Ag/ZnO microcavities with high sensitivity and self-cleaning properties for fast repetitive SERS detection.

A SERS substrate with high sensitivity and reusability was proposed. The chip consists of multiple ZnO microcavities loaded with silver particles. Based on structural characteristics, this coupling between cavity modes and localized surface plasmon modes can highly localize the electric field, where experimental results revealed a detection limit of 10-11 M for R6G. In addition, during carrier control in semiconductors with localized electromagnetic fields, our substrate also exhibits high self-cleaning efficiency and in situ detection stability. Even in a dry environment, it exhibits excellent light-mediated cleaning ability across multiple reuse test cycles. The convenient, rinse-free substrate, with its cost-effective and sustainable features, shows great promise for the study on detection and degradation of active materials.

Highly sensitive and selective fluorescent "turn-on" sensor for Ag+ detection using MAPbBr3@PCN-221(Fe): An efficient Ag+-bridged energy transfer from perovskite to MOF.

Metal ion-induced water pollution is attracting increasing public attention. Perovskite quantum dots and metal-organic frameworks (MOFs), owing to their outstanding properties, hold promise as ideal probes for detecting metal ions. In this study, a composite material, MAPbBr3@PCN-221(Fe), was prepared by encapsulating MAPbBr3 quantum dots with PCN-221(Fe), demonstrating high chemical stability and good reusability. The composite material shows a sensitive fluorescence turn-on signal in the presence of silver ions. The fluorescence intensity of the composite material exhibits a linear relationship with the concentration of Ag+ in the solution, with a low detection limit of 8.68 µM. Moreover, the fluorescence signal exhibits a strong selectivity for Ag+, enabling the detection of Ag+ concentration. This fluorescence turn-on signal originates from the Ag+-bridged energy transfer from the conductive band of MAPbBr3 to the excited state of the MOF, which is directly proportional to the concentration of silver ions. Simultaneously, this finding may open up a new possibility in artificial controlled energy transfer from perovskite to MOF for future development.

Construction of Ag-modified ZnO/g-C3N4 heterostructure for enhanced photocatalysis performance.

ZnO/g-C3N4 heterojunction modified with Ag nanoparticles (ZnO/CN/Ag) was synthesized by depositing ZnO nanorods/Ag nanoparticles onto g-C3N4 nanosheets. Under xenon lamp irradiation, 99% of Rhodamine B (RhB) was degraded by ZnO/CN/Ag-5% composite within 30 min, which was much higher than the degradation efficiency of ZnO and ZnO/CN. The synergistic effect of g-C3N4 and ZnO, along with the localized surface plasmon resonance effect of Ag NPs, contributes to the improvement of photocatalytic performance. Ag nanoparticle provides another charge transfer path from g-C3N4 to ZnO, which speeds up the separation of electron-hole pairs. Meanwhile, the catalyst had good stability and recyclability. Finite-difference time-domain method and the density functional theory were used to obtain the charge transfer process. The photodegradation process has been studied in depth.

Amine-Linked Flavonoids as Agents Against Cutaneous Leishmaniasis.

We have designed, synthesized, and characterized a library of 38 novel flavonoid compounds linked with amines. Some of these amine-linked flavonoids have potent in vitro activity against parasites that cause cutaneous leishmaniasis, a tropical disease endemic in 80 countries worldwide. The most promising candidate, FM09h, was highly active with IC50 of 0.3 µM against L. amazonensis, L. tropica and L. braziliensis amastigotes. It was metabolically stable (39% and 66% of FM09h remaining after 30-minute incubation with human and rat liver microsomes respectively). In L. amazonensis LV78 cutaneous leishmaniasis mouse model, intralesional injection of FM09h (10 mg/kg, once every 4 days for 8 times) demonstrated promising effect in reducing the footpad lesion thickness by 72%, displaying an efficacy comparable to SSG (63%).

