Transforming pollution into solutions: A bibliometric analysis and sustainable strategies for reducing indoor microplastics while converting to value-added products.

Microplastics (MPs), as emerging indoor contaminants, have garnered attention due to their ubiquity and unresolved implications for human health. These tiny particles have permeated indoor air and water, leading to inevitable human exposure. Preliminary evidence suggests MP exposure could be linked to respiratory, gastrointestinal, and potentially other health issues, yet the full scope of their effects remains unclear. To map the overall landscape of this research field, a bibliometric analysis based on research articles retrieved from the Web of Science database was conducted. The study synthesizes the current state of knowledge and spotlights the innovative mitigation strategies proposed to curb indoor MP pollution. These strategies involve minimizing the MP emission from source, advancements in filtration technology, aimed at reducing the MP exposure. Furthermore, this research sheds light on cutting-edge methods for converting MP waste into value-added products. These innovative approaches not only promise to alleviate environmental burdens but also contribute to a more sustainable and circular economy by transforming waste into resources such as biofuels, construction materials, and batteries. Despite these strides, this study acknowledges the ongoing challenges, including the need for more efficient removal technologies and a deeper understanding of MPs' health impacts. Looking forward, the study underscores the necessity for further research to fill these knowledge gaps, particularly in the areas of long-term health outcomes and the development of standardized, reliable methodologies for MP detection and quantification in indoor settings. This comprehensive approach paves the way for future exploration and the development of robust solutions to the complex issue of microplastic pollution.

Critical review on airborne microplastics: An indoor air contaminant of emerging concern.

Airborne Microplastics (MPs), an emerging environmental issue, have gained recent attention due to their newfound presence in indoor environments. Utilizing the Web of Science database for literature collection, the paper presents a comprehensive review of airborne MPs including emission sources, assessment methods, exposure risks, and mitigation strategies. This review delves into the diverse sources and mechanisms influencing indoor airborne MP pollution, underscoring the complex interplay between human activities, ventilation systems, and the characteristics of indoor environments. Major sources include the abrasion of synthetic textiles and the deterioration of flooring materials, with factors like carpeting, airflow, and ventilation significantly impacting MP levels. Human activities, such as increased movement in indoor spaces and the intensive use of plastic-based personal protective equipment (PPE) post-pandemic, notably elevate indoor MP concentrations. The potential health impacts of airborne MPs are increasingly concerning, with evidence suggesting their role in respiratory, immune, and nervous system diseases. Despite this, there is a scarcity of information on MPs in diverse indoor environments and the inhalation risks associated with the frequent use of PPE. This review also stresses the importance of developing effective strategies to reduce MP emissions, such as employing HEPA-filtered vacuums, minimizing the use of synthetic textiles, and enhancing indoor ventilation. Several future research directions were proposed, including detailed temporal analyses of indoor MP levels, interactions of MP with other atmospheric pollutants, the transport dynamics of inhalable MPs (≤10 µm), and comprehensive human exposure risk assessments.

Turning plastics/microplastics into valuable resources? Current and potential research for future applications.

Plastics are a wide range of synthetic or semi-synthetic materials, mainly consisting of polymers. The use of plastics has increased to over 300 million metric tonnes in recent years, and by 2050, it is expected to grow to 800 million. Presently, a mere 10% of plastic waste is recycled, with approximately 75% ended up in landfills. Inappropriate disposal of plastic waste into the environment poses a threat to human lives and marine species. Therefore, this review article highlights potential routes for converting plastic/microplastic waste into valuable resources to promote a greener and more sustainable environment. The literature review revealed that plastics/microplastics (P/MP) could be recycled or upcycled into various products or materials via several innovative processes. For example, P/MP are recycled and utilized as anodes in lithium-ion (Li-ion) and sodium-ion (Na-ion) batteries. The anode in Na-ion batteries comprising PP carbon powder exhibits a high reversible capacity of ∼340 mAh/g at 0.01 A/g current state. In contrast, integrating Fe3O4 and PE into a Li-ion battery yielded an excellent capacity of 1123 mAh/g at 0.5 A/g current state. Additionally, recycled Nylon displayed high physical and mechanical properties necessary for excellent application as 3D printing material. Induction heating is considered a revolutionary pyrolysis technique with improved yield, efficiency, and lower energy utilization. Overall, P/MPs are highlighted as abundant resources for the sustainable production of valuable products and materials such as batteries, nanomaterials, graphene, and membranes for future applications.

