Partial replacement of saturated fats in liver pâté by an olive oil-in-water emulsion containing ß-glucan shows no compromise in sensory and storage oxidation of lipids and protein.

BACKGROUND: The consumption of olive oil has been shown to have a positive effect on preventing obesity and hypertension. At the same time, it is recommended to avoid processed meat products as they contain saturated fats. The inclusion of highly unsaturated lipids in food products can lead to rapid oxidation and deterioration of sensory characteristics. The objective of the current work was to encapsulate olive oil and incorporate it into traditional Polish liver pâté. The oil-in-water emulsions were formulated with varying levels of oat ß-glucan and were evaluated for droplet size, pH, encapsulation efficiency and rheology. The liver pâtés made using the emulsions with and without ß-glucan were then evaluated for pH, texture, colour, lipid and protein oxidation, thermal stability and sensory properties. RESULTS: The results showed that the oil-in-water emulsions had a 100% encapsulation rate of olive oil after 30 days of storage at 4 °C, regardless of the presence of ß-glucan. Although the texture of the emulsion-enriched liver pâté was different from that of the control, this difference was reduced when ß-glucan was added to the emulsion and then to the pâté matrix. CONCLUSION: Replacing 50% of animal fat with an olive oil emulsion enriched with ß-glucan did not result in any compromise of sensory properties, increase lipid or protein oxidation. These results suggest that it is possible to replace saturated lipids with omega-3-rich olive oil. © 2024 Society of Chemical Industry.

Microwave applications in the food industry: an overview of recent developments.

Microwave radiation has the ability to heat a material with dielectric properties. Material absorbs microwave energy and then converts it into heat, which gives the possibility of a wide use of microwaves in many industry sectors or agricultural sciences. Microwaves are especially widely used in food industry. The main objective of this paper is to present an overview of recent development regarding microwave applications in food industry. Many techniques in food processing (pasteurization, sterilization, drying, thawing, blanching and stunning) are assisted by microwave energy. It should be mentioned also the use of microwaves in nutrients and nutraceuticals production. Waste generation is an integral part of food production. Microwaves have also application in wastes management. The results of experiments, factors affecting heating and their practical application have been discussed. Many cases have been compared with conventional process methods. The use of microwaves shows many advantages. The most important aspect is shortening the time of the thermal process (even by 50%) and reducing the costs of the operation. In addition, it allows to increase the efficiency of processes while maintaining high quality. The examples of microwave applications given in the article are environmentally- friendly because the conditions of thermal processing allow for reducing the use of solvents and the amount of sewage by decreasing the demand for water. It is anticipated that microwaves will become increasingly popular, with the development of new microwave technologies solving many problems in the future.

Characterization of edible collagen casings in comparison with the ovine casing and their effect on sausage quality.

BACKGROUND: Bovine hide underlayer is used to manufacture collagen casings for sausage production. Edible collagen casings and natural ovine casing (as a reference) were chosen for analysis. The collagen casings (intended for: A - breakfast sausages, B - scalded sausages and C - dried sausages) were manufactured with the use of glyoxal as a cross-linking agent. The casings properties along with the quality of the sausages manufactured in those casings was analyzed. RESULTS: Casing A had a higher swelling capacity and water solubility, a* and b* color parameters, and wet elongation at break values, as well as a lower shrinking temperature. The remaining mechanical and water parameters were comparable to other collagen casings. The ovine casing contained more water, and was redder and less yellow compared to the collagen casings, whereas swelling, solubility and water vapor permeability were higher. The sausages in casing A were the softest and had the highest a* and b* color parameters. The results of the sensory analysis indicate that the sausages in casing B exhibited the highest quality on a three-point scale among the tested sausages and were also the most acceptable for judges. The ovine casing was graded as the hardest during cutting and also when in the mouth. CONCLUSION: By contrast to the producer's descriptions, the collagen casings were similar with respect to many properties. The differences between sausages in collagen casings were not so distinct as might be expected. Despite our expectations, the sausages in the natural casing were not rated as the best compared to sausages in collagen casings in the sensory analysis. © 2021 Society of Chemical Industry.

