Persistent Luminescence Nanoplatform for Autofluorescence-Free Tracking of Submicrometer Plastic Particles in Plant.

The uptake of plastic particles by plants and their transport through the food chain make great risks to biota and human health. Therefore, it is important to trace plastic particles in the plant. Traditional fluorescence imaging in plants usually suffers significant autofluorescence background. Here, we report a persistent luminescence nanoplatform for autofluorescence-free imaging and quantitation of submicrometer plastic particles in plant. The nanoplatform was fabricated by doping persistent luminescence nanoparticles (PLNPs) onto polystyrene (PS) nanoparticles. Cr3+-doped zinc gallate PLNP was employed as the dopant for autofluorescence-free imaging due to its persistent luminescence nature. In addition, the Ga element in PLNP was used as a proxy to quantify the PS in the plant by inductively coupled plasma mass spectrometry (ICP-MS). Thus, the developed nanoplatform allows not only dual-mode autofluorescence-free imaging (persistent luminescence and laser-ablation ICP-MS) but also ICP-MS quantitation for tracking PS in plant. Application of this nanoplatform in a typical plant model Arabidopsis thaliana revealed that PS mainly distributed in the root (>99.45%) and translocated very limited (<0.55%) to the shoot. The developed nanoplatform has great potential for quantitative tracing of submicrometer plastic particles to investigate the environmental process and impact of plastic particles.

Size-Dependent Deformation and Competition H-Bond Site-Induced Individual Fluorescence Response of a Single-Crystal Three-Dimensional Covalent Organic Framework.

Understanding the individual fluorescence response mechanism of covalent organic frameworks (COFs) at a single-crystal level is of great significance for the rational design of COF-based microsensors but unreachable because all previous COF-based sensors are performed with average fluorescence response behavior of various sized polycrystalline COFs. Herein, we design to explore the fluorescence response of a monodisperse single-crystal COF and further reveal the individual heterogeneity of the response mechanism. Three-dimensional single-crystal COF-301 (SCOF-301) with an intramolecular H-bond-induced excited-state intramolecular proton-transfer effect is selected as a proof-of-concept SCOF. With ethanol, benzene, and ammonia as model analytes, three different deformation and competition H-bond site-induced fluorescence response mechanisms related to crystal size are revealed. Small single particles of SCOF-301 (SSCOF-301) exhibit a more flexible structure, leading to the dominant role of deformation in the fluorescence response of small-sized SSCOF-301. The decreasing flexibility of SSCOF-301 with the increase of crystal size results in involvement of competition of the H-bond site to the fluorescence response besides deformation. Further increase of the crystal size makes the large-sized SSCOF-301 difficult to deform; thus, the competition of the H-bond site dominates the fluorescence response. This work provides a deep understanding of the individual fluorescence response mechanism of COFs to guide the design of a functional COF sensor with suitable size and mechanism for different structural analytes.

Pore Size Adjustment Strategy for the Fabrication of Molecularly Imprinted Covalent Organic Framework Nanospheres at Room Temperature for Selective Extraction of Zearalenone in Cereal Samples.

Covalent organic frameworks (COFs) are attractive adsorbents for sample pretreatment due to their unique structure and properties. However, the selectivity of COFs for the extraction of hazardous compounds is still limited due to the lack of specific interactions between COFs and targets. Herein, we report a pore size adjustment strategy for room-temperature synthesis of molecularly imprinted COF (MICOF) for selective extraction of zearalenone (ZEN) in complex food samples. The three-dimensional building block tetra(4-aminophenyl) methane was used as a functional monomer, while dialdehyde monomers with different numbers of benzene ring were used to adjust the pore size of MICOF to match with the size of ZEN molecules. The prepared MICOF gave the largest adsorption capacity of 177.2 mg g-1 and the highest imprinting factor of 10.1 for ZEN so far. MICOF was used as the adsorbent for dispersed solid-phase extraction in combination with high-performance liquid chromatography for the determination of trace ZEN in cereals. The high selectivity of the developed method allows simple aqueous standard calibration for the matrix effect-free determination of ZEN in food samples. The limit of detection and the recoveries of the developed method were 0.21 µg kg-1 and 93.7-101.4%, respectively. The precision for the determination of ZEN was less than 3.8% (RSD, n = 6). The developed method is promising for the selective determination of ZEN in complex matrices.