Comparison of 3D positional accuracy of implant analogs in printed resin models versus conventional stone casts: Effect of implant angulation.

PURPOSE: To study the effect of implant angulation on 3D linear and absolute angular distortions of implant analogs in printed resin models and conventional stone casts. MATERIALS AND METHODS: Three sectional master models with two implants with total inter-implant angulations of 0°, 10°, and 20° were fabricated. For each master model, five conventional stone casts (CS) and printed resin models (PM) were fabricated (n = 5). Test models were made with nonsplinted impression copings and open tray polyether impressions for the CS groups and scan bodies scanned using an intraoral scanner for the PM groups. The physical positions of the implants and implant analogs were measured with a coordinate measuring machine. 3D linear distortion (ΔR) and absolute angular distortion (Absdθ) defined the 3D positional accuracy of the analogs in the test models. Univariate ANOVA was used to analyze data followed by post hoc tests (Tukey HSD, α = 0.05). RESULTS: Mean ΔR was significantly greater for PM10 (73.5 ± 8.9 µm) and PM20 (65.5 ± 33.3 µm) compared to CS0 (16.8 ± 14.1 µm), CS10 (22.2 ± 13.0 µm), CS20 (15.6 ± 19.9 µm), and PM0 (23.9 ± 16.1 µm). For Absdθ, there were no significant differences between test groups. CONCLUSIONS: With conventional stone casts, implant angulation had no significant effect on 3D linear and absolute angular distortions. Amongst printed resin models test groups, angulated implants had significantly greater ΔR. Amongst angulated implants test groups, printed resin models had significantly greater ΔR than conventional stone casts. Compared to the master model, all test groups, regardless of inter-implant angulation, produced greater inter-analog distances.

Psychometric Properties of the Malay Version of the Coach-Athlete Relationship Questionnaire for Coaches and Athletes.

Background: In the world of sports, motivation is an essential concept that can affect the sporting performance of athletes and help them accomplish their goals. The coach is regarded as an important individual with the ability to significantly influence the athlete's motivation. To assess the impact of the coach-athlete relationship on motivation, the objective of this study was to evaluate the psychometric properties of the Malay version of the Coach-Athlete Relationship Questionnaire (CART-Q) for coaches and athletes. Methods: A cross-sectional survey was conducted among the coaches and athletes in Malaysia. Data were collected using a convenience sampling approach over a 6-month period. The study was carried out in two phases using two independent samples of coaches and athletes to assess the construct validity and internal consistency of the Malay version of the CART-Q. The CART-Q consisted of 11 items measuring three constructs: i) closeness (four items), ii) commitment (three items) and iii) complementarity (four items). In phase 1, the subjects consisted of 211 coaches (21 years old-65 years old) from both sexes and from individual and team sports, ranging from levels 1 to 5. In phase 2, the subjects consisted of 362 athletes (12 years old-39 years old), also from both sexes and from individual and team sports. The statistical analyses performed included confirmatory factor analysis (CFA) to validate the translated version scale, composite reliability (CR), average variance extracted (AVE) and internal consistency (Cronbach's alpha). Results: In phase 1, the sample of coaches, with 190 males (90.0%) and 21 females (10.0%), had a mean age of 38.6 (SD = 8.74) years old. The major sport type was archery (19.0%). The CFA revealed adequate fit indices with all 11 items retained (root mean square error of approximation [RMSEA] = 0.059, comparative fit index [CFI] = 0.964, Tucker and Lewis Index [TLI] = 0.950, standardised root mean square residual [SRMR] = 0.037). The CR values were closeness = 0.874, commitment = 0.566 and complementarity = 0.757. The AVE values were closeness = 0.357, commitment = 0.194 and complementarity = 0.275. The Cronbach's alpha values were closeness = 0.867, commitment = 0.553 and complementarity = 0.794. In phase 2, the sample of athletes, with 175 males (48.1%) and 189 females (51.9%), had a mean age of 20.2 (SD = 3.35) years old. The major sport type was archery (11.5%). The CFA revealed satisfactory fit indices with all 11 items retained (RMSEA = 0.092, CFI = 0.948, TLI = 0.924, SRMR =.038). The CR values were closeness = 0.893, commitment = 0.786 and complementarity = 0.949. The AVE values were closeness = 0.401, commitment = 0.253 and complementarity = 0.418. The Cronbach's alpha values were closeness = 0.900, commitment = 0.772 and complementarity = 0.900. Conclusion: Overall, the study findings supported the conclusion that the Malay version of the CART-Q has adequate psychometric properties to assess the perceptions of coaches and athletes regarding their relationship.

