High efficiency diode-pumped Pr:LiLuF4 visible lasers in femtosecond-laser-written waveguides.

In this work we investigate the power scaling of diode-pumped Pr:LiLuF4 waveguide lasers produced by direct femtosecond writing. The waveguides studied consisted in depressed cladding waveguides with different geometries. We observed laser emission at 604 nm, achieving a maximum output power of 275 mW and a slope efficiency of 40%, and 721 nm, demonstrating 310 mW of output power and a slope efficiency of 50%. Moreover, we obtained, what we believe is for the first time in a diode-pumped waveguide, laser emission at 523 nm, with a maximum output power of 65 mW and a slope efficiency of 11%. In the end, we also demonstrated the first diode-pumped operation of a single-transverse-mode waveguide laser at 721 nm, reaching a maximum output power of 28 mW and maintaining a high quality beam with an M2 of 1.1.

Diode-pumped visible lasing in femtosecond-laser-written Pr:LiLuF4 waveguide.

In this Letter we report the realization of a femtosecond-laser-written diode-pumped Pr:LiLuF4 visible waveguide laser. The waveguide studied in this work consisted of a depressed-index cladding, whose design and fabrication were optimized to minimize the propagation loss. Laser emission has been achieved at 604 nm and 721 nm, with output power of 86 mW and 60 mW, respectively, and slope efficiencies of 16% and 14%. In addition, we obtained, for the first time in a praseodymium-based waveguide laser, stable continuous-wave laser operation at 698 nm (3 mW of output power and 0.46% of slope efficiency), corresponding to the wavelength necessary for the clock transition of the strontium-based atomic clock. The waveguide laser emission at this wavelength is mainly in the fundamental mode (i.e., the larger propagation constant mode) showing a nearly Gaussian intensity profile.

Continuous wave vertical emission from terahertz microcavity lasers with a dual injection scheme.

Quantum cascade lasers (QCLs) represent a most promising compact source at terahertz (THz) frequencies, but efficiency of their continuous wave (CW) operation still needs to be improved to achieve large-scale exploitation. Here, we demonstrate highly efficient operation of a subwavelength microcavity laser consisting of two evanescently coupled whispering gallery microdisk resonators. Exploiting a dual injection scheme for the laser cavity, single mode CW vertical emission at 3.3 THz is obtained at 10 K with 6.4 mA threshold current and 145 mW/A slope efficiency up to 320 µW emitted power measured in quasi-CW mode. The tuning of the laser emission directionality is also obtained by independently varying the pumping strength between the microdisks. By connecting the resonators through a suspended gold bridge, the laser out-coupling efficiency in the vertical direction is strongly enhanced. Owing to the high brightness, low-power consumption and CW operation, the proposed microcavity laser design could allow the realization of high-performance CW THz QCLs ready for massive parallelization.

Optomechanical response with nanometer resolution in the self-mixing signal of a terahertz quantum cascade laser.

Owing to their intrinsic stability against optical feedback (OF), quantum cascade lasers (QCLs) represent a uniquely versatile source to further improve self-mixing interferometry at mid-infrared and terahertz (THz) frequencies. Here, we show the feasibility of detecting with nanometer precision, the deeply subwavelength ($ \lt \lambda /6000 $<λ/6000) mechanical vibrations of a suspended $ {{\rm Si}_3}{{\rm N}_4} $Si3N4 membrane used as the external element of a THz QCL feedback interferometer. Besides representing an extension of the applicability of vibrometric characterization at THz frequencies, our system can be exploited for the realization of optomechanical applications, such as dynamical switching between different OF regimes and a still-lacking THz master-slave configuration.

THz Water Transmittance and Leaf Surface Area: An Effective Nondestructive Method for Determining Leaf Water Content.