Amino-Functionalized Interfacial Layer Enables an Ultra-Uniform Amorphous Solid Electrolyte Interphase for High-Performance Aqueous Zinc-Based Batteries.

Aqueous rechargeable zinc-based batteries (ZBBs) are emerging as desirable energy storage systems because of their high capacity, low cost, and inherent safety. However, the further application of ZBBs still faces many challenges, such as the issues of uncontrolled dendrite growth and severe parasitic reactions occurring at the Zn anode. Herein, an amino-grafted bacterial cellulose (NBC) film is prepared as artificial solid electrolyte interphase (SEI) for the Zn metal anodes, which can significantly reduce zinc nucleation overpotential and lead to the dendrite-free deposition of Zn metal along the (002) crystal plane more easily without any external stimulus. More importantly, the chelation between the modified amino groups and zinc ions can promote the formation of an ultra-even amorphous SEI upon cycling, reducing the activity of hydrate ions, and inhibiting the water-induced side reactions. As a result, the Zn||Zn symmetric cell with NBC film exhibits lower overpotential and higher cyclic stability. When coupled with the V2 O5 cathode, the practical pouch cell achieves superior electrochemical performance over 1000 cycles.

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane.

The use of poly(1,3-dioxolane) (PDOL) electrolyte for lithium batteries has gained attention due to its high ionic conductivity, low cost, and potential for large-scale applications. However, its compatibility with Li metal needs improvement to build a stable solid electrolyte interface (SEI) toward metallic Li anode for practical lithium batteries. To address this concern, this study utilized a simple InCl3 -driven strategy for polymerizing DOL and building a stable LiF/LiCl/LiIn hybrid SEI, confirmed through X-ray photoelectron spectroscopy (XPS) and cryogenic-transmission electron microscopy (Cryo-TEM). Furthermore, density functional theory (DFT) calculations and finite element simulation (FES) verify that the hybrid SEI exhibits not only excellent electron insulating properties but also fast transport properties of Li+ . Moreover, the interfacial electric field shows an even potential distribution and larger Li+ flux, resulting in uniform dendrite-free Li deposition. The use of the LiF/LiCl/LiIn hybrid SEI in Li/Li symmetric batteries shows steady cycling for 2000 h, without experiencing a short circuit. The hybrid SEI also provided excellent rate performance and outstanding cycling stability in LiFePO4 /Li batteries, with a high specific capacity of 123.5 mAh g-1 at 10 C rate. This study contributes to the design of high-performance solid lithium metal batteries utilizing PDOL electrolytes.

Highly Thermostable Interphase Enables Boosting High-Temperature Lifespan for Metallic Lithium Batteries.

In consideration of high specific capacity and low redox potential, lithium metal anodes have attracted extensive attention. However, the cycling performance of lithium metal batteries generally deteriorates significantly under the stringent conditions of high temperature due to inferior heat tolerance of the solid electrolyte interphase (SEI). Herein, controllable SEI nanostructures with excellent thermal stability are established by the (trifluoromethyl)trimethylsilane (TMSCF3 )-induced interface engineering. First, the TMSCF3 regulates the electrolyte decomposition, thus generating an SEI with a large amount of LiF, Li3 N, and Li2 S nanocrystals incorporated. More importantly, the uniform distributed nanocrystals have endowed the SEI with enhanced thermostability according to the density functional theory simulations. Particularly, the sub-angstrom visualization on SEI through a conventional transmission electron microscope (TEM) is realized for the first time and the enhanced tolerance to the heat damage originating from TEM imaging demonstrates the ultrahigh thermostability of SEI. As a result, the highly thermostable interphase facilitates a substantially prolonged lifespan of full cells at a high temperature of 70 °C. As such, this work might inspire the universal interphase design for high-energy alkali-metal-based batteries applicated in a high-temperature environment.

Rapidly Constructing Sodium Fluoride-Rich Interface by Pressure and Diglyme-Induced Defluorination Reaction for Stable Sodium Metal Anode.