Small extracellular vesicles from mesenchymal stromal cells: the next therapeutic paradigm for musculoskeletal disorders.

Musculoskeletal disorders are one of the biggest contributors to morbidity and place an enormous burden on the health care system in an aging population. Owing to their immunomodulatory and regenerative properties, mesenchymal stromal/stem cells (MSCs) have demonstrated therapeutic efficacy for treatment of a wide variety of conditions, including musculoskeletal disorders. Although MSCs were originally thought to differentiate and replace injured/diseased tissues, it is now accepted that MSCs mediate tissue repair through secretion of trophic factors, particularly extracellular vesicles (EVs). Endowed with a diverse cargo of bioactive lipids, proteins, nucleic acids and metabolites, MSC-EVs have been shown to elicit diverse cellular responses and interact with many cell types needed in tissue repair. The present review aims to summarize the latest advances in the use of native MSC-EVs for musculoskeletal regeneration, examine the cargo molecules and mechanisms underlying their therapeutic effects, and discuss the progress and challenges in their translation to the clinic.

Bisphosphonate therapy after liver transplant improves bone mineral density and reduces fracture rates: an updated systematic review and meta-analysis.

To investigate the efficacy of bisphosphonates and compare oral and IV formulations on bone mineral density (BMD) and fracture incidence in post-orthotopic liver transplant (OLT) patients. Electronic databases were searched, and six RCTs and three cohort studies were included out of 711 articles. Main outcomes included post-OLT BMD changes, fracture incidence, and treatment adverse reactions. Pairwise meta-analysis was conducted for binary and continuous outcomes, while pooled fracture incidence utilized single-arm meta-analysis. Post-OLT fracture incidence was reported in nine studies (n = 591). Total fracture incidence was 6.6% (CI: 3.4-12.4%) in bisphosphonate group and 19.1% (CI: 14.3-25.1%) in calcium and vitamin D group. Total fractures were significantly lower in patients on bisphosphonate, compared to calcium and vitamin D (n = 591; OR = 0.037; CI: 0.18-0.77; P = 0.008). Overall fractures were significantly lower in the oral group (n = 263; OR = 0.26; CI: 0.08-0.85; P = 0.02) but not in the IV group (n = 328; OR = 0.45; CI: 0.16-1.26; P = 0.129). Both oral and IV bisphosphonates are effective in reducing fracture incidence post-OLT compared to calcium and vitamin D. Oral formulations may also have an advantage over IV in reducing bone loss and fracture incidence post-OLT.

A systematic review and meta-analysis on the incidence of osteoporosis and fractures after liver transplant.

Following liver transplant (LT), osteoporosis is a severe complication that causes morbidity. However, the incidence and risk factors of osteoporosis and fractures have not been well described. Single-arm meta-analysis of studies reporting osteopenia, osteoporosis, and fractures post-LT was performed with meta-regression for study period. Dichotomous variables, continuous variables and time-to-event variables were pooled in odds ratio, weighted mean difference and hazard ratio, respectively. For risk factors with limited data, a systematic review of literature was conducted. There was a significant increase in both osteoporosis and fractures compared to non-LT patients. Osteopenia, osteoporosis and incident fractures were newly diagnosed in 34.53% (CI: 0.17-0.56, n = 301), 11.68% (CI: 0.05-0.24, n = 1251) and 20.40% (CI: 0.13-0.30, n = 4322) of LT patients, respectively. Female gender (P = 0.017) increased risks of osteoporosis but not older age and BMI. Older age, lower pre-LT bone mineral density (BMD), presence of bone disease pre-LT were significant risk factors for fractures but not female gender, post-menopausal state, BMI, smoking and alcohol. There is a high incidence of skeletal complications post-LT. Older age, lower pre-LT BMD and presence of bone disease pre-LT are significant risk factors that are associated with incident fractures physicians should be cognisant of in liver transplant recipients.

All-Cause Failure Rates Increase With Time Following Meniscal Repair Despite Favorable Outcomes: A Systematic Review and Meta-analysis.

