Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials.

During the layer-by-layer (LBL) processing of polymer solar cells (PSCs), the swelling and molecule interdiffusion are essential for achieving precise, controllable vertical morphology, and thus efficient PSCs. However, the influencing mechanism of material properties on morphology and correlated device performance has not been paid much attention. Herein, a series of fluorinated/non-fluorinated polymer donors (PBDB-T and PBDB-TF) and non-fullerene acceptors (ITIC, IT-2F, and IT-4F) are employed to investigate the performance of LBL devices. The impacts of fluorine substitution on the repulsion and miscibility between the donor and acceptor, as well as the molecular arrangement of the donor/acceptor and the vertical distribution of the LBL devices are systematically explored by the measurement of donor/acceptor Flory-Huggins interaction parameters, spectroscopic ellipsometry, and neutron reflectivity, respectively. With efficient charge transfer due to the ideal vertical and horizon morphology properties, devices based on PBDB-TF/IT-4F exhibit the highest fill factors (FFs) as well as champion power conversion efficiencies (PCEs). With this guidance, high-performance LBL devices with PCE of 17.2%, 18.5%, and 19.1% are obtained by the fluorinated blend of PBDB-TF/Y6, PBDB-TF/L8-BO, and D18/L8-BO respectively.

Yanhusanines A-F, Isoquinoline-Derived Alkaloid Enantiomers from Corydalis yanhusuo and Their Biological Activity.

Six new pairs of isoquinoline alkaloid enantiomers, designated as yanhusanines A-F (1-6), were isolated from an aqueous extract of Corydalis yanhusuo tubers. The structures of these enantiomers were elucidated via physicochemical analysis and a variety of spectroscopic methods. All compounds were resolved into their enantiomers via chiral-phase HPLC, and their configurations were determined by DP4+ NMR calculation methods, specific rotations, and comparison of experimental and calculated ECD spectra. Compounds 1-6 bear a rare 9-methyl moiety, and compound 1 possesses a rare 1-oxa-6-azaspiro[4.5]decane core containing an N-CHO group. Compounds (+)-2, (-)-2, (+)-4, (-)-4, (+)-5, (-)-5, (+)-6, and (-)-6 exhibited selective inhibitory activities against human carboxylesterase (hCE2), in the IC50 value range of 2.0-13.2 µM.

Identification and expression profiling analysis of ascorbate peroxidase gene family in Actinidia chinensis (Hongyang).

Ascorbate peroxidase (APX) is one of the important antioxidant enzymes in the active oxygen metabolism pathway of plants and animals, especially it is the key enzyme to clear H2O2 in chloroplast and the main enzyme of vitamin C metabolism. However, knowledge about APX gene family members and their evolutionary and functional characteristics in kiwifruit is limited. In this study, we identified 13 members of the APX gene family in the kiwifruit (cultivar: Hongyang) genome according the APX proteins conserved domain of Arabidopsis thaliana. Phylogenetic analysis by maximum likelihood split these 13 genes into four groups. The APX gene family members were distributed on nine chromosomes (Nos. 4, 5, 11, 13, 20, 21, 23, 25, 28). Most of the encoded hydrophilic and lipid-soluble enzymes were predicted to be located in the cytoplasm, nucleus and chloroplast. Among them, AcAPX4, AcAPX5, AcAPX8, AcAPX12 were transmembrane proteins, and AcAPX8 and AcAPX12 had the same transmembrane domain. The gene structure analysis showed that AcAPXs were composed of 4-22 introns, except that AcAPX10 was intron-free. Multiple expectation maximization for motif elicitation program (MEME) analyzed 13 APX protein sequences of Actinidia chinensis and identified 10 conserved motifs ranging in length from 15 to 50 amino acid residues. Additionally, the predicted secondary structures of the main motifs consisted of α-helix and random coils. The gene expression of fruits in different growth stages and bagging treatment were determined by qRT-PCR. The results showed that 8 AcAPXs had the highest expression levels during the color turning period and only the gene expression of AcAPX3 was consistent with the ascorbic acid content; five AcAPXs were consistent with the ascorbic acid content after bagging. Our data provided evolutionary and functional information of AcAPX gene family members and revealed the gene expression of different members in different growth stages and bagging treatments These results may be useful for future studies of the structures and functions of AcAPX family members.

In-Situ Monitoring of a Filament Wound Pressure Vessel by the MWCNT Sensor under Hydraulic Fatigue Cycling and Pressurization.