Sodium (Na) metal is able to directly use as a battery anode but have a highly reductive ability of unavoidably occurring side reactions with organic electrolytes, resulting in interfacial instability as a primary factor in performance decay. Therefore, building stable Na metal anode is of utmost significance for both identifying the electrochemical performance of laboratory half-cells employed for quantifying samples and securing the success of room-temperature Na metal batteries. In this work, we propose an NaF-rich interface rapidly prepared by pressure and diglyme-induced defluorination reaction for stable Na metal anode. Once the electrolyte is dropped into the coin-type cells followed by a slight squeeze, the Na metal surface immediately forms a protective layer consisting of amorphous carbon and NaF, effectively inhibiting the dendrite growth and dead Na. The resultant Na metal anode exhibits a long-term cycling lifespan over 1800 h even under the area capacity of 3.0 mAh cm-2 . Furthermore, such a universal and facile method is readily applied in daily battery assembly regarding Na metal anode.

Asymmetric Inverse-Electron-Demand Oxa-Diels-Alder Reaction with Morita-Baylis-Hillman Carbonates of 2-Cyclopentenone via a Palladium-Catalyzed Umpolung Strategy.

Here we uncovered that the dienones generated from the Morita-Baylis-Hillman carbonates of 2-cyclopentenone under Pd(0) catalysis could be umpolunged by regioselectively forming η2-Pd(0) complexes via π-Lewis base activation, and underwent asymmetric inverse-electron-demand oxa-Diels-Alder reaction with α-cyano chalcones. An array of fused pyran frameworks with dense substitutions was constructed with excellent stereoselectivity (up to 99% ee, >19:1 dr), which could be elaborated to access enantioenriched architectures with higher molecular complexity.

Prognostic factors and outcomes of surgical intervention for patients with spinal metastases secondary to lung cancer: an update systematic review and meta analysis.

PURPOSE: Lung cancer is one of the most common malignant tumors. Most patients develop spinal metastases during the course of cancer and suffer skeletal-related events. Currently, no consensus has been reached on the prognostic factors in patients undergoing surgeries. This study aimed to answer two questions: (1) what are the effects of surgical intervention, and (2) what are the factors associated with postoperative survival. METHODS: Searches were performed on electronic databases including PubMed, Ovid/MEDLINE, Cochrane, and Scopus for articles published before February of 2022, involving the survival factors of patients with spinal metastasis. Multiple data items were considered, such as baseline demographics, surgical details, clinical outcome, and prognostic factors. The analysis was performed in Review Manager (RevMan) 5.5. The prognostic factors of survival were analyzed with univariate and multivariate cox regression analysis. RESULTS: Finally, 14 studies with 813 patients were identified. Their 6, 12, and 24 months survival rates ranged from 18 to 58%, 18 to 22.4%, and 0 to 58.5%, respectively. The pooled hazard ratio of preoperative ambulatory status and the number of involved vertebrae demonstrated statistical significance, while no significant prognostic effect on the overall survival was found for targeted therapy, visceral metastases, chemotherapy, radiotherapy, or postoperative ambulatory status. CONCLUSION: Overall, surgical intervention could achieve significant pain relief and neurological function improvements. For patients receiving surgery for spinal metastasis from lung cancer, preoperative ambulatory status and the number of involved vertebrae were significant prognostic factors associated with their survival.

Neohesperidin prevents colorectal tumorigenesis by altering the gut microbiota.

Neohesperidin (NHP), derived from citrus fruits, has attracted considerable interest due to its preventative and therapeutic effects on numerous diseases. However, little progress has been made in determining the exact function of NHP on tumorigenesis. In the current study, we found that NHP inhibited colorectal tumorigenesis in the APC min/+ transgenic mouse model, as well as induced apoptosis and blocked angiogenesis in vivo. Our in-cell study suggested that this tumorigenic preventative effect of NHP is not due to the direct impact on tumor cells. Intriguingly, by utilizing 16 s rRNA gene-based microbiota sequencing, the relative abundance of Bacteroidetes was decreased, while Firmicutes and Proteobacteria were increased in the presence of NHP. Additionally, the fecal microbiota transplantation experiment further revealed that feeding with fecal of NHP-treated mice induced considerable inhibition of tumorigenesis, which indicates that the alteration of gut microbiota is responsible for NHP-mediated prevention of colorectal tumorigenesis. Thus, our study not only suggests the efficacy of NHP as a potent natural product for preventing colorectal cancer but also proposes a compelling model to connect the gut microbiota to the preventative effect of NHP on tumorigenesis.