Active biopolymer films based on furcellaran, whey protein isolate and Borago officinalis extract: characterization and application in smoked pork ham production.

BACKGROUND: The meat industry is determined to find biodegradable packaging with properties similar to plastic. Furcellaran (FUR) and whey protein isolate (WPI) were used as a film matrix in which Borago officinalis extract (BOE) was incorporated as an antioxidant compound. The film's mechanical properties, water behavior, surface color, and antioxidant power were analyzed.Smoked hams were manufactured using two different types of film application: cured meat covered with film, smoked and cooked or hamsafter smoking, cooking and cooling. Smoked, vacuum packed ham was used as a control sample. The products were stored at 4 °C for 21 days and analyzed every 7 days. RESULTS: The elongation at break (EAB) and tensile strength (TS) of FUR/WPI films without the extract were 6.30% and 20.59 MPa, respectively, and after incorporating BOE, the EAB and TS were 24.30% and 15.33 MPa, respectively. The films with BOE were darker and had greater antioxidant capacity. The water content and activity in the products with films decreased along with storage time while the control remained stable. The results of microbiological, oxidation product accumulation, and sensory analysis were comparable in all the products. CONCLUSIONS: The smoking time can be reduced due to the dark color of the hams covered with BOE film. The barrier properties of those films should be increased. Other parameters were comparable to plastic packaging. The films therefore have the potential to be used instead of plastic packaging in the meat industry. © 2020 Society of Chemical Industry.

Heavy metal contamination, microbiological spoilage and biogenic amine content in sushi available on the Polish market.

BACKGROUND: The present study determined the heavy metal contamination (mercury, cadmium, lead, arsenic and nickel) of nori, restaurant-served sushi and ready-to-eat sushi meals available via retail chains. Moreover, both microbiological load and biogenic amine content in ready-to-eat sushi meals were analysed. RESULTS: All of the nori samples contained high levels of Cd (2.122 mg kg-1 ), Ni (0.715 mg kg-1 ), As (34.56 mg kg-1 ) and Pb (0.659 mg kg-1 ). The studied sushi samples contained high levels of Ni and Pb, reaching 0.194 and 0.142 mg kg-1 wet weight, respectively, being potentially hazardous to women during pregnancy and lactation and small children. None of the studied samples contained high levels of Hg. Overall, 37% of ready-to-eat sushi meals exceeded a microbiological load of 106 cfu g-1 . However, biogenic amine content in all of the samples was low, with a highest histamine content of 2.05 mg kg-1 . CONCLUSION: Sushi is not the source of high levels of biogenic amines even with high microbiological loads. Nevertheless, the high microbiological loads at the end of the shelf-life indicate that some processors might have problems with the distribution chain or implement a poor hygienic regime. Moreover as a result of possible risk associated with heavy metal contamination, the present study highlights the need to establish new regulations regarding the contamination of nori and sushi. © 2017 Society of Chemical Industry.

Increasing meat product functionality by the addition of milled flaxseed Linum usitatissimum.

BACKGROUND: Functional meat products are still rare on the market because it is difficult to incorporate new ingredients and obtain both a healthy and acceptable product. Flaxseed is known for its beneficial properties and, in the present study, it was used as an ingredient in the production of homogenised and liver sausages (0%, 5% and 10% flaxseed addition). RESULTS: Homogenised and liver sausages with the addition of 5% flaxseed were given the highest scores by the consumers, although the colour changed with the addition of flaxseed. The spreadability and hardness of the liver sausages increased with the addition of flaxseed, whereas the texture of homogenised sausages did not change. Addition of flaxseed improved the fatty acids profile from a health point of view for both products, as a result of increasing n-3 fatty acids and overall polyunsaturated fatty acids content. Values for thiobarbituric acid reactive substances were higher in products with flaxseed and were observed to increase during storage. CONCLUSION: The results of the present study indicate that it is possible to obtain products that are acceptable by consumers and, at the same time, are more healthy. A high level of α-linolenic acid in the sausages at a level of addition of 5% allows the product to be labelled with information regarding their high omega-3 fatty acid content. However, those products are more susceptible to oxidation. © 2016 Society of Chemical Industry.

