RESUMO
Silicides with potential to form a protective silica layer have garnered considerable attention as engineering ceramic materials. This research investigates the influence of initial composition and mechanical activation on the synthesis performance and microstructure of products in the Ti-Si-Mo system. Several compositions, including Ti8Mo29Si63, Ti15Mo25Si60, Ti22Mo22Si56, Ti40Mo12Si48, Ti52Mo6Si42, Ti62.5Si37.5, and Mo33Si67, were prepared and synthesized via mechanically activated self-propagating high-temperature synthesis (MASHS). XRD, SEM, and EDS analyses, along with related investigations such as grain size calculations and morphology studies, were performed. The results indicate that at low Ti concentrations, the composite contains (Ti0.8,Mo0.2)Si2 and MoSi2, whereas moderate Ti concentrations enable the formation of the MoSi2-Ti5Si3 composite. Moreover, a high amount of Mo can extensively dissolve into the titanium and titanium silicide structure, resulting in the synthesis of the (Ti,Mo)5Si3 phase in Ti-rich samples. The dissolution of Mo in the crystal structure of the compound decreases the lattice parameters of titanium silicide. Furthermore, mechanical activation facilitates the initiation of reactions in compositions with lower Ti content and yielding fine-grained products.
RESUMO
Mechanical properties and sintering behavior of additive-free and TiN-doped ZrB2 ceramics were studied. Reactive spark plasma sintering method was applied for manufacturing of ceramics at 1850 °C for 6 min under 40 MPa. The impact of TiN addition on the microstructure evaluation, densification, and mechanical feathers was investigated. A porous monolithic ZrB2 with a relative density of 76.5 % was manufactured, while the introduction of 5 wt% TiN resulted in enhancement of relative density to 93.1 %. The formation of (Zr,Ti)B2 solid solution and in-situ h-BN and ZrN phases was proven by microstructural assessments and X-ray diffractometry. Minimizing the grain growth and improving the densification, as the results of TiN addition, led to enhancement in mechanical properties. The values of bending strength, fracture toughness, and Vickers hardness boosted from 187.6 MPa, 1.9 MPa.m½, and 10.1 GPa for additive-free ZrB2 to 606.5 MPa, 4.5 MPa.m½, and 18.8 GPa for (Zr,Ti)B2-ZrN-BN composite.
RESUMO
This review article aims to provide an overview of the recent advances in the voltammetric and amperometric sensing of cysteine (Cys). The introduction summarizes the important role of Cys as an essential amino acid, techniques for its sensing, and the utilization of electrochemical methods and chemically modified electrodes for its determination. The main section covers voltammetric and amperometric sensing of Cys based on glassy carbon electrodes, screen printed electrodes, and carbon paste electrodes, modified with various electrocatalytic materials. The conclusion section discusses the current challenges of Cys determination and the future perspectives.
RESUMO
Climate change, global warming, and population growth have led researchers to use eco-sociable procedures for the N2 reduction reaction. It has discovered that N2 molecule can be transformed into NH3 in ambient circumstances with nanocomposites upon visible irradiation. In this research paper, a new visible-light-driven photocatalyst was constructed, with various weight percents of FeOCl particles (10, 20, 30, and 40%) that have adhered on NS-CN. Subsequently, multiple features of the nanocomposites were assayed in detail. The results illustrated that the NS-CN/FeOCl (20%) system has remarkable photoactivity in the NH4+ production reaction in comparison with the NS-CN and CN, which showed 2.5 and 8.6 higher activity, respectively. The durability of NS-CN/FeOCl (20%) system, as a substantial factor, was assayed for 5 recycles. Moreover, the effect of electron quenchers, pH of media, and solvent was studied. At last, a feasible Z-scheme mechanism for the remarkable improvement of N2 fixation efficiency was offered.