Water-stable perovskite CsPb2Br5/CdSe quantum dot-based photoelectrochemical sensors for the sensitive determination of dopamine.

A heterojunction of CdSe quantum dots in situ grown on the perovskite CsPb2Br5 (CsPb2Br5/CdSe) for water-stable photoelectrochemical (PEC) sensing was simply synthesized using the hot-injection method. Due to the inherent built-in electric field and the matching band structure between CsPb2Br5 and CdSe, the CsPb2Br5/CdSe p-n heterojunction demonstrates enhanced photoelectrochemical properties. Accelerated interfacial charge transfer and increased electron-hole pair separation enable hydrolysis-resistant CsPb2Br5/CdSe sensors to exhibit heightened sensitivity with an ultra-low detection limit (0.0124 µM) and a wide linear range (0.4-303.9 µM) in subsequent dopamine detection. Moreover, the CsPb2Br5/CdSe sensors show excellent anti-interference ability, as well as remarkable stability and reproducibility in water solvent. It is noteworthy that this work is conducted in an aqueous environment, which provides an inspiring and convenient way for photoelectric and photoelectrocatalysis applications based on water-resistant perovskites.

Anode-Free Sodium Metal Pouch Cell Using Cu3P Nanowires In Situ Grown on Current Collector.

Anode-free sodium metal battery (AFSMB) promises high energy density but suffers from the difficulty of maintaining high cycling stability. Nonuniform sodium (Na) deposition on the current collector is largely responsible for capacity decay in the cycling process of AFSMB. Here, a unique copper phosphide (Cu3P) nanowire is constructed on copper (Cu3P@Cu) as a sodium deposition substrate by an in situ growth method. Superior electrochemical performance of Cu3P@Cu anode is delivered in asymmetric cells with an average Coulombic efficiency of 99.8% for over 800 cycles at 1 mA cm-2 with 1 mA h cm-2. The symmetric cell of Cu3P@Cu displayed a cycling lifespan of over 2000 h at 2 mA cm-2 with 1 mA h cm-2. Cryo-transmission electron microscope characterization and first principles calculation revealed that the low Na+ absorption energy and low Na+ diffusion energy barrier on Na3P promoted uniform Na nucleation and deposition, thus enhancing the Na surface stability. Moreover, anode-free Na3V2(PO4)3//Cu3P@Cu full pouch cell delivered a considerable cycling capacity of ≈15 mA h in 170 cycles, demonstrating its practical feasibility.

CDR1, a DUF946 domain containing protein, positively regulates cadmium tolerance in Arabidopsis thaliana by maintaining the stability of OPT3 protein.

Industrial and agricultural production processes lead to the accumulation of cadmium (Cd) in soil, resulting in crops absorb Cd from contaminated soil and then transfer it to human body through the food chain, posing a serious threat to human health. Thus, it is necessary to explore novel genes and mechanisms involved in regulating Cd tolerance and detoxification in plants. Here, we found that CDR1, a DUF946 domain containing protein, localizes to the plasma membrane and positively regulates Cd stress tolerance. The cdr1 mutants exhibited Cd sensitivity, accumulated excessive Cd in the seeds and roots, but decreased in leaves. However, CDR1-OE transgenic plants not only showed Cd tolerance but also significantly reduced Cd in seeds and roots. Additionally, both in vitro and in vivo assays demonstrated an interaction between CDR1 and OPT3. Cell free protein degradation and OPT3 protein level determination assays indicated that CDR1 could maintain the stability of OPT3 protein. Moreover, genetic phenotype analysis and Cd content determination showed that CDR1 regulates Cd stress tolerance and affect the distribution of Cd in plants by maintaining the stability of OPT3 protein. Our discoveries provide a key candidate gene for directional breeding to reduce Cd accumulation in edible seeds of crops.

