Detecting Molecular Rotational Dynamics Complementing the Low-Frequency Terahertz Vibrations in a Zirconium-Based Metal-Organic Framework.

We show clear experimental evidence of cooperative terahertz (THz) dynamics observed below 3 THz (∼100 cm^{-1}), for a low-symmetry Zr-based metal-organic framework structure, termed MIL-140A [ZrO(O_{2}C-C_{6}H_{4}-CO_{2})]. Utilizing a combination of high-resolution inelastic neutron scattering and synchrotron radiation far-infrared spectroscopy, we measured low-energy vibrations originating from the hindered rotations of organic linkers, whose energy barriers and detailed dynamics have been elucidated via ab initio density functional theory calculations. The complex pore architecture caused by the THz rotations has been characterized. We discovered an array of soft modes with trampolinelike motions, which could potentially be the source of anomalous mechanical phenomena such as negative thermal expansion. Our results demonstrate coordinated shear dynamics (2.47 THz), a mechanism which we have shown to destabilize the framework structure, in the exact crystallographic direction of the minimum shear modulus (G_{min}).

Adsorptive desulfurization with CPO-27/MOF-74: an experimental and computational investigation.

By combining experimental adsorption isotherms, microcalorimetric data, infrared spectroscopy and quantum chemical calculations the adsorption behaviour of the CPO-27/MOF-74 series (Ni, Co, Mg, Cu, and Zn) in the desulfurization of fuels is evaluated. The results show a clear influence of the metal ion on the adsorption capacity and affinity for S-heterocyclic compounds, with CPO-27(Ni) being the best performing material both in terms of capacity and affinity. The microcalorimetric data and infrared spectroscopy confirm the high affinity of CPO-27(Ni) for thiophene and similar compounds, while the computational data reveal that the origin of this outstanding adsorption performance is the strong sulfur-metal interaction.

Adsorptive separation on metal-organic frameworks in the liquid phase.

While much attention of the MOF community has been devoted to adsorption and purification of gases, there is now also a vast body of data on the capability of MOFs to separate and purify liquid mixtures. Initial studies focused on separation of petrochemicals in apolar backgrounds, but the attention has moved now to the separation of complex, e.g. chiral compounds, and to the isolation of biobased compounds from aqueous media. We here give an overview of most of the existing literature, with an accent on separation mechanisms and structure-selectivity relationships.

The structure of the aluminum fumarate metal-organic framework A520.

The synthesis of the commercially available aluminum fumarate sample A520 has been optimized and its structure analyzed through a combination of powder diffraction, solid-state NMR spectroscopy, molecular simulation, IR spectroscopy, and thermal analysis. A520 is an analogue of the MIL-53(Al)-BDC solid, but with a more rigid behavior. The differences between the commercial and the optimized samples in terms of defects have been investigated by in situ IR spectroscopy and correlated to their catalytic activity for ethanol dehydration.

N/S-heterocyclic contaminant removal from fuels by the mesoporous metal-organic framework MIL-100: the role of the metal ion.

The influence of the metal ion in the mesoporous metal trimesate MIL-100(Al(3+), Cr(3+), Fe(3+), V(3+)) on the adsorptive removal of N/S-heterocyclic molecules from fuels has been investigated by combining isotherms for adsorption from a model fuel solution with microcalorimetric and IR spectroscopic characterizations. The results show a clear influence of the different metals (Al, Fe, Cr, V) on the affinity for the heterocyclic compounds, on the integral adsorption enthalpies, and on the uptake capacities. Among several factors, the availability of coordinatively unsaturated sites and the presence of basic sites next to the coordinative vacancies are important factors contributing to the observed affinity differences for N-heterocyclic compounds. These trends were deduced from IR spectroscopic observation of adsorbed indole molecules, which can be chemisorbed coordinatively or by formation of hydrogen bonded species. On the basis of our results we are able to propose an optimized adsorbent for the deep and selective removal of nitrogen contaminants out of fuel feeds, namely MIL-100(V).