The effect of hyaluronic acid addition on the properties of smoked homogenised sausages.

BACKGROUND: This research studied the possibility of using hyaluronic acid (HA) as a food additive for meat emulsions to create a novel functional food with improved rheological and water binding properties. Sausages with 200 and 500 g kg-1 water addition were supplemented with 0, 0.01, 0.05 and 0.1 g kg-1 of HA and stored for 14 days in vacuum. Rheology, texture, weight losses, proximate composition and microbiological analyses were performed together with the sensory evaluation of produced sausages. RESULTS: Surprisingly, the results show that the addition of 0.05 and 0.1 g kg-1 HA reduced yield and the stability of meat emulsion by causing water outflow from the product and decreased the sensory scores of the produced sausages. The sausage with 500 g kg-1 water and 0.01 g kg-1 HA addition was the only economically viable option for introducing the product on the market. CONCLUSION: HA has a potential of being a perfect functional food additive for meat industry, although further research regarding processing conditions should be performed. © 2016 Society of Chemical Industry.

Application of antimicrobial chitosan-Furcellaran-hydrolysate gelatin edible coatings enriched with bioactive peptides in shelf-life extension of pork loin stored at 4 and -20 °C.

In this study, the authors investigate the preservative capabilities of edible coatings comprising a blend of chitosan, furcellaran and gelatin hydrolysate enhanced with the bioactive peptides RW4 and LL37. The preservative effects on pork samples stored for 21 days at 4 °C and 6 months at -20 °C were studied, while examining changes in microbiological contamination, pH levels, water activity and sensory attributes. Microbiological analyses reveal the coatings' antimicrobial efficacy against aerobic bacteria, microscopic fungi and yeasts, particularly during the initial storage period, when coated samples exhibit microbial reductions of 0.5-2 log CFU/g compared to the controls. The coatings have no discernible impact on water activity during storage in refrigerated or freezer conditions. Notably, differences in pH development can be observed between the coated and control samples, potentially attributable to the antimicrobial action of the coatings. Sensory analysis allows to highlight the inhibition of deterioration related to sensory attributes through the use of edible coatings. In conclusion, employing bioactive peptide-enriched edible coatings holds promise for extending the shelf-life of perishable foods.

Comparative studies of structural, thermal, optical, and electrochemical properties of azines with different end groups with their azomethine analogues toward application in (opto)electronics.

Two series of azines and their azomethine analogues were prepared via condensation reaction of benzaldehyde, 2-hydroxybenzaldehyde, 4-pyridinecarboxaldehyde, 2-thiophenecarboxaldehyde, and 4-(diphenylamino)benzaldehyde with hydrazine monohydrate and 1,4-phenylenediamine, respectively. The structures of given compounds were characterized by FTIR, (1)H NMR, and (13)C NMR spectroscopy as well as elemental analysis. Optical, electrochemical, and thermal properties of all compounds were investigated by means of differential scanning calorimetry (DSC), UV-vis spectroscopy, stationary and time-resolved photoluminescence spectroscopy, and cycling voltammetry (CV). Additionally, the electronic properties, that is, orbital energies and resulting energy gap were calculated theoretically by density functional theory (DFT). Influence of chemical structure of the compounds on their properties was analyzed.

Antioxidant edible double-layered film based on waste from soybean production as a vegan active packaging for perishable food products.

