Principles for computational design of binding antibodies.

Natural proteins must both fold into a stable conformation and exert their molecular function. To date, computational design has successfully produced stable and atomically accurate proteins by using so-called "ideal" folds rich in regular secondary structures and almost devoid of loops and destabilizing elements, such as cavities. Molecular function, such as binding and catalysis, however, often demands nonideal features, including large and irregular loops and buried polar interaction networks, which have remained challenging for fold design. Through five design/experiment cycles, we learned principles for designing stable and functional antibody variable fragments (Fvs). Specifically, we (i) used sequence-design constraints derived from antibody multiple-sequence alignments, and (ii) during backbone design, maintained stabilizing interactions observed in natural antibodies between the framework and loops of complementarity-determining regions (CDRs) 1 and 2. Designed Fvs bound their ligands with midnanomolar affinities and were as stable as natural antibodies, despite having >30 mutations from mammalian antibody germlines. Furthermore, crystallographic analysis demonstrated atomic accuracy throughout the framework and in four of six CDRs in one design and atomic accuracy in the entire Fv in another. The principles we learned are general, and can be implemented to design other nonideal folds, generating stable, specific, and precise antibodies and enzymes.

AbDesign: An algorithm for combinatorial backbone design guided by natural conformations and sequences.

Computational design of protein function has made substantial progress, generating new enzymes, binders, inhibitors, and nanomaterials not previously seen in nature. However, the ability to design new protein backbones for function--essential to exert control over all polypeptide degrees of freedom--remains a critical challenge. Most previous attempts to design new backbones computed the mainchain from scratch. Here, instead, we describe a combinatorial backbone and sequence optimization algorithm called AbDesign, which leverages the large number of sequences and experimentally determined molecular structures of antibodies to construct new antibody models, dock them against target surfaces and optimize their sequence and backbone conformation for high stability and binding affinity. We used the algorithm to produce antibody designs that target the same molecular surfaces as nine natural, high-affinity antibodies; in five cases interface sequence identity is above 30%, and in four of those the backbone conformation at the core of the antibody binding surface is within 1 Å root-mean square deviation from the natural antibodies. Designs recapitulate polar interaction networks observed in natural complexes, and amino acid sidechain rigidity at the designed binding surface, which is likely important for affinity and specificity, is high compared to previous design studies. In designed anti-lysozyme antibodies, complementarity-determining regions (CDRs) at the periphery of the interface, such as L1 and H2, show greater backbone conformation diversity than the CDRs at the core of the interface, and increase the binding surface area compared to the natural antibody, potentially enhancing affinity and specificity.

Algorithm discovery by protein folding game players.

Foldit is a multiplayer online game in which players collaborate and compete to create accurate protein structure models. For specific hard problems, Foldit player solutions can in some cases outperform state-of-the-art computational methods. However, very little is known about how collaborative gameplay produces these results and whether Foldit player strategies can be formalized and structured so that they can be used by computers. To determine whether high performing player strategies could be collectively codified, we augmented the Foldit gameplay mechanics with tools for players to encode their folding strategies as "recipes" and to share their recipes with other players, who are able to further modify and redistribute them. Here we describe the rapid social evolution of player-developed folding algorithms that took place in the year following the introduction of these tools. Players developed over 5,400 different recipes, both by creating new algorithms and by modifying and recombining successful recipes developed by other players. The most successful recipes rapidly spread through the Foldit player population, and two of the recipes became particularly dominant. Examination of the algorithms encoded in these two recipes revealed a striking similarity to an unpublished algorithm developed by scientists over the same period. Benchmark calculations show that the new algorithm independently discovered by scientists and by Foldit players outperforms previously published methods. Thus, online scientific game frameworks have the potential not only to solve hard scientific problems, but also to discover and formalize effective new strategies and algorithms.

Efficient sampling of protein conformational space using fast loop building and batch minimization on highly parallel computers.

All-atom sampling is a critical and compute-intensive end stage to protein structural modeling. Because of the vast size and extreme ruggedness of conformational space, even close to the native structure, the high-resolution sampling problem is almost as difficult as predicting the rough fold of a protein. Here, we present a combination of new algorithms that considerably speed up the exploration of very rugged conformational landscapes and are capable of finding heretofore hidden low-energy states. The algorithm is based on a hierarchical workflow and can be parallelized on supercomputers with up to 128,000 compute cores with near perfect efficiency. Such scaling behavior is notable, as with Moore's law continuing only in the number of cores per chip, parallelizability is a critical property of new algorithms. Using the enhanced sampling power, we have uncovered previously invisible deficiencies in the Rosetta force field and created an extensive decoy training set for optimizing and testing force fields.

Structure prediction for CASP7 targets using extensive all-atom refinement with Rosetta@home.

We describe predictions made using the Rosetta structure prediction methodology for both template-based modeling and free modeling categories in the Seventh Critical Assessment of Techniques for Protein Structure Prediction. For the first time, aggressive sampling and all-atom refinement could be carried out for the majority of targets, an advance enabled by the Rosetta@home distributed computing network. Template-based modeling predictions using an iterative refinement algorithm improved over the best existing templates for the majority of proteins with less than 200 residues. Free modeling methods gave near-atomic accuracy predictions for several targets under 100 residues from all secondary structure classes. These results indicate that refinement with an all-atom energy function, although computationally expensive, is a powerful method for obtaining accurate structure predictions.

Absolute free-energy calculations of liquids using a harmonic reference state.

