Optimal Treatment Parameters for Ultrasound-Stimulated Microbubbles in Upregulating Proliferation and Stemness of Bone Marrow Mesenchymal Stem Cells.

OBJECTIVES: Ultrasound-targeted microbubble disruption (UTMD) is a widely used technique to improve the differentiation and proliferation capacity of mesenchymal stem cells (MSCs), but the optimal therapeutic parameters for UTMD are unclear. In this study, we aimed to find the appropriate peak negative pressure (PNP), which is a key parameter for enhancing the stemness properties and proliferation of MSCs. METHODS: Experiments were performed in UTMD group, ultrasound (US) group under different PNP exposure conditions (0.5, 1.0, and 1.5 MPa), and control group. Apoptosis safety was analyzed by flow cytometry and MSC proliferation was measured at 12, 24, and 36 hours after irradiation by cell counting kit 8. The expression of the stemness genes NANOG, OCT-4, and SOX-2 were determined by enzyme-linked immunosorbent assay (ELISA) or reverse transcription polymerase chain reaction. RESULTS: The results showed that the 1.5 MPa UTMD-treated group had the highest proliferation capacity of MSCs at 24 hours. ELISA or quantitative reverse transcription polymerase chain reaction results showed that UTMD treatment of the 1.5 MPa group significantly upregulated the expression of the stemness genes NANOG, SOX-2, and OCT-4. CONCLUSIONS: In conclusion, the appropriate peak PNP value of UTMD was 1.5 MPa, and 1.5 MPa-mediated UTMD group obviously promoted MSCs proliferation and maintained stemness by upregulating the expression of stemness genes.

Soil potentially toxic element pollution at different urbanization intensities: Quantitative source apportionment and source-oriented health risk assessment.

Potentially toxic element (PTE) pollution of urban soils has become the focus of social concern, but the differences of the sources, pollution levels and source-oriented human health risks (HHR) of PTE in urban soils among different urban intensity areas is rarely known. This study explored a comprehensive scheme that combined positive matrix factorization model and source-oriented assessment to quantitatively assess the priority pollution sources and HHR in urban soils from areas with different urbanization intensities. All the average values for PTE concentrations, except for Cr, were higher than their corresponding background values. The contributions made by the four sources (atmospheric deposition, agricultural activities, traffic activities, and natural sources) were relatively similar (22.29-29.89%) in the low urbanization intensity (LUI) area, whereas traffic activities and atmospheric deposition made the greatest contributions in the medium urbanization intensity (MUI) (29.12%) and the high urbanization intensity (HUI) (38.97%) areas, respectively. The geo-accumulation index results revealed that Cd was the most polluting element and the HUI area had the highest pollution levels. The content-oriented assessment of HHR demonstrated that the non-carcinogenic risks were acceptable, but the carcinogenic risks were unacceptable. According to the source-oriented HHR assessment, among the anthropogenic activities, atmospheric deposition contributed the most to carcinogenic risk of children in all areas, and atmospheric deposition, traffic activities and agricultural activities contributed the most to the carcinogenic risk of adults in HUI, MUI and LUI, respectively. This suggest that control measures need to be tailored to the appropriate urbanization intensity to effectively curb PTE pollution caused by anthropogenic activities.

Green remediation of Ni, Zn, and Cu in an electroplating contaminated site by wood vinegar with optimization and risk assessment.