As a result of the high specific strength/stiffness to mass ratio, filament wound composite pressure vessels are extensively used to contain gas or fluid under pressure. The ability to in-situ monitor the composite pressure vessels for possible damage is important for high-pressure medium storage industries. This paper describes an in-situ monitoring method to permanently monitor composite pressure vessels for their structural integrity. The sensor is made of a multi-walled carbon nanotube (MWCNT) that can be embedded in the composite skin of the pressure vessels. The sensing ability of the sensor is firstly evaluated in various mechanical tests, and in-situ monitoring experiments of a full-scale composite pressure vessel during hydraulic fatigue cycling and pressurization are performed. The monitoring results of the MWCNT sensor are compared with the strains measured by the strain gauges. The results show that the measured signal by the developed sensor matches the mechanical behavior of the composite laminates under various load conditions. In the hydraulic fatigue test, the relationship between the resistance and the strain is built, and could be used to quantitative monitor the filament wound pressure vessel. The bursting of the pressure vessel can be detected by the sharp increase of the MWCNT sensor resistance. Embedding the MWCNT sensor into the composite pressure vessel is successfully demonstrated as a promising method for structural health monitoring.

[Study on structural conversion of dihydrochelerythrine in different solvents].

Dihydrochelerythrine was isolated from the ethanol extract of Corydalis yanhusuo by chromatographic and recrystallization techniques. To our knowledge, this is the first report that dihydrochelerythrine was found to be unstable. The NMR, HPLC, and LC-MS were applied to monitor the structural conversion process of dihydrochelerythrine. The results showed that when dissolved in polar deuteration solvent (e.g., DMSO-d6 & MeOD), dihydrochelerythrine is directly converted to chelerythrine gradually. However, if used non-polar reagent (e.g.,CD2Cl2), the sample of dihydrochelerythrine undergoes the formation of pseudobase, chelerythrine, and bimolecular ether then followed by oxidation to oxychelerythrine as the major final product. Which leads to this phenomenon maybe is that the C-6 in dihydrochelerythrine is highly reactive to nucleophiles, and is easily converted to different derivatives in different solvents attributed to the solvent effect. This finding will contribute to the extraction and isolation, bioactivity screening, and quality evaluation of medicinal materials containing dihydrochelerythrine and other similar derivatives.

High Sensitivity Polymer Visible-Near Infrared Photodetectors via an Inverted Device Structure and Manipulation of Injection Barrier Height.

Visible-near infrared photodetectors are reported with excellent overall device parameters from conjugated polymers with different optical bandgaps by optimal design in device structure and optimizing the thickness of the photoactive layer in nanoscale. The best visible-near infrared photodetectors show high detectivity (D*) of 1.7 × 10(13) Jones at a wavelength of 710 nm, which is among one of the best results of polymer photodetectors reported to date.

Silver-promoted cinnamamidyl radical-mediated oxidative cascade cyclization: highly regioselective synthesis of phosphorylated azaspiro[4.5]decenones.

A silver-promoted oxidative cascade cyclization with a phosphorylation/1,5-aryl migration/desulfonylation/dearomatization process is presented here, providing an efficient method to synthesize azaspiro[4.5]decenones with high regioselectivity. The cinnamamidyl radical, which has rarely been reported before, plays a key role in this reaction.

Optimization of ICP-AES and ICP-MS Techniques for the Determination of Major, Minor and Micro Elements in Lichens.

Lichens are one of the best materials for air quality biomonitoring, and they have been widely used in atmospheric element deposition monitoring in many regions. Inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) are two efficient techniques widely used in quantifying and quantifying plant elements. However, elemental levels in lichens from some regions in China are much higher than in other plants, and their variation is highly dependent on space, time, species and elements. Although atmospheric pollution monitoring is urgently needed in China in recent decades, little studies have been performed on biomonitoring in the country. Therefore, the methodological studies on the determination of lichen elements in China are needed to accelerate future biomonitoring studies with lichens. Two techniques such as ICP-MS and ICP-AES were used to determine elements in four reference materials, as GBW10014 (cabbage), GBW10015 (spinach), GBW10052 (green tea) and IAEA-336 (lichen), with an attempt to reveal the effects of different digestions, sampling size, spectral lines, isotopes and internal standard elements on measured results. ICP-AES after dry ashing-alkali fusion digestion and ICP-MS after microwave digestion were optimized for lichen element determination. In the optimized techniques, good linear relationship (r>0.999 0), low detection limit, high analytic accuracy and precision were obtained. The optimized techniques were applied to lichen samples collected from Taihang Mountains of China and Ardley Island of Antarctica. The results show that all lichen samples from Taihang Mountains were much higher in elemental concentration with the contribution of atmospheric deposition higher than those from Antarctica. These results suggest the applicability of the techniques in determining lichen elements, and provide evidences and technique supports for air pollution biomonitoring in China.