Absolute free-energy methods provide a potential solution to the overlap problem in free-energy calculations. In this paper, we report an extension of the previously published confinement method (J. Phys. Chem. B 2006, 110, 17212-20) to fluid simulations. Absolute free energies of liquid argon and liquid water are obtained accurately and compared with results from thermodynamic integration. The method works by transforming the liquid state into a harmonic, solid reference state. This is achieved using a special restraint potential that allows molecules to change their restraint position during the simulation, which circumvents the need for the molecules to sample the full extent of their translational freedom. The absolute free energy of the completely restrained reference state is obtained from a normal mode calculation. Because of the generic reference state used, the method is applicable to nonhomogeneous, diffusive systems and could provide an alternative method in situations in which solute annihilation fails due to the size of the solute. Potential applications include calculation of solvation energies of large molecules and free energies of peptide conformational changes in explicit solvent.

An efficient, path-independent method for free-energy calculations.

Classical free-energy methods depend on the definition of physical or nonphysical integration paths to calculate free-energy differences between states. This procedure can be problematic and computationally expensive when the states of interest do not overlap and are far apart in phase space. Here we introduce a novel method to calculate free-energy differences that is path-independent by transforming each end state into a reference state in which the vibrational entropy is the sole component of the total entropy, thus allowing direct computation of the relative free energy. We apply the method to calculate side-chain entropies of a beta-hairpin-forming peptide in a variety of backbone conformations, demonstrating its importance in determining structural propensities. We find that low-free-energy conformations achieve their stability through optimal trade off between enthalpic gains due to favorable interatomic interactions and entropic losses incurred by the same.

Combined covalent-electrostatic model of hydrogen bonding improves structure prediction with Rosetta.

Interactions between polar atoms are challenging to model because at very short ranges they form hydrogen bonds (H-bonds) that are partially covalent in character and exhibit strong orientation preferences; at longer ranges the orientation preferences are lost, but significant electrostatic interactions between charged and partially charged atoms remain. To simultaneously model these two types of behavior, we refined an orientation dependent model of hydrogen bonds [Kortemme et al. J. Mol. Biol. 2003, 326, 1239] used by the molecular modeling program Rosetta and then combined it with a distance-dependent Coulomb model of electrostatics. The functional form of the H-bond potential is physically motivated and parameters are fit so that H-bond geometries that Rosetta generates closely resemble H-bond geometries in high-resolution crystal structures. The combined potentials improve performance in a variety of scientific benchmarks including decoy discrimination, side chain prediction, and native sequence recovery in protein design simulations and establishes a new standard energy function for Rosetta.

Relaxation of backbone bond geometry improves protein energy landscape modeling.

A key issue in macromolecular structure modeling is the granularity of the molecular representation. A fine-grained representation can approximate the actual structure more accurately, but may require many more degrees of freedom than a coarse-grained representation and hence make conformational search more challenging. We investigate this tradeoff between the accuracy and the size of protein conformational search space for two frequently used representations: one with fixed bond angles and lengths and one that has full flexibility. We performed large-scale explorations of the energy landscapes of 82 protein domains under each model, and find that the introduction of bond angle flexibility significantly increases the average energy gap between native and non-native structures. We also find that incorporating bonded geometry flexibility improves low resolution X-ray crystallographic refinement. These results suggest that backbone bond angle relaxation makes an important contribution to native structure energetics, that current energy functions are sufficiently accurate to capture the energetic gain associated with subtle deformations from chain ideality, and more speculatively, that backbone geometry distortions occur late in protein folding to optimize packing in the native state.

Alternate states of proteins revealed by detailed energy landscape mapping.

What conformations do protein molecules populate in solution? Crystallography provides a high-resolution description of protein structure in the crystal environment, while NMR describes structure in solution but using less data. NMR structures display more variability, but is this because crystal contacts are absent or because of fewer data constraints? Here we report unexpected insight into this issue obtained through analysis of detailed protein energy landscapes generated by large-scale, native-enhanced sampling of conformational space with Rosetta@home for 111 protein domains. In the absence of tightly associating binding partners or ligands, the lowest-energy Rosetta models were nearly all <2.5 Å C(α)RMSD from the experimental structure; this result demonstrates that structure prediction accuracy for globular proteins is limited mainly by the ability to sample close to the native structure. While the lowest-energy models are similar to deposited structures, they are not identical; the largest deviations are most often in regions involved in ligand, quaternary, or crystal contacts. For ligand binding proteins, the low energy models may resemble the apo structures, and for oligomeric proteins, the monomeric assembly intermediates. The deviations between the low energy models and crystal structures largely disappear when landscapes are computed in the context of the crystal lattice or multimer. The computed low-energy ensembles, with tight crystal-structure-like packing in the core, but more NMR-structure-like variability in loops, may in some cases resemble the native state ensembles of proteins better than individual crystal or NMR structures, and can suggest experimentally testable hypotheses relating alternative states and structural heterogeneity to function.

Refinement of protein structures into low-resolution density maps using rosetta.

We describe a method based on Rosetta structure refinement for generating high-resolution, all-atom protein models from electron cryomicroscopy density maps. A local measure of the fit of a model to the density is used to directly guide structure refinement and to identify regions incompatible with the density that are then targeted for extensive rebuilding. Over a range of test cases using both simulated and experimentally generated data, the method consistently increases the accuracy of starting models generated either by comparative modeling or by hand-tracing the density. The method can achieve near-atomic resolution starting from density maps at 4-6 A resolution.