Afterglow Performance of Phenylenevinylene-Based Semiconducting Polymer Nanoparticles Doped with Photosensitizers Containing Electron-Withdrawing Groups.

It is usually believed that doping with photosensitizers capable of generating singlet oxygen (1O2) plays a pivotal role in enhancing the afterglow performance of semiconducting polymer nanoparticles (SPNs). However, the effect of doping photosensitizer bearing electron-withdrawing groups has not been reported. Here we report the effect of doping with six photosensitizers possessing different electron-withdrawing groups on the afterglow performance of SPNs using poly[(9,9-di(2-ethylhexyl)-9H-fluo-rene-2,7-vinylene)-co-(1-methoxy-4-(2-ethylhexyloxy)-2,5-phenylenevinylene)] (PF-MEHPPV) as substrate. It was found that the afterglow performance of SPNs was significantly influenced by doping with photosensitizers bearing electron-withdrawing groups. For the doped photosensitizers with strong electron-withdrawing groups, the stronger the electron-withdrawing ability of the group, the worse of the afterglow performance of the SPN regardless of the 1O2 generation ability of the photosensitizer. When the doped photosensitizer exhibited weak or none electron-withdrawing effect, the 1O2 generation ability of the photosensitizer played a dominant role on the afterglow performance of the SPNs. This work deepens the understanding of the design and synthesis of SPNs with different afterglow properties.

Organic Mass Cytometry Discriminating Cycle Stages of Single Cells with Small Molecular Indicators.

Cell cycle is a significant factor toward cellular heterogeneity, so cell cycle discrimination is a precise measurement on the top of single-cell analysis. Single-cell analysis based on organic mass spectrometry has received great attention for its unique ability to profile single-cell metabolome, but the influence of cell cycle on cellular metabolome heterogeneity has been overlooked until now due to the lack of a compatible cell cycle discrimination method. Here, we report a robust protocol based on the combination of three small molecular indicators, consisting of two small molecular labels (Hoechst and docetaxel) and one cellular endogenous compound [phosphocholine (34:1)], to discriminate single cells at different cycle stages in real time by organic mass cytometry. More than 6000 HeLa cells were acquired by an improved organic mass cytometry system to build a cell cycle differentiation model. The model successfully discriminated single HeLa cells, SCC7, and Hep G2 cells, at G0/G1, S, and G2/M stages with larger than 85% sensitivity and larger than 89% specificity. Along with cell cycle discrimination, obvious heterogeneity of amino acids, nucleotides, energy metabolic intermediates, and phospholipids was observed among single cells at different cycle stages by this protocol, further demonstrating the necessity of cell cycle discrimination for cellular metabolome heterogeneity research and the potential of more endogenous small molecular compounds for cell cycle discrimination.

Particle Size Regulation of Single-Crystalline Covalent Organic Frameworks for High Performance of Gas Chromatography.

