Insights into Patient Experiences with Facilitated Subcutaneous Immunoglobulin Therapy in Primary Immune Deficiency: A Prospective Observational Cohort.

BACKGROUND: Immunoglobulin G replacement therapy (IgRT), intravenous (IV) and subcutaneous (SC) routes, is pivotal in treatment of primary immunodeficiencies (PID). In recent years, facilitated subcutaneous immunoglobulin (fSCIG), a combination of rHuPH20 and 10% IgG has emerged as a delivery method to combine advantages of both IV and SC. METHOD: In an observational prospective cohort, we investigated patient experience with fSCIG in PID patients from 5 PID centers for up to 12 months. We assessed the efficacy and safety of this treatment with patient/caregiver- and physician-reported indicators. Additionally, we analyzed patient treatment satisfaction (TSQM-9) and quality of life (QoL). RESULTS: We enrolled 29 patients (22 pediatric and 7 adults; 14 females and 15 males; (median: 15, min-max: 2-40.9 years) who initiated fSCIG as IgRT-naive (n = 1), switched from conventional rapid-push 10% SCIG (n = 6) or IVIG (n = 22). Among the participants, 19 (65%) exhibited antibody deficiencies, 8 (27%) combined immunodeficiencies, and 2 (7%) immune dysregulations. Remarkably, targeted trough immunoglobulin G levels were achieved under all previous IgRTs as well as fSCIG. No severe systemic adverse drug reactions were documented, despite prevalent local (%86.45) and mild systemic (%26.45) adverse reactions were noted with fSCIG. Due to mild systemic symptoms, 2 patients switched from fSCIG to 10% SCIG. The patient satisfaction survey revealed a notable increase at 2-4th (p = 0.102); 5-8th (p = 0.006) and 9-12th (p < 0.001) months compared to the baseline. No significant trends were observed in QoL surveys. CONCLUSION: fSCIG demonstrates admissable tolerability and efficacy in managing PIDs in addition to notable increase of patients' drug satisfaction with IgRT. The identified benefits support the continuation of this therapy despite the local reactions.

Assessment of autoantibodies associated with intravenous immunoglobulin replacement therapy in children with primary immunodeficiency.

While it is known that immunoglobulin replacement therapy (IgRT) used in the treatment of primary immunodeficiency disorders (PIDs) can lead to the passive transfer of autoantibodies, there is no data indicating that these antibodies can cause clinical symptoms in patients. This study aimed to investigate the presence of autoantibodies and their clinical correlation in patients diagnosed with PIDs receiving IgRT. Paediatric patients who were diagnosed with PIDs, and administered IgRT at our immunology clinic between 1 January 2012 and 31 December 2021, were included in the study. The medical records of these patients were retrospectively analysed, and autoantibodies were screened. Autoantibody screening was conducted at least once in 48 cases. Among these cases, 29 cases (60.4%) demonstrated positivity for at least one of the autoantibodies screened in the study. Among these cases, 23 tested positive for anti-TPO, 9 for anti-TG and 2 for both anti-TPO and anti-TG. Only two of these patients were confirmed to have Hashimoto's thyroiditis. In 30 cases, autoantibodies related to Celiac disease (CD) were screened, with at least one being positive in five different cases; CD was not confirmed. The results of our study suggest that passive transfer of autoantibodies to patients with IgRT does not cause any significant clinical findings. In addition, in cases of PID, autoantibodies detected in the blood passed to patients with IgRT can lead to misdiagnosis. Screening for autoantibodies in patients with PID undergoing IgRT may not yield accurate results in terms of detecting autoimmune diseases.

Clinical physicists' perceptions of weekly chart checks and the potential role for automated image review assessed by structured interviews.