Wood vinegar (WV) is a renewable organic compound, possessing characteristics such as high oxygenated compound content and low negative impact on soil. Based on its weak acid properties and complexing ability to potentially toxic elements (PTEs), WV was used to leach Ni, Zn, and Cu contaminated soil in electroplating sites. In addition, the response surface methodology (RSM) based on the Box-Behnken design (BBD) was established to clarify the interaction between each single factor, and finally completed the risk assessment of the soil. The amounts of PTEs leached from the soil climbed with the increase of WV concentration, liquid-solid ratio, and leaching time, while they surged with the decrease of pH. Under optimal leaching circumstances (the concentration of WV= 100 %; washing time= 919 min; pH= 1.00), the removal rates of Ni, Zn, and Cu could reach 91.7 %, 57.8 %, and 65.0 %, respectively, and the WV-extracted PTEs were mainly from the Fe-Mn oxides fraction. After leaching, the Nemerow integrated pollution index (NIPI) decreased from an initial value of 7.08 (indicating severe pollution) to 0.450 (indicating no pollution). The potential ecological risk index (RI) dropped from 274 (medium level) to 39.1 (low level). Additionally, the potential carcinogenic risk (CR) values reduced by 93.9 % for both adults and children. The results revealed that the washing process significantly reduced the pollution level, potential ecological risk, and health risk. Coupled with FTIR and SEM-EDS analysis, the mechanism of WV removal of PTEs could be explained from three aspects: acid activation, H+ ion exchange, and functional group complexation. In summary, WV is an eco-friendly and high-efficiency leaching material for the remediation of PTEs polluted sites, which will maintain soil function and protect human health.

Rape Straw Supported FeS Nanoparticles with Encapsulated Structure as Peroxymonosulfate and Hydrogen Peroxide Activators for Enhanced Oxytetracycline Degradation.

Iron-based catalysts with high load content of iron sulfide (FeS) were commonly peroxymonosulfate (PMS) and hydrogen peroxide (H2O2) activators to degrade organic pollutants but limited catalytic efficiency and increased risk of ferrous ion leaching restricted their use. Meanwhile, various biomass materials such as straw, peel, and branch have been extensively prepared into biochar for mechanical support for iron-based catalysts; however, the preparation process of biochar was energy-intensive. In this study, FeS nanoparticles modified rape straw composites (RS-FeS) encapsulated with ethylenediaminetetraacetic acid (RS-EDTA-FeS) were successfully presented by in-situ synthesis method for efficiently activating PMS and H2O2 to degrade oxytetracycline (OTC), which was economical and environmentally friendly. The results showed that the modified rape straw can remove OTC efficiently, and the addition of EDTA also significantly enhanced the stability and the reusability of the catalyst. In addition, EDTA also promoted the activation of H2O2 at neutral pH. The OTC degradation efficiency of the two catalysts by PMS was faster than that of H2O2, but H2O2 had a stronger ability to remove OTC than PMS. The highest OTC removal efficiency of RS-FeS and RS-EDTA-FeS were 87.51 and 81.15%. O2•- and 1O2 were the major reactive oxidative species (ROS) in the PMS system. Furthermore, compared with RS-FeS, the addition of EDTA inhabited the generation of O2•- in the PMS system. Instead, O2•- and •OH were the major ROS in the H2O2 system, but 1O2 was also identified in RS-FeS/H2O2 system. RS-EDTA-FeS showed a trend of rising first and then decreasing in recycle test. Instead, the removal rate of OTC by RS-FeS decreased significantly with the increase in reuse times. In the actual wastewater test, the TOC removal of two catalysts active by H2O2 was better than PMS, which was consistent with the test results of OTC, indicating that the two catalysts have application value in the removal of organic pollutants in actual wastewater. This study directly used plant materials as catalysts and omits the preparation process of biochar, greatly reduces the preparation cost and secondary pollution of catalysts, and provides theoretical support for the deepening of advanced oxidation technology.

Assessing the risk of human exposure to bioaccessible arsenic from total diet through market food consumption in Chengdu, China.

To assess the daily intake of total arsenic (tAs) and arsenic speciation and their potential health risks, different food groups, including vegetables, rice, meat, viscera, freshwater fish, and seafood from Chengdu, China were analyzed. The concentrations of tAs ranged from 41.3 to 1185 µg kg-1 with a median of 238 µg kg-1, and 26.0% of tAs in the food groups was of inorganic toxic form. The median concentration of As(V) in rice (184 ± 21.6 µg kg-1) was approximately 2 to 6 times higher than those in other food groups. The bioaccessible inorganic arsenic (iAs) concentrations of the food items obtained from the local markets of Chengdu ranged from 1.07 to 24.6 µg kg-1 (mean of 6.04 µg kg-1). Rice contributed toward the largest amount of daily iAs intake (66.2%). The mean daily iAs intake from vegetable, meat and viscera contributed 10.7%, 12.5% and 6.04% of total iAs intake, respectively. The actual concentration of arsenic in the food exposed to the human body depends on oral bioaccessible fraction. The oral bioaccessibility estimated daily intake (µg kg-1 bw d-1) of tAs and iAs for the residents of Chengdu was 0.32 and 0.16. Health risk assessments carried out based on bioaccessible iAs concentrations showed that the food items were safe for consumption from the iAs perspective.