PURPOSE: The purpose of this review is to perform a meta-analysis of studies reporting meniscus repair outcomes. Pooled analyses of such studies will provide an accurate estimate of the outcomes that can be expected following meniscal repair at various postoperative time points. METHODS: A meta-analysis of meniscal repair failure (defined as persistent symptoms, lack of healing on magnetic resonance imaging or revision surgery) and other clinical outcomes was performed following meniscal repair. Patients included had traumatic, nondegenerative meniscal tears, were skeletally mature, and had specific time-points after surgery. Repairs included were performed either in isolation, or with concomitant ACL reconstruction. Because of the inherent heterogeneity of single-arm meta-analyses, pooled analyses were performed using a random-effects model. RESULTS: Rates of all-cause meniscal repair failure was pooled to be 12% at 0-1 years (95% CI: .09-.16), 15% at 2-3 years (95% CI: .11-.20), and 19% at 4-6 years (95% CI: .13-.24). Sensitivity analysis for studies performing meniscal repair entirely on patients with concomitant ACL reconstruction (ACLR) showed comparable rates of failure at similar time intervals. Development of osteoarthritis, in patients with knees previously free from articular pathologies, was 4% at 2-3 years (95% CI: .02-.07), and 10% at 4-6 years (95% CI: .03-.25). CONCLUSION: Meniscus repair for traumatic injuries have an all-cause failure rate that increases from 12% to 19% through a time period ranging from 1-6 years following surgery. The failure rates were comparable for patients with meniscal repairs performed with concomitant ACLRs. LEVEL OF EVIDENCE: IV; Systematic Review of Level II-IV Studies.

Accuracy of Implant Analogs in 3D Printed Resin Models.

PURPOSE: To study the effect of implant analog system, print orientation, and analog holder radial offset on 3D linear and absolute angular distortions of implant analogs in 3D printed resin models. MATERIALS AND METHODS: A sectional master model simulating a 2-implant, 3-unit fixed prosthesis in a partially edentulous jaw was fabricated. Three implant analog systems for 3D printed resin models-Straumann (ST), Core3DCentres (CD) and Medentika (MD)-were tested. The corresponding scan bodies were secured onto the implants and scanned using an intraoral scanner. Models were obtained with a Digital Light Processing printer. Each implant analog system had 2 print orientations (transverse [X] and perpendicular [Y] to the printer door) and 2 analog holder radial offsets (0.04 mm and 0.06 mm), for a total of 60 models. The physical positions of the implants in the master model and the analogs in the printed resin models were directly measured with a Coordinate Measuring Machine (CMM). 3D linear distortion (ΔR) and absolute angular distortion (Absdθ) defined the 3D accuracy of the analogs in the printed models. Univariate ANOVA was used to analyse data followed by post hoc tests (Tukey HSD, α = 0.05). RESULTS: Mean ΔR for ST (-155.7 ± 60.6 µm), CD (124.9 ± 65.0 µm) and MD (-92.9 ± 48.0 µm) were significantly different (p < 0.01). Mean Absdθ was not significantly different between ST (0.57 ± 0.48°) and CD (0.41 ± 0.27°), but both were significantly different from MD (2.11 ± 1.14°) (p < 0.01). Print orientation had a significant effect on ΔR only but no discernible trend could be found. Analog holder radial offset had no significant effect on ΔR and Absdθ. CONCLUSIONS: Implant analog system had a significant effect on ΔR and Absdθ. Compared to the master model, CD produced greater mean interanalog distances, while ST and MD produced smaller mean interanalog distances. MD exhibited the greatest mean angular distortion which was significantly greater than ST and CD.

Epidemiology of patients with anterior cruciate ligament injuries undergoing reconstruction surgery in a multi-ethnic Asian population.

We conducted an epidemiological study to identify the demographics and pre-operative characteristics of patients undergoing primary anterior cruciate ligament (ACL) reconstruction in a multi-ethnic Asian population. A retrospective study was performed on 696 patients who registered in our ACL reconstruction registry from January 2013 to August 2016. Important inter-ethnic differences were found. Indian patients were significantly older compared to Malay and Chinese patients. Malay and Indian patients were more likely to be male, overweight, and obese compared to Chinese patients. Soccer was the predominant sport involved, although ethnic predominance in specific sports exists. Novel findings from this study include increased prevalence of concomitant chondral injuries in the Chinese population compared to Malays and Indians, and significantly higher rates of concomitant intra-articular injuries in soccer and basketball compared to netball. Identification of these high-risk subgroups would serve useful in guiding the formulation of prevention strategies within our multi-ethnic community.