Although polycrystalline covalent organic frameworks (PCOFs) have already shown great potential as stationary phases for chromatography, irregular shape and size distribution of PCOFs make regulation of particle size of PCOFs for high separation performance impossible, which is accessible by the application of single-crystalline COFs (SCOFs). Herein, we showed preparation of three-dimensional SCOF (SCOF-303) bonded capillaries (SCOF-303-capillary) with different particle sizes (about 0.4-1.6 µm) and further investigated gas chromatographic separation ability of these SCOF-303-capillaries for isomers of xylene, dichlorobenzene, and pinene. It was found resolution and column efficiency of SCOF-303-capillaries for isomers decreased with the increase in particle size, mainly resulting from the weaker size-exclusion effect and higher mass transfer resistance of the larger particle size of flexible SCOF-303. The obtained SCOF-303-capillary (particle size of ∼0.4 µm) offered baseline separation of xylene isomers with the high resolution of 2.26-3.52, great efficiency of 7879 plates m-1 for p-xylene, better than PCOF-303-capillary, and commercial DB-5 and HP-FFAP capillary columns as well as many reported capillaries. This work not only shows the great potential of SCOFs for gas chromatography but also provides the theoretical direction for the design of the efficient COF based stationary phase by adjusting the particle sizes.

Quasi-Homogeneous and Hierarchical Electronic Textiles with Porosity-Hydrophilicity Dual-Gradient for Unidirectional Sweat Transport, Electrophysiological Monitoring, and Body-Temperature Visualization.

On-skin electronics based on impermeable elastomers and stacking structures often suffer from inferior sweat-repelling capabilities and severe mechanical mismatch between sub-layers employed, which significantly impedes their lengthy wearing comfort and functionality. Herein, inspired by the transpiration system of vascular plants and the water diode phenomenon, a hierarchical nonwoven electronic textile (E-textile) with multi-branching microfibers and robust interlayer adhesion is rationally developed. The layer-by-layer electro-airflow spinning method and selective oxygen plasma treatment are utilized to yield a porosity-hydrophilicity dual-gradient. The resulting E-textile shows unidirectional, nonreversible, and anti-gravity water transporting performance even upon large-scale stretching (250%), excellent mechanical matching between sub-layers, as well as a reversible color-switching ability to visualize body temperature. More importantly, the conducting and skin-conformal E-textile demonstrates accurate and stable detecting capability for biomechanical and bioelectrical signals when applied as an on-skin bioelectrode, including different human activities, electrocardiography, electromyogram, and electrodermal activity signals. Further, the E-textile can be efficiently implemented in human-machine interfaces to build a gesture-controlled dustbin and a smart acousto-optic alarm. Hence, this hierarchically-designed E-textile with integrated functionalities offers a practical and innovative method for designing comfortable and daily applicable on-skin electronics.

Integrating Ordered Two-Dimensional Covalent Organic Frameworks to Solid-State Nanofluidic Channels for Ultrafast and Sensitive Detection of Mercury.

Grafting specific recognition moieties onto solid-state nanofluidic channels is a promising way for selective and sensitive sensing of analytes. However, the time-consuming interaction between recognition moieties and analytes is the main hindrance to the application of nanofluidic channel-based sensors in rapid detection. Here, we show the integration of ordered two-dimensional covalent organic frameworks (2D COFs) to solid-state nanofluidic channels to achieve rapid, selective, and sensitive detection of contaminants. As a proof of concept, a thiourea-linked 2D COF (JNU-3) as the recognition unit is covalently bonded on the stable artificial anodic aluminum oxide nanochannels (AAO) to fabricate a JNU-3@AAO-based nanofluidic sensor. The rapid and selective interaction of Hg(II) with the highly ordered channels of JNU-3 allows the JNU-3@AAO-based nanofluidic sensor to realize ultrafast and precise determination of Hg(II) (90 s) with a low limit of detection (3.28 fg mL-1), wide linear range (0.01-100 pg mL-1), and good precision (relative standard deviation of 3.8% for 11 replicate determination of 10 pg mL-1). The developed method was successfully applied to the determination of mercury in a certified reference material A072301c (rice powder), real water, and rice samples with recoveries of 90.4-99.8%. This work reveals the great potential of 2D COFs-modified solid-state nanofluidic channels as a sensor for the rapid and precise detection of contaminants in complicated samples.

Ratiometric Luminescence Aptasensor Based on Dual-Emissive Persistent Luminescent Nanoparticles for Autofluorescence- and Exogenous Interference-Free Determination of Trace Aflatoxin B1 in Food Samples.