Response of microbiomes with different abundances to removal of metal fractions by soil washing.

Toxic metal contamination causes a great threat to soil ecosystem and human health. Soil washing is a fast practice for removing metals, but its influences on microbial diversity and the stability of soil ecosystem remain unknown. In this study, ethylenediaminetetraacetic acid (EDTA), citric acid (CA), and fermented pineapple peel residue (FPP) were used as representatives of chelates, low molecular organic acids and biological materials to wash Pb-polluted soils, and their impacts on microbial community were investigated. Washing with these agents effectively removed Pb, but altered microbial community structure. After washing with EDTA, CA, and FPP, 3-8 bacterial phyla and 1 fungal phylum greatly increased, while 7-20 bacterial and 0-6 fungal phyla severely decreased or even disappeared. The alterations of different microbiomes were closely related to soil metal fractions. The labile metal fraction had negative effects on most bacteria and fungi, but also showed positive influences on Actinobacteria, Patescibacteria, and Fusobacteria. The moderately stable and stable fractions were nontoxic to the most microbes, but still harmful to Patescibacteria and Deinococcus-Thermus. These findings provide new insights for the effects of soil washing remediation and toxicity of metal fractions on the microbiomes with different abundance.

Polycyclic aromatic hydrocarbons in street dust from different functional areas in Chengdu, China: seasonal variation and health risk assessment.

This is the first investigation that identified seasonal variation, possible sources and health risk of 16 PAHs in street dust sampled park area (PA), educational area (EA), commercial area (CA), residential area (RA), and traffic area (TA) of Chengdu, one of the new first-tier cities in China. The total PAHs (∑16PAHs) concentrations of averaging over two seasons varied from 2.15 to 10.6 mg/kg with a median value of 4.61 mg/kg and in winter (5.48 ± 1.52 mg/kg) were significantly higher than that in summer (4.04 ± 0.91 mg/kg). The highest ∑16PAHs concentration was found in TA (median 6.74 mg/kg). Statistical analysis results indicated that mixture sources of petroleum combustion and combustion of biomass and coal seem to be the primary source of the PAHs in street dust. Carcinogenic risk by incremental lifetime cancer risk (ILCR) model for PAHs in street dust indicates an acceptable potential cancer risk for residents. The same sequences of cancer risk to be observed for both children and adults among different functional areas: TA > CA > EA > RA > PA. The results provided advice for habitants in Chengdu to encourage outdoor activities in parks and residential areas and minimize traffic areas and commercial areas.

Removal of lead, zinc and cadmium from contaminated soils with two plant extracts: Mechanism and potential risks.

Screening appropriate washing agents to remediate soils contaminated with heavy metals is crucial for decreasing metal hazards posing to environment and human health. In this study, two plant washing agents-water-extracted from Fagopyrum esculentum and Fordiophyton faberi, were applied to remove soil Pb, Zn, and Cd by washing. Results indicated that metal removals augmented with increase of washing solution concentrations, decreased with increasing pH values of the solution and followed the pseudo-second-order model depending on contact duration. At concentration of 50 g/L, pH 3 and contact duration of 120 min, F. esculentum had higher removals of Pb (5.98-6.83%), Zn (21.82-27.94%), and Cd (39.90-40.74%) than those of F. faberi. And metal ions could be removed by binding with carboxyl, hydroxyl, amide, amine and aromatic groups in washing solutions. The potential risks of residual metals declined by 51.35-52.12% for mine soil and 48.51-49.96% for farmland soil with exchangeable and carbonate-bound fractions obviously extracted after a single washing (P < 0.05). And soil organic carbon and nutrients increased to some extent except for total phosphorus and available potassium. Moreover, soil phytotoxicity lowered except that some adverse effects on seed germination existed. Therefore, the water extract from F. esculentum is a promising washing agent for heavy metal removal.

