Enhanced elastic stability of a topologically disordered crystalline metal-organic framework.

By virtue of their open network structures and low densities, metal-organic frameworks (MOFs) are soft materials that exhibit elastic instabilities at low applied stresses. The conventional strategy for improving elastic stability is to increase the connectivity of the underlying MOF network, which necessarily increases the material density and reduces the porosity. Here we demonstrate an alternative paradigm, whereby elastic stability is enhanced in a MOF with an aperiodic network topology. We use a combination of variable-pressure single-crystal X-ray diffraction measurements and coarse-grained lattice-dynamical calculations to interrogate the high-pressure behaviour of the topologically aperiodic system TRUMOF-1, which we compare against that of its ordered congener MOF-5. We show that the topology of the former quenches the elastic instability responsible for pressure-induced framework collapse in the latter, much as irregularity in the shapes and sizes of stones acts to prevent cooperative mechanical failure in drystone walls. Our results establish aperiodicity as a counter-intuitive design motif in engineering the mechanical properties of framework structures that is relevant to MOFs and larger-scale architectures alike.

Torsional flexibility in zinc-benzenedicarboxylate metal-organic frameworks.

We explore the role and nature of torsional flexibility of carboxylate-benzene links in the structural chemistry of metal-organic frameworks (MOFs) based on Zn and benzenedicarboxlyate (bdc) linkers. A particular motivation is to understand the extent to which such flexibility is important in stabilising the unusual topologically aperiodic phase known as TRUMOF-1. We compare the torsion angle distributions of TRUMOF-1 models with those for crystalline Zn/1,3-bdc MOFs, including a number of new materials whose structures we report here. We find that both periodic and aperiodic Zn/1,3-bdc MOFs sample a similar range of torsion angles, and hence the formation of TRUMOF-1 does not require any additional flexibility beyond that already evident in chemically-related crystalline phases. Comparison with Zn/1,4-bdc MOFs does show, however, that the lower symmetry of the 1,3-bdc linker allows access to a broader range of torsion angles, reflecting a greater flexibility of this linker.

Formation of porous ice frameworks at room temperature.

Bulk crystalline ices with ultralow densities have been demonstrated to be thermodynamically metastable at negative pressures. However, the direct formation of these bulk porous ices from liquid water at negative pressures is extremely challenging. Inspired by approaches toward porous media based on host-guest chemistry, such as metal-organic frameworks and covalent organic frameworks, we herein demonstrate via molecular dynamics simulations that a class of ultralow-density porous ices with upright channels can be formed spontaneously from liquid water at 300 K with the assistance of carbon nanotube arrays. We refer to these porous ice polymorphs as water oxygen-vertex frameworks (WOFs). Notably, our simulations revealed that the liquid-WOF phase transition is first-order and occurs at room temperature. All the WOFs exhibited the unique structural feature that they can be regarded as assemblies of nanoribbons of hexagonal bilayer ice (2D ice I) at their armchair or zigzag edges. Based on density functional theory calculations, a comprehensive phase diagram of the WOFs was constructed considering both the thermodynamic and thermal stabilities of the porous ices at negative pressures. Like other types of porous media, these WOFs may be applicable to gas storage, purification, and separation. Moreover, these biocompatible porous ice networks may be exploited as medical-related carriers.

Cambrian 'sap-sucking' molluscan radulae among small carbonaceous fossils (SCFs).

Molluscs have produced an extensive fossil record, owing to the prevalence of robust biomineralized shells among this clade. By contrast, most other components of molluscan anatomy are seldom preserved. Importantly, little is known of the evolutionary history of the unique molluscan feeding apparatus-the radula. A scarcity of fossil radulae has hampered our understanding of the ancestral condition, and of the dietary ecology of early molluscs. The handful of known fossil radulae all point to early molluscs as simple deposit feeders that obtained food via rasping or scraping. This study reports microscopic radulae preserved as 'small carbonaceous fossils' (SCFs) from Cambrian (Stage 4-Wuliuan, approximately 514-504.5 Ma) strata of Sweden. These rare fossil radulae offer novel insights into the feeding anatomy and ecology of early molluscs. Each radula comprises a uniseriate arc of (≤10) blade-shaped teeth, fringed by a slicing keel. This distinctive morphology is strikingly convergent with the radulae of extant sacoglossan heterobranch gastropods-such radulae are specially adapted for piercing the cell walls of green algal tissues to enable suctorial feeding on the cytoplasm contents. Discovery of analogous Cambrian radulae demonstrates this specialized form of herbivory had already evolved among molluscs more than half a billion years ago.

