Optimal resource allocation model for COVID-19: a systematic review and meta-analysis.

BACKGROUND: A lack of health resources is a common problem after the outbreak of infectious diseases, and resource optimization is an important means to solve the lack of prevention and control capacity caused by resource constraints. This study systematically evaluated the similarities and differences in the application of coronavirus disease (COVID-19) resource allocation models and analyzed the effects of different optimal resource allocations on epidemic control. METHODS: A systematic literature search was conducted of CNKI, WanFang, VIP, CBD, PubMed, Web of Science, Scopus and Embase for articles published from January 1, 2019, through November 23, 2023. Two reviewers independently evaluated the quality of the included studies, extracted and cross-checked the data. Moreover, publication bias and sensitivity analysis were evaluated. RESULTS: A total of 22 articles were included for systematic review; in the application of optimal allocation models, 59.09% of the studies used propagation dynamics models to simulate the allocation of various resources, and some scholars also used mathematical optimization functions (36.36%) and machine learning algorithms (31.82%) to solve the problem of resource allocation; the results of the systematic review show that differential equation modeling was more considered when testing resources optimization, the optimization function or machine learning algorithm were mostly used to optimize the bed resources; the meta-analysis results showed that the epidemic trend was obviously effectively controlled through the optimal allocation of resources, and the average control efficiency was 0.38(95%CI 0.25-0.51); Subgroup analysis revealed that the average control efficiency from high to low was health specialists 0.48(95%CI 0.37-0.59), vaccines 0.47(95%CI 0.11-0.82), testing 0.38(95%CI 0.19-0.57), personal protective equipment (PPE) 0.38(95%CI 0.06-0.70), beds 0.34(95%CI 0.14-0.53), medicines and equipment for treatment 0.32(95%CI 0.12-0.51); Funnel plots and Egger's test showed no publication bias, and sensitivity analysis suggested robust results. CONCLUSION: When the data are insufficient and the simulation time is short, the researchers mostly use the constructor for research; When the data are relatively sufficient and the simulation time is long, researchers choose differential equations or machine learning algorithms for research. In addition, our study showed that control efficiency is an important indicator to evaluate the effectiveness of epidemic prevention and control. Through the optimization of medical staff and vaccine allocation, greater prevention and control effects can be achieved.

Giant ab-Plane Birefringence in Quasi-1D Fibrous Red Phosphorus.

Quasi-one-dimensional (quasi-1D) van der Waals crystal fibrous red phosphorus (RP) exhibits pronounced in-plane optical anisotropy, positioning it as a potential candidate for polarization-related micro-nano devices. Unfortunately, a comprehensive investigation into the complex refractive index of fibrous RP and the structure-activity relationship connecting the distinctive quasi-1D structure with optical anisotropy is currently deficient. Herein, we have collectively determined the complex refractive index of the fibrous RP flakes within the ab-plane through Kramers-Kronig (KK) analysis and theoretical calculation. Notably, the maximum birefringence of fibrous RP reaches 0.642@475 nm with an absolute extinction coefficient of only 0.08, superior to the reported traditional optical crystals and the emerging low-dimensional materials as well. The remarkable birefringence can be attributed to the synergistic influence of the large electronic dipole polarizability, anisotropic electron density distribution and the distortion of stereochemically active lone pair (SCALP). This work demonstrates the potential of fibrous RP for polarization-sensitive devices, illuminating possibilities to exploit novel giant birefringent crystals based on the structure-activity relationship.

Room-Temperature Solvent Evaporation Induced Crystallization: A General Strategy for Growth of Halide Perovskite Single Crystals by Applying the Le Chatelier's Principle.