Edible vegan films were obtained on the basis of furcellaran and protein hydrolysates from soybean bran. The aim of the study was to investigate the possibility of using innovative single- and double-layer films with antioxidant properties as packaging materials for vegetarian products. A further objective of the study was to evaluate the degree of biodegradation and potential toxicity with regard to the developed films. The tofu was analysed for changes in physicochemical parameters (weight loss, dry weight texture and colour), microbiological quality (total microbial count, yeast and moulds, psychotropic bacteria), and lipid oxidation (peroxidase and acid values, TBARS, fatty acid profile). It was found that films undergo almost complete biodegradation within 10 days and do not demonstrate any toxicity for cress seeds during their growth. Films are not effective in inhibiting the growth of microorganisms in tofu samples. Furthermore, they are not efficient in inhibiting the oxidation of tofu lipids. Compared to the control, the tofu samples covered with the innovative biopolymer films showed significantly lower moisture content and higher weight loss as well as hardness during the whole storage period.

Effects of Concentration and Type of Lipids on the Droplet Size, Encapsulation, Colour and Viscosity in the Oil-in-Water Emulsions Stabilised by Rapeseed Protein.

The objective of this study was to extract the rapeseed protein from by-products and further examine the effect of lab-made rapeseed protein on the droplet size, microstructure, colour, encapsulation and apparent viscosity of emulsions. Rapeseed protein-stabilised emulsions with an increasing gradient of milk fat or rapeseed oil (10, 20, 30, 40 and 50%, v/v) were fabricated using a high shear rate homogenisation. All emulsions showed 100% oil encapsulation for 30 days of storage, irrespective of lipid type and the concentration used. Rapeseed oil emulsions were stable against coalescence, whereas the milk fat emulsion showed a partial micro-coalescence. The apparent viscosity of emulsions raised with increased lipid concentrations. Each of the emulsions showed a shear thinning behaviour, a typical behaviour of non-Newtonian fluids. The average droplet size was raised in milk fat and rapeseed oil emulsions when the concentration of lipids increased. A simple approach to manufacturing stable emulsions offers a feasible hint to convert protein-rich by-products into a valuable carrier of saturated or unsaturated lipids for the design of foods with a targeted lipid profile.

Replacement of milk fat by rapeseed oil stabilised emulsion in commercial yogurt.

The incorporation of lipid droplets and further characterization of matrices within dairy products may be possible using such adjacent particles as protein complexes/lipids. Among the range of varied emulsions and their functionalities, great attention has recently focused on the fabrication of high internal phase types. Feasibly, stable alternatives structured with health-beneficial lipids like those derived from plants could replace saturated fatty acids. As a fat replacement strategy, the fate of incorporated HIPE would require some adjustments either with storage stability and/or structural feat for the food matrix. Therefore, the replacement of milk fat by rapeseed oil stabilised emulsion in commercial yogurt was investigated. This involved 25%, 50% and 75% rapeseed oil respectively assigned as low (LIPE), medium (MIPE), and high internal phase emulsion (HIPE). Specifically, emulsions were examined by droplet size, encapsulation, pH, zeta potential, phase separation, and rheology. The fat free yogurt supplemented by HIPE were examined by droplet size, zeta potential, pH, color, sensory, texture and microbiological aspects against positive (regular milk fat) and negative (fat free) yogurt controls. Results showed increasing rapeseed oil contents would form smaller droplet-like emulsions. Within the yogurt matrix however, incorporating HIPE would seemingly reduce oil droplet size without much compromise to bacterial viability, sensory, or texture. Overall, this simple method of lipid alternation shows promise in dairy products.

Consumer Attitudes towards Food Preservation Methods.

The development and scope of using various food preservation methods depends on the level of consumers' acceptance. Despite their advantages, in the case of negative attitudes, producers may limit their use if it determines the level of sales. The aim of this study was to evaluate the perception of seven different food processing methods and to identify influencing factors, such as education as well as living area and, at the same time, to consider whether consumers verify this type of information on the labels. Additionally, the study included the possibility of influencing consumer attitudes by using alternative names for preservation methods, on the example of microwave treatment. The results showed that conventional heat treatments were the most preferred preservation methods, whereas preservatives, irradiation, radio waves and microwaves were the least favored, suggesting that consumers dislike methods connected with "waves" to a similar extent as their dislike for preservatives. The control factors proved to significantly modify the evaluation of the methods. The analysis of alternative names for microwave treatment showed that "dielectric heating" was significantly better perceived. These research findings are important as the basis for understanding consumer attitudes. Implications for business and directions of future research are also indicated.