The MYC2 and MYB43 transcription factors cooperate to repress HMA2 and HMA4 expression, altering cadmium tolerance in Arabidopsis thaliana.

Cadmium (Cd) represents a hazardous heavy metal, prevalent in agricultural soil due to industrial and agricultural expansion. Its propensity for being absorbed by edible plants, even at minimal concentrations, and subsequently transferred along the food chain poses significant risks to human health. Accordingly, it is imperative to investigate novel genes and mechanisms that govern Cd tolerance and detoxification in plants. Here, we discovered that the transcription factor MYC2 directly binds to the promoters of HMA2 and HMA4 to repress their expression, thereby altering the distribution of Cd in plant tissues and negatively regulating Cd stress tolerance. Additionally, molecular, biochemical, and genetic analyses revealed that MYC2 interacts and cooperates with MYB43 to negatively regulate the expression of HMA2 and HMA4 and Cd stress tolerance. Notably, under Cd stress conditions, MYC2 undergoes degradation, thereby alleviating its inhibitory effect on HMA2 and HMA4 expression and plant tolerance to Cd stress. Thus, our study highlights the dynamic regulatory role of MYC2, in concert with MYB43, in regulating the expression of HMA2 and HMA4 under both normal and Cd stress conditions. These findings present MYC2 as a promising target for directed breeding efforts aimed at mitigating Cd accumulation in edible plant roots.

A Targeted and Protease-Activated Genetically Encoded Melittin-Containing Particle for the Treatment of Cutaneous and Visceral Leishmaniasis.

Intracellular infections are difficult to treat, as pathogens can take advantage of intracellular hiding, evade the immune system, and persist and multiply in host cells. One such intracellular parasite, Leishmania, is the causative agent of leishmaniasis, a neglected tropical disease (NTD), which disproportionately affects the world's most economically disadvantaged. Existing treatments have relied mostly on chemotherapeutic compounds that are becoming increasingly ineffective due to drug resistance, while the development of new therapeutics has been challenging due to the variety of clinical manifestations caused by different Leishmania species. The antimicrobial peptide melittin has been shown to be effective in vitro against a broad spectrum of Leishmania, including species that cause the most common form, cutaneous leishmaniasis, and the most deadly, visceral leishmaniasis. However, melittin's high hemolytic and cytotoxic activity toward host cells has limited its potential for clinical translation. Herein, we report a design strategy for producing a melittin-containing antileishmanial agent that not only enhances melittin's leishmanicidal potency but also abrogates its hemolytic and cytotoxic activity. This therapeutic construct can be directly produced in bacteria, significantly reducing its production cost critical for a NTD therapeutic. The designed melittin-containing fusion crystal incorporates a bioresponsive cathepsin linker that enables it to specifically release melittin in the phagolysosome of infected macrophages. Significantly, this targeted approach has been demonstrated to be efficacious in treating macrophages infected with L. amazonensis and L. donovani in cell-based models and in the corresponding cutaneous and visceral mouse models.

DECODE: Contamination-Free Digital CRISPR Platform for Point-of-Care Detection of Viral DNA/RNA.