Water availability is a major limiting factor in plant productivity and plays a key role in plant species distribution over a given area. New technologies, such as terahertz quantum cascade lasers (THz-QCLs) have proven to be non-invasive, effective, and accurate tools for measuring and monitoring leaf water content. This study explores the feasibility of using an advanced THz-QCL device for measuring the absolute leaf water content in Corylus avellana L., Laurus nobilis L., Ostrya carpinifolia Scop., Quercus ilex L., Quercus suber L., and Vitis vinifera L. (cv. Sangiovese). A recently proposed, simple spectroscopic technique was used, consisting in determining the transmission of the THz light beam through the leaf combined with a photographic measurement of the leaf area. A significant correlation was found between the product of the leaf optical depth (τ) and the leaf surface area (LA) with the leaf water mass (Mw) for all the studied species (Pearson's r test, p ≤ 0.05). In all cases, the best fit regression line, in the graphs of τLA as a function of Mw, displayed R2 values always greater than 0.85. The method proposed can be combined with water stress indices of plants in order to gain a better understanding of the leaf water management processes or to indirectly monitor the kinetics of leaf invasion by pathogenic bacteria, possibly leading to the development of specific models to study and fight them.

Understanding and overcoming fundamental limits of asymmetric light-light switches.

The interplay between interference and absorption leads to interesting phenomena like coherent perfect absorption and coherent perfect transparency (CPA and CPT), which can be exploited for fully optical modulation. While it is known that it is possible to harness CPA and CPT for switching a strong signal beam with a weak control beam, it is not immediate that this process suffers from a fundamental compromise between the device efficiency (quantified by device loss and modulation depth) and the asymmetry between signal and control intensity desired for operation. This article quantifies this compromise and outlines a possible way to overcome it by means of a combination of optical gain and loss in the same photonic component. A general formulation and a specific device realization are both discussed.

Symmetry enhanced non-reciprocal polarization rotation in a terahertz metal-graphene metasurface.

In the present article we numerically investigated the magneto-optical behaviour of a sub-wavelength structure composed by a monolayer graphene and a metallic metasurface of optical resonators. Using this hybrid graphene-metal structure, a large increase of the non-reciprocal polarization rotation of graphene can be achieved over a broad range of terahertz frequencies. We demonstrate that the symmetry of the resonator geometry plays a key role for the performance of the system: in particular, increasing the symmetry of the resonator the non-reciprocal properties can be progressively enhanced. Moreover, the possibility to exploit the metallic metasurface as a voltage gate to vary the graphene Fermi energy allows the system working point to be tuned to the desired frequency range. Another peculiar result is the achievement of a structure able to operate both in transmission and reflection with almost the same performance, but in a different frequency range of operation. The described system is hence a sub-wavelength, tunable, multifunctional, effective non-reciprocal element in the terahertz region.

Gate-Tunable Spatial Modulation of Localized Plasmon Resonances.

We demonstrate localization and field-effect spatial control of the plasmon resonance in semiconductor nanostructures, using scattering-type scanning near-field optical microscopy in the mid-infrared region. We adopt InAs nanowires embedding a graded doping profile to modulate the free carrier density along the axial direction. Our near-field measurements have a spatial resolution of 20 nm and demonstrate the presence of a local resonant feature whose position can be controlled by a back-gate bias voltage. In the present implementation, field-effect induces a modulation of the free carrier density profile yielding a spatial shift of the plasmon resonance of the order of 100 nm. We discuss the relevance of our electrically tunable nanoplasmonic architectures in view of innovative optoelectronic devices concepts.

Saturable absorption of femtosecond optical pulses in multilayer turbostratic graphene.

We investigate the nonlinear transmission of a ~280-layer turbostratic graphene sheet for near-infrared amplifier laser pulses (775 nm, Ti:sapphire laser) with a duration of 150-fs and 20-fs. Saturable absorption is observed in both cases, however it is not very strong, amounting to ~13% transmittance change for the 20-fs (150-fs) pulses at a peak intensity of 30 GW/cm2 (4 GW/cm2). The dependence on incident peak intensity is reproduced well using a theoretical model for the time-dependent saturable absorption, where the excited carriers vacate the photo-excited energy range within 3-5 fs, which we attribute to energy redistribution due to carrier-carrier scattering. This is also supported by spectrally resolved measurements for the 20-fs pulses, which show a marked dependence of the degree of saturation on the photon energy. A key result is that the shorter pulses do not yield a lower saturation fluence, due to the combined effects of the broader excitation bandwidth, and the rapid and broad energy redistribution. We also predict the potential performance of multilayer graphene samples for removing pedestal and pre-pulse structure from ultrafast high-energy pulses.

THz saturable absorption in turbostratic multilayer graphene on silicon carbide.