The effect of nitric oxide synthase and arginine on the color of cooked meat.

In previous studies, it has been suggested that the NO-synthase enzyme may be responsible for color formation in fermented sausages. Thus, this is the first study in which the aim was to analyze the effects of direct NO-synthase and arginine application to meat on its color after heating. Myoglobin forms as well as the presence of NO-myoglobin were investigated. The color of the meat and myoglobin forms present in the samples were mainly affected by pH differences, caused by a HEPES buffer or arginine. None of the variants demonstrated a bright pink color as in the case of the heated nitrite-cured sample. Based on analysis of the absorption spectra, it can be concluded that there is some evidence of nitroso-complex formation. Therefore, it is probable that optimizing the pH/time/temperature conditions for NO-synthase activity would allow to obtain a desirable color effect. NO-synthase could be used as an alternative curing ingredient.

Utilisation of soybean post-production waste in single- and double-layered films based on furcellaran to obtain packaging materials for food products prone to oxidation.

Single-layered films, based on furcellaran and protein hydrolysates from soybean bran (1st layer), were obtained. Moreover, a procedure for the preparation of double-layered films was developed, in which an ethanol extract from soybean bran was deposited onto the 1st layer. It was checked how the addition of the 2nd layer affects the functional properties of the film. The addition of the 2nd layer increased the thermal properties, modulus of elasticity and antioxidant activity, while decreases were noted for tensile strength and elongation at break parameters. The films were used as packaging materials for storing butter and the active films did not extend the quality of butter during storage, however, they behaved in the same way as synthetic films. Therefore they have the potential to be used as packaging material instead of a synthetic film.

Developing Technology for the Production of Innovative Coatings with Antioxidant Properties for Packaging Fish Products.

In this study, we investigated the effects of furcellaran−gelatine (FUR/GEL) coatings incorporated with herb extracts on the quality retention of carp fish during refrigeration. Nutmeg, rosemary, thyme, milfoil, marjoram, parsley, turmeric, basil and ginger were subjected to water and ethanol extraction methods (10% concentration of herbs). The water extractions of the rosemary and thyme (5%) were used for the further development of coatings due to their high 2,2-Diphenyl-1-picrylhydrazyl (DPPH: 85.49 and 83.28%) and Ferric Reducing Antioxidant Power Assay values (FRAP: 0.46 and 0.56 mM/L) (p < 0.05), respectively. A new, ready-to-cook product with the coatings (carp fillets) was evaluated regarding quality in terms of colour parameters, texture profile, water activity, Thiobarbituric Acid Reactive Substances (TBARSs) and sensory analyses during 12 days of storage at 4 °C. The results show that the colour of the carp fillets treated with the rosemary and thyme extracts became slightly darker and had a propensity towards redness and yellowness. In contrast to the control group, the carp fillets stored in the coatings with the rosemary extract effectively slowed the lipid oxidation processes. Therefore, the innovative coatings produced from carp processing waste may have high potential as components in convenience food products and could extend the shelf-life of carp fillets during refrigerated storage. However, further research is needed to assess the microbiological stability of the obtained food products.

One- and double-layered furcellaran/carp skin gelatin hydrolysate film system with antioxidant peptide as an innovative packaging for perishable foods products.