Copper-catalyzed one-pot trifluoromethylation/aryl migration/carbonyl formation with homopropargylic alcohols.

A novel copper-catalyzed one-pot functionalization of homopropargylic alcohols that involves trifluoromethylation, aryl migration, and formation of a carbonyl moiety has been developed. This reaction constitutes the first direct conversion of homopropargylic alcohols into CF3-containing 3-butenal or 3-buten-1-one derivatives in a regioselective manner. Mechanistic studies indicate that the 1,4-aryl migration proceeds through a radical pathway.

Serum cystatin C, monocyte/high-density lipoprotein-C ratio, and uric acid for the diagnosis of coronary heart disease and heart failure.

BACKGROUND: Coronary heart disease (CHD) and heart failure (HF) are the major causes of morbidity and mortality worldwide. Early and accurate diagnoses of CHD and HF are essential for optimal management and prognosis. However, conventional diagnostic methods such as electrocardiography, echocardiography, and cardiac biomarkers have certain limitations, such as low sensitivity, specificity, availability, and cost-effectiveness. Therefore, there is a need for simple, noninvasive, and reliable biomarkers to diagnose CHD and HF. AIM: To investigate serum cystatin C (Cys-C), monocyte/high-density lipoprotein cholesterol ratio (MHR), and uric acid (UA) diagnostic values for CHD and HF. METHODS: We enrolled 80 patients with suspected CHD or HF who were admitted to our hospital between July 2022 and July 2023. The patients were divided into CHD (n = 20), HF (n = 20), CHD + HF (n = 20), and control groups (n = 20). The serum levels of Cys-C, MHR, and UA were measured using immunonephelometry and an enzymatic method, respectively, and the diagnostic values for CHD and HF were evaluated using receiver operating characteristic (ROC) curve analysis. RESULTS: Serum levels of Cys-C, MHR, and UA were significantly higher in the CHD, HF, and CHD + HF groups than those in the control group. The serum levels of Cys-C, MHR, and UA were significantly higher in the CHD + HF group than those in the CHD or HF group. The ROC curve analysis showed that serum Cys-C, MHR, and UA had good diagnostic performance for CHD and HF, with areas under the curve ranging from 0.78 to 0.93. The optimal cutoff values of serum Cys-C, MHR, and UA for diagnosing CHD, HF, and CHD+HF were 1.2 mg/L, 0.9 × 109, and 389 µmol/L; 1.4 mg/L, 1.0 × 109, and 449 µmol/L; and 1.6 mg/L, 1.1 × 109, and 508 µmol/L, respectively. CONCLUSION: Serum Cys-C, MHR, and UA are useful biomarkers for diagnosing CHD and HF, and CHD+HF. These can provide information for decision-making and risk stratification in patients with CHD and HF.

Postoperative abdominal herpes zoster complicated by intestinal obstruction: A case report.

BACKGROUND: Intestinal obstruction is a common occurrence in clinical practice. However, the occurrence of herpes zoster complicated by intestinal obstruction after abdominal surgery is exceedingly rare. In the diagnostic and treatment process, clinicians consider it crucial to identify the primary causes of its occurrence to ensure effective treatment and avoiding misdiagnosis. CASE SUMMARY: Herein, we present the case of a 40-year-old female patient with intestinal obstruction who underwent laparoscopic appendectomy and developed herpes zoster after surgery. Combining the patient's clinical manifestations and relevant laboratory tests, it was suggested that the varicella zoster virus reactivated during the latent period after abdominal surgery, causing herpes zoster. Subsequently, the herpes virus invaded the visceral nerve fibers, causing gastrointestinal dysfunction and loss of intestinal peristalsis, which eventually led to intestinal obstruction. The patient was successfully treated through conservative treatment and antiviral therapy and subsequently discharged from the hospital. CONCLUSION: Pseudo-intestinal obstruction secondary to herpes zoster infection is difficult to distinguish from mechanical intestinal obstruction owing to various causes. In cases of inexplicable intestinal obstructions, considering the possibility of a viral infection is essential to minimize misdiagnosis and missed diagnoses.

Clinical efficacy and mechanism study of mid-frequency anti-snoring device in treating moderate obstructive sleep apnea-hypopnea syndrome.