Sensitive and accurate determination of aflatoxin B1 (AFB1) is of great significance to food safety and human health as it is recognized as the most toxic mycotoxin and carcinogenic. Herein, we report a ratiometric luminescence aptasensor based on dual-emissive persistent luminescent nanoparticles (PLNP) for the accurate determination of trace AFB1 in complex food samples without autofluorescence and exogenous interference. Dual-emissive PLNP ZnGa2O4:Cr0.0001 was prepared first and acted as the donor for energy transfer as well as the signal unit with phosphorescence at 714 and 508 nm (the detection and the reference signal, respectively). AFB1 aptamer was then bonded on the surface of PLNP to offer specific recognition ability. Aptamer complementary DNA modified with Cy5.5 was employed as the acceptor for energy transfer and the quenching group to eventually develop a turn-on ratiometric luminescence aptasensor. The developed ratiometric luminescence aptasensor combined the merits of long-lasting luminescence, in situ excitation and autofluorescence-free of PLNP, exogenous interference-free and self-calibration reading of ratiometric sensor, as well as the high selectivity of aptamer, holding great promise for accurate determination of trace AFB1 in complex matrix. The developed ratiometric aptasensor exhibited excellent linearity (0.05-70 ng mL-1), low limit of detection (0.016 ng mL-1), and good precision (2.3% relative standard deviation for 11 replicate determination of 1 ng mL-1 AFB1). The proposed ratiometric aptasensor was successfully applied for the determination of AFB1 in corn, wheat, peanut, millet, oats, and wheat kernels with recoveries of 95.1-106.5%.

Chiral covalent organic framework-monolith as stationary phase for high-performance liquid chromatographic enantioseparation of selected amino acids.

The separation of amino acid (AA) enantiomers shows significance for chemistry, food, and biology, but remains challenging due to their similar properties. A promising nanoporous chiral covalent organic framework (COF) as a stationary phase for high-performance liquid chromatography (HPLC) suffers from the irregularity and widely distributed particle size of the chiral COF. Herein, we show the facile preparation of a chiral COF-monolith as a stationary phase for HPLC enantiomeric separation of AAs via orthogonal experiments. The CTzDa-monolith is prepared by the incorporation of the model chiral COF named CTzDa into the porous poly(ethylene dimethacrylate-co-methacrylate) monolith and reveals great permeability and mechanical stability. The corresponding CTzDa-monolithic column gives better chiral HPLC separation of AAs than the commercial Poroshell 120 chiral-T column. Thermal dynamic analysis and molecular docking calculations imply the involvement of stereoscopic hydrogen, π-π, and van der Waals interactions between the CTzDa and AAs during HPLC enantioseparation. The facile incorporation of the chiral COF into the porous monolith will promote the potential of a chiral COF as a stationary phase for HPLC.

Nanothorn Filter-Facilitated Online Cell Lysis for Rapid and Deep Intracellular Profiling by Single-Cell Mass Spectrometry.

Mass spectrometry combined with flow cytometry is emerging for high-throughput single-cell metabolite analysis but still has problems with limited intracellular information coverage. Here, we show a simple and efficient all-in-one system integrating cell injection, cell extraction, online cell lysis, analyte ionization, and mass spectrometric detection for rapid single-HeLa-cell screening with in-depth profiling of cellular metabolites and drugs. Zinc oxide nanothorn-decorated filters with three bore sizes (5.22, 8.36, and 16.75 µm) were fabricated for efficient online lysis of the cell membrane (even nuclear membrane) to facilitate intracellular analyte release and demonstrated to have a size effect for potential subcellular discrimination. The two smaller-bore filters gave 2-11-fold improvements in signal response for representative intracellular metabolites, such as adenosine, glutamine, and leucine/isoleucine. Especially, the smallest-bore filter enabled successful detection of the metabolites in the nucleus, including tetrahydrobiopterin and cyclic guanosine monophosphate. The developed all-in-one system was explored to monitor the uptake of four anticancer drugs, including 5-fluorouracil, doxorubicin, gambogic acid, and paclitaxel in single cells, and further to investigate the drug uptake trends at the subcellular level. The all-in-one system integrates the merits of high-throughput single-cell screening and in-depth intracellular information profiling and is promising for high-coverage single-cell metabolome analysis to serve cell biology research and cancer research.