Preparation and Structure of the Ion-Conducting Mixed Molecular Glass Ga2I3.17.

Modern functional glasses have been prepared from a wide range of precursors, combining the benefits of their isotropic disordered structures with the innate functional behavior of their atomic or molecular building blocks. The enhanced ionic conductivity of glasses compared to their crystalline counterparts has attracted considerable interest for their use in solid-state batteries. In this study, we have prepared the mixed molecular glass Ga2I3.17 and investigated the correlations between the local structure, thermal properties, and ionic conductivity. The novel glass displays a glass transition at 60 °C, and its molecular make-up consists of GaI4- tetrahedra, Ga2I62- heteroethane ions, and Ga+ cations. Neutron diffraction was employed to characterize the local structure and coordination geometries within the glass. Raman spectroscopy revealed a strongly localized nonmolecular mode in glassy Ga2I3.17, coinciding with the observation of two relaxation mechanisms below Tg in the AC admittance spectra.

Effect of ammonium fluoride doping on the ice III to ice IX phase transition.

Ice III is a hydrogen-disordered phase of ice that is stable between about 0.2 and 0.35 GPa. Upon cooling, it transforms to its hydrogen-ordered counterpart ice IX within the stability region of ice II. Here, the effect of ammonium fluoride doping on this phase transition is investigated, which is followed for the first time with in situ neutron diffraction. The a and c lattice constants are found to expand and contract, respectively, upon hydrogen ordering, yielding an overall negative volume change. Interestingly, the anisotropy in the lattice constants persists when ice IX is fully formed, and negative thermal expansion is observed. Analogous to the isostructural keatite and ß-spodumenes, the negative thermal expansion can be explained through the buildup of torsional strain within the a-b plane as the helical "springs" within the structure expand upon heating. The reversibility of the phase transition was demonstrated upon heating. As seen in diffraction and Raman spectroscopy, the ammonium fluoride doping induces additional residual hydrogen disorder in ice IX and is suggested to be a chemical way for the "excitation" of the configurational ice-rules manifold. Compared to ice VIII, the dopant-induced hydrogen disorder in ice IX is smaller, which suggests a higher density of accessible configurational states close to the ground state in ice IX. This study highlights the importance of dopants for exploring the water's phase diagram and underpins the highly complex solid-state chemistry of ice.

Getting hit by the bus around the world - a global perspective on goal directed treatment of massive hemorrhage in trauma.

PURPOSE OF REVIEW: Major trauma remains one of the leading causes of death worldwide with traumatic brain injury and uncontrolled traumatic bleeding as the main determinants of fatal outcome. Interestingly, the therapeutic approach to trauma-associated bleeding and coagulopathy shows differences between geographic regions, that are reflected in different guidelines and protocols. RECENT FINDINGS: This article summarizes main principles in coagulation diagnostics and compares different strategies for treatment of massive hemorrhage after trauma in different regions of the world. How would a bleeding trauma patient be managed if they got hit by the bus in the United States, United Kingdom, Germany, Switzerland, Austria, Denmark, Australia, or in Japan? SUMMARY: There are multiple coexistent treatment standards for trauma-induced coagulopathy in different countries and different trauma centers. Most of them initially follow a protocol-based approach and subsequently focus on predefined clinical and laboratory targets.

Modular Design via Multiple Anion Chemistry of the High Mobility van der Waals Semiconductor Bi4O4SeCl2.