BACKGROUND: This study utilizes interviews of clinical medical physicists to investigate self-reported shortcomings of the current weekly chart check workflow and opportunities for improvement. METHODS: Nineteen medical physicists were recruited for a 30-minute semi-structured interview, with a particular focus placed on image review and the use of automated tools for image review in weekly checks. Survey-type questions were used to gather quantitative information about chart check practices and importance placed on reducing chart check workloads versus increasing chart check effectiveness. Open-ended questions were used to probe respondents about their current weekly chart check workflow, opinions of the value of weekly chart checks and perceived shortcomings, and barriers and facilitators to the implementation of automated chart check tools. Thematic analysis was used to develop common themes across the interviews. RESULTS: Physicists ranked highly the value of reducing the time spent on weekly chart checks (average 6.3 on a scale from 1 to 10), but placed more value on increasing the effectiveness of checks with an average of 9.2 on a 1-10 scale. Four major themes were identified: (1) weekly chart checks need to adapt to an electronic record-and-verify chart environment, (2) physicists could add value to patient care by analyzing images without duplicating the work done by physicians, (3) greater support for trending analysis is needed in weekly checks, and (4) automation has the potential to increase the value of physics checks. CONCLUSION: This study identified several key shortcomings of the current weekly chart check process from the perspective of the clinical medical physicist. Our results show strong support for automating components of the weekly check workflow in order to allow for more effective checks that emphasize follow-up, trending, failure modes and effects analysis, and allow time to be spent on other higher value tasks that improve patient safety.

Rectal deformation management with IGRT in prostate radiotherapy: Can it be managed with rigid alignment alone?

PURPOSE: It is challenging to achieve appropriate target coverage of the prostate with Image Guided Radiation Therapy (IGRT) while simultaneously constraining rectal doses within planned values when there is significant variability in rectal filling and shape. We investigated if rectum planning goals can be fulfilled using rigid CBCT-based on-board alignment to account for interfraction rectal deformations. METHODS: Delivered rectal doses corresponding to prostate alignment ("PR") and anterior rectum alignment ("AR") for 239 daily treatments from 13 patients are reported. Rectal doses were estimated by rigidly mapping the planned dose on the daily CT derived from the daily CBCT according to respective alignment shifts. Rectum V95% (rV95%) was used for analyses. RESULTS: Compared to "PR", "AR" alignment increased rV95% for an average of 34.4% across all patients. rV95% (cc) averaged over all fractions was significant from planning values for 10/13 patients for "PR" and for 9/13 for "AR". 3/13 patients had reproducible anatomy. Of patients with non-reproducible anatomy, three had dosimetrically more favorable, while seven had less favorable anatomies. Most shift differences (82.3%) between the "PR" and "AR" alignments larger than 2 mm resulted in rV95% changes larger than 2 cc. Most shift differences (82.2%) of 2 mm or less between the "PR" and "AR" alignments resulted in rV95% changes less than 2 cc. The average percentage of fractions among patients in which anterior or posterior shifts for "AR" and "PR" alignment was larger than the PTV margins was 9.1% (0.0%-37.5%) and 1.3% (0%-10%). CONCLUSION: Rectal deformation and subsequent inconsistent interfraction separation between prostate and rectal wall translate into anatomical changes that cannot always be mitigated with rigid alignment. If systematic differences exist due to a non-reproducible planning anatomy, attempts to restore the planned rectal doses through anterior rectum alignment produce rather small improvements and may result in unacceptable target underdosage.

ACSwinNet: A Deep Learning-Based Rigid Registration Method for Head-Neck CT-CBCT Images in Image-Guided Radiotherapy.