BACKGROUND: Obstructive sleep apnea-hypopnea syndrome (OSAHS) is primarily caused by airway obstruction due to narrowing and blockage in the nasal and nasopharyngeal, oropharyngeal, soft palate, and tongue base areas. The mid-frequency anti-snoring device is a new technology based on sublingual nerve stimulation. Its principle is to improve the degree of oropharyngeal airway stenosis in OSAHS patients under mid-frequency wave stimulation. Nevertheless, there is a lack of clinical application and imaging evidence. AIM: To investigate the clinical efficacy and mechanisms of a mid-frequency anti-snoring device in treating moderate OSAHS. METHODS: We selected 50 patients diagnosed with moderate OSAHS in our hospital between July 2022 and August 2023. They underwent a 4-wk treatment regimen involving the mid-frequency anti-snoring device during nighttime sleep. Following the treatment, we monitored and assessed the sleep apnea quality of life index and Epworth Sleepiness Scale scores. Additionally, we performed computed tomography scans of the oropharynx in the awake state, during snoring, and while using the mid-frequency anti-snoring device. Cross-sectional area measurements in different states were taken at the narrowest airway point in the soft palate posterior and retrolingual areas. RESULTS: Compared to pretreatment measurements, patients exhibited a significant reduction in the apnea-hypopnea index, the percentage of time with oxygen saturation below 90%, snoring frequency, and the duration of the most prolonged apnea event. The lowest oxygen saturation showed a notable increase, and both sleep apnea quality of life index and Epworth Sleepiness Scale scores improved. Oropharyngeal computed tomography scans revealed that in OSAHS patients cross-sectional areas of the oropharyngeal airway in the soft palate posterior area and retrolingual area decreased during snoring compared to the awake state. Conversely, during mid-frequency anti-snoring device treatment, these areas increased compared to snoring. CONCLUSION: The mid-frequency anti-snoring device demonstrates the potential to enhance various sleep parameters in patients with moderate OSAHS, thereby improving their quality of life and reducing daytime sleepiness. These therapeutic effects are attributed to the device's ability to ameliorate the narrowing of the oropharynx in OSAHS patients.

Isomerization of Benzothiadiazole Yields a Promising Polymer Donor and Organic Solar Cells with Efficiency of 19.0.

The exploration of high-performance and low-cost wide-bandgap polymer donors remains critical to achieve high-efficiency nonfullerene organic solar cells (OSCs) beyond current thresholds. Herein, the 1,2,3-benzothiadiazole (iBT), which is an isomer of 2,1,3-benzothiadiazole (BT), is used to design wide-bandgap polymer donor PiBT. The PiBT-based solar cells reach efficiency of 19.0%, which is one of the highest efficiencies in binary OSCs. Systemic studies show that isomerization of BT to iBT can finely regulate the polymers' photoelectric properties including i) increasing the extinction coefficient and photon harvest, ii) downshifting the highest occupied molecular orbital energy levels, iii) improving the coplanarity of polymer backbones, iv) offering good thermodynamic miscibility with acceptors. Consequently, the PiBT:Y6 bulk heterojunction (BHJ) device simultaneously reaches advantageous nanoscale morphology, efficient exciton generation and dissociation, fast charge transportation, and suppressed charge recombination, leading to larger VOC of 0.87 V, higher JSC of 28.2 mA cm-2, greater fill factor of 77.3%, and thus higher efficiency of 19.0%, while the analog-PBT-based OSCs reach efficiency of only 12.9%. Moreover, the key intermediate iBT can be easily afforded from industry chemicals via two-step procedure. Overall, this contribution highlights that iBT is a promising motif for designing high-performance polymer donors.

Copper-catalyzed trifluoromethylation-cyclization of enynes: highly regioselective construction of trifluoromethylated carbocycles and heterocycles.

Regioselective trifluoromethylation-cyclization: A method for copper-catalyzed trifluoromethylation-cyclization of simple enynes using the CC triple bond as a nucleophile is reported for the first time. The reaction proceeds efficiently in a highly regioselective manner to give various 5- or 6-exo-dig carbocycles and heterocycles in moderate to high yields.

Research on strain aging behavior of ultra-high strength dual-phase steel.