We investigated the room-temperature Terahertz (THz) response as saturable absorber of turbostratic multilayer graphene grown on the carbon-face of silicon carbide. By employing an open-aperture z-scan method and a 2.9 THz quantum cascade laser as source, a 10% enhancement of transparency is observed. The saturation intensity is several W/cm2, mostly attributed to the Pauli blocking effect in the intrinsic graphene layers. A visible increase of the modulation depth as a function of the number of graphene sheets was recorded as consequence of the low nonsaturable losses. The latter in turn revealed that crystalline disorder is the main limitation to larger modulations, demonstrating that the THz nonlinear absorption properties of turbostratic graphene can be engineered via a proper control of the crystalline disorder and the layers number.

Strong opto-electro-mechanical coupling in a silicon photonic crystal cavity.

We fabricate and characterize a microscale silicon opto-electromechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a silicon surface quality necessary for minimizing optical loss. Using the sensitive optical read-out of the photonic crystal cavity, we characterize the linear and nonlinear capacitive coupling to the fundamental ω(m)/2π = 63 MHz in-plane flexural motion of the structure, showing that the large electromechanical coupling in such devices may be suitable for realizing efficient microwave-to-optical signal conversion.

Active control of polariton-enabled long-range energy transfer.

Optical control is achieved on the excited state energy transfer between spatially separated donor and acceptor molecules, both coupled to the same optical mode of a cavity. The energy transfer occurs through the formed hybrid polaritons and can be switched on and off by means of ultraviolet and visible light. The control mechanism relies on a photochromic component used as donor, whose absorption and emission properties can be varied reversibly through light irradiation, whereas in-cavity hybridization with acceptors through polariton states enables a 6-fold enhancement of acceptor/donor contribution to the emission intensity with respect to a reference multilayer. These results pave the way for synthesizing effective gating systems for the transport of energy by light, relevant for light-harvesting and light-emitting devices, and for photovoltaic cells.

Room-temperature terahertz detectors based on semiconductor nanowire field-effect transistors.

The growth of semiconductor nanowires (NWs) has recently opened new paths to silicon integration of device families such as light-emitting diodes, high-efficiency photovoltaics, or high-responsivity photodetectors. It is also offering a wealth of new approaches for the development of a future generation of nanoelectronic devices. Here we demonstrate that semiconductor nanowires can also be used as building blocks for the realization of high-sensitivity terahertz detectors based on a 1D field-effect transistor configuration. In order to take advantage of the low effective mass and high mobilities achievable in III-V compounds, we have used InAs nanowires, grown by vapor-phase epitaxy, and properly doped with selenium to control the charge density and to optimize source-drain and contact resistance. The detection mechanism exploits the nonlinearity of the transfer characteristics: the terahertz radiation field is fed at the gate-source electrodes with wide band antennas, and the rectified signal is then read at the output in the form of a DC drain voltage. Significant responsivity values (>1 V/W) at 0.3 THz have been obtained with noise equivalent powers (NEP) < 2 × 10(-9) W/(Hz)(1/2) at room temperature. The large existing margins for technology improvements, the scalability to higher frequencies, and the possibility of realizing multipixel arrays, make these devices highly competitive as a future solution for terahertz detection.

Terahertz imaging for non-invasive classification of healthy and cimiciato-infected hazelnuts.

The development of new non-invasive approaches able to recognize defective food is currently a lively field of research. In particular, a simple and non-destructive method able to recognize defective hazelnuts, such as cimiciato-infected ones, in real-time is still missing. This study has been designed to detect the presence of such damaged hazelnuts. To this aim, a measurement setup based on terahertz (THz) radiation has been developed. Images of a sample of 150 hazelnuts have been acquired in the low THz range by a compact and portable active imaging system equipped with a 0.14 THz source and identified as Healthy Hazelnuts (HH) or Cimiciato Hazelnut (CH) after visual inspection. All images have been analyzed to find the average transmission of the THz radiation within the sample area. The differences in the distribution of the two populations have been used to set up a classification scheme aimed at the discrimination between healthy and injured samples. The performance of the classification scheme has been assessed through the use of the confusion matrix on 50 samples. The False Positive Rate (FPR) and True Negative Rate (TNR) are 0% and 100%, respectively. On the other hand, the True Positive Rate (TPR) and False Negative Rate (FNR) are 75% and 25%, respectively. These results are relevant from the perspective of the development of a simple, automatic, real-time method for the discrimination of cimiciato-infected hazelnuts in the processing industry.