Accurate and precise rigid registration between head-neck computed tomography (CT) and cone-beam computed tomography (CBCT) images is crucial for correcting setup errors in image-guided radiotherapy (IGRT) for head and neck tumors. However, conventional registration methods that treat the head and neck as a single entity may not achieve the necessary accuracy for the head region, which is particularly sensitive to radiation in radiotherapy. We propose ACSwinNet, a deep learning-based method for head-neck CT-CBCT rigid registration, which aims to enhance the registration precision in the head region. Our approach integrates an anatomical constraint encoder with anatomical segmentations of tissues and organs to enhance the accuracy of rigid registration in the head region. We also employ a Swin Transformer-based network for registration in cases with large initial misalignment and a perceptual similarity metric network to address intensity discrepancies and artifacts between the CT and CBCT images. We validate the proposed method using a head-neck CT-CBCT dataset acquired from clinical patients. Compared with the conventional rigid method, our method exhibits lower target registration error (TRE) for landmarks in the head region (reduced from 2.14 ± 0.45 mm to 1.82 ± 0.39 mm), higher dice similarity coefficient (DSC) (increased from 0.743 ± 0.051 to 0.755 ± 0.053), and higher structural similarity index (increased from 0.854 ± 0.044 to 0.870 ± 0.043). Our proposed method effectively addresses the challenge of low registration accuracy in the head region, which has been a limitation of conventional methods. This demonstrates significant potential in improving the accuracy of IGRT for head and neck tumors.

Clinical experience in the use of 3D printing as a rapid replacement of traditional radiation therapy immobilization materials.

PURPOSE: Patient positioning and immobilization devices are commonly employed in radiation therapy. Unfortunately, cases can arise where the devices need to be reconstructed or improved. This work describes clinical processes to use a planning CT, to design and 3D print immobilization devices for reproducible patient positioning within a clinically feasible time frame when traditional methods can no longer be used or are insufficient. MATERIALS/METHODS: Three clinical cases required rapid 3D printing of an immobilization device mid-treatment due to the following: (1) a lost headrest cushion, (2) needed improvement in lumbar spine positioning, and (3) a partially deflated vacuum immobilization mattress. RESULTS: In the three cases, the 3D printed immobilization devices were clinically implemented successfully; two of the devices were fully designed and printed in 1 day. The 3D printed immobilization devices achieved a positioning accuracy sufficient to avoid the necessity to repeat the simulation and planning process. CONCLUSION: If traditional immobilization devices fail or are misplaced, it is feasible to have a 3D printed replacement within the time span of 1 day. The design and fabrication methods, as well as the experiences gained, are described in detail to assist clinicians to implement 3D printing for similar situations.

Application of repeat image analysis to radiation therapy imaging modalities as a quality improvement tool for image guided radiotherapy.

BACKGROUND: Repeat images contribute to excess patient dose and workflow inefficiencies and can be analyzed to identify potential areas for improvement within a program. Although routinely used in diagnostic imaging, repeat image analysis is not widely used in radiation therapy imaging, despite the role of imaging in the delivery of precise radiation treatments. PURPOSE: Repeat image analysis was performed for on-board cone beam CT imagers and CT simulators within a radiation therapy department. Both the rate of repeat images and the reasons for the repeat images were analyzed. METHODS: Data from nine conventional linear accelerators and three CT simulators were analyzed retrospectively over a 5-month period. Repeated images that were not part of the standard of care were considered repeat images. The repeat rate was expressed as the number of repeat scans as percentage of the total number of scans performed. The reasons for the repeats were collected and classified as either patient preparation, patient setup, patient motion, or machine error. These reasons were further classified into sub-categories. RESULTS: The overall repeat rate across the linear accelerators was 3.3%, with a maximum of 5% on any single machine. The repeat rate for the three CT simulators was 1.5%. The most common reasons for repeat images were patient preparation (incorrect bladder or rectal filling) and patient setup or positioning. Greater positioning challenges led to higher repeat rates on units that treat a large number of breast patients, palliative patients, or pediatric patients. CONCLUSIONS: Repeat image analysis can be applied within a radiation therapy department. Establishing baseline repeat rates and analyzing reasons for the repeat images can identify opportunities for improvements in terms of patient dose reduction and workflow efficiency for the program. Periodic repeat image analysis also permits monitoring the program for changes and for comparison against rates at other institutions.

Proof-of-concept study of artificial intelligence-assisted review of CBCT image guidance.