The growth of high-quality halide perovskite single crystals is imperative to study their intrinsic physical properties and to realize high-performance optoelectronic devices. Here, a room-temperature solvent evaporation-induced crystallization (RTSEIC) method is reported based on Le Chatelier's principle, which provides a general strategy to grow halide perovskite single crystals including 3D, 2D, 1D, and 0D, and either hybrid or all-inorganic halide perovskites. Taking 2D n-BA2 PbBr4 (n-BA = butylammonium) as an example, the room-temperature crystallization kinetics is demonstrated. The centimeter-sized n-BA2 PbBr4 single crystals exhibit an extremely small full width at half maximum (FWHM) of 0.024° in (0 0 2) plane rocking curve and a small trap density of 2.74 × 1010 cm-3 . The superior crystalline quality endows the n-BA2 PbBr4 single crystal ultraviolet photodetectors with recorded performance among reported n-BA2 PbBr4 ultraviolet photodetectors, demonstrating a detectivity reaching 1.8 × 1013 Jones, a fast response time of 55 µs and a high on-off ratio of 104 . The low-cost, simple, general, and efficient RTSEIC method is anticipated to promote the blossoming of halide perovskites single crystals.

Integrated Analysis of the Association Between Variants at PAX7 and NSCL/P in the Han Population.

OBJECTIVE: Paired box 7 (PAX7) has been considered as a candidate gene for non-syndromic cleft lip with or without palate (NSCL/P). However, there is no research for the XXX, and previous studies concentrated on limited variants. This study aimed to conduct sufficiently dense and powerful scans of variants at PAX7 and explored the roles of variants at PAX7 in NSCL/P among the XXX. DESIGN: Targeted region sequencing was performed to thoroughly screen variations, followed by a two-phase association analysis. 159 NSCL/P cases and 542 controls were analyzed in phase 1. Then in phase 2, the validation study was performed using 1626 cases and 2255 controls. We also explored the roles of variants at PAX7 gene in NSCL/P subtypes. Additionally, indirect associations were found by calculating LD and haplotypes. SETTING: The study was conducted in XXX. PATIENTS, PARTICIPANTS: 159 NSCL/P cases and 542 controls were analyzed in phase 1. Then in phase 2, the validation study was performed using 1626 cases and 2255 controls. INTERVENTIONS: Blood samples were collected. MAIN OUTCOME MEASURES: To explore the association analysis between variants at PAX7 and NSCL/P in XXX. RESULTS: The results showed that rs2236810, rs114882979 and rs2236804 were significantly associated with NSCL/P, which were predicted to have regulatory functions. Besides, variants at PAX7 function differently in the NSCL/P subtypes. We also discovered a PAX7 missense variant, NM_001135254 p.A369 V (NM_002584.2:c.1106C > T). CONCLUSIONS: In summary, we confirmed 3 SNPs at PAX7 were significantly associated with NSCL/P in XXX and identified a missense variant, NM_001135254 p.A369 V (NM_002584.2:c.1106C > T).

Enhanced self-powered ion-modulated photodetector based on an asymmetric composite structure of superionic conductor RbAg4I5 and graphene.

Traditional strategies for self-powered devices face limitations in performance improvement due to the trade-off relationship between different parameters. Here, a new kind of ion-modulation self-powered photodetector is first proposed and fabricated by depositing superionic conductor RbAg4I5 on one side of monolayer graphene. The graphene homojunction is successfully formed at the boundary of the asymmetric structure due to the formation of bound states of ions and electrons at the contact interface. This kind of homojunction avoids the trade off between response parameters of traditional self-powered devices because the dissociation of bound states under light irradiation dominates the generation of a photocurrent. The experimental results indicate that the prepared photodetector can achieve great photo response with responsivity of 20 mA/W and a response speed of 700 µs for ultraviolet and visible light when no bias is applied, which is better than most existing graphene-based self-powered devices in single or overall parameters. Further, a semi-quantitative model is systematically established according to the internal mechanism and realizes a good consistency with experimental results. The work provides a new idea and offers the foundation to develop excellent self-powered devices based on superionic materials with good properties in controllability and modulation.

Association analysis of SNPs in GRHL3, FAF1, and KCNJ2 with NSCPO sub-phenotypes in Han Chinese.