Synthesis modulation as a tool to increase the catalytic activity of metal-organic frameworks: the unique case of UiO-66(Zr).

The catalytic activity of the zirconium terephthalate UiO-66(Zr) can be drastically increased by using a modulation approach. The combined use of trifluoroacetic acid and HCl during the synthesis results in a highly crystalline material, with partial substitution of terephthalates by trifluoroacetate. Thermal activation of the material leads not only to dehydroxylation of the hexanuclear Zr cluster but also to post-synthetic removal of the trifluoroacetate groups, resulting in a more open framework with a large number of open sites. Consequently, the material is a highly active catalyst for several Lewis acid catalyzed reactions.

Adsorption of N/S heterocycles in the flexible metal-organic framework MIL-53(Fe(III)) studied by in situ energy dispersive X-ray diffraction.

The adsorption of N/S-containing heterocyclic organic molecules in the flexible iron(III) terephthalate MIL-53, Fe(III)(OH)(0.6)F(0.4)(O2C-C6H4-CO2)·(H2O), from the liquid phase was studied with in situ energy dispersive X-ray diffraction (EDXRD), in order to follow the adsorption-induced expansion of the structure. For comparison with the diffraction data, liquid phase adsorption isotherms were recorded for uptake of benzothiophene, benzothiazole and indole in isopropanol and in heptane. The solvent not only influences pore opening but is also a competing guest. The in situ EDXRD experiments allow the kinetics of guest uptake and the competition with solvent to be monitored directly. Indole uptake is limited; this adsorbate is barely capable of opening the closed, either hydrated or dehydrated, MIL-53(Fe) structure, or of penetrating the isopropanol-containing material in the concentration range under study. When isopropanol is used as a solvent, the guest molecules benzothiophene and benzothiazole must be present at a certain threshold concentration before substantial adsorption into the metal-organic framework takes place, eventually resulting in full opening of the structure. The fully expanded structures of benzothiophene or benzothiazole loaded MIL-53(Fe) materials have Imcm symmetry and a unit cell volume of ca. 1600 Å(3), and upon uptake of the guest molecules by the closed form (unit cell volume ~1000 Å(3)) no intermediate crystalline phases are seen. Successful uptake by MIL-53(Fe) requires that the adsorbate is primarily a good hydrogen bond acceptor; additionally, based on UV-visible spectroscopy, a charge-transfer interaction between the S atoms of benzothiophene and the aromatic rings in the MOF pore wall is proposed.

Electronic effects of linker substitution on Lewis acid catalysis with metal-organic frameworks.

Functionalized linkers can greatly increase the activity of metal-organic framework (MOF) catalysts with coordinatively unsaturated sites. A clear linear free-energy relationship (LFER) was found between Hammett σ(m) values of the linker substituents X and the rate k(X) of a carbonyl-ene reaction. This is the first LFER ever observed for MOF catalysts. A 56-fold increase in rate was found when the substituent is a nitro group.

Adsorption and Selective Recovery of Citric Acid with Poly(4-vinylpyridine).

Citric acid (CA) is an important organic acid that is produced on a large scale by fermentation. Current methods to recover CA from the fermentation broth require large amounts of chemicals and produce considerable amounts of waste, while not all CA can be recovered. The use of adsorbents can increase the degree of product recovery and reduce chemical consumption and waste generation. In this work, poly(4-vinylpyridine) (PVP) is evaluated as an adsorbent for CA recovery. It has a high adsorption capacity (>30 wt %) at low pH and a high selectivity for CA at moderate pH in the presence of sulfate anions, two conditions that are frequently encountered during CA recovery. PVP could be efficiently regenerated after adsorption using simple alcohols like methanol and ethanol. Considering selectivity and regeneration, PVP distinctly outperforms more common adsorbents for organic acids, including commercial strongly and weakly basic anion exchangers. The desirable adsorptive features of PVP for CA can be attributed to the low basicity of the pyridine group.