PURPOSE: Automation and computer assistance can support quality assurance tasks in radiotherapy. Retrospective image review requires significant human resources, and automation of image review remains a noteworthy missing element in previous work. Here, we present initial findings from a proof-of-concept clinical implementation of an AI-assisted review of CBCT registrations used for patient setup. METHODS: An automated pipeline was developed and executed nightly, utilizing python scripts to interact with the clinical database through DICOM networking protocol and automate data retrieval and analysis. A previously developed artificial intelligence (AI) algorithm scored CBCT setup registrations based on misalignment likelihood, using a scale from 0 (most unlikely) through 1 (most likely). Over a 45-day period, 1357 pre-treatment CBCT registrations from 197 patients were retrieved and analyzed by the pipeline. Daily summary reports of the previous day's registrations were produced. Initial action levels targeted 10% of cases to highlight for in-depth physics review. A validation subset of 100 cases was scored by three independent observers to characterize AI-model performance. RESULTS: Following an ROC analysis, a global threshold for model predictions of 0.87 was determined, with a sensitivity of 100% and specificity of 82%. Inspecting the observer scores for the stratified validation dataset showed a statistically significant correlation between observer scores and model predictions. CONCLUSION: In this work, we describe the implementation of an automated AI-analysis pipeline for daily quantitative analysis of CBCT-guided patient setup registrations. The AI-model was validated against independent expert observers, and appropriate action levels were determined to minimize false positives without sacrificing sensitivity. Case studies demonstrate the potential benefits of such a pipeline to bolster quality and safety programs in radiotherapy. To the authors' knowledge, there are no previous works performing AI-assisted assessment of pre-treatment CBCT-based patient alignment.

Evaluation of a Scintillating Plastic Optical Fiber Device for Measuring kV-Cone Beam Computed Tomography Dose.

BACKGROUND: Justification of imaging procedures such as cone beam computed tomography (CBCT) in radiotherapy makes no doubt. However, the CBCT composite dose is rarely reported or optimized, even though the repeated CBCT cumulative dose can be up to 3% of the prescription dose. This study aimed to evaluate the performance and utility of a new plastic scintillating optical fiber dosimeter for CBCT dosimetric quality assurance (QA) applications before a potential application in patient composite CBCT dosimetry. METHODS: The dosimeter, made of 1 mm diameter plastic fiber, was installed under a linear accelerator treatment table and linked to photodetectors. The fiber impact on the fluence and dose delivered was respectively assessed with an electronic portal imaging device (EPID) and EBT3 Gafchromic® film. The presence of artifacts was visually evaluated on kV images. The dosimeter performances were determined for various acquisition parameters by comparison with ionization chamber values. RESULTS: The maximum impact of the fiber on the fluence measured by the EPID was -1.2% for the 6 MV flattening filter-free beam. However, the fiber did not alter the film dose profile when measured for all the beams tested. The fiber was not visible at energies ≥ 80 kV and was merely visible on the CBCT images. When the rate of images per second or mA was changed, the maximum relative difference between the device and the ionization chamber CTDIs was <5%. Changing collimation led to a -7.2% maximum relative difference with an absolute dose difference that was insignificant (-0.3 mGy). Changing kV was associated with a -8.7% maximum relative difference, as published in the literature. CONCLUSIONS: The dosimeter may be a promising device for CBCT recurrent dosimetry quality control or dose optimization. According to these results, further developments are in progress in order to adapt the solution to the measurement of patient composite CBCT doses.

Recent Advances and Adaptive Strategies in Image Guidance for Cervical Cancer Radiotherapy.

