Thermal Cycling of a MOF-Based NO Disproportionation Catalyst.

The metal-organic framework CuI-MFU-4l reacts with NO, initially forming a copper(I)-nitrosyl at low pressure, and subsequently generates NO disproportionation products CuII-NO2 and N2O. The thermal stability of MFU-4l allows NOx to be released from the framework at temperatures greater than 200 °C. This treatment regenerates the original CuI-MFU-4l, which can engage in subsequent cycles of NO disproportionation.

Divergent Adsorption Behavior Controlled by Primary Coordination Sphere Anions in the Metal-Organic Framework Ni2X2BTDD.

CO, ethylene, and H2 demonstrate divergent adsorption enthalpies upon interaction with a series of anion-exchanged Ni2X2BTDD materials (X = OH, F, Cl, Br; H2BTDD = bis(1H-1,2,3-triazolo[4,5-b][4',5'-i])dibenzo[1,4]dioxin)). The dissimilar responses of these conventional π-acceptor gaseous ligands are in contrast with the typical behavior that may be expected for gas sorption in metal-organic frameworks (MOFs), which generally follows similar periodic trends for a given set of systematic changes to the host MOF structure. A combination of computational and spectroscopic data reveals that the divergent behavior, especially between CO and ethylene, stems from a predominantly σ-donor interaction between the former and Ni2+ and a π-acceptor interaction for the latter. These findings will facilitate further deliberate postsynthetic modifications of MOFs with open metal sites to control the equilibrium selectivity of gas sorption.

Spectroscopic Evidence of Hyponitrite Radical Intermediate in NO Disproportionation at a MOF-Supported Mononuclear Copper Site.

Dianionic hyponitrite (N2 O22- ) is often proposed, based on model complexes, as the key intermediate in reductive coupling of nitric oxide to nitrous oxide at the bimetallic active sites of heme-copper oxidases and nitric oxide reductases. In this work, we examine the gas-solid reaction of nitric oxide with the metal-organic framework CuI -ZrTpmC* with a suite of in situ spectroscopies and density functional theory simulations, and identify an unusual chelating N2 O2.- intermediate. These results highlight the advantage provided by site-isolation in metal-organic frameworks (MOFs) for studying important reaction intermediates, and provide a mechanistic scenario compatible with the proposed one-electron couple in these enzymes.

Record-Setting Sorbents for Reversible Water Uptake by Systematic Anion Exchanges in Metal-Organic Frameworks.

The reversible capture of water vapor at low humidity can enable transformative applications such as atmospheric water harvesting and heat transfer that uses water as a refrigerant, replacing environmentally detrimental hydro- and chloro-fluorocarbons. The driving force for these applications is governed by the relative humidity at which the pores of a porous material fill with water. Here, we demonstrate modulation of the onset of pore-filling in a family of metal-organic frameworks with record water sorption capacities by employing anion exchange. Unexpectedly, the replacement of the structural bridging Cl- with the more hydrophilic anions F- and OH- does not induce pore-filling at lower relative humidity, whereas the introduction of the larger Br- results in a substantial shift toward lower relative humidity. We rationalize these results in terms of pore size modifications as well as the water hydrogen bonding structure based on detailed infrared spectroscopic measurements. Fundamentally, our data suggest that, in the presence of strong nucleation sites, the thermodynamic favorability of water pore-filling depends more strongly on the pore diameter and the interface between water in the center of the pore and water bound to the pore walls than the hydrophilicity of the pore wall itself. On the basis of these results, we report two materials that exhibit record water uptake capacities in their respective humidity regions and extended stability over 400 water adsorption-desorption cycles.

Experimental and Computational Investigation of the Aerobic Oxidation of a Late Transition Metal-Hydride.

The rational development of homogeneous catalytic systems for selective aerobic oxidations of organics has been hampered by the limited available knowledge of how oxygen reacts with important organometallic intermediates. Recently, several mechanisms for oxygen insertion into late transition metal-hydride bonds have been described. Contributing to this nascent understanding of how oxygen reacts with metal-hydrides, a detailed mechanistic study of the reaction of oxygen with the IrIII hydride complex (dmPhebox)Ir(OAc)(H) (1) in the presence of acetic acid, which proceeds to form the IrIII complex (dmPhebox)Ir(OAc)2(OH2) (2), is described. The evidence supports a multifaceted mechanism wherein a small amount of an initially formed metal hydroperoxide proceeds to generate a metal-oxyl species that then initiates a radical chain reaction to rapidly convert the remaining IrIII-H. Insight into the initiation step was gained through kinetic and mechanistic studies of the radical chain inhibition by BHT (butylated hydroxytoluene). Computational studies were employed to contribute to a further understanding of initiation and propagation in this system.