Aptamer Self-Assembly-Functionalized Nanochannels for Sensitive and Precise Detection of Chloramphenicol.

Sensitive and precise determination of chloramphenicol (CAP) is of great significance for human health due to its high risk in trace amounts. Solid-state artificial nanochannels are expected to be highly promising sensing devices owing to single-molecule sensitivity, target-specific selectivity, and portability. Herein, we report an aptamer self-assembly-functionalized artificial nanochannel-based sensor for highly sensitive and precise determination of CAP. Aptamer self-assembly (AAs) served as the specific recognition component and were in situ grown on the surface of stable anodic aluminum oxide (AAO) nanochannels to develop an AAs@AAO nanochannel-based sensor. Selective interaction with CAP led to the disassembly of AAs and sensitive current change of AAs@AAO nanochannels, allowing sensitive and precise sensing of CAP in complex food samples. The developed AAs@AAO nanochannel-based sensor showed a wide linear range from 0.32 to 1600 pg. mL-1, low limit of detection (LOD) of 0.1 pg. mL-1, high precision with relative standard deviation of 2.9%, and quantitative recoveries of 93.4-102.2% for CAP in milk, milk powder, and honey samples. This work proposes a versatile nanochannel-based platform for facile, sensitive, and precise sensing of hazardous residues in food samples.

Functionalized Persistent Luminescence Nanoparticle-Based Aptasensor for Autofluorescence-free Determination of Kanamycin in Food Samples.

Selective and sensitive determination of trace kanamycin in complex food samples is of great importance for food safety because of its high toxicity. Here, we report a sensitive and autofluorescence-free persistent luminescence (PL) aptasensor for selective, sensitive, and autofluorescence-free determination of kanamycin in food samples. The aptamer for kanamycin was first conjugated onto the surface of magnetic nanoparticles Fe3O4 to serve as the recognition unit as well as the separation element, while the PL nanoparticles ZnGa2O4:Cr (PLNPs) were functionalized with the aptamer complementary DNA (cDNA) as the PL signal. The PL aptasensor consisted of the aptamer-conjugated MNPs (MNPs-apt) and cDNA-functionalized PLNPs (PLNPs-cDNA) and combined the merits of the long-lasting luminescence of PLNPs, the magnetic separation ability of MNPs as well as the selectivity of the aptamer, offering a promising approach for autofluorescence-free determination of kanamycin in food samples. The proposed aptasensor showed excellent linearity in the range from 1 pg mL-1 to 5 ng mL-1 with a limit of detection of 0.32 pg mL-1. The precision for 11 replicate determinations of 100 pg mL-1 kanamycin was 3.1% (relative standard deviation). The developed aptasensor was applied for the determination of kanamycin in milk and honey samples with the recoveries of 95.4-106.3%. The proposed aptasensor is easily extendable to other analytes by simply replacing the aptamer, showing great potential as a universal aptasensor platform for selective, sensitive, and autofluorescence-free detection of hazardous analytes in food samples.

Dual-Emissive Persistent Luminescence Nanoparticle-Based Charge-Reversible Intelligent Nanoprobe for Persistent Luminescence-Ratio Bioimaging along with Chemo-Photothermal Synergic Therapy.

