Design and Demonstration of Tunable Amplified Sensitivity of AlGaN/GaN High Electron Mobility Transistor (HEMT)-Based Biosensors in Human Serum.

We have developed a swift and simplistic protein immunoassay using aptamer functionalized AlGaN/GaN high electron mobility transistors (HEMTs). The unique design of the sensor facilitates protein detection in a physiological salt environment overcoming charge screening effects, without requiring sample preprocessing. This study reports a tunable and amplified sensitivity of solution-gated electric double layer (EDL) HEMT-based biosensors, which demonstrates significantly enhanced sensitivity by designing a smaller gap between the gate electrode and the detection, and by operating at higher gate voltage. Sensitivity is calculated by quantifying NT-proBNP, a clinical biomarker of heart failure, in buffer and untreated human serum samples. The biosensor depicts elevated sensitivity and high selectivity. Furthermore, detailed investigation of the amplified sensitivity in an increased ionic strength environment is conducted, and it is revealed that a high sensitivity of 80.54 mV/decade protein concentration can be achieved, which is much higher than that of previously reported FET biosensors. This sensor technology demonstrates immense potential in developing surface affinity sensors for clinical diagnostics.

Instant Mercury Ion Detection in Industrial Waste Water with a Microchip Using Extended Gate Field-Effect Transistors and a Portable Device.

Mercury ion selective membrane (Hg-ISM) coated extended gate Field Effect transistors (ISM-FET) were used to manifest a novel methodology for ion-selective sensors based on FET's, creating ultra-high sensitivity (-36 mV/log [Hg2+]) and outweighing ideal Nernst sensitivity limit (-29.58 mV/log [Hg2+]) for mercury ion. This highly enhanced sensitivity compared with the ion-selective electrode (ISE) (10-7 M) has reduced the limit of detection (10-13 M) of Hg2+ concentration's magnitude to considerable orders irrespective of the pH of the test solution. Systematical investigation was carried out by modulating sensor design and bias voltage, revealing that higher sensitivity and a lower detection limit can be attained in an adequately stronger electric field. Our sensor has a limit of detection of 10-13 M which is two orders lower than Inductively Coupled Plasma Mass Spectrometry (ICP-MS), having a limit of detection of 10-11 M. The sensitivity and detection limit do not have axiomatic changes under the presence of high concentrations of interfering ions. The technology offers economic and consumer friendly water quality monitoring options intended for homes, offices and industries.

Investigation of Electrical Stability and Sensitivity of Electric Double Layer Gated Field-Effect Transistors (FETs) for miRNA Detection.

In this research, we developed a miRNA sensor using an electrical double layer (EDL) gated field-effect transistor (FET)-based biosensor with enhanced sensitivity and stability. We conducted an in-depth investigation of the mechanisms that give rise to fluctuations in the electrical signal, affecting the stability and sensitivity of the miRNA sensor. Firstly, surface characteristics were studied by examining the metal electrodes deposited using different metal deposition techniques. The lower surface roughness of the gold electrode improved the electrical current stability. The temperature and viscosity of the sample solution were proven to affect the electrical stability, which was attributed to reducing the effect of Brownian motion. Therefore, by controlling the test conditions, such as temperature and sample viscosity, and the surface characteristics of the metal electrodes, we can enhance the stability of the sensor. Metal electrodes deposited via sputtering and e-beam evaporator yielded the lowest signal fluctuation. When ambient temperature was reduced to 3 °C, the sensor had better noise characteristics compared to room temperature testing. Higher viscosity of samples resulted in lower signal fluctuations. Lastly, surface functionalization was demonstrated to be a critical factor in enhancing the stability and sensitivity. MiRNA sensors with higher surface ratios of immobilized DNA probes performed with higher sensitivity and stability. This study reveals methods to improve the characteristics of EDL FET biosensors to facilitate practical implementation in clinical applications.

Single Drop Whole Blood Diagnostics: Portable Biomedical Sensor for Cardiac Troponin I Detection.

Detection of disease biomarkers from whole blood is very important in disease prevention and management. However, new generation assays like point-of-care or mobile diagnostics face a myriad of challenges in detecting proteins from whole blood. In this research, we have designed, fabricated, and characterized a portable biomedical sensor for the detection of cardiac troponin I (cTnI) directly from whole blood, without sample pretreatments. The sensing methodology is based on an extended gate electrical double layer (EDL) gated field effect transistor (FET) biosensor that can offer very high sensitivity, a wide dynamic range, and high selectivity to target analyte. The sensing methodology is not impeded by electrostatic screening and can be applied to all types of FET sensors. A portable biomedical system is designed to carry out the diagnostic assay in a very simple and rapid manner, that allows the user to screen for target protein from a single drop of blood, in 5 min. This biomedical sensor can be used in hospitals and homes alike, for early detection of cTnI which is a clinical marker for acute myocardial infarction. This sensing methodology could potentially revolutionize the modern health care industry.

Highly sensitive FET sensors for cadmium detection in one drop of human serum with a hand-held device and investigation of the sensing mechanism.

As the heavy metal contamination is becoming worse, monitoring the heavy metal content in water or human body gets more and more important. In this research, a cadmium ion-selective field effect transistor (Cd-ISFET) for rapidly detecting cadmium ions has been developed and the mechanism of the sensor is also investigated in depth. Our Cd-ISFET sensor exhibits high sensitivity beyond the ideal Nernst sensitivity, wide dynamic range, low detection limit (∼10-11M), which is comparable with inductively coupled plasma mass spectrometry, and easy operation enabling people to detect cadmium ion by themselves. From the analysis of electrical measurement results, this Cd-ISFET is preferred to operate at the bias with the maximum transconductance of the FET to enhance the sensor signal. The AC impedance measurement is carried out to directly investigate the mechanism of an ion-selective membrane (ISM). From impedance results, the real part of the total impedance, which is the resistance, was shown to dominate the sensor signal. The potential drop across the ISM is caused by the heavy metal ion in the membrane, which is employed to the gate of the FET via an extended gate electrode. Cadmium ion detection in one drop of human serum with this sensor was demonstrated. This cost-effective and highly sensitive sensor is promising and can be used by anyone and anywhere to prevent people from cadmium poisoning.

Risk stratification of heart failure from one drop of blood using hand-held biosensor for BNP detection.

Continued risk assessment by evaluating cardiac biomarkers in healthy and unhealthy individuals can lower the mortality rate of cardiovascular diseases (CVDs). In this research, we have developed a hand-held biosensor system to rapidly screen for brain natriuretic peptide (BNP) from a single drop of whole blood. The sensor methodology is based on extended gate design of electrical double layer (EDL) field effect transistor (FET), that can directly detect BNP in whole blood, without extensive sample pre-treatments, thereby eliminating the limitations of charge screening in high ionic strength solutions. A simple sensor array chip is fabricated to integrate with the MOSFET sensor system. Sensing characteristics are elucidated using purified BNP samples in 1 × PBS (with 4% BSA), spiked BNP samples in whole blood and clinical whole blood samples. The blood cells can be gravitationally separated without the use of any external actuation. The sensor exhibits very high sensitivity over wide dynamic range of detection. The sensing characteristics are not adversely affected by the presence of background proteins or blood cells, even without gravitational blood cell separation. Thus, the biosensor system can allow users to perform rapid whole blood diagnostics with minimal user protocols, in 5 min. The features of high sensitivity, cost-effectiveness and convenience of usage empower this technology to revolutionize the mobile diagnostics and healthcare industry.