Reversible Metalation and Catalysis with a Scorpionate-like Metallo-ligand in a Metal-Organic Framework.

The installation of metallo-ligands in metal-organic frameworks (MOFs) is an effective means to create site-isolated metal centers toward single-site heterogeneous catalysis. Although trispyrazolyborate (Tp) and tripyrazolylmethane (Tpm) form one of the most iconic classes of homogeneous catalysts, neither has been used as a metallo-ligand for the generation of MOFs thus far. Here, we show that upon in situ metalation with CuI, a tricarboxylated Tpm ligand reacts with ZrOCl2 to generate a new MOF exhibiting neutral scorpionate-like chelating sites. These sites undergo for facile demetalation and remetalation with retention of crystallinity and porosity. When remetalated with CuI, the MOF exhibits spectroscopic features and catalytic activity for olefin cyclopropanation reactions that are similar to the molecular [Cu(CH3CN)Tpm*]PF6 complex (Tpm* = tris(3,5-dimethylpyrazolyl)methane). These results demonstrate the inclusion of Tp or Tpm metallo-ligands in a MOF for the first time and provide a blueprint for immobilizing Tpm* catalysts in a spatially isolated and well-defined environment.

Tunable Metal-Organic Frameworks Enable High-Efficiency Cascaded Adsorption Heat Pumps.

Rising global standards of living coupled to the recent agreement to eliminate hydrofluorocarbon refrigerants are creating intense pressure to develop more sustainable climate control systems. In this vein, the use of water as the refrigerant in adsorption heat pumps is highly attractive, but such adsorption systems are constrained to large size and poor efficiency by the characteristics of currently employed water sorbents. Here we demonstrate control of the relative humidity of water uptake by modulating the pore size in a family of isoreticular triazolate metal-organic frameworks. Using this method, we identify a pair of materials with stepped, nonoverlapping water isotherms that can function in tandem to provide continuous cooling with a record ideal coefficient of performance of 1.63. Additionally, when used in a single-stage heat pump, the microporous Ni2Cl2BBTA has the largest working capacity of any material capable of generating a 25 °C difference between ambient and chiller output.

ß-Hydride Elimination and C-H Activation by an Iridium Acetate Complex, Catalyzed by Lewis Acids. Alkane Dehydrogenation Cocatalyzed by Lewis Acids and [2,6-Bis(4,4-dimethyloxazolinyl)-3,5-dimethylphenyl]iridium.

NaBArF4 (sodium tetrakis[(3,5-trifluoromethyl)phenyl]borate) was found to catalyze reactions of (Phebox)IrIII(acetate) (Phebox = 2,6-bis(4,4-dimethyloxazolinyl)-3,5-dimethylphenyl) complexes, including (i) ß-H elimination of (Phebox)Ir(OAc)(n-alkyl) to give (Phebox)Ir(OAc)(H) and the microscopic reverse, alkene insertion into the Ir-H bond of (Phebox)Ir(OAc)(H), and (ii) hydrogenolysis of the Ir-alkyl bond of (Phebox)Ir(OAc)(n-alkyl) and the microscopic reverse, C-H activation by (Phebox)Ir(OAc)(H), as indicated by H/D exchange experiments. For example, ß-H elimination of (Phebox)Ir(OAc)(n-octyl) (2-Oc) proceeded on a time scale of minutes at -15 °C in the presence of (0.4 mM) NaBArF4 as compared with a very slow reaction at 125 °C in the absence of NaBArF4. In addition to NaBArF4, other Lewis acids are also effective. Density functional theory calculations capture the effect of the Na+ cation and indicate that it operates primarily by promoting κ2-κ1 dechelation of the acetate anion, which opens the coordination site needed to allow the observed reaction to proceed. In accord with the effect on these individual stoichiometric reactions, NaBArF4 was also found to cocatalyze, with (Phebox)Ir(OAc)(H), the acceptorless dehydrogenation of n-dodecane.

Probing Dative and Dihydrogen Bonding in Ammonia Borane with Electronic Structure Computations and Raman under Nitrogen Spectroscopy.