Persistent luminescence nanoparticles (PLNPs) hold great promise for bioimaging owing to no demand for in situ excitation and negligible tissue autofluorescence interference. Nevertheless, huge challenges remain in the further development of single-emissive PLNPs due to the great variation of luminescence with time after excitation ceases. Herein, we report the controllable fabrication of dual-emissive monodispersed PLNPs (ZnGa2O4:Cr) by a surfactant-assisted hydrothermal method in combination with postcalcination for bioimaging. The prepared PLNPs emit luminescence at 508 and 714 nm with a constant luminescence ratio (I508/I714) for more than 1 h after UV excitation stops. Moreover, the prepared PLNPs give a constant I508/I714 ratio signal after repeated excitation by a LED lamp, allowing luminescence ratio imaging to ensure the long-term accuracy for in vivo imaging. In vivo ratio imaging demonstrates the potential of the prepared PLNPs for precision bioimaging. In addition, the prepared PLNPs have been applied to fabricate a theranostic nanoprobe with intelligent tumor-targeted imaging and chemo-photothermal synergistic therapy to further reveal their unique advantage for imaging guided therapy. We believe that the dual-emissive PLNPs will provide a promising nanoplatform for bioimaging and biomedical applications.

Effect of Topology on Photodynamic Sterilization of Porphyrinic Metal-Organic Frameworks.

Porphyrinic metal-organic frameworks (MOFs) are promising photosensitizers due to the lack of self-aggregation of porphyrin in aqueous solution. However, how the topology of porphyrinic MOFs affects the generation of singlet oxygen (1 O2 ) is unclear. Here, the effect of the topology of porphyrinic MOFs on their photodynamic performance is reported. Four porphyrinic zirconium MOFs (MOF-525, MOF-545, PCN-223 and PCN-224 with different topologies: ftw, csq, shp and she, respectively) were selected to study the influence of topology on the photodynamic antibacterial performance. The 1 O2 generation and the photodynamic antibacterial performance followed an decreasing order of MOF-545>MOF-525>PCN-224>PCN-223. The results reveal that the pore size, the distance between porphyrin, and the number of porphyrin per Zr6 O8 cluster in MOFs greatly affected 1 O2 generation. This work provides guidance for designing new MOFs for efficient photodynamic sterilization.

pH-Responsive Torpedo-Like Persistent Luminescence Nanoparticles for Autofluorescence-Free Biosensing and High-Level Information Encryption.

Persistent luminescent nanoparticles (PLNPs) with intrinsic stimuli-responsive properties are desirable because of no autofluorescence background and natural responsive luminescence. However, the stimuli-responsive features of pure PLNPs have been unexplored. Here we show a facile one-pot hydrothermal synthesis of green-emitting Zn2 GeO4 :Mn2+ ,Pr3+ nanoparticles (ZGMP) with regular shape, uniform size and good afterglow luminescent performance. We also report the pH stimuli-responsive luminescent behavior of ZGMP and its possible mechanism. Taking the intriguing feature of pH responsive persistent luminescence, we explore ZGMP as autofluorescence-free probes to achieve stimuli-activated signal switch for biosensing by integrating enzyme catalysis reaction mediated pH modulation. The pH-responsive persistent luminescence also makes ZGMP promising for high-level information encryption.

pH-Driven Targeting Nanoprobe with Dual-Responsive Drug Release for Persistent Luminescence Imaging and Chemotherapy of Tumor.

Multifunctional nanoprobes with both imaging and drug delivery capabilities represent an emerging approach to the diagnosis and treatment of tumor. However, poor accumulation in tumor cells and low drug availability are the main limitations for their further application. Here we show a pH-driven targeting nanoprobe with dual-responsive drug release for persistent luminescence imaging and chemotherapy of tumor. The nanoprobe is constructed by conjugating the pH-low-insertion-peptide (pHLIP) to the surface of the core-shell structure of mesoporous silica-coated persistent luminescence nanoparticles (MSPLNPs) with the peptide GFLG and disulfide bond as bridges. The pHLIP functionalized nanoprobe exhibits higher cellular uptake for A549 and HepG2 cells in an acidic extracellular microenvironment (pH < 6.5) than in normal physiological condition (pH 7.4). The nanoprobe possesses well-defined NIR persistent luminescence performance and can be effectively accumulated in the tumor site, leading to the visual HepG2 tumor target imaging without autofluorescence interference. Furthermore, the nanoprobe realizes the dual-responsive release of doxorubicin loaded in the mesoporous channels in systems containing cathepsin B and glutathione, and can effectively kill tumor cells and inhibit the growth of tumor. This integrated nanoprobe possesses great potential for the diagnosis and treatment of tumors with high specificity and efficiency.