Effect of temperature and duration of pyrolysis on spent tea leaves biochar: physiochemical properties and Cd(II) adsorption capacity.

We analyzed the effects of pyrolysis temperature and duration on the physiochemical properties and Cd(II) adsorption capacity of spent tea leaves (STL) biochar. The STL biochar was produced by pyrolysis at 300, 400, 500 and 600 °C for 1 and 2 h. The pyrolysis temperature was positively correlated to the ash content, pH, electrical conductivity, specific surface area (SBET), pore volume (PV) and C content, and negatively with the total yield, O, H and N content, and the O/C and H/C atomic ratios. Furthermore, the surface porosity of STL biochar increased, the density of oxygen-containing functional groups decreased, and the formation of aromatic structures was enhanced at higher pyrolysis temperatures. The adsorption of Cd(II) onto STL biochar fitted with the pseudo-second-order kinetics and Langmuir isotherms model. The STL biochar produced at 600 °C for 2 h showed the maximum Cd(II) adsorption capacity of 97.415 mg/g. In addition, Cd(II) adsorption was mainly physical and occurred in monolayers. Thus, STL biochar is a suitable low-cost adsorbent for wastewater treatment.

Feasibility of nanoscale zero-valent iron to enhance the removal efficiencies of heavy metals from polluted soils by organic acids.

Soil washing with natural chelators to remediate metal-contaminated soils has been gained attention by researchers. However, the abilities of the chelators to remediate the multiple metal polluted soils are less effective. This study employed zero-valent iron nanoparticle (nZVI) to enhance the removal efficiencies of citric (CA), tartaric (TA) and oxalic acids (OA), and evaluate their feasibility. Results showed that metal removal efficiencies increased with the increasing concentration of nZVI and soil-liquid ratio, decreased with the increasing solution pH. The kinetic simulation indicated that pseudo-first-order and pseudo-second-order models could be used for describing the washing processes. Additionally, metal removals were significantly improved by addition of nZVI (p < 0.05). The highest enhancements of soil Cd, Pb and Zn removals under solution pH of 4.0, soil-liquid ratio of 1:20 and washing time of 120 min reached 12.83% (OA- nZVI), 24.92% (CA-nZVI) and 11.64% (OA- nZVI) for mine soil, and 19.24% (TA- nZVI), 18.16% (CA-nZVI) and 8.93% (OA- nZVI) for farmland soil, respectively. After soil washing, the exchangeable forms and the environmental risks of residual metals were markedly diminished in soils. Therefore, the combinations of the organic acids and nZVI are the feasible practices to repair the soils contaminated by heavy metals.

Subcellular distribution, chemical forms and thiol synthesis involved in cadmium tolerance and detoxification in Siegesbeckia orientalis L.

Siegesbeckia orientalis L. is a promising species for cadmium (Cd) phytoextraction with large biomass and fast growth rate, while little information about their intracellular mechanisms involved in Cd tolerance and detoxification has been explored. A soil pot experiment with total target Cd concentrations of 0, 10, 50, 100, and 150 mg kg-1 were designed to investigate the subcellular distribution, chemical forms and thiol synthesis characteristics of Cd in S. orientalis. More than 90% of Cd was bound to the soluble fractions (48.4-76.5%) and cell walls (19.9-46.3%). Increasing soil Cd concentrations enhanced Cd sequestration into the cell walls. Most of the Cd (69.8-82.7%) in the plant organ was mainly in the forms of pectate and protein integrated Cd and undissolved Cd phosphate, while a minor portion (6.8-20.9%) was in the forms of the inorganic Cd and the water soluble Cd. Nonprotein thiols and phytochelatins significantly increased with increasing soil Cd treatment levels, while glutathione concentrations had no obvious change trends. Therefore, intracellular detoxification mechanisms of Cd in S. orientalis mainly rely on formation of less toxic Cd chemical forms, store of a large amount of Cd in cell wall and synthesis of thiol compounds.

Feasibility of four wastes to remove heavy metals from contaminated soils.