Strain-Induced Plasmon Confinement in Polycrystalline Graphene.

Terahertz spectroscopy is a perfect tool to investigate the electronic intraband conductivity of graphene, but a phenomenological model (Drude-Smith) is often needed to describe disorder. By studying the THz response of isotropically strained polycrystalline graphene and using a fully atomistic computational approach to fit the results, we demonstrate here the connection between the Drude-Smith parameters and the microscopic behavior. Importantly, we clearly show that the strain-induced changes in the conductivity originate mainly from the increased separation between the single-crystal grains, leading to enchanced localization of the plasmon excitations. Only at the lowest strain values explored, a behavior consistent with the deformation of the individual grains can instead be observed.

Terahertz confocal microscopy with a quantum cascade laser source.

We report on the implementation of a confocal microscopy system based on a 2.9 THz quantum cascade laser source. Lateral and axial resolutions better than 70 µm and 400 µm, respectively, are achieved, with a large contrast enhancement compared to the non-confocal arrangement. The capability of resolving overlapping objects lying on different longitudinal planes is also clearly demonstrated.

Micromechanical Bolometers for Subterahertz Detection at Room Temperature.

Fast room-temperature imaging at terahertz (THz) and subterahertz (sub-THz) frequencies is an interesting technique that could unleash the full potential of plenty of applications in security, healthcare, and industrial production. In this Letter, we introduce micromechanical bolometers based on silicon nitride trampoline membranes as broad-range detectors down to sub-THz frequencies. They show, at the longest wavelengths, room-temperature noise-equivalent powers comparable to those of state-of-the-art commercial devices (∼100 pW Hz-1/2), which, along with the good operation speed and the easy, large-scale fabrication process, could make the trampoline membrane the next candidate for cheap room-temperature THz imaging and related applications.

Periodic Structural Defects in Graphene Sheets Engineered via Electron Irradiation.

Artificially-induced defects in the lattice of graphene are a powerful tool for engineering the properties of the crystal, especially if organized in highly-ordered structures such as periodic arrays. A method to deterministically induce defects in graphene is to irradiate the crystal with low-energy (<20 keV) electrons delivered by a scanning electron microscope. However, the nanometric precision granted by the focused beam can be hindered by the pattern irradiation itself due to the small lateral separation among the elements, which can prevent the generation of sharp features. An accurate analysis of the achievable resolution is thus essential for practical applications. To this end, we investigated patterns generated by low-energy electron irradiation combining atomic force microscopy and micro-Raman spectroscopy measurements. We proved that it is possible to create well-defined periodic patterns with precision of a few tens of nanometers. We found that the defected lines are influenced by electrons back-scattered by the substrate, which limit the achievable resolution. We provided a model that takes into account such substrate effects. The findings of our study allow the design and easily accessible fabrication of graphene devices featuring complex defect engineering, with a remarkable impact on technologies exploiting the increased surface reactivity.

Unexpected Electron Transport Suppression in a Heterostructured Graphene-MoS2 Multiple Field-Effect Transistor Architecture.

We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors (FETs), and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with those of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition. The heterojunction was investigated by scanning Raman and photoluminescence spectroscopies. Moreover, transconductance curves of MoS2 are compared with the current-voltage characteristics of graphene contact stripes, revealing a significant suppression of transport on the n-side of the transconductance curve. On the basis of ab initio modeling, the effect is understood in terms of trapping by sulfur vacancies, which counterintuitively depends on the field effect, even though the graphene contact layer is positioned between the backgate and the MoS2 channel.

High efficiency coupling of Terahertz micro-ring quantum cascade lasers to the low-loss optical modes of hollow metallic waveguides.

We demonstrate that azimuthally polarized surface emitting Terahertz quantum cascade lasers fabricated in a micro-ring resonator geometry can be coupled to cylindrical hollow aluminum waveguides reaching efficiencies as high ≈98%, when a collimating lens is used. By placing the waveguide in close contact with the QCL in a simple back-to-back geometry, the laser mode can be perfectly matched with the low loss TE(01) waveguide mode showing attenuation losses as low as ≈2.3-2.7 dB/m at 3.2 THz.