In this study, two active packaging types were produced: single-layer biopolymer films with a polysaccharide - furcellaran and carp skin gelatin hydrolysate; two-layer films with identical composition, but synthetic peptide Alanina-Tyrosine addition. The procedure objective was multiplying antioxidant effects of the hydrolysate complexed with furcellaran. Films were used on Atlantic mackerel (storage 4 °C, 15 days); samples were analysed for changes in microbiological quality, TVB-N, biogenic amine content, fatty acid composition, TBARS. Consumer analysis was performed characterising mackerel carcass perception depending on implemented active coatings. The developed innovative single- and double-layer coatings effectively slow down lipid oxidation processes, especially at the initial period of Atlantic mackerel storage in refrigerated conditions. The coatings effectively inhibited microorganism growth, extending shelf-life by 2 days, single-layer coatings showing greater efficiency. According to consumers, coating application did not adversely affect product attractiveness parameters. The developed innovative coatings show great applicative potential as a new active packaging for perishable foods.

Protocol for Designing New Functional Food with the Addition of Food Industry By-Products, Using Design Thinking Techniques-A Case Study of a Snack with Antioxidant Properties for Physically Active People.

The aim of the work was to develop an easy-to-follow protocol for designing novel functional products with the addition of food industry by-products using design thinking techniques. As a result, a 12-step protocol has been designed and presented. The protocol consists of steps from the initial formation of the design team, through all the stages of the production and prototyping, until establishing the final storage conditions and creating final documentation. The protocol has been validated and explained using a case study in which a fish industry by-product hydrolysate with bioactive properties was used to develop a novel functional food product for physically active people: a date bar with carp meat and carp skin gelatin hydrolysate. Following the 12 steps presented in the protocol resulted in developing a food product with high nutritional value and antioxidant power which remains stable during storage at reduced temperatures. Moreover, the product is characterized by good sensory qualities and can be easily implemented into full-scale production. The newly designed protocol is an easy-to-follow method that could be used in almost any kind of food industry sector to sucesfully develop user-focused functional food products with by-product addition.

The effects of active double-layered furcellaran/gelatin hydrolysate film system with Ala-Tyr peptide on fresh Atlantic mackerel stored at -18 °C.

This is the first time that active double-layered furcellaran/gelatin hydrolysate films containing Ala-Tyr peptide were developed and characterised for their properties. Afterwards, films were used on Atlantic mackerel stored at -18 °C for 4 months and samples were analysed for changes in their microbiological quality, TVB-N, biogenic amine content, fatty acid composition and TBARS. Active films had higher TS (13.4 MPa) and lower WS (62.8%). The films showed no DPPH radical scavenging properties but high FRAP (6.6 mMol Trolox/mg). No significant effects on the oxidation of fish samples were observed with TBARS increasing from 12.04 to 22.50 mg/kg. Freezing successfully inhibited the growth of microorganisms and no differences in microbiological growth or biogenic amine formation were observed. However, the application of films inhibited the formation of TVB-N. Antimicrobiological properties of the film should be further investigated during storage of perishable food products at temperatures above 0 °C.

The properties of poultry batters depending on the amount of water and Plantago ovata husk.

BACKGROUND: Plantago ovata is a medicinal plant, rich in fibre. Its seed-husk (psyllium) is used to control constipation, obesity, diabetes and cholesterol levels etc. In the presented study, it was incorporated into poultry meat formulations and the quality parameters of the cooked samples were tested. METHODS: Ground thigh meat from chicken was mixed with water and powdered Plantago ovata husk. The amount of water and husk ranged between 0-40% and 0-3%, respectively. The proximate composition of raw batters and cooked samples was tested. Production yields were calculated after cooking the samples in a water bath. Water activity, texture and colour parameters were analysed in the cooked samples. RESULTS: Fat content was lower in the samples with higher water addition. Water activity was lower in the samples with psyllium, but increased in the case of the highest water addition. Production yields were the highest while hardness was the lowest in the sample with both 3% of Plantago ovata husk and 40% of water. Lightness decreased when psyllium was added while redness decreased with both psyllium and water addition. CONCLUSIONS: The formulation with 40% of water and 3% of psyllium was chosen as the best, due to high production yields. Further tests should be conducted to test microbiological stability, shelf-life and consumer acceptance of products manufactured according to the abovementioned parameters.