implants that have suffered bone loss. When facing with peri-implant soft tissue lesions, it is advisable to perform an anatomopathological study to obtain a correct diagnosis, to establish an adequate treatment plan, and to rule out malignant lesions. Key words:Peri-implant bone loss, peripheral giant cell granuloma, benign tumor.

Indications of the extraction of symptomatic impacted third molars. A systematic review.

BACKGROUND: A literature review was made to determine when third molar (3M) extraction is recommended in symptomatic patients and when it is not recommended. MATERIAL AND METHODS: A Medline (PubMed) and EMBASE search was made for articles related to indications for the extraction of 3Ms, published in the last 10 years and up until September 2018. RESULTS: The electronic search yielded 175 articles. After eliminating duplicates, a total of 173 articles were subjected to review of the title and abstract. Only 19 studies were finally included in the systematic review. There was a well documented increase in morbidity associated to impacted 3Ms (non-restorable caries, fracture, infection, periodontal disease, repeated pericoronitis, cysts and tumors), and in the presence of disease, extraction was considered to be indicated. The extraction of 3Ms with signs and/or symptoms of periodontal disease improved periodontal health at the distal surface of the second molar. Postoperative quality of life of patients with symptomatic 3Ms and with disease improved after surgical extraction. CONCLUSIONS: Extraction is indicated in the presence of disease associated to an impacted 3M, whether symptomatic or not. In contrast, extraction is not indicated in the absence of infection or other associated disease conditions. Key words:Third molar, periodontal disease, periodontitis, pericoronitis, dental caries, occlusal caries, mandibular cysts, osteomyelitis, odontogenic tumor.