Although ammonia borane is isoelectronic with ethane and they have similar structures, BH3NH3 exhibits rather atypical bonding compared to that in CH3CH3. The central bond in ammonia borane is actually a coordinate covalent or dative bond rather than the conventional covalent C-C bond in ethane where each atom donates one electron. In addition, strong intermolecular dihydrogen bonds can form between two or more ammonia borane molecules compared to the relatively weak dispersion forces between ethane molecules. As a result, ammonia borane's physical properties are very sensitive to the environment. For example, gas-phase and solid-state ammonia borane have very different BN bond lengths and BN stretching frequencies, which led to much debate in the literature. It has been demonstrated that the use of cluster models based on experimental crystal structures led to better agreement between theory and experiment. Here, we employ a variety of cluster models to track how the interaction energies, bond lengths, and vibrational normal modes evolve with the size and structural characteristics of the clusters. The M06-2X/6-311++G(2df,2pd) level of theory was selected for this analysis on the basis of favorable comparison with CCSD(T)/aug-cc-pVTZ data for the ammonia borane monomer and dimer. Fourteen unique fully optimized molecular cluster geometries, (BH3NH3)n≤12, and nine crystal models, (BH3NH3)n≤19, were used to elucidate how the local environment impacts ammonia borane's physical properties. Computational results for the BN stretching frequencies are also compared directly to the Raman spectrum of solid ammonia borane at 77 K using Raman under liquid nitrogen spectroscopy (RUNS). A strong linear correlation was found to exist between the BN bond length and stretching frequency, from an isolated monomer to the most distorted BH3NH3 unit in a cluster or crystal structure model. Excellent agreement was seen between the frequencies computed for the largest crystal model and the RUNS experimental spectra (typically within a few wavenumbers).

Competition between Hydrophilic and Argyrophilic Interactions in Surface Enhanced Raman Spectroscopy.

The competition for binding and charge-transfer (CT) from the nitrogen containing heterocycle pyrimidine to either silver or to water in surface enhanced Raman spectroscopy (SERS) is discussed. The correlation between the shifting observed for vibrational normal modes and CT is analyzed both experimentally using Raman spectroscopy and theoretically using electronic structure theory. Discrete features in the Raman spectrum correspond to the binding of either water or silver to each of pyrimidine's nitrogen atoms with comparable frequency shifts. Natural bond orbital (NBO) calculations in each chemical environment reveal that the magnitude of charge transfer from pyrimidine to adjacent silver atoms is only about twice that for water alone. These results suggest that the choice of solvent plays a role in determining the vibrational frequencies of nitrogen containing molecules in SERS experiments.

Understanding the role of hyponitrite in nitric oxide reduction.

Herein, we review the preparation and coordination chemistry of cis and trans isomers of hyponitrite, [N2O2](2-). Hyponitrite is known to bind to metals via a variety of bonding modes. In fact, at least eight different bonding modes have been observed, which is remarkable for such a simple ligand. More importantly, it is apparent that the cis isomer of hyponitrite is more reactive than the trans isomer because the barrier of N2O elimination from cis-hyponitrite is lower than that of trans-hyponitrite. This observation may have important mechanistic implications for both heterogeneous NOx reduction catalysts and NO reductase. However, our understanding of the hyponitrite ligand has been limited by the lack of a general route to this fragment, and most instances of its formation have been serendipitous.

A copper(I)-arene complex with an unsupported η6 interaction.

Addition of PR3 (R=Ph or OPh) to [Cu(η(2)-Me6C6)2][PF6] results in the formation of [(η(6)-Me6C6)Cu(PR3)][PF6], the first copper-arene complexes to feature an unsupported η(6) arene interaction. A DFT analysis reveals that the preference for the η(6) binding mode is enforced by the steric clash between the methyl groups of the arene ligand and the phenyl rings of the phosphine co-ligand.

Reaction of a bridged frustrated Lewis pair with nitric oxide: a kinetics study.