Making new van der Waals materials with electronic or magnetic functionality is a chemical design challenge for the development of two-dimensional nanoelectronic and energy conversion devices. We present the synthesis and properties of the van der Waals material Bi4O4SeCl2, which is a 1:1 superlattice of the structural units present in the van der Waals insulator BiOCl and the three-dimensionally connected semiconductor Bi2O2Se. The presence of three anions gives the new structure both the bridging selenide anion sites that connect pairs of Bi2O2 layers in Bi2O2Se and the terminal chloride sites that produce the van der Waals gap in BiOCl. This retains the electronic properties of Bi2O2Se while reducing the dimensionality of the bonding network connecting the Bi2O2Se units to allow exfoliation of Bi4O4SeCl2 to 1.4 nm height. The superlattice structure is stabilized by the configurational entropy of anion disorder across the terminal and bridging sites. The reduction in connective dimensionality with retention of electronic functionality stems from the expanded anion compositional diversity.

Resolving Anharmonic Lattice Dynamics in Molecular Crystals with X-Ray Diffraction and Terahertz Spectroscopy.

Molecular crystals are increasingly being used for advanced applications, ranging from pharmaceutics to organic electronics, with their utility dictated by a combination of their three-dimensional structures and molecular dynamics-with anharmonicity in the low-frequency vibrations crucial to numerous bulk phenomena. Through the use of temperature-dependent x-ray diffraction and terahertz time-domain spectroscopy, the structures and dynamics of a pair of isomeric molecular crystals exhibiting nearly free rotation of a CF_{3} functional group at ambient conditions are fully characterized. Using a recently developed solid-state anharmonic vibrational correction, and applying it to a molecular crystal for the first time, the temperature-dependent spatial displacements of atoms along particular terahertz modes are obtained, and are found to be in excellent agreement with the experimental observations, including the assignment of a previously unexplained absorption feature in the low-frequency spectrum of one of the solids.

Kinetic Control of Interpenetration in Fe-Biphenyl-4,4'-dicarboxylate Metal-Organic Frameworks by Coordination and Oxidation Modulation.

Phase control in the self-assembly of metal-organic frameworks (MOFs) is often a case of trial and error; judicious control over a number of synthetic variables is required to select the desired topology and control features such as interpenetration and defectivity. Herein, we present a comprehensive investigation of self-assembly in the Fe-biphenyl-4,4'-dicarboxylate system, demonstrating that coordination modulation can reliably tune between the kinetic product, noninterpenetrated MIL-88D(Fe), and the thermodynamic product, two-fold interpenetrated MIL-126(Fe). Density functional theory simulations reveal that correlated disorder of the terminal anions on the metal clusters results in hydrogen bonding between adjacent nets in the interpenetrated phase and this is the thermodynamic driving force for its formation. Coordination modulation slows self-assembly and therefore selects the thermodynamic product MIL-126(Fe), while offering fine control over defectivity, inducing mesoporosity, but electron microscopy shows MIL-88D(Fe) persists in many samples despite not being evident by diffraction. Interpenetration control is also demonstrated using the 2,2'-bipyridine-5,5'-dicarboxylate linker; it is energetically prohibitive for it to adopt the twisted conformation required to form the interpenetrated phase, although multiple alternative phases are identified due to additional coordination of Fe cations to its N donors. Finally, we introduce oxidation modulation-the use of metal precursors in different oxidation states from that found in the final MOF-to kinetically control self-assembly. Combining coordination and oxidation modulation allows the synthesis of pristine MIL-126(Fe) with BET surface areas close to the predicted maximum for the first time, suggesting that combining the two may be a powerful methodology for the controlled self-assembly of high-valent MOFs.

Caught in the act: priapulid burrowers in early Cambrian substrates.

The fossilized traces of burrowing worms have taken on a considerable importance in studies of the Cambrian explosion, partly because of their use in defining the base of the Cambrian. Foremost among these are the treptichnids, a group of relatively large open probing burrows that have sometimes been assigned to the activities of priapulid scalidophoran worms. Nevertheless, most Cambrian burrows have an uncertain progenitor. Here we report a suite of exceptionally preserved trace and body fossils from sandstones of the lower Cambrian (Stage 4) File Haidar Formation of southern Sweden that can unequivocally be assigned to a scalidophoran producer. We further present the first burrow casts produced via actualistic experiments on living priapulids, and demonstrate the remarkable morphological parallels between these modern and Cambrian fossil equivalents. In addition, co-occurrence of scalidophoran-derived cuticular remains permits a unique synthesis of evidence from trace fossil, body and organic remains. Comparative analysis of these exceptionally preserved fossils supports a scalidophoran producer for treptichnids and by extension suggests a latest Ediacaran origin of the ecdysozoan clade.