Intra-Articular Injections of Mesenchymal Stem Cell Exosomes and Hyaluronic Acid Improve Structural and Mechanical Properties of Repaired Cartilage in a Rabbit Model.

PURPOSE: To compare the efficacy of mesenchymal stem cell (MSC) exosomes with hyaluronic acid (HA) against HA alone for functional cartilage regeneration in a rabbit osteochondral defect model. METHODS: Critical-size osteochondral defects (4.5-mm diameter and 1.5-mm depth) were created on the trochlear grooves in the knees of 18 rabbits and were randomly allocated to 2 treatment groups: (1) exosomes and HA combination and (2) HA alone. Three 1-mL injections of either exosomes and HA or HA alone were administered intra-articularly immediately after surgery and thereafter at 7 and 14 days after surgery. At 6 and 12 weeks, gross evaluation, histologic and immunohistochemical analysis, and scoring were performed. The functional biomechanical competence of the repaired cartilage also was evaluated. RESULTS: Compared with defects treated with HA, defects treated with exosomes and HA showed significant improvements in macroscopic scores (P = .032; P = .001) and histologic scores (P = .005; P < .001) at 6 and 12 weeks, respectively. Defects treated with exosomes and HA also demonstrated improvements in mechanical properties compared with HA-treated defects, with significantly greater Young's moduli (P < .05) and stiffness (P < .05) at 6 and 12 weeks. By 12 weeks, the newly-repaired tissues in defects treated with exosomes and HA composed mainly of hyaline cartilage that are mechanically and structurally superior to that of HA-treated defects and demonstrated mechanical properties that approximated that of adjacent native cartilage (P > .05). In contrast, HA-treated defects showed some repair at 6 weeks, but this was not sustained, as evidenced by significant deterioration of histologic scores (P = .002) and a plateau in mechanical properties from 6 to 12 weeks. CONCLUSIONS: This study shows that the combination of MSC exosomes and HA administered at a clinically acceptable frequency of 3 intra-articular injections can promote sustained and functional cartilage repair in a rabbit post-traumatic cartilage defect model, when compared with HA alone. CLINICAL RELEVANCE: Human MSC exosomes and HA administered in combination promote functional cartilage repair and may represent a promising cell-free therapy for cartilage repair in patients.

Chemoprophylaxis in addition to mechanical prophylaxis after total knee arthroplasty surgery does not reduce the incidence of venous thromboembolism.

BACKGROUND: Venous thromboembolism (VTE) of the lower limbs is an important complication post total knee arthroplasty (TKA). Current guidelines recommend routine chemical prophylaxis to all patients undergoing this procedure but this is rarely done in Asia as it is believed that Asians have a lower risk of VTE. However, recent evidence suggests otherwise. AIMS: We evaluated the incidence of DVT after TKA in a multi-ethnic Asian population with and without pharmacological prophylaxis, as well as the management and outcome of patients with post-operative DVTs. METHODS: We conducted a retrospective study of consecutive patients who underwent TKA in our hospital from 1st January 2004 to 30th December 2014. All patients were on mechanical thromboprophylaxis via calf pumps after TKA with a postoperative day 3 to 5 doppler ultrasound (DUS) of bilateral lower limbs. 2258 (80.7%) patients did not receive additional chemoprophylaxis, while 540 (19.3%) received chemoprophylaxis on top of mechanical thromboprophylaxis. All patients who received chemoprophylaxis were administered the drug until they were ambulating, with a median administration duration of 6 days. Patients were followed up for a period of 3 months for recurrence of DVTs and 24 months for postoperative outcome scores. RESULTS: Two thousand nine hundred seventy-eight patients had DUS of the lower limbs with 134 diagnosed with DVT giving an incidence of 4.5%. Six of these patients had concurrent PEs. There were 26 (19.4%) proximal DVTs and 108 (80.6%) distal DVTs. After 3 months of follow up, no additional VTE occurred. None of the DVTs or PEs progressed.All DVTs with accompanying PE were proximal. 102 out of 2200 patients (4.6%) without chemoprophylaxis developed DVT as compared to 32 out of 540 patients (5.9%) with chemoprophylaxis, which was not statistically significant (p = 0.13). 19 (0.8%) proximal and 83 (3.8%) distal DVT developed in the patient group without chemoprophylaxis while 4 (0.7%) proximal and 28 (5.2%) distal DVT developed in the patient group with (p = 0.62). Comparison of the incidence of PEs between the two groups, revealed a similar incidence with 5 out of 2200 patients (0.2%) without chemoprophylaxis developing PE as compared to 1 out of 540 patients (0.2%) with chemoprophylaxis (p = 0.87).In addition, patients with chemoprophylaxis showed an association with higher post-operative outcome scores such as post op 6 months SF36 (PCS), post op 12 months SF36 (PCS), post op 12 months SF36 (MCS), post op 24 months SF36 (MCS) and post op 24 months WOMAC. CONCLUSION: In one of the largest Asian studies specifically investigating the incidence of DVT after TKA, we found that the incidence is low at 4.5%. This is in contrast to recent studies that showed higher post-operative VTE rates similar to Western populations. In addition, patients who were administered chemoprophylaxis did not have a statistically significant difference in incidence of VTE although it did show a correlation with higher post-operative outcome scores which may indicate better function. This was seen in functional outcome scores such as post op 6 months SF36 (PCS), post op 12 months SF36 (PCS), post op 12 months SF36 (MCS), post op 24 months SF36 (MCS) and post op 24 months WOMAC.