OBJECTIVES: Non-syndromic cleft palate only (NSCPO) is a common congenital deformity with complex etiologies. GRHL3, FAF1, and KCNJ2 have been reported to be involved in the pathogenesis of NSCPO. Up till now, there have been no replication studies based on large Han Chinese. Therefore, this study aimed to investigate associations between GRHL3, FAF1, KCNJ2, and NSCPO sub-phenotypes patients in Han Chinese. MATERIALS AND METHODS: Firstly, we selected 2 SNPs based on previous literatures: FAF1 (rs3827730) and GRHL3 (rs41268753). Also, we selected 8 tagSNPs in GRHL3 (rs557811, rs609352, rs10903078, rs6659209, rs12401714, rs12568599, rs3887581, rs12024148) and 2 tagSNPs in KCNJ2 (rs75855040 and rs236514). Afterward, we evaluated these SNPs among 1668 NSCPO patients and 1811 normal controls from Han Chinese. Following data were analyzed by PLINK and Haploview program. RESULTS: Association analysis under additive model showed that allele A at rs12568599 in GRHL3 gene is significantly associated with NSCPO (p = 0.0034, OR = 1.38 and 95%CI: 1.11-1.72) and its sub-phenotype incomplete cleft palate (ICP) (p = 0.0039, OR = 1.4 and 95%CI: 1.11-1.75), and it could increase the risk of both NSCPO and ICP. CONCLUSIONS: This study firstly found that rs12568599 in GRHL3 is associated with NSCPO and ICP in Han Chinese, indicating that sub-phenotypes of NSCPO have different etiologies.

A Novel Missense Variant in the TCOF1 Gene in one Chinese Case With Treacher Collins Syndrome.

The purpose of this study is to analyze the clinical characteristics of a Treacher Collins syndrome (TCS) patient carrying a de novo variant of TCOF1, and briefly analyze the correlation between genetic results and clinical features. Also, the pathogenesis and clinical treatment of TCS are reviewed.A Chinese pedigree with TCS containing 8 members was enrolled. Phenotype of the proband was evaluated by a surgeon, then whole exome sequencing of the proband was performed. Then we verified the proband-derived variants by Sanger sequencing in the pedigree. Correlation between genotype and phenotype was analyzed.The study was conducted in a stomatological hospital.A Chinese pedigree with TCS containing 8 members.To ascertain the genetic variants in the Chinese pedigree with TCS.Blood samples were collected.We reported a case of typical TCS with a de novo missense variant (NM_001371623.1:c.38T>G, p.(Leu13Arg)) in exon 1 of TCOF1, who presented asymmetrical facial abnormalities, including downward slanting of the palpebral fissures, sparse eyebrows, lateral tilt of the eyeballs, bilateral external ears deformities, hypoplasia of midface, reduction of the zygomatic body, bilateral orbital invagination, right external auditory canal atresia, mandibular ramus short deformity, cleft palate and the whole face was convex.This research found a novel variant of TCS in Chinese, expanding the spectrum of TCS pathogenic variants. Genetic results combined with clinical phenotype can make a definite diagnosis and provide genetic counseling for the family.

Electrically driven transport of photoinduced hot carriers in carbon nanotube fibers.

Hot carriers play a significant role in applications of photovoltaics, photodetection, and photocatalysis. However, effective methods for observing the ultrafast dynamic processes of hot carriers are concentrated on the time domain, on which it is difficult and complex to operate. We propose a novel, to the best of our knowledge, and creative strategy to convert the time-domain dynamic process into a spatially thermal redistribution in suspended carbon nanotube fibers. The large average free path of photoinduced hot holes ensures a prominent offset of temperature distribution. The experimental results confirm the theory about electrically driven transport of hot holes, which has rarely been reported.

Growth mechanism and photoelectric properties of a silver nanowire network prepared by solid state ionics method.