The standard of care for locally advanced cervical cancer is external beam radiotherapy (EBRT) with simultaneous chemotherapy followed by an internal radiation boost. New imaging methods such as positron-emission tomography and magnetic resonance imaging have been implemented into daily practice for better tumor delineation in radiotherapy planning. The method of delivering radiation has changed with technical advances in qualitative imaging and treatment delivery. Image-guided radiotherapy (IGRT) plays an important role in minimizing treatment toxicity of pelvic radiation and provides a superior conformality for sparing the organs at risk (OARs) such as bone marrow, bowel, rectum, and bladder. Similarly, three-dimensional image-guided adaptive brachytherapy (3D-IGABT) with computed tomography (CT) or magnetic resonance imaging (MRI) has been reported to improve target coverage and reduce the dose to normal tissues. Brachytherapy is a complementary part of radiotherapy treatment for cervical cancer and, over the past 20 years, 3D-image-based brachytherapy has rapidly evolved and established itself as the gold standard. With new techniques and adaptive treatment in cervical cancer, the concept of personalized medicine is introduced with an enhanced comprehension of the therapeutic index not only in terms of volume (three-dimensional) but during treatment too (four-dimensional). Current data show promising results with integrated IGRT and IGABT in clinical practice and, therefore, better local control and overall survival while reducing treatment-related morbidity. This review gives an overview of the substantial impact that occurred in the progress of image-guided adaptive external beam radiotherapy and brachytherapy.

Image-guided radiation therapy (IGRT) in prostate cancer in México, survey of SOMERA (Sociedad Mexicana de Radioterapeutas/Mexican Society of Radiation Oncologists) with recommendations on its implementation and process.

Background: Prostate cancer is one of the main tumors worldwide, its treatment is multidisciplinary, includes radiotherapy in all stages: curative, radical, adjuvant, salvage and palliative. Technological advances in planning systems, image acquisition and treatment equipment have allowed the delivery of higher doses limiting toxicity in healthy tissues, distributing radiation optimally and ensuring reproducibility of conditions. Image-guided radiotherapy (IGRT) is not standard in guidelines, only recommended with heterogeneity in its own process. Materials and methods: A survey was conducted to members of the Mexican Society of Radiation Oncologists (SOMERA), to know the current status and make recommendations about its implementation and use, taking into account existing resources. Results: Responses of 541 patients were evaluated, 85% belonged to the intermediate-high risk group, 65% received adjuvant or salvage radiotherapy (RT), 80% received intensity-modulated radiation therapy (IMRT) using doses up to 80 Gy/2 Gy. Cone beam computed tomography (CBCT) was performed on 506 (93.5%), (100% IMRT) and 90% at a periodicity of 3-5/week. 3D treatment with 42% portal images 1/week. Online correction strategies (36% changes before treatment), following a diet and bladder and rectal control. Evidence and recommendations are reviewed. Conclusions: IGRT should be performed in patients with prostate cancer. In Mexico, despite limitations in the distribution of human and technological resources, it is routinely applied. More information is still needed on clinical evidence of its benefits and the process should be implemented according to infrastructure, following institutional guidelines, recommending to report the initial experience that helps to standardize national conduct.

Surface-guided radiotherapy improves rotational accuracy in gynecological cancer patients.

Background: The aim of this study was to determine if rotational uncertainties in gynecological cancer patients can be reduced using surface imaging (SI) compared to aligning three markers on the patient's skin with in-room lasers (marker-laser). Materials and methods: Fifty gynecological cancer patients treated with external-beam radiotherapy were retrospectively analyzed; 25 patients were positioned with marker-laser and 25 patients were positioned with SI. The values of rotational (pitch and roll) deviations of the patient positions between the treatment-planning computed tomography (CT) and online cone-beam computed tomography (CBCT) were collected for both subcohorts and all treatment fractions after performing automatic registration between the two image sets. Statistical analysis of the difference between the two set-up methods was performed using the Mann-Whitney U-test. Results: The median pitch deviation were 1.5° [interquartile range (IQR): 0.6°-2.6°] and 1.1° (IQR: 0.5°-1.9°) for the marker-laser and SI methods, respectively (p < 0.01). The median roll deviation was 0.5° (IQR: 0.2°-0.9°), and 0.7° (IQR: 0.3°-1.2°) for the marker-laser and SI methods, respectively (p < 0.01). Given the shape of the target, pitch deviations had a greater impact on the uncertainty at the periphery of the target and were considered more relevant. Conclusion: By introducing SI as a set-up method in gynecological cancer patients, higher positioning accuracy could be achieved compared with the marker-laser set-up method. This was demonstrated based on residual deviations rather than deviations corrected for by image-guided radiotherapy (IGRT).