The presence of concomitant intra-articular injuries and bone bruise does not affect pre-operative knee pain and symptoms in patients undergoing anterior cruciate ligament reconstruction.

PURPOSE: Increased knee pain at the time of anterior cruciate ligament (ACL) reconstruction may predict increased pain post-operatively, a prolonged recovery and a more difficult rehabilitation. The main objective of our study was to identify preoperative factors, such as concomitant intra-articular injuries and bone bruises, that may be associated with increased knee pain and symptoms in patients undergoing ACL reconstruction. METHODS: Patient data was queried from our institution's prospectively maintained ACL reconstruction registry. Two-hundred and seventy patients who underwent primary ACL reconstruction within 3 months of injury were included in the study. Predictors such as demographic characteristics (age, body mass index and gender) and injury characteristics (mechanism of injury, meniscal injury, chondral injury and bone bruise) were recorded. The association between the pre-operative knee injury and Osteoarthritis Outcome Score (KOOS) pain and symptom subscales and the Short Form-36 (SF-36) bodily pain subscale, and the predictors were assessed using logistic regression for categorical variables and linear regression for continuous variables. RESULTS: The mean age of our patient group was 25.4 years with 211 out of 270 (78%) being males. Bone bruise was present in 243 patients (90%), meniscal injury in 165 (61%) patients and chondral injury in 40 (15%) patients. The presence of bone bruise, meniscal injury or chondral injury was not significantly associated with worse preoperative KOOS pain and symptom and SF-36 bodily pain scores. Other factors that were not associated were demographic characteristics (age, BMI and gender) and mechanism of injury. CONCLUSION: The presence of bone bruise and concomitant intra-articular injuries does not affect pre-operative knee pain and symptoms in patients undergoing ACL reconstruction within 3 months of injury. This knowledge would aid the surgeon in pre-operative counselling, and prognostication of post-operative pain and rehabilitation after ACL reconstruction.

Anterior cruciate ligament reconstruction performed within 12 months of the index injury is associated with a lower rate of medial meniscus tears.

PURPOSE: To verify the correlation of time to surgery with the prevalence of concomitant intra-articular injuries detected on arthroscopy during anterior cruciate ligament (ACL) reconstruction. METHODS: The medical records of 653 patients who underwent ACL reconstruction surgery were retrospectively analyzed. Univariate and multivariate logistic regression analysis was performed to identify factors that were associated with the presence of at least one intra-articular injury, medial meniscus tears, lateral meniscus tears and chondral injuries at the time of surgery. Further univariate analysis was conducted to determine the earliest time-point for surgery, after which the rate of concomitant injuries was significantly higher. RESULTS: Longer time to surgery (OR 1.019 95% CI 1.010, 1.028, p = 0.000), male sex (OR 1.695 95% CI 1.074, 2.675 p = 0.023), and higher BMI (OR 1.050 95% CI 1.006, 1.097 p = 0.025) were correlated with a higher prevalence of medial meniscus tears. There was an increased prevalence of medial meniscus tears when surgery was carried out more than 12 months after the index injury (OR 2.274 95% CI 1.469, 3.522, p = 0.000). The correlation between longer time to surgery and chondral injuries approached statistical significance (OR 1.006 95% CI 0.999, 1.012, p = 0.073). However, a longer time to surgery was not associated with an increased prevalence of lateral meniscus tears (OR 1.003 95% CI 0.998, 1.009, p = n.s.). CONCLUSIONS: Longer time to surgery is associated with an increased prevalence of medial meniscus tears in ACL reconstruction. Surgery performed within 12 months of the index injury reduces the prevalence of medial meniscus tears. Prioritizing males and overweight patients for counselling and early intervention can be considered. LEVEL OF EVIDENCE: Therapeutic level III retrospective cohort study.