The bake hardening value is one of the vital strength indexes of dual-phase steel, representing the strengthening ability of materials after pre-strain and baking, playing an important role in vehicle safety and lightweight design. Studying and improving the strain aging mechanism of dual-phase steel helps one to understand the material characteristics and enhances its utilization value. However, the ultra-high strength dual-phase steel is often prone to fracture outside the gauge length of a tensile specimen of the bake hardening value test. No suitable theory explains the fundamental law of dislocation pinning during the saturation stage at present. This paper used FEA, DIC, SEM, TEM, internal friction, and metallographic methods to study the strain aging behavior of dual-phase steels under different pre-strain, bake time, and bake temperature conditions. The results show that the fracture outside the gauge length is related to factors such as the uneven distribution of pre-strain and the ultra-high upper yield strength. The rolling pin shape tensile specimen testing has successfully solved this testing problem. The measured results at the saturation stage of dislocation pinning are in good agreement with the fitting results of the dislocation pinning strengthen mechanism based on the probability event quantization assumption.

Evaluation of Plastic Deformation Considering the Phase-Mismatching Phenomenon of Nonlinear Lamb Wave Mixing.

Nonlinear guided elastic waves have attracted extensive attention owing to their high sensitivity to microstructural changes. However, based on the widely used second harmonics, third harmonics and static components, it is still difficult to locate the micro-defects. Perhaps the nonlinear mixing of guided waves can solve these problems since their modes, frequencies and propagation direction can be flexibly selected. Note that the phenomena of phase mismatching usually occur due to the lack of precise acoustic properties for the measured samples, and they may affect the energy transmission from the fundamental waves to second-order harmonics as well as reduce the sensitivity to micro-damage. Therefore, these phenomena are systematically investigated to more accurately assessing the microstructural changes. It is theoretically, numerically, and experimentally found that the cumulative effect of difference- or sum-frequency components will be broken by the phase mismatching, accompanied by the appearance of the beat effect. Meanwhile, their spatial periodicity is inversely proportional to the wavenumber difference between fundamental waves and difference- or sum-frequency components. The sensitivity to micro-damage is compared between two typical mode triplets that approximately and exactly meet the resonance conditions, and the better one is utilized for assessing the accumulated plastic deformations in the thin plates.

Hybrid Cycloalkyl-Alkyl Chain-Based Symmetric/Asymmetric Acceptors with Optimized Crystal Packing and Interfacial Exciton Properties for Efficient Organic Solar Cells.

Hybrid cycloalkyl-alkyl side chains are considered a unique composite side-chain system for the construction of novel organic semiconductor materials. However, there is a lack of fundamental understanding of the variations in the single-crystal structures as well as the optoelectronic and energetic properties generated by the introduction of hybrid side chains in electron acceptors. Herein, symmetric/asymmetric acceptors (Y-C10ch and A-C10ch) bearing bilateral and unilateral 10-cyclohexyldecyl are designed, synthesized, and compared with the symmetric acceptor 2,2'-((2Z,2'Z)-((12,13-bis(2-butyloctyl)-3,9 bis(ethylhexyl)-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″':4',5']thieno[2',3':4,5] pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10- diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (L8-BO). The stepwise introduction of 10-cyclohexyldecyl side chains decreases the optical bandgap, deepens the energy level, and enables the acceptor molecules to pack closely in a regular manner. Crystallographic analysis demonstrates that the 10-cyclohexyldecyl chain endows the acceptor with a more planar skeleton and enforces more compact 3D network packing, resulting in an active layer with higher domain purity. Moreover, the 10-cyclohexyldecyl chain affects the donor/acceptor interfacial energetics and accelerates exciton dissociation, enabling a power conversion efficiency (PCE) of >18% in the 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (Y6) (PM6):A-C10ch-based organic solar cells (OSCs). Importantly, the incorporation of Y-C10ch as the third component of the PM6:L8-BO blend results in a higher PCE of 19.1%. The superior molecular packing behavior of the 10-cyclohexyldecyl side chain is highlighted here for the fabrication of high-performance OSCs.

[Predictive value of HATCH score on atrial fibrillation recurrence post radiofrequency catheter ablation].