Described is a kinetics and computational study of the reaction of NO with the intramolecular bridged P/B frustrated Lewis pair (FLP) endo-2-(dimesitylphosphino)-exo-3-bis(pentafluorophenyl)boryl-norbornane to give a persistent FLP-NO aminoxyl radical. This reaction follows a second-order rate law, first-order in [FLP] and first-order in [NO], and is markedly faster in toluene than in dichloromethane. By contrast, the NO oxidation of the phosphine base 2-(dimesitylphosphino)norbornene to the corresponding phosphine oxide follows a third-order rate law, first-order in [phosphine] and second-order in [NO]. Formation of the FLP-NO radical in toluene occurs with a ΔH(‡) of 13 kcal mol(-1), a feature that conflicts with the computation-based conclusion that NO addition to a properly oriented B/P pair should be nearly barrierless. Since the calculations show the B/P pair in the most stable solution structure of this FLP to have an unfavorable orientation for concerted reaction, the observed barrier is rationalized in terms of the reversible formation of a [B]-NO complex intermediate followed by a slower isomerization-ring closure step to the cyclic aminoxyl radical. This combined kinetics/theoretical study for the first time provides insight into mechanistic details for the activation of a diatomic molecule by a prototypical FLP.

Mechanistic insights into the formation of N2O by a nickel nitrosyl complex.

Reaction of [Ni(NO)(bipy)(Me2phen)][PF6] with 1 equiv of nitric oxide (NO) in CH2Cl2 results in the formation of N2O and [{(Me2phen)Ni(NO)}2(µ-η(1)-N:η(1)-O)-NO2)][PF6] (3), along with the known complex, [Ni(bipy)3][PF6]2 (4). The isolation of complex 3, which contains a nitrite ligand, demonstrates that the reaction of [Ni(NO)(bipy)(Me2phen)][PF6] with exogenous NO results in NO disproportionation and not NO reduction. Complex 3 could also be accessed by reaction of [Ni(NO)(Me2phen)][PF6] (5) with (Me2phen)Ni(NO)(NO2) (7) in good yield. Complexes 3, 5, and 7 were fully characterized, including analysis by X-ray crystallography in the case of 3 and 7. Furthermore, addition of 0.5 equiv of bipy to [Ni(NO)(bipy)][PF6] results in formation of the hyponitrite complex, [{(bipy)Ni(κ(2)-O2N2)}η(1):η(1)-N,N-{Ni(NO)(bipy)}2][PF6]2 (9), in modest yield. Importantly, the hyponitrite ligand in 9 is thought to form via coupling of two NO(-) ligands and not by coupling of a nucleophilic nitrosyl ligand (NO(-)) with an electrophilic nitrosyl ligand (NO(+)). X-ray crystallography reveals that complex 9 features a new binding mode of the cis-hyponitrite ligand.

Oxidation of alcohols and activated alkanes with Lewis acid-activated TEMPO.

The reactivity of MCl3(η(1)-TEMPO) (M = Fe, 1; Al, 2; TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) with a variety of alcohols, including 3,4-dimethoxybenzyl alcohol, 1-phenyl-2-phenoxyethanol, and 1,2-diphenyl-2-methoxyethanol, was investigated using NMR spectroscopy and mass spectrometry. Complex 1 was effective in cleanly converting these substrates to the corresponding aldehyde or ketone. Complex 2 was also able to oxidize these substrates; however, in a few instances the products of overoxidation were also observed. Oxidation of activated alkanes, such as xanthene, by 1 or 2 suggests that the reactions proceed via an initial 1-electron concerted proton-electron transfer (CPET) event. Finally, reaction of TEMPO with FeBr3 in Et2O results in the formation of a mixture of FeBr3(η(1)-TEMPOH) (23) and [FeBr2(η(1)-TEMPOH)]2(µ-O) (24), via oxidation of the solvent, Et2O.

Enediolate-dilithium amide mixed aggregates in the enantioselective alkylation of arylacetic acids: structural studies and a stereochemical model.

A combination of X-ray crystallography, (6)Li, (15)N, and (13)C NMR spectroscopies, and density functional theory computations affords insight into the structures and reactivities of intervening aggregates underlying highly selective asymmetric alkylations of carboxylic acid dianions (enediolates) mediated by the dilithium salt of a C2-symmetric chiral tetraamine. Crystallography shows a trilithiated n-butyllithium-dilithiated amide that has dimerized to a hexalithiated form. Spectroscopic studies implicate the non-dimerized trilithiated mixed aggregate. Reaction of the dilithiated amide with the dilithium enediolate derived from phenylacetic acid affords a tetralithio aggregate comprised of the two dianions in solution and the dimerized octalithio form in the solid state. Computational studies shed light on the details of the solution structures and afford a highly predictive stereochemical model.