Soil washing is one of the permanent techniques to remove heavy metals, and washing agent is a key influence factor for this technique, but there is still lack of high-efficiency, eco-friendly, and inexpensive agents. In this study, four wastes including pineapple peel (PP), soybean straw (SS), broad bean straw (BBS) and tea residue (TR) were employed to remove cadmium (Cd), lead (Pb) and zinc (Zn) in contaminated soils. The Fourier transform infrared spectroscopy (FTIR) analysis indicated that hydroxyl, carboxyl, amine, carbonyl and amide groups were involved in the interaction with metal ions by complexation or ion exchange. We then investigated the influences of various conditions including washing solution concentration, pH, and washing time. The metal removal efficiencies with these agents increased as the concentration augmented from 5 to 80 g L-1, decreased or presented an asymmetric V-shaped curve with increasing pH from 2.5 to 7.5, and fit intraparticle diffusion or Elovich model with washing time increasing. PP has the highest removals for Cd (90.1%), Pb (18.6%), and Zn (15.2%) in soil A, and 85.8, 24.8, and 69.4% in soil B, respectively. The relatively high metal removal was mainly attributed to effective removal of the exchangeable and acid soluble fractions. Moreover, single washing not only lowered the potential ecological risk of the heavy metals, but moderated the effects on soil chemical properties. Therefore, PP was a feasible washing agent to remediate soils contaminated by heavy metals.

Enhanced simultaneous removal of phosphate and ammonium from swine wastewater using magnetic magnesium-loaded Chinese herbal medicine residues: Performance, mechanism, and resource utilization.

Magnetic magnesium (Mg)-loaded Chinese herbal medicine residues (MM-TCMRs) were fabricated to simultaneously remove and recover phosphate and ammonium from wastewater. The MM-TCMRs exhibited larger specific surfaces and rougher structures with massive spherical particles than those of original residues. They could be separated by adjusting the magnetic field. The phosphate and ammonium adsorption by MM-TCMRs were matched with the pseudo-second-order model, while the Langmuir model yielded the maximum adsorption capacities of 635.35 and 615.57 mg g-1, respectively. Struvite precipitation on the MM-TCMRs surface was the primary removal mechanism with electrostatic attraction, ligand exchange, intra-particle diffusion, and ion exchange also involved. The recyclability of MM-TCMRs confirmed their good structural stability. More importantly, the nutrient-loaded MM-TCMRs enhanced alfalfa growth and improved soil fertility in planting experiments. Collectively, the MM-TCMRs are promising candidates for nutrient removal and recovery from wastewater.

Nonflammable superhydrophobic passive cooling Cellulose-CaCO3 film.

Energy consumption from air cooling systems in summer, water scarcity in hot regions, and the functional reusability of waste paper are emerging environmental problems. Finding solutions to these problems simultaneously remains a significant challenge. Herein, a superhydrophobic passive cooling Cellulose-CaCO3 film with hierarchical nano-sheets was fabricated to realize daytime radiative cooling with a temperature drop of 15-20 °C in summer and water harvesting with harvesting efficiency of 387 mg cm-2h-1 bd utilization of recycled waste paper. The superhydrophobic Cellulose-CaCO3 film demonstrates its self-cleaning properties against inorganic and organic pollutants. Furthermore, the superhydrophobicity of the film was maintained after base/acid corrosions, dynamic water flushing, and thermal treatment at 100 °C for 7 h, exhibiting good durability of the superhydrophobicity. Moreover, the superhydrophobic Cellulose-CaCO3 film is nonflammable after exposure to fire combustion for 1 min. In addition to waste paper, waste maize straws, and pasteboards were also collected to produce superhydrophobic passive cooling films. Results indicate that the above three cellulose-based raw materials can be well used to prepare durable superhydrophobic passive cooling materials. Environmental toxicology assessments confirm the safety of the material. This study not only provides a protocol for preparing superhydrophobic materials; but also demonstrates their potential for passive cooling and water harvesting.

Inhibition of high sulfur on functional microorganisms and genes in slightly contaminated soil by cadmium and chromium.