A macroscopic silver nanowire (AgNW) network is grown by solid state ionics method. The ion flow during growth of the AgNW network is controlled by maintaining a current in the order of 10-7 A. Scanning electron microscopy (SEM) analysis reveals that the growth direction of AgNWs in the network is irregular and spread evenly in all directions and the nanowires are 40-160 nm in diameter. The microcosmic mechanism of silver nanostructures grown by the solid state ionics method is established by real time and in situ SEM analysis of the growth process of the AgNW networks. To study the photoelectric properties of the network, a self-supported AgNW network sample (∼1 mm wide and 8 mm long) is irradiated with lasers of different wavelengths of 375, 405, 532, 633, 808, and 1064 nm and 10.6 µm, and changes in the current between the two ends of the sample are recorded. The network displays negative photoconductance effect, and the maximum light responsivity is 43 mA W-1. The network displays light responsivity in the ultraviolet light-to-mid-infrared light region, with response times of tens of milliseconds. These findings indicate that the AgNW network has broad application prospect in ultra-wide spectrum photoelectric detection.

Facile fabrication of eutectic gallium-indium alloy nanostructure and application in photodetection.

Eutectic gallium-indium (EGaIn) alloy is a kind of liquid metal and has attracted much attention due to good properties. In order to satisfy the trend of miniaturization and realize more practical applications, the exploration for preparation method and properties of EGaIn at nanoscale are very important. Here, facile vacuum thermal evaporation method is developed to fabricate EGaIn nanostructures. The EGaIn nanoparticle and nanofilm with naturally formed 5 nm thick oxide layers are well prepared. The oxide film formed on the EGaIn surface is an important factor, making the properties of the nanostructure different from the properties of the bulk. Compared with ignorance of oxide layer in bulk materials, the proportion of oxide layer increases evidently in nanostructures, which produce obvious influence on the electric and optical properties. The rectifying characteristic and optoelectronic performance are experimentally observed. The EGaIn nanostructures can generate evident photocurrent responses with good responsivities (∼1 mA W-1) and response speed (∼1 s) under irradiation of 206 nm, 405 nm, 532 nm, 635 nm, 808 nm, 1064 nm and 10.6 µm lasers. These properties are completely different from the metallic properties of EGaIn bulk material.

RLA8-A New and Highly Effective Quadruple PPAR-α/γ/δ and GPR40 Agonist to Reverse Nonalcoholic Steatohepatitis and Fibrosis.

Nonalcoholic fatty liver disease (NAFLD) is a very common chronic hepatic disease, with nonalcoholic steatohepatitis (NASH) as a major and severe subcategory that can lead to cirrhosis and hepatocellular carcinoma, and thereby to a high mortality rate. Currently, there has been no approved drug to treat NAFLD or NASH. The current study has presented RLA8, a novel and balanced quadruple agonist for hepatic lipid metabolism and inflammation-related peroxisome proliferator-activated receptors (PPARs)-α/γ/δ and G protein-coupled receptor 40 (GPR40), as a NASH drug candidate. The efficacy of RLA8 to treat NASH was evaluated in vivo using two mouse models induced by methionine/choline-deficient diet or by high-fat diet, respectively. RLA8 was shown to improve serum alanine aminotransferase and high-density lipoprotein cholesterol levels, reduce hepatic free fatty acid and triglyceride levels, and alleviate insulin resistance. Cytokine and lipoperoxide analysis revealed that RLA8 could reduce oxidative stress and inflammation. Histochemical and morphologic examination of mouse livers showed that RLA8 could improve pathologic changes such as steatosis, ballooning, collagen fiber, and inflammation. Polymerase chain reaction and Western blot analyses proved that RLA8 could result in PPARs and GPR40 activation, accompanied by upregulation of the 5'AMP-activated protein kinase-acetyl-CoA carboxylase pathway and inhibition of the expression of lipogenic genes and proteins, which provided more insights into its action mechanisms. In summary, RLA8 has significantly better efficacy to improve NASH-induced liver damage such as steatosis, inflammation, and fibrosis, and, consequently, it represents a new and highly promising NASH drug candidate that is worthy of further investigation and development.

Self-assembled gold micro/nanostructure arrays based on superionic conductor RbAg4I5 films.