Rapid and precise nucleic acid testing at the point-of-care (POC) is essential for effective screening and management of infectious diseases. Current polymerase-based molecular diagnostics often suffer from potential cross-contamination issues, particularly in POC settings. Here, we introduce DECODE, a contamination-free nucleic acid detection platform integrating digital microfluidics (DMF) for nucleic acid extraction and a digital CRISPR amplification-free assay for pathogen detection. The digital CRISPR assay demonstrates sensitivity, detecting target DNA and RNA in the reaction mixture at concentrations of 10 and 5 copies/µL, respectively. Leveraging DMF-extracted samples enhances the performance of the digital CRISPR amplification-free assay. DECODE offers a sample-to-result workflow of 75 min using compact devices. Validation studies using clinical samples confirm DECODE's robust performance, achieving 100% sensitivity and specificity in detecting HPV18 from cervical epithelial cells and influenza A from nasal swabs. DECODE represents a versatile, contamination-free detection platform poised to enhance integrated public health surveillance efforts.

Synergic treatment of domestic wastewater and food waste in an anaerobic membrane bioreactor demo plant: Process performance, energy consumption, and greenhouse gas emissions.

Ambient operation and large-scale demonstration have limited the implementation and evaluation of anaerobic membrane bioreactors (AnMBRs) for low-strength wastewater treatment. Here, we studied these issues at an AnMBR demo plant that treats domestic wastewater and food waste together at ambient temperatures (7-28 °C). At varied hydraulic retention times (HRTs, 8-42 h), the AnMBR achieved a COD removal efficiency and biogas production of 80.4% ± 3.9% and 66.5 ± 9.4 NL/m3-Influent, respectively. Moreover, a stable high membrane flux of 14.4 L/m2/h was reached. The electric energy consumption for the AnMBR operation was 0.269-0.433 kW·h/m3, and 49.4%-91.3% could be compensated by the electric energy produced from methane production. At an HRT of 10 h, the AnMBR system demonstrated an impressively low net electric energy consumption of merely 0.05 kW·h/m3, resulting in a net greenhouse gas emission of 0.015 CO2-eq/m3, cutting 85% compared to the conventional activated sludge process. Achievements in this study provide key parameters for the ambient operation of AnMBR and demonstrate that AnMBR is an energy-saving and low-carbon solution for low-strength wastewater treatment.

Unraveling the Nucleation and Growth Mechanism of Potassium Metal on 3D Skeletons for Dendrite-Free Potassium Metal Batteries.

Designing three-dimensional (3D) porous carbonaceous skeletons for K metal is one of the most promising strategies to inhibit dendrite growth and enhance the cycle life of potassium metal batteries. However, the nucleation and growth mechanism of K metal on 3D skeletons remains ambiguous, and the rational design of suitable K hosts still presents a significant challenge. In this study, the relationships between the binding energy of skeletons toward K and the nucleation and growth of K are systematically studied. It is found that a high binding energy can effectively decrease the nucleation barrier, reduce nucleation volume, and prevent dendrite growth, which is applied to guide the design of 3D current collectors. Density functional theory calculations show that P-doped carbon (P-carbon) exhibits the highest binding energy toward K compared to other elements (e.g., N, O). As a result, the K@P-PMCFs (P-binding porous multichannel carbon nanofibers) symmetric cell demonstrates an excellent cycle stability of 2100 h with an overpotential of 85 mV in carbonate electrolytes. Similarly, the perylene-3,4,9,10-tetracarboxylic dianhydride || K@P-PMCFs cell achieves ultralong cycle stability (85% capacity retention after 1000 cycles). This work provides a valuable reference for the rational design of 3D current collectors.

π-π Stacked Nigrosine@Carbon Nanotube Nanocomposite as an All-in-One Additive for High Energy Flexible Batteries.

The pursuit of high energy density in lithium batteries has driven the development of efficient electrodes with low levels of inactive components. Herein, a facile approach involving the use of π-π stacked nigrosine@carbon nanotube nanocomposites as an all-in-one additive for a LiFePO4 cathode has been developed. This design significantly reduces the proportion of inactive substances within the cathode, resulting in a battery that exhibits a high specific capacity of 143 mAh g-1 at a 1 C rate and shows commendable cyclic performance. Furthermore, the elimination of rigid current collectors endows the electrode with flexibility, offering avenues for future wearable energy storage devices.