New compounds with antimicrobial activities from Elaeodendron buchananii stem bark.

The plant species Elaeodendron buchananii Loes is widely used in folklore medicine to manage microbial infections in Kenya. Previous studies on the plant fruits and root bark revealed the presence of steroids and terpenoids. The present phytochemical analysis of the plant stem bark has led to the isolation of four new triterpenes characterized as methyl 3ß-acetoxy-11α, 19α, 28-trihydroxyurs-12-en-23-oic acid (1), 3ß, 11α, 19α-trihydroxyurs-12-en-23, 28-dioic acid (2), 3ß-acetoxy-19α, 23, 28-trihydroxyurs-12-ene (3) and 3-oxo-19α, 28-dihydroxyurs-12-en-24-oic acid (4), together with ten known ones (5-14), whose structures were elucidated using spectroscopic techniques. The isolate canophyllol (8) showed promising antibacterial activity against N. meningitides with MIC value of 31.25 µg/ml.

Three-Dimensional Static Articulation Accuracy of Virtual Models - Part I: System Trueness and Precision.

PURPOSE: To evaluate the 3D static articulation accuracy of 3 model scanner-CAD systems (Ceramill Map400 [AG], inEos X5 [SIR], Scanner S600 Arti [ZKN]) using a coordinate measuring machine (CMM). Trueness and precision for each system will be reported in Part I. MATERIALS AND METHODS: The master model simulated a single crown opposing a 3-unit fixed dental prosthesis. Five mounted stone cast sets were prepared, and one set was randomly selected. Reference values were obtained by measuring interarch and interocclusal reference features with the CMM. The stone cast set was scanned 5 times consecutively and articulated virtually with each system (3 test groups, n = 5). STL files of the virtual models were measured with CMM software. dRR , dRC , and dRL , represented interarch global distortions at right, central, and left sides, respectively, while dRM , dXM , dYM , and dZM represented interocclusal global and linear distortions between preparations. RESULTS: For trueness values, mean interarch global distortions ranged from 13.1 to 40.3 µm for dRR , -199.0 to -48.1 µm for dRC , and -114.1 to -47.7 µm for dRL . Mean percentage error of interarch distortion did not exceed 0.6%. Mean interocclusal distortions ranged from 16.0 to 117.0 µm for dRM , -33.1 to 101.3 µm for dXM , 32.9 to 49.9 µm for dYM and -32.0 to 133.1 µm for dZM. ANOVA of trueness found statistically significant differences for dRC , dRL , dRM , dXM , and dZM . For precision values, absolute mean difference between the 10 superimposition combinations ranged from 25.3 to 91.0 µm for dRR , 21.5 to 85.5 µm for dRC , 24.8 to 70.0 µm for dRL . Absolute mean difference ranged from 49.9 to 66.1 µm for dRM , 20.7 to 92.1 µm for dXM , 86.8 to 96.0 µm for dYM , and 36.5 to 100.0 µm for dZM . ANOVA of precision of all test groups found statistically significant differences for dRR , dRC , dRL , dXM and dZM , and the SIR group was the least precise. CONCLUSION: The overall interarch global distortion of all three model scanner-CAD systems was low and did not exceed 0.6%. Variations in scanner technology, virtual articulation algorithm, and use of physical articulators contributed to the differences in distortion observed among all three groups.

Three-Dimensional Static Articulation Accuracy of Virtual Models-Part II: Effect of Model Scanner-CAD Systems and Articulation Method.