Herein, we propose a new strategy to fabricate gold (Au) micro/nanostructure arrays by photocatalytic solid-state electrochemical reaction between superionic conductor RbAg4I5 and Au films. The Au and RbAg4I5 films were successively deposited on a clean quartz substrate by vacuum thermal deposition method. A copper microgrid possessing periodic holes 100 µm in diameter was put above the RbAg4I5 film as a mask plate, whereupon irradiation from a 405 nm wavelength laser was used to diffuse gold ions (Au+ ions) into vacant silver sites of RbAg4I5 and transfer Au+ through ion passageways in the RbAg4I5 film. When the laser was turned off, the Au+ ions were easily reduced due to low activity compared to the silver (Ag+) ions. After multiple on/off cycles of the 405 nm laser, the irradiated area of uniform Au film exhibited a periodic structural unit array whose period was the same as that of the mask plate hole array. Atomic force microscope and scanning electron microscope images revealed that a self-assembled needle-like nanostructure array grew perpendicular to the substrate surface inside each circle's structural unit. The height of the grown nanostructure array increased with laser power density. Raman enhancement of the gold nanostructure array as substrate was detected using Rhodamine 6G (R6G) ethanol solutions as probe molecules. The enhancement effect increased with the height of the grown nanostructure array, and could increase by two orders of magnitude greater than that of unirradiated Au film. This strategy offers a new method for the micro/nanostructure processing of gold and provides microscale-array-mediated surface-enhancement Raman-scattering (SERS) substrates comprising Au nanostructures for application in high-sensitivity spectrum analysis.

Novel hypolipidemic conjugates of fatty acid and bile acid with lysine for linkage.

Novel fatty acid-bile acid conjugates (1a-1k) were designed and synthesized by coupling of the fatty acids to the 3-OH of bile acids using lysine for linkage. In the conjugates, the 24-COOH of the bile acids was kept intact to preserve liver-specific recognition. The ability of the newly synthesized conjugates (at 100 mg/kg dosage) to reduce total cholesterol (TC) and triglyceride (TG) levels in mice fed with high-fat diet (HFD) was evaluated. Conjugates of stearic acid with cholic acid and palmitic acid with ursodeoxycholic acid (at dosages of 50, 100, and 200 mg/kg) were further evaluated to determine their ability to reduce aspartate aminotransferase (AST), alanine aminotransferase (ALT), TC, and TG levels in mice fed with HFD. All conjugates showed potent hypolipidemic activity. Further investigation revealed that compounds 1c and 1 g not only dose-dependently reduced serum levels of TC and TG, but also inhibited the elevation of serum AST and ALT levels in mice fed with HFD. Thus, compounds 1c and 1 g are promising hypolipidemic agents with hepatocyte protective effects against HFD-induced liver damage.

Perovskite CH3NH3PbI3(Cl) Single Crystals: Rapid Solution Growth, Unparalleled Crystalline Quality, and Low Trap Density toward 10(8) cm(-3).

Single crystal reflects the intrinsic physical properties of a material, and single crystals with high-crystalline quality are highly desired for the acquisition of high-performance devices. We found that large single crystals of perovskite CH3NH3PbI3(Cl) could be grown rapidly from chlorine-containing solutions. Within 5 days, CH3NH3PbI3(Cl) single crystal as large as 20 mm × 18 mm × 6 mm was harvested. As a most important index to evaluate the crystalline quality, the full width at half-maximum (fwhm) in the high-resolution X-ray rocking curve (HR-XRC) of as-grown CH3NH3PbI3(Cl) single crystal was measured as 20 arcsec, which is far superior to so far reported CH3NH3PbI3 single crystals (∼1338 arcsec). The unparalleled crystalline quality delivered a low trap-state density of down to 7.6 × 10(8) cm(-3), high carrier mobility of 167 ± 35 cm(2) V(-1) s(-1), and long transient photovoltaic carrier lifetime of 449 ± 76 µs. The improvement in the crystalline quality, together with the rapid growth rate and excellent carrier transport property, provides state-of-the-art single crystalline hybrid perovskite materials for high-performance optoelectronic devices.

Terahertz photodetector based on double-walled carbon nanotube macrobundle-metal contacts.