Strategies for Enhancing the Catalytic Performance of Metal-Organic Frameworks in the Fixation of CO2 into Cyclic Carbonates.

Metal-organic frameworks (MOFs) with accessible Lewis acid sites are finding increasing application in the field of heterogeneous catalysis. However, the structural instability of MOFs when they are exposed to high temperature and/or high pressure often limits their applicability. In this study, two strategies were applied to achieve a MOF catalyst with high stability, activity and selectivity in the reaction of CO2 with styrene oxide to produce styrene carbonate. In the first approach, a MOF with linkers with high connectivity as MIL-100(Cr) was studied, leading to promising activity and recyclability in consecutive catalytic runs without loss of activity. In the second strategy, a MOF with linkers with lower connectivity but with encapsulated Keggin phosphotungstic acid (MIL-101(Cr)[PTA]) was prepared. However, the activity of this catalyst decreased upon reuse as a consequence of deterioration of the MOF. Further investigations were dedicated to the enhancement of the catalytic performance of MIL-100 and included the variation of the metal centre as well as the type and loading of organic salt acting as nucleophile source. This allowed tuning the nature of the organic halide to the specific porous structure of MIL-100(Cr) to prevent diffusion limitations. The best catalytic performance was obtained for MIL-100(Cr) in combination with EMIMBr ionic liquid, which gave very high styrene carbonate yield (94 %) with complete selectivity after 18 h of reaction at mild temperature (60 °C).

Adsorption and Reactive Desorption on Metal-Organic Frameworks: A Direct Strategy for Lactic Acid Recovery.

Biomass-derived lactic acid (LA) is an important platform chemical towards the sustainable production of numerous materials. However, the fermentation process currently in use is limited by the difficult recovery of the LA product from the fermentation broth and results in the generation of stoichiometric amounts of gypsum waste. Herein, we show that metal-organic frameworks (MOFs) of the UiO-66(Zr) type are effective adsorbents for the separation of LA from aqueous (buffer) solutions. These frameworks based on zirconium clusters and terephthalic acid derivatives display a tremendous uptake (up to 42 wt %) and a high affinity for LA. The latter can further be tuned by changing the hydrogen-bonding properties of the functional groups present on the organic ligand. A Rietveld refinement disclosed the specific interaction of LA with the clusters of UiO-66(Zr) and a preferential adsorption on open zirconium sites. Taking advantage of the catalytic activity of UiO-66(Zr), desorption of LA was performed in alcohols to recover up to 73 % as ester. Applied to the recovery of LA, adsorption and reactive desorption offer a direct and gypsum-free strategy as an alternative for the current multi-step process.

Isolation of Renewable Phenolics by Adsorption on Ultrastable Hydrophobic MIL-140 Metal-Organic Frameworks.

The isolation and separation of phenolic compounds from aqueous backgrounds is challenging and will gain in importance as we become more dependent on phenolics from lignocellulose-derived bio-oil to meet our needs for aromatic compounds. Herein, we show that highly stable and hydrophobic Zr metal-organic frameworks of the MIL-140 type are effective adsorbent materials for the separation of different phenolics and far outperform other classes of porous solids (silica, zeolites, carbons). The mechanism of the hydroquinone-catechol separation on MIL-140C was studied in detail by combining experimental results with computational techniques. Although the differences in adsorption enthalpy between catechol and hydroquinone are negligible, the selective uptake of catechol in MIL-140C is explained by its dense π-π stacking in the pores. The interplay of enthalpic and entropic effects allowed separation of a complex, five-compound phenol mixture through breakthrough over a MIL-140C column. Unlike many other metal-organic frameworks, MIL-140C is remarkably stable and maintained structure, porosity and performance after five adsorption-desorption cycles.