[Analysis of Imaging Performance Standards of CBCT X-IGRT System Used in Radiotherapy].

This article briefly describes the imaging performance standards of the kilovolt X-ray image guidance system used in radiotherapy, analyzes the main aspects that should be considered in the image quality of X-IGRT system, and focuses on parameters that should be considered in the imaging performance evaluation criteria of the CBCT X-IGRT. The purpose is to sort out the imaging performance evaluation standards of kilovolt X-IGRT system, clarify the image quality requirements of X-IGRT equipment, and reach a consensus when evaluating the imaging performance of X-IGRT system.

Health-related quality of life in primary immunodeficiencies: Impact of delayed diagnosis and treatment burden.

Accurate and timely diagnosis of primary immunodeficiencies (PID) is an ongoing effort. Individuals with PID can be severely impacted by their disease and many experience chronic complications, treatment burden, and reduced quality of life (QoL). This review focuses on the impact of delayed diagnosis and treatment burden on patient QoL and outcomes. Adults tend to experience longer delays in diagnosis than pediatric populations. The median diagnostic delay has reduced over recent decades, but remains high for some antibody deficiency variants, such as common variable immunodeficiency. The largest burden impacting QoL tends to be poorly controlled disease and persistent chronic conditions rather than treatment burden. Hospitalization, physician/emergency room visits, and bronchiectasis were the most expensive PID complications prior to diagnosis and cost analyses estimate cost reductions once appropriate treatment is initiated. A combination of poor awareness, lack of infrastructure, and resources supporting national registries play a major role in delayed diagnosis.

Single-isocenter stereotactic non-coplanar arc treatment of 200 patients with brain metastases: multileaf collimator size and setup uncertainties.

PURPOSE: The purpose of this study was to evaluate our 2 years' experience with single-isocenter, non-coplanar, volumetric modulated arc therapy (VMAT) for brain metastasis (BM) stereotactic radiosurgery (SRS). METHODS: A total of 202 patients treated with the VMAT SRS solution were analyzed retrospectively. Plan quality was assessed for 5 mm (120) and 2.5 mm (high-definition, HD) central leaf width multileaf collimators (MLCs). For BMs at varying distances from the plan isocenter, the geometric offset from the ideal position for two image-guided radiotherapy workflows was calculated. In the workflow with ExacTrac (BrainLAB, München, Germany; W­ET), patient positioning errors were corrected at each couch rotation. In the workflow without ExacTrac (W-noET), only the initial patient setup correction was considered. The dose variation due to rotational errors was simulated for multiple-BM plans with the HD-MLC. RESULTS: Plan conformity and quality assurance were equivalent for plans delivered with the two MLCs while the HD-MLC plans provided better healthy brain tissue (BmP) sparing. 95% of the BMs had residual intrafractional setup errors ≤ 2 mm for W­ET and 68% for W­noET. For small BM (≤1 cc) situated >3 cm from the plan isocenter, the dose received by 95% of the BM decreased in median (interquartile range) by 6.3% (2.8-8.8%) for a 1-degree rotational error. CONCLUSION: This study indicates that the HD-MLC is advantageous compared to the 120-MLC for sparing healthy brain tissue. When a 2-mm margin is applied, W­noET is sufficient to ensure coverage of BM situated ≤ 3 cm of the plan isocenter, while for BM further away, W­ET is recommended.

Immunoglobulin replacement therapy in chronic lymphocytic leukaemia patients with hypogammaglobulinaemia and infection.