PURPOSE: Accurate maxillomandibular relationship transfer is important for CAD/CAM prostheses. This study compared the 3D-accuracy of virtual model static articulation in three laboratory scanner-CAD systems (Ceramill Map400 [AG], inEos X5 [SIR], Scanner S600 Arti [ZKN]) using two virtual articulation methods: mounted models (MO), interocclusal record (IR). MATERIALS AND METHODS: The master model simulated a single crown opposing a 3-unit fixed partial denture. Reference values were obtained by measuring interarch and interocclusal reference features with a coordinate measuring machine (CMM). MO group stone casts were articulator-mounted with acrylic resin bite registrations while IR group casts were hand-articulated with poly(vinyl siloxane) bite registrations. Five test model sets were scanned and articulated virtually with each system (6 test groups, 15 data sets). STL files of the virtual models were measured with CMM software. dRR , dRC , and dRL , represented interarch global distortions at right, central, and left sides, respectively, while dRM , dXM , dYM , and dZM represented interocclusal global and linear distortions between preparations. RESULTS: Mean interarch 3D distortion ranged from -348.7 to 192.2 µm for dRR , -86.3 to 44.1 µm for dRC , and -168.1 to 4.4 µm for dRL . Mean interocclusal distortion ranged from -257.2 to -85.2 µm for dRM , -285.7 to 183.9 µm for dXM , -100.5 to 114.8 µm for dYM , and -269.1 to -50.6 µm for dZM . ANOVA showed that articulation method had significant effect on dRR and dXM , while system had a significant effect on dRR , dRC , dRL , dRM , and dZM . There were significant differences between 6 test groups for dRR, dRL dXM , and dZM . dRR and dXM were significantly greater in AG-IR, and this was significantly different from SIR-IR, ZKN-IR, and all MO groups. CONCLUSIONS: Interarch and interocclusal distances increased in MO groups, while they decreased in IR groups. AG-IR had the greatest interarch distortion as well as interocclusal superior-inferior distortion. The other groups performed similarly to each other, and the overall interarch distortion did not exceed 0.7%. In these systems and articulation methods, interocclusal distortions may result in hyper- or infra-occluded prostheses.

Delayed lymphocele formation following lateral lumbar interbody fusion of the spine.

PURPOSE: This paper aims to describe the rare post-operative complication of a lymphocele formation after lateral lumbar interbody fusion. METHODS: The patient in this case was a 76-year-old lady with a 10 year history of low back pain and neurogenic claudication. She had previously underwent multiple spine surgeries for her condition. She presented to our institution for a recurrence of her low back pain and right anterior thigh pain. She then underwent surgery in two stages; first, a mini-open lateral interbody fusion at L3/4 and L4/5; second, posterior instrumentation of T3 to S1 with sagittal spinal deformity correction. RESULTS: The patient recovered uneventfully in the initial post op period and was discharged within 8 days. However, she developed abdominal distension and discomfort 6 months after surgery. MRI and CT scan of her abdomen showed a retroperitoneal fluid collection compressing her left ureter, resulting in hydroureter and hydronephrosis. She was managed with a CT-guided drainage of the fluid collection. Fluid analysis was consistent with a lymphocele. Since the procedure, the patient has been asymptomatic for 2 years. CONCLUSIONS: Delayed lymphocele formation is a potential complication of lateral lumbar interbody fusion. When present, it can be managed conservatively with good results. This case suggests that surgeons should have a low threshold to investigate for a lymphocele development post-anterior or lateral lumbar spine surgery. The authors recommend the placement of a post surgical retroperitoneal drain, as it might assist in the early detection of a lymphocele formation.

Antioxidant compounds from the stem bark of Garcinia atroviridis.

A new xanthone, namely garcinexanthone G (1), along with eight known compounds, stigmasta-5,22-dien-3ß-ol (2), stigmasta-5,22-dien-3-O-ß-glucopyranoside (3), 3ß-acetoxy-11α,12α-epoxyoleanan-28,13ß-olide (4), 2,6-dimethoxy-p-benzoquinone (5), 1,3,5-trihydroxy-2-methoxyxanthone (6), 1,3,7-trihydroxyxanthone (7), kaempferol (8) and quercetin (9), were isolated from the stem bark of Garcinia atroviridis. Their structures were elucidated based on spectroscopic methods including nuclear magnetic resonance (NMR-1D and 2D), UV, IR, and mass spectrometry. All the isolated compounds were evaluated for their antioxidant properties based on the DPPH radical scavenging activities. Results showed that 1,3,7-trihydroxyxanthone and quercetin showed significant antioxidant activities with EC50 values of 16.20 and 12.68 µg/ml, respectively, as compared to the control, ascorbic acid (7.4 µg/ml).