We report on the characterization of a terahertz (THz) photodetector with an extremely simple structure consisting of only a macroscopic bundle of double-walled carbon nanotubes (DWCNTs) suspended between two metal electrodes. Polarization-sensitive, broadband, and significant photoresponse occurring at the DWCNT-metal contacts under THz illumination are observed with room-temperature photocurrent and photovoltage responsivities up to ∼16 mA/W and ∼0.2 V/W at 2.52 THz, respectively. Scanning photocurrent measurements provide evidence that the photothermoelectric mechanism dominates the detector response. The simple geometry and compact nature of our device make it suitable for integration and show promising applications for THz detection.

Photocurrent response of carbon nanotube-metal heterojunctions in the terahertz range.

We investigate the optoelectronic properties of a carbon nanotube (CNT)-metal heterostructure in the terahertz range. On the basis of terahertz time-domain spectroscopy characterization of a double-walled CNT (DWNT) film, we present and analyze the photocurrent measurement for a DWNT-nickel heterojunction illuminated by continuous-wave terahertz radiation. A significant current across the junction directly induced by terahertz excitation is observed and a negative photoconductivity behavior is found to occur in the device. The photocurrent shows a linear response to the bias voltage and the illumination power within the examined range. These phenomena support the feasibility of using CNT-metal heterojunctions as novel terahertz detectors.

Involvement of the ABCB1 C3435T Variant but Not the MTHFR C677T or MTHFR A1298C Variant in High-Dose Methotrexate-Induced Toxicity in Pediatric Acute Lymphoblastic Leukemia Patients in China.

Purpose: It remains unclear whether the MTHFR C677T, MTHFR A1298C and ABCB1 C3435T genetic variants are associated with methotrexate (MTX) elimination delay and high-dose MTX (HD-MTX) toxicities in the treatment of pediatric acute lymphoblastic leukemia (ALL). The aim of our study was to analyze the potential predictive role of MTHFR C677T, MTHFR A1298C and ABCB1 C3435T in toxicities and the relationship between these variants and MTX elimination delay during HD-MTX therapy in pediatric ALL patients. Patients and Methods: We conducted a retrospective study on ALL patients receiving HD-MTX treatment with available MTHFR C677T, MTHFR A1298C and ABCB1 C3435T genotype and 44-h plasma MTX levels. Logistic regression analyses and chi-square tests were used to assess the relationship between the variants and HD-MTX toxicities and MTX elimination delay. Results: Genotype frequencies were in Hardy-Weinberg equilibrium. MTX elimination delay did not significantly differ between MTHFR C677T and MTHFR A1298C or ABCB1 C3435T. Leukopenia (P=0.028), neutropenia (P=0.034) and oral mucositis (P=0.023) were 6.444-fold, 4.978-fold and 9.643-fold increased, respectively, in ABCB1 C3435T homozygous genotype (TT) patients compared to wild-type (CC) patients. No significant association was found between the toxicities investigated and MTHFR C677T or MTHFR A1298C. Conclusion: This study showed that the ABCB1 C3435T homozygous allele genotype (TT) is associated with increased MTX-related toxicities (leukopenia, neutropenia and oral mucositis). These results may help to distinguish pediatric ALL patients with a relatively high risk of MTX-related toxicities before HD-MTX infusion and optimize MTX treatment.

Evaluating the Demand for Nucleic Acid Testing in Different Scenarios of COVID-19 Transmission: A Simulation Study.