Emerging porous materials in confined spaces: from chromatographic applications to flow chemistry.

Searching for porous materials that can be employed as solid stationary phases for chromatographic separations, porous membrane matrixes and solid supports for catalysis has become an active research area. Strategies for embedding emerging porous materials in columnar systems and their subsequent applications (separation and catalysis) have been developed, which benefit from the remarkable progress in the discovery and development of porous materials based on metal-organic coordination or dynamic covalent bonding such as metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), porous organic cages, and porous organic polymers. In this review, porous materials that have been confined within capillary columns as packed, monolithic and open tubular columns are discussed. Progress in chromatographic separation and continuous flow catalytic synthesis is reviewed according to three major strategies. Applications of porous materials in membrane-separation fibre membrane systems and microfluidic devices with various functions are also highlighted.

Irreversible Amide-Linked Covalent Organic Framework for Selective and Ultrafast Gold Recovery.

Design of stable adsorbents for selective gold recovery with large capacity and fast adsorption kinetics is of great challenge, but significant for the economy and the environment. Herein, we show the design and preparation of an irreversible amide-linked covalent organic framework (COF) JNU-1 via a building block exchange strategy for efficient recovery of gold. JNU-1 was synthesized through the exchange of 4,4'-biphenyldicarboxaldehyde (BA) in mother COF TzBA consisting of 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline (Tz) and BA with terephthaloyl chloride. The irreversible amide linked JNU-1 gave good stability, unprecedented fast kinetics, excellent selectivity and outstanding adsorption capacity for gold recovery. X-ray photoelectron spectroscopy along with thermodynamic study and quantum mechanics calculation reveals that the excellent performance of JNU-1 for gold recovery results from the formation of hydrogen bonds C(N)-H⋅⋅⋅Cl and coordinate interaction of O and Au. The rational design of irreversible bonds as both inherent linkage and functional groups in COFs is a promising way to prepare stable COFs for diverse applications.

p-Bromophenol-Enhanced Bienzymatic Chemiluminescence Competitive Immunoassay for Ultrasensitive Determination of Aflatoxin B1.

Aflatoxin B1 (AFB1) contamination is one of the most critical global issues in food safety. The high carcinogenic nature necessitates rapid and specific methods for the determination of AFB1 in foodstuffs at ultratrace levels. Here, we report an enhanced bienzymatic chemiluminescence competitive immunoassay for ultrasensitive and high-throughput determination of AFB1. In this assay, protein G was first coated on the wells of a microplate for recognizing the Fc fragment of anti-AFB1 mAbs to reduce the antibody dosage and guarantee high immunological reaction efficiency. The target AFB1 competed with glucose oxidase labeled AFB1 for the limited anti-AFB1 mAbs in the wells of the microplate. p-Bromophenol was employed as an enhancer to obtain intense and long-lasting chemiluminescence. The utilization of an enhancer and bienzymatic catalysts effectively improved the detection sensitivity. The developed method offered a good linearity over 5 orders of magnitude, a detection limit of 5 pg L-1, and a relative standard deviation of 1.9% for AFB1. The application of the developed method to the analysis of grain samples gave quantitative recoveries from 94.0% to 97.0%. The developed method provides a universal platform for high-throughput, ultrasensitive, and high specific detection of pollutants or nutrients in foods.