OBJECTIVE: To determine the predictive value of HATCH score on recurrence of atrial fibrillation (AF) after radiofrequency catheter ablation (RFCA). METHODS: The data of 123 consecutive AF patients (74 paroxysmal and 49 persistent AF) who underwent RFCA between April 2009 and December 2010 in our department were retrospectively analyzed. Of theses patients, 65 (52.9%) patients had HATCH score = 0, 41 (33.3%) patients had HATCH score = 1, and 17 (13.8%) patients had HATCH score ≥ 2 (HATCH = 2 in 11 patients, HATCH = 3 in 5 patients, HATCH = 4 in 1 patient). The recurrence was defined as atrial tachyarrhythmia lasting more than 30 seconds after 3 months post RFCA. The patients were divided into recurrence group and no recurrence group. Relationship between HATCH score and recurrence was observed. RESULTS: There were 43 cases in recurrence group and 80 cases in no recurrence group. After 12 months follow-up, HATCH score was significant higher in recurrence group than in non-recurrence group [(0.91 ± 0.94) score vs. (0.53 ± 0.80) score, P < 0.05]. The ratio of patients with HATCH ≥ 2 in recurrence group was higher than in non-recurrence group [23.3% (10/43) vs. 8.8% (7/80), P < 0.01]. The sensitivity and specificity of HATCH ≥ 2 to define the risk of recurrence was 25.0%, 92.4% respectively. Cumulative non-recurrence rate of patients with HATCH score ≥ 2 was lower than patients with HATCH score = 0 and 1 (P < 0.05). CONCLUSION: Higher HATCH score is associated with increased risk of AF recurrence post RFCA.

NUV-pumped red-emitting Ca9MnK(PO4)7 phosphor: energy transfer and charge compensation.

The development of novel Mn-based phosphor hosts has received increasing interest in the search for highly efficient red emitting phosphors for white LED applications. In this study, Ca9MnK(PO4)7, a compound with the ß-Ca3(PO4)2-type structure, was successfully synthesized by a high-temperature solid-state reaction process. The Eu2+-doped Ca9MnK(PO4)7 phosphor exhibits a broadband red emission peaking at 650 nm. The optimal excitation wavelength is 395 nm, which matches that of commercial ultraviolet (NUV) chips. Codoping Ce3+ ions into the Ca9MnK(PO4)7:Eu2+ phosphor efficiently improves Mn2+ luminescence. Here, Ce3+ acts as a charge compensator rather than a sensitizer and substantially increases the effective number of Eu2+ and finally improves the red emission of Mn2+. The charge compensation mechanism is also verified by codoping some optically inert rare earth ions (Ln3+) including Y3+, La3+ and Gd3+. The results demonstrate that these developed Ca9MnK(PO4)7:Eu2+, Ln3+ phosphors have great potential for application in NUV-based white LEDs. The energy transfer approach combined with the charge compensation technique is valuable for improving the performance of the red-emitting Ca9MnK(PO4)7:Eu2+ phosphor, which can further be used in developing other Mn-based phosphors.

Effects of Involuntary and Voluntary Exercise in Combination with Acousto-Optic Stimulation on Adult Neurogenesis in an Alzheimer's Mouse Model.

Single-factor intervention, such as physical exercise and auditory and visual stimulation, plays a positive role on the prevention and treatment of Alzheimer's disease (AD); however, the therapeutic effects of single-factor intervention are limited. The beneficial effects of these multifactor combinations on AD and its molecular mechanism have yet to be elucidated. Here, we investigated the effect of multifactor intervention, voluntary wheel exercise, and involuntary treadmill running in combination with acousto-optic stimulation, on adult neurogenesis and behavioral phenotypes in a mouse model of AD. We found that 4 weeks of multifactor intervention can significantly increase the production of newborn cells (BrdU+ cells) and immature neurons (DCX+ cells) in the hippocampus and lateral ventricle of Aß oligomer-induced mice. Importantly, the multifactor intervention could promote BrdU+ cells to differentiate into neurons (BrdU+ DCX+ cells or BrdU+ NeuN+ cells) and astrocytes (BrdU+GFAP+ cells) in the hippocampus and ameliorate Aß oligomer-induced cognitive impairment and anxiety- and depression-like behaviors in mice evaluated by novel object recognition, Morris water maze tests, elevated zero maze, forced swimming test, and tail suspension test, respectively. Moreover, multifactor intervention could lead to an increase in the protein levels of PSD-95, SYP, DCX, NeuN, GFAP, Bcl-2, BDNF, TrkB, and pSer473-Akt and a decrease in the protein levels of BAX and caspase-9 in the hippocampal lysates of Aß oligomer-induced mice. Furthermore, sequencing analysis of serum metabolites revealed that aberrantly expressed metabolites modulated by multifactor intervention were highly enriched in the biological process associated with keeping neurons functioning and neurobehavioral function. Additionally, the intervention-mediated serum metabolites mainly participated in glutamate metabolism, glucose metabolism, and the tricarboxylic acid cycle in mice. Our findings suggest the potential of multifactor intervention as a non-invasive therapeutic strategy for AD to anti-Aß oligomer neurotoxicity.