It is generally accepted that sulfur can passivate the bioavailability of heavy metals in soil, but it is not clear whether high sulfur in cadmium (Cd) and chromium (Cr) contaminated soil has negative effect on soil microbial community and ecological function. In this study, total sulfur (TS) inhibited the Chao 1, Shannon, Phylogenetic diversity (Pd) of bacterial and Pd of fungi in slightly contaminated soil by Cd and Cr around pyrite. TS, total potassium, pH, total chromium, total cadmium, total nitrogen, soil organic matter were the predominant factors for soil microbial community; the contribution of TS in shaping bacterial and fungal communities ranked at first and fifth, respectively. Compared with the low sulfur group, the abundance of sulfur sensitive microorganisms Gemmatimonas, Pseudolabrys, MND1, and Schizothecium were decreased by 68.79-97.22% (p < 0.01) at high sulfur one; the carbon fixation, nitrogen cycling, phosphorus cycling and resistance genes abundance were significantly lower (p < 0.01) at the latter. Such variations were strongly and closely correlated to the suppression of energy metabolism (M00009, M00011, M00086) and carbon fixation (M00173, M00376) functional module genes abundance in the high sulfur group. Collectively, high sulfur significantly suppressed the abundances of functional microorganisms and functional genes in slightly contaminated soil with Cd and Cr, possibly through inhibition of energy metabolism and carbon fixation of functional microorganisms. This study provided new insights into the environmental behavior of sulfur in slightly contaminated soil with Cd and Cr.

Effects of climate and geochemical properties on the chemical forms of soil Cd, Pb and Cr along a more than 4000 km transect.

Soil heavy metal speciation has received much attention for their different ecological and environmental effects. However, the effects of climate and soil geochemical properties on them in uncontaminated soils at macroscale were still unclear. Therefore, a transect more than 4000 km was chosen to study the effects of these factors on soil Cd, Pb and Cr forms. The results revealed that mean annual temperature and precipitation showed significant positive relations with the exchangeable and Fe-Mn oxide bound states of Cd, Pb and Cr, and residual Cr. And humidity and drought indexes were significantly positively correlated with their organic and carbonate bound forms, respectively. As for soil geochemical properties, pH displayed significant negative relationships with exchangeable, Fe-Mn oxide and organic bound Pb and Cr, and exchangeable Cd. Fe2O3 was significantly positively with the exchangeable and Fe-Mn oxide bound Cd, Pb and Cr, and residual Cr. And soil organic matter showed positive relations with organic bound Pb and Cr, and residual Cd and Cr, displayed negative relationships with carbonated bound Pb and Cr. Overall, climate and soil geochemical properties together affect the transformation and transport of heavy metals between different forms in uncontaminated soils.

Ecological and human health hazards of soil heavy metals after wildfire: A case study of Liangshan Yi autonomous prefecture, China.

Soil samples were collected in at different depths from the conflagration area in Liangshan Yi Autonomous Region, China, to investigate the distribution characteristics and ecological and human health risks of heavy metals after a wildfire. The samples collected comprise wildfire ash (WA) above the soil surface, ash soil (AS) 0-5 cm, and plain soil (PS) 5-15 cm below the soil surface. Additionally, reference soil (RS) was collected from a nearby unburned area at the same latitude as the conflagration area. The results showed that the concentrations of zinc (Zn), copper (Cu), lead (Pb), and cadmium (Cd) in the WA and AS were significantly higher than in reference soil (RS) (p < 0.05). Concentrations of Pb in the PS were 2.52 times higher than that in RS (17.9 mg kg-1) (p < 0.05). The AS and WA had the highest Index of potential ecological risks (RI > 600). In addition, The Cd in AS and WA contributed the most to the highest Improved nemerow index (INI) and RI with a contribution of more than 80%. The concentration of heavy metals was used to establish non-carcinogenic effects and cancer risks in humans via three exposure pathways: accident ingestion of soil, dermal contact with soil, and inhalation of soil particles. Hazard index (HI) values of each sample were all less than 1, indicating the non-carcinogenic risk was within the acceptable range and would not adversely affect the local population's health. The Cancer risk (CR) values of Cr, As, Cd, and Ni were all below 1 × 10-6, indicating that heavy metal pollution from this wildfire did not pose a cancer risk to residents.

Simultaneous imaging of lung structure and function with triple-nuclear hybrid MR imaging.