Divergent Elementoboration: 1,3-Haloboration versus 1,1-Carboboration of Propargyl Esters.

This work showcases the 1,3-haloboration reaction of alkynes in which boron and chlorine add to propargyl systems in a proposed sequential oxazoliumborate formation with subsequent ring-opening and chloride migration. In addition, the functionalization of these propargyl esters with dimethyl groups in the propargylic position leads to stark differences in reactivity whereby a formal 1,1-carboboration prevails to give the 2,2-dichloro-3,4-dihydrodioxaborinine products as an intramolecular chelate. Density functional theory calculations are used to rationalize the distinct carboboration and haloboration pathways. Significantly, this method represents a metal-free route to highly functionalized compounds in a single step to give structurally complex products.

Predicting vapor liquid equilibria using density functional theory: A case study of argon.

Predicting vapor liquid equilibria (VLE) of molecules governed by weak van der Waals (vdW) interactions using the first principles approach is a significant challenge. Due to the poor scaling of the post Hartree-Fock wave function theory with system size/basis functions, the Kohn-Sham density functional theory (DFT) is preferred for systems with a large number of molecules. However, traditional DFT cannot adequately account for medium to long range correlations which are necessary for modeling vdW interactions. Recent developments in DFT such as dispersion corrected models and nonlocal van der Waals functionals have attempted to address this weakness with a varying degree of success. In this work, we predict the VLE of argon and assess the performance of several density functionals and the second order Møller-Plesset perturbation theory (MP2) by determining critical and structural properties via first principles Monte Carlo simulations. PBE-D3, BLYP-D3, and rVV10 functionals were used to compute vapor liquid coexistence curves, while PBE0-D3, M06-2X-D3, and MP2 were used for computing liquid density at a single state point. The performance of the PBE-D3 functional for VLE is superior to other functionals (BLYP-D3 and rVV10). At T = 85 K and P = 1 bar, MP2 performs well for the density and structural features of the first solvation shell in the liquid phase.

The Influence of Intrinsic Framework Flexibility on Adsorption in Nanoporous Materials.

For applications of metal-organic frameworks (MOFs) such as gas storage and separation, flexibility is often seen as a parameter that can tune material performance. In this work we aim to determine the optimal flexibility for the shape selective separation of similarly sized molecules (e.g., Xe/Kr mixtures). To obtain systematic insight into how the flexibility impacts this type of separation, we develop a simple analytical model that predicts a material's Henry regime adsorption and selectivity as a function of flexibility. We elucidate the complex dependence of selectivity on a framework's intrinsic flexibility whereby performance is either improved or reduced with increasing flexibility, depending on the material's pore size characteristics. However, the selectivity of a material with the pore size and chemistry that already maximizes selectivity in the rigid approximation is continuously diminished with increasing flexibility, demonstrating that the globally optimal separation exists within an entirely rigid pore. Molecular simulations show that our simple model predicts performance trends that are observed when screening the adsorption behavior of flexible MOFs. These flexible simulations provide better agreement with experimental adsorption data in a high-performance material that is not captured when modeling this framework as rigid, an approximation typically made in high-throughput screening studies. We conclude that, for shape selective adsorption applications, the globally optimal material will have the optimal pore size/chemistry and minimal intrinsic flexibility even though other nonoptimal materials' selectivity can actually be improved by flexibility. Equally important, we find that flexible simulations can be critical for correctly modeling adsorption in these types of systems.

Room Temperature Magnetically Ordered Polar Corundum GaFeO3 Displaying Magnetoelectric Coupling.