OBJECTIVES: To analyse total national utilisation of immunoglobulin (Ig) replacement therapy (IgRT) for Chronic Lymphocytic Leukaemia patients with acquired hypogammaglobulinaemia and severe and/or recurrent bacterial infections. METHODS: In 2007, the National Blood Authority first published Criteria for the clinical use of intravenous immunoglobulin in Australia. The Australian Red Cross Lifeblood assessed, approved, and recorded all supply with patient demographics, distribution data, intravenous Ig (IVIg) volumes and treatment episodes. IVIg was the sole product used in Australia from 2008-2013 inclusive. RESULTS: From 2008 to 2013 across Australia, 2734 individual CLL patients received 48,870 treatment episodes using a total 1,324,926 g of IVIg therapy. Six IVIg products were available, with domestically manufactured Intragam® P accounting for 89.7% of supply. The average age for first dose was 74 years. Males received 60.6% of the total treatment episodes representing 20% more than females. The average pre-treatment IgG level was 4.03 ± 2.03 g/L (range 0.30-10.50 g/L). A sustained average annual increased IVIg utilisation of 5.5% was observed. There was significant regional variation consistent with differences in prescriber preferences across states and territories. CONCLUSION: This study provides a globally unique insight into IgRT supply and demand in CLL patients by analysis of total national use in Australia over a 6-year period.

Using previously registered cone beam computerized tomography images to facilitate online computerized tomography to cone beam computerized tomography image registration in lung stereotactic body radiation therapy.

PURPOSE: In our conventional image registration workflow, the four-dimensional (4D) CBCT was directly registered to the reference helical CT (HCT) using a dual registration approach within the Elekta XVI software. In this study, we proposed a new HCT-CBCT auto-registration strategy using a previously registered CBCT (CBCTpre) as the reference image and tested its clinical feasibility. METHODS: From a previous CBCT session, the registered average 4D CBCT was selected as CBCTpre and the HCT-CBCTpre registration vector from the clinician's manual registration result was recorded. In the new CBCT session, auto-registration was performed between the new average 4D CBCT (CBCTtx) and CBCTpre (CBCTpre-CBCTtx). The overall HCT-CBCTtx registration result was then derived by combing the results from two registrations (i.e., HCT-CBCTpre + CBCTpre-CBCTtx). The results from the proposed method were compared with clinician's manually adjusted HCT-CBCTtx registration results ("ground truth") to evaluate its accuracy using a test dataset consisting of 32 challenging registration cases. RESULTS: The uncertainty of the proposed auto-registration method was -0.1 ± 0.5, 0.1 ± 1.0, and -0.1 ± 0.7 mm in three translational directions (lateral, longitudinal, and vertical) and 0.0° ± 0.9°, 0.3° ± 0.9°, and 0.4° ± 0.7° in three rotation directions, respectively. Two patients (6.3%) had translational uncertainty > 2 mm (max = 3.1 mm) and both occurred in the longitudinal direction. Meanwhile, the uncertainty of the conventional direct HCT-CBCTtx auto-registration was -0.4 ± 2.6, -0.2 ± 7.4, -1.4 ± 3.6 mm for translations and -0.3° ± 1.2°, 0.0° ± 1.6°, and 0.1 ± 1.1° for rotations. Eleven patients (34.4%) had translation uncertainty > 2 mm (max = 26.2 mm) in at least one direction. Accuracy in translation was improved with the new method, while rotation accuracy stayed in the same order. CONCLUSION: We demonstrated the feasibility of incorporating prior clinical registration knowledge into the online HCT-CBCT registration process. The proposed auto-registration method provides a quick and reliable starting solution for online HCT-CBCT registration.

Offline generator for digitally reconstructed radiographs of a commercial stereoscopic radiotherapy image-guidance system.