INTRODUCTION: The 2019 novel coronavirus (COVID-19) has been recognized as the most severe human infectious disease pandemic in the past century. To enhance our ability to control potential infectious diseases in the future, this study simulated the influence of nucleic acid testing on the transmission of COVID-19 across varied scenarios. Additionally, it assessed the demand for nucleic acid testing under different circumstances, aiming to furnish a decision-making foundation for the implementation of nucleic acid screening measures, the provision of emergency materials, and the allocation of human resources. METHODS: Considering the transmission dynamics of COVID-19 and the preventive measures implemented by countries, we explored three distinct levels of epidemic intensity: community transmission, outbreak, and sporadic cases. Integrating the theory of scenario analysis, we formulated six hypothetical epidemic scenarios, each corresponding to possible occurrences during different phases of the pandemic. We developed an improved SEIR model, validated its accuracy using real-world data, and conducted a comprehensive analysis and prediction of COVID-19 infections under these six scenarios. Simultaneously, we assessed the testing resource requirements associated with each scenario. RESULTS: We compared the predicted number of infections simulated by the modified SEIR model with the actual reported cases in Israel to validate the model. The root mean square error (RMSE) was 350.09, and the R-squared (R2) was 0.99, indicating a well-fitted model. Scenario 4 demonstrated the most effective prevention and control outcomes. Strengthening non-pharmaceutical interventions and increasing nucleic acid testing frequency, even under low testing capacity, resulted in a delayed epidemic peak by 78 days. The proportion of undetected cases decreased from 77.83% to 31.21%, and the overall testing demand significantly decreased, meeting maximum demand even with low testing capacity. The initiation of testing influenced case detection probability. Under high testing capacity, increasing testing frequency elevated the detection rate from 36.40% to 77.83%. Nucleic acid screening proved effective in reducing the demand for testing resources under diverse epidemic prevention and control strategies. While effective interventions and nucleic acid screening measures substantially diminished the demand for testing-related resources, varying degrees of insufficient testing capacity may still persist. CONCLUSIONS: The nucleic acid detection strategy proves effective in promptly identifying and isolating infected individuals, thereby mitigating the infection peak and extending the time to peak. In situations with constrained testing capacity, implementing more stringent measures can notably decrease the number of infections and alleviate resource demands. The improved SEIR model demonstrates proficiency in predicting both reported and unreported cases, offering valuable insights for future infection risk assessments. Rapid evaluations of testing requirements across diverse scenarios can aptly address resource limitations in specific regions, offering substantial evidence for the formulation of future infectious disease testing strategies.

Aniline antioxidants in road dust, parking lot dust, and green-belt soil in Harbin, a megacity in China: Occurrence, profile, and seasonal variation.

Aniline antioxidants (ANs) are widely used as industrial chemicals in products composed of rubber. ANs originate mainly from vehicles, where tire wear particles end up in dust and soil after being deposited on roads. Nowadays, limited information is available on the fate and seasonal variation of ANs in the road environment. In this study, we investigated the occurrence of 32 ANs in dust and soil from different road environments, including road dust, garage dust, parking lot dust, and green-belt soil. The total concentrations of ANs were 369 ng g-1 in road dust, 712 ng g-1 in garage dust, and 687 ng g-1 in parking lot dust. These concentrations are several times higher than that in green-belt soil (128 ng g-1). The highest concentrations of N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine (6PPD) were found in dust and soil. Furthermore, notable seasonal differences were observed, with significantly higher concentrations of ANs in autumn than those in spring. In the main urban area, roads with high traffic volume exhibited higher concentrations of ANs than those with low traffic volume, indicating that ANs were produced by vehicle-related sources.

Significantly enhanced photoresponse in carbon nanotube film/TiO2 nanotube array heterojunctions by pre-electroforming.

Traditional TiO2 based photodetectors (PDs) suffer from high dark resistance, which increases loss of photoexcited charge carriers. Here, we report a new and simple way to improve the performance of PDs based on double-walled carbon nanotube (DWCNT)/TiO2 nanotube heterojunctions. Highly ordered TiO2 nanotube arrays were fabricated using a two-step anodic oxidation method, and coated with a DWCNT film, which functioned as a semitransparent electrode and a photoactive layer. Via pre-electroforming, the device was switched from a high resistance state (HRS) to a low resistance state (LRS). At an applied bias of 1 V, the dark resistance was reduced from 926 to 0.67 kΩ, as a result of the formation of oxygen vacancy related conducting filaments. The photoresponse (ΔI = Ip - Id, where Ip and Id represents photocurrent and dark current, respectively) of the PD in LRS reached 816.76 µA W(-1) under 532 nm laser illumination and 802.89 µA W(-1) under 1064 nm laser irradiation, which is 965 and 3980 times higher, respectively, than those obtained from the HRS device under the same conditions. This strategy for enhancing the photoresponse of TiO2 based PDs may have applications in further improving the power conversion efficiency of dye-sensitized solar cells.