Visible and short-wavelength infrared light collimation through carbon nanotube, parallel-hole collimators.

Traditional collimators typically require large optics and/or long pathlengths which makes miniaturization difficult. Carbon nanotube templated microfabrication offers a solution to pattern small 3D structures, such as parallel hole collimators. Here we present the characterization of a carbon nanotube parallel hole collimator design and its efficacy in visible and short wavelength infrared light. Comparison to geometric and far field diffraction models are shown to give a close fit, making this a promising technology for miniaturized diffuse light collimation.

Impact of Polymer-Constrained Annealing on the Properties of DNA Origami-Templated Gold Nanowires.

DNA origami-templated fabrication enables bottom-up fabrication of nanoscale structures from a variety of functional materials, including metal nanowires. We studied the impact of low-temperature annealing on the morphology and conductance of DNA-templated nanowires. Nanowires were formed by selective seeding of gold nanorods on DNA origami and gold electroless plating of the seeded structures. At low annealing temperatures (160 °C for seeded-only and 180 °C for plated), the wires broke up and separated into multiple, isolated islands. Through the use of polymer-constrained annealing, the island formation in plated wires was suppressed up to annealing temperatures of 210 °C. Four-point electrical measurements showed that the wires remained conductive after a polymer-constrained annealing at 200 °C.

Seeding, Plating and Electrical Characterization of Gold Nanowires Formed on Self-Assembled DNA Nanotubes.

Self-assembly nanofabrication is increasingly appealing in complex nanostructures, as it requires fewer materials and has potential to reduce feature sizes. The use of DNA to control nanoscale and microscale features is promising but not fully developed. In this work, we study self-assembled DNA nanotubes to fabricate gold nanowires for use as interconnects in future nanoelectronic devices. We evaluate two approaches for seeding, gold and palladium, both using gold electroless plating to connect the seeds. These gold nanowires are characterized electrically utilizing electron beam induced deposition of tungsten and four-point probe techniques. Measured resistivity values for 15 successfully studied wires are between 9.3 × 10-6 and 1.2 × 10-3 Ωm. Our work yields new insights into reproducible formation and characterization of metal nanowires on DNA nanotubes, making them promising templates for future nanowires in complex electronic circuitry.

Four-Point Probe Electrical Measurements on Templated Gold Nanowires Formed on Single DNA Origami Tiles.

Bottom-up nanofabrication is increasingly making use of self-assembled DNA to fabricate nanowires and potential integrated circuits, although yields of such electronic nanostructures are inadequate, as is the ability to reliably make electrical measurements on them. In this paper, we report improved yields and unprecedented conductivity measurements for Au nanowires created on DNA origami tile substrates. We created several different self-assembled Au nanowire arrangements on DNA origami tiles that are approximately 70 nm × 90 nm, through anisotropic growth of Au nanorods attached to specific sites. Modifications to the tile design increased yields of the final desired nanostructures as much as 6-fold. In addition, we measured the conductivity of Au nanowires created on these DNA tiles (∼130 nm long, 10 nm diameter, and 40 nm spacing between measurement points) with a four-point measurement technique that utilized electron beam induced metal deposition to form probe electrodes. These nanowires formed on single DNA origami tiles were electrically conductive, having resistivities as low as 4.24 × 10-5 Ω m. This work demonstrates the creation and measurement of inorganic nanowires on single DNA origami tiles as a promising path toward future bottom-up fabrication of nanoelectronics.

Anisotropic Electroless Deposition on DNA Origami Templates To Form Small Diameter Conductive Nanowires.

An improved method for the metallization of DNA origami is examined in this work. DNA origami, a simple and robust method for creating a wide variety of nanostructured shapes and patterns, provides an enabling template for bottom-up fabrication of next-generation nanodevices. Selective metallization of these DNA templates is needed to make nanoelectronic devices. Here, we demonstrate a metallization process that uses gold nanorod seeds followed by anisotropic plating to provide improved morphology and greater control of the final metallized width of the structure. In our approach, gold nanorods are attached to an origami template to create a seed layer. Electroless gold deposition is then used to fill the gaps between seeds in order to create continuous, conductive nanowires. Importantly, growth during electroless deposition occurs preferentially in the length direction at a rate that is approximately 4 times the growth rate in the width direction, which enables fabrication of narrow, continuous wires. The electrical properties of 49 nanowires with widths ranging from 13 to 29 nm were characterized, and resistivity values as low as 8.9 × 10-7 Ω·m were measured. The anisotropic metallization process presented here represents important progress toward the creation of nanoelectronic devices by molecularly directed placement of functional components onto self-assembled biological templates.