Nitric oxide release from a nickel nitrosyl complex induced by one-electron oxidation.

Reaction of [Ni(NO)(bipy)][PF6] (2) with AgPF6 or [NO][PF6] in MeCN results in formation of [Ni(bipy)x(MeCN)y](2+) and release of NO gas in moderate yields. In contrast, the addition of the inner sphere oxidant Ph2S2 to 2 does not result in denitrosylation. Instead, the diphenyldisulfide adduct [{(bipy)(NO)Ni}2(µ-S2Ph2)][PF6]2 (3) is formed in good yield. However, oxidation of 2 with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) does results in cleavage of the Ni-NO bond and generation of NO. The metal-containing product, [(bipy)Ni(η(2)-TEMPO)][PF6] (4), can be isolated as an orange-brown solid in excellent yields. In the solid state, complex 4 contains a side-on bound TEMPO(-) ligand, which is characterized by a long N-O bond length [1.383(2) Å]. The contrasting reactivity of Ph2S2 and TEMPO likely relates to their different redox potentials, as Ph2S2 is a relatively weak oxidant. Finally, the addition of pyridine-N-oxide to 2 results in the formation of the adduct, [(bipy)Ni(NO)(ONC5H5)][PF6] (5). No evidence of NO release is observed in this reaction, probably because of the low one-electron (1e(-)) reduction potential of pyridine-N-oxide.

Charge transfer and blue shifting of vibrational frequencies in a hydrogen bond acceptor.

A comprehensive Raman spectroscopic/electronic structure study of hydrogen bonding by pyrimidine with eight different polar solvents is presented. Raman spectra of binary mixtures of pyrimidine with methanol and ethylene glycol are reported, and shifts in ν1, ν3, ν6a, ν6b, ν8a, ν8b, ν9a, ν15, ν16a, and ν16b are compared to earlier results obtained for water. Large shifts to higher vibrational energy, often referred to as blue shifts, are observed for ν1, ν6b, and ν8b (by as much as 14 cm(-1)). While gradual blue shifts with increasing hydrogen bond donor concentration are observed for ν6b and ν8b, ν1 exhibits three distinct spectral components whose relative intensities vary with concentration. The blue shift of ν1 is further examined in binary mixtures of pyrimidine with acetic acid, thioglycol, phenylmethanol, hexylamine, and acetonitrile. Electronic structure computations for more than 100 microsolvated structures reveal a significant dependence of the magnitude of the ν1 blue shift on the local microsolvation geometry. Results from natural bond orbital (NBO) calculations also reveal a strong correlation between charge transfer and blue shifting of pyrimidine's normal modes. Although charge transfer has previously been linked to blue shifting of the X-H stretching frequency in hydrogen bond donors, here, a similar trend in a hydrogen bond acceptor is demonstrated.

Formation of N2O from a nickel nitrosyl: isolation of the cis-[N2O2]2- intermediate.

Addition of 2,2'-bipyridine (bipy) to [Ni(NO)(bipy)][PF(6)] (1) results in formation of a rare five-coordinate nickel nitrosyl [Ni(NO)(bipy)(2)][PF(6)] (2). This complex exhibits a bent NO(-) ligand in the solid state. On standing in acetonitrile, 2 furnishes the NO coupled product, [Ni(κ(2)-O(2)N(2))(bipy)] (8) in moderate yield. Subsequent addition of 2 equiv of acetylacetone (H(acac)) to 8 results in formation of [Ni(acac)(2)(bipy)], N(2)O, and H(2)O. Preliminary mechanistic studies suggest that the N-N bond is formed via a bimetallic coupling reaction of two NO(-) ligands.

Tuning the reactivity of TEMPO by coordination to a Lewis acid: isolation and reactivity of MCl3(η1-TEMPO) (M = Fe, Al).

Addition of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) to MCl(3) (M = Fe, Al) results in the formation of MCl(3)(η(1)-TEMPO) [M = Fe (1), Al (2)]. Both 1 and 2 oxidize alcohols to generate ketones or aldehydes along with the reduced complexes MCl(3)(η(1)-TEMPOH) [M = Fe (3), Al (4)]. Complexes 1-4 were fully characterized, including analysis by X-ray crystallography. Additionally, control experiments indicated that neither MCl(3) (M = Al, Fe) nor TEMPO are capable of effecting the oxidation of alcohols independently.