PURPOSE: To re-engineer a standard clinical magnetic resonance (MR) imaging system to enable the acquisition, in the same breath hold, of lung images from two hyperpolarized gases (helium 3 [(3)He] and xenon 129 [(129)Xe]) with simultaneous registered anatomic proton (hydrogen 1 [(1)H]) MR images of lung structure. MATERIALS AND METHODS: Studies with (3)He and (129)Xe were performed with National Research Ethics Committee approval, with informed consent from the volunteer. (1)H-(3)He-(129)Xe MR imaging was achieved in the same breath by using mutually decoupled nested radiofrequency coil hardware capable of transmit and receive on each respective nucleus without power cross talk. MR pulse sequences were also developed for rapid switching between each nucleus. The system is demonstrated with triple-nuclear lung images in a healthy individual following inhalation of a mixture of (3)He and (129)Xe gases. RESULTS: Spatially and temporally registered images of all three nuclei were obtained with high signal to noise ratio and high spatial resolution in the same breath. CONCLUSION: The multinuclear technique is capable of providing registered lung images with mutually complementary functional and structural spatial information.

A novel bio-washing eluent obtained from fermentation of fruit wastes for removal of soil Pb: efficiency, mechanism, and risk assessment.

Agricultural wastes are inexpensive materials for soil remediation. However, the direct water extracts from these wastes showed low efficiency for Pb removal, thus limiting their application. In this study, citrus pericarp (CP) and pineapple peel (PP), as the common agricultural wastes, were inoculated with lactic acid bacteria to produce fermentation liquors (FCP and FPP) for improving Pb removal efficiency. Results showed that the Pb removal rates by FCP and FPP reached 37.3 and 43.6%, and increased by almost 50.0% than those by CP and PP. The ecological risk of Pb reduced by 83.0-88.2% after five times continuous washing with FCP and FPP, and the Pb concentrations conformed to soil remediation standard of China. Moreover, soil organic carbon 1.5 times increased in the washed soils, while total potassium improved by 40.7-68.0%. The mechanisms of Pb removal by these wastes involved in adsorption-desorption of Pb2+, complexation with organic ligands, and co-precipitation of Pb complexes. The increase of low molecular organic acids during the fermentation promoted dissolution of Pb and provided more hydroxyl, carboxyl, and amine groups to interact with Pb2+, thus improving its removal rate. Therefore, fermentation liquid from fruit wastes is a novel, effective, and ecofriendly bio-washing eluent for Pb removal from contaminated soils.

Cadmium-resistant phosphate-solubilizing bacteria immobilized on phosphoric acid-ball milling modified biochar enhances soil cadmium passivation and phosphorus bioavailability.

Cadmium (Cd) can accumulate in agriculture soil from the regular application of phosphorus (P) fertilizer. Microbiological method is considered as a potentially effective strategy that can not only remediate the Cd-contaminated soil but also provide the phosphorus needed for crop growth. However, the toxicity of Cd may affect the activity of microorganisms. To solve this problem, Klebsiella variicola with excellent phosphate solubilization ability (155.30 mg L-1 at 48 h) and Cd adsorption rate (90.84 % with 10 mg L-1 Cd initial concentration) was firstly isolated and identified in this study. Then, a phosphoric acid and ball milling co-modified biochar (PBC) was selected as the carrier to promote the activities of K. variicola under Cd pollution. Surface characterization revealed that the promotion of K. variicola by PBC was mainly attributed to the large specific surface area and diverse functional groups. Compared to contaminated soil, microbial PBC (MPBC) significantly increased the pakchoi biomass and phosphorus (P) content, while the Cd content in leave and root of pakchoi (Brassica chinensis L.) decreased by 25.90-43.46 % (P < 0.05). The combined application also favored the transformation of the resistant P fractions to bioavailable P, and facilitated the immobilization of 20.12 % exchangeable Cd to reducible, oxidizable, and residual Cd in the treated soil. High-throughput sequencing revealed that the response of the soil microbial community to the MPBC was more beneficial than K. variicola or PBC alone. Therefore, the application of MPBC has the potential to act as an efficient, stable, and environmentally friendly sustainable product for Cd remediation and enhanced P bioavailability in agricultural production.