Bottom-Up Fabrication of DNA-Templated Electronic Nanomaterials and Their Characterization.

Bottom-up fabrication using DNA is a promising approach for the creation of nanoarchitectures. Accordingly, nanomaterials with specific electronic, photonic, or other functions are precisely and programmably positioned on DNA nanostructures from a disordered collection of smaller parts. These self-assembled structures offer significant potential in many domains such as sensing, drug delivery, and electronic device manufacturing. This review describes recent progress in organizing nanoscale morphologies of metals, semiconductors, and carbon nanotubes using DNA templates. We describe common substrates, DNA templates, seeding, plating, nanomaterial placement, and methods for structural and electrical characterization. Finally, our outlook for DNA-enabled bottom-up nanofabrication of materials is presented.

Synthesis and characterization of potassium metal/graphitic carbon nanofiber intercalates.

Direct reaction of herringbone, platelet, or narrow, tubular herringbone graphitic carbon nanofibers (GCNFs) with molten potassium gives K/GCNF intercalates with stoichiometric control of potassium loading. Intercalate formation is confirmed by powder X-ray diffraction and micro-Raman spectroscopy. K/GCNF intercalates act as radical-anion alkene polymerization catalysts and reduce water with stoichiometric formation of hydrogen gas. Stage-1 K/narrow, tubular GCNF intercalate exhibits thermionic emission at 300 degrees C. Stage-1 K/herringbone GCNF intercalate is an excellent thermionic emitter having high thermal stability up to 1000 degrees C. K/GCNF intercalates have much reduced work functions of ca. 2.2 eV with localized emission showing a work function of 1.6 eV.

Rapid Analysis of Inorganic Species in Herbaceous Materials Using Laser-Induced Breakdown Spectroscopy.

Inorganic compounds in biomass, often referred to as ash, are known to be problematic in the thermochemical conversion of biomass to bio-oil or syngas and, ultimately, hydrocarbon fuels because they negatively influence reaction pathways, contribute to fouling and corrosion, poison catalysts, and impact waste streams. The most common ash-analysis methods, such as inductively coupled plasma-optical emission spectrometry/mass spectrometry (ICP-OES/MS), require considerable time and expensive reagents. Laser-induced breakdown spectroscopy (LIBS) is emerging as a technique for rapid analysis of the inorganic constituents in a wide range of biomass materials. This study compares analytical results using LIBS data to results obtained from three separate ICP-OES/MS methods for 12 samples, including six standard reference materials. Analyzed elements include aluminum, calcium, iron, magnesium, manganese, phosphorus, potassium, sodium, and silicon, and results show that concentrations can be measured with an uncertainty of approximately 100 parts per million using univariate calibration models and relatively few calibration samples. These results indicate that the accuracy of LIBS is comparable to that of ICP-OES methods and indicate that some acid-digestion methods for ICP-OES may not be reliable for Na and Al. These results also demonstrate that germanium can be used as an internal standard to improve the reliability and accuracy of measuring many elements of interest, and that LIBS can be used for rapid determination of total ash in biomass samples. Key benefits of LIBS include little sample preparation, no reagent consumption, and the generation of meaningful analytical data instantaneously.

Photoluminescence, thermal transport, and breakdown in joule-heated GaN nanowires.

Thermal transport and breakdown in Joule-heated GaN nanowires is investigated using a combination of microphotoluminescence and in situ TEM characterization. The thermal conductivity of the nanowires is estimated to be <80 W/m.K, which is substantially below the bulk GaN value. Catastrophic breakdown in individual nanowires is observed to occur at a maximum temperature of approximately 1000 K, and nanowire morphology near the breakdown region indicates that failure occurs via thermal decomposition, a conclusion that is validated by in situ TEM images obtained during the failure process.