The polar corundum structure type offers a route to new room temperature multiferroic materials, as the partial LiNbO3-type cation ordering that breaks inversion symmetry may be combined with long-range magnetic ordering of high spin d5 cations above room temperature in the AFeO3 system. We report the synthesis of a polar corundum GaFeO3 by a high-pressure, high-temperature route and demonstrate that its polarity arises from partial LiNbO3-type cation ordering by complementary use of neutron, X-ray, and electron diffraction methods. In situ neutron diffraction shows that the polar corundum forms directly from AlFeO3-type GaFeO3 under the synthesis conditions. The A3+/Fe3+ cations are shown to be more ordered in polar corundum GaFeO3 than in isostructural ScFeO3. This is explained by DFT calculations which indicate that the extent of ordering is dependent on the configurational entropy available to each system at the very different synthesis temperatures required to form their corundum structures. Polar corundum GaFeO3 exhibits weak ferromagnetism at room temperature that arises from its Fe2O3-like magnetic ordering, which persists to a temperature of 408 K. We demonstrate that the polarity and magnetization are coupled in this system with a measured linear magnetoelectric coupling coefficient of 0.057 ps/m. Such coupling is a prerequisite for potential applications of polar corundum materials in multiferroic/magnetoelectric devices.

Metal-Organic Nanosheets Formed via Defect-Mediated Transformation of a Hafnium Metal-Organic Framework.

We report a hafnium-containing MOF, hcp UiO-67(Hf), which is a ligand-deficient layered analogue of the face-centered cubic fcu UiO-67(Hf). hcp UiO-67 accommodates its lower ligand:metal ratio compared to fcu UiO-67 through a new structural mechanism: the formation of a condensed "double cluster" (Hf12O8(OH)14), analogous to the condensation of coordination polyhedra in oxide frameworks. In oxide frameworks, variable stoichiometry can lead to more complex defect structures, e.g., crystallographic shear planes or modules with differing compositions, which can be the source of further chemical reactivity; likewise, the layered hcp UiO-67 can react further to reversibly form a two-dimensional metal-organic framework, hxl UiO-67. Both three-dimensional hcp UiO-67 and two-dimensional hxl UiO-67 can be delaminated to form metal-organic nanosheets. Delamination of hcp UiO-67 occurs through the cleavage of strong hafnium-carboxylate bonds and is effected under mild conditions, suggesting that defect-ordered MOFs could be a productive route to porous two-dimensional materials.

A novel sulfonamide non-classical carbenoid: a mechanistic study for the synthesis of enediynes.

Alkynyl sulfonamides undergo sequential 1,4- then 1,2-addition/rearrangement with lithium acetylides to yield enediynes in the absence of any promoters or catalysts. Mechanistic investigations suggest that the reaction proceeds via 1,4-conjugate addition of the nucleophile to the unsaturated system to give a key alkenyl lithium species which is stabilised by an intramolecular coordination effect by a sulfonamide oxygen atom. This species can be considered a vinylidene carbenoid given the carbon atom bears both an anion (as a vinyllithium) and a leaving group (the sulfonamide). The intramolecular coordination effect serves to stabilise the vinyllithium but activates the sulfonamide motif towards nucleophilic attack by a second mole of acetylide. The resulting species can then undergo rearrangement to yield the enediyne framework in a single operation with concomitant loss of aminosulfinate.

Modular and predictable assembly of porous organic molecular crystals.

Nanoporous molecular frameworks are important in applications such as separation, storage and catalysis. Empirical rules exist for their assembly but it is still challenging to place and segregate functionality in three-dimensional porous solids in a predictable way. Indeed, recent studies of mixed crystalline frameworks suggest a preference for the statistical distribution of functionalities throughout the pores rather than, for example, the functional group localization found in the reactive sites of enzymes. This is a potential limitation for 'one-pot' chemical syntheses of porous frameworks from simple starting materials. An alternative strategy is to prepare porous solids from synthetically preorganized molecular pores. In principle, functional organic pore modules could be covalently prefabricated and then assembled to produce materials with specific properties. However, this vision of mix-and-match assembly is far from being realized, not least because of the challenge in reliably predicting three-dimensional structures for molecular crystals, which lack the strong directional bonding found in networks. Here we show that highly porous crystalline solids can be produced by mixing different organic cage modules that self-assemble by means of chiral recognition. The structures of the resulting materials can be predicted computationally, allowing in silico materials design strategies. The constituent pore modules are synthesized in high yields on gram scales in a one-step reaction. Assembly of the porous co-crystals is as simple as combining the modules in solution and removing the solvent. In some cases, the chiral recognition between modules can be exploited to produce porous organic nanoparticles. We show that the method is valid for four different cage modules and can in principle be generalized in a computationally predictable manner based on a lock-and-key assembly between modules.