PURPOSE: Image-guided radiotherapy (IGRT) research sometimes involves simulated changes to patient positioning using retrospectively collected clinical data. For example, researchers may simulate patient misalignments to develop error detection algorithms or positioning optimization algorithms. The Brainlab ExacTrac system can be used to retrospectively "replay" simulated alignment scenarios but does not allow export of digitally reconstructed radiographs (DRRs) with simulated positioning variations for further analysis. Here we describe methods to overcome this limitation and replicate ExacTrac system DRRs by using projective geometry parameters contained in the ExacTrac configuration files saved for every imaged subject. METHODS: Two ExacTrac DRR generators were implemented, one with custom MATLAB software based on first principles, and the other using libraries from the Insight Segmentation and Registration Toolkit (ITK). A description of perspective projections for DRR rendering applications is included, with emphasis on linear operators in real projective space P 3 ${\mathbb{P}^3}$ . We provide a general methodology for the extraction of relevant geometric values needed to replicate ExacTrac DRRs. Our generators were tested on phantom and patient images, both acquired in a known treatment position. We demonstrate the validity of our methods by comparing our generated DRRs to reference DRRs produced by the ExacTrac system during a treatment workflow using a manual landmark analysis as well as rigid registration with the elastix software package. RESULTS: Manual landmarks selected between the corresponding DRR generators across patient and phantom images have an average displacement of 1.15 mm. For elastix image registrations, we found that absolute value vertical and horizontal translations were 0.18 and 0.35 mm on average, respectively. Rigid rotations were within 0.002 degrees. CONCLUSION: Custom and ITK-based algorithms successfully reproduce ExacTrac DRRs and have the distinctive advantage of incorporating any desired 6D couch position. An open-source repository is provided separately for users to implement in IGRT patient positioning research.

Characterization of imaging performance of a novel helical kVCT for use in image-guided and adaptive radiotherapy.

ClearRT helical kVCT imaging for the Radixact helical tomotherapy system recently received FDA approval and is available for clinical use. The system is intended to enhance image fidelity in radiation therapy treatment planning and delivery compared to the prior MV-based onboard imaging approach. The purpose of this work was to characterize the imaging performance of this system and compare this performance with that of clinical systems used in image-guided and/or adaptive radiotherapy (ART) or computed tomography (CT) simulation, including Radixact MVCT, TomoTherapy MVCT, Varian TrueBeam kV OBI CBCT, and the Siemens SOMATOM Definition Edge kVCT. A CT image quality phantom was scanned across clinically relevant acquisition modes for each system to evaluate image quality metrics, including noise, uniformity, contrast, spatial resolution, and CT number linearity. Similar noise levels were observed for ClearRT and Siemens Edge, whereas noise for the other systems was ∼1.5-5 times higher. Uniformity was best for Siemens Edge, whereas most scans for ClearRT exhibited a slight "cupping" or "capping" artifact. The ClearRT and Siemens Edge performed best for contrast metrics, which included low-contrast visibility and contrast-to-noise ratio evaluations. Spatial resolution was best for TrueBeam and Siemens Edge, whereas the three kVCT systems exhibited similar CT number linearity. Overall, these results provide an initial indication that ClearRT image quality is adequate for image guidance in radiotherapy and sufficient for delineating anatomic structures, thus enabling its use for ART. ClearRT also showed significant improvement over MVCT, which was previously the only onboard imaging modality available on Radixact. Although the acquisition of these scans does come at the cost of additional patient dose, reported CTDI values indicate a similar or generally reduced machine output for ClearRT compared to the other systems while maintaining comparable or improved image quality overall.

ExacTrac Dynamic workflow evaluation: Combined surface optical/thermal imaging and X-ray positioning.

In modern radiotherapy (RT), especially for stereotactic radiotherapy or stereotactic radiosurgery treatments, image guidance is essential. Recently, the ExacTrac Dynamic (EXTD) system, a new combined surface-guided RT and image-guided RT (IGRT) system for patient positioning, monitoring, and tumor targeting, was introduced in clinical practice. The purpose of this study was to provide more information about the geometric accuracy of EXTD and its workflow in a clinical environment. The surface optical/thermal- and the stereoscopic X-ray imaging positioning systems of EXTD was evaluated and compared to cone-beam computed tomography (CBCT). Additionally, the congruence with the radiation isocenter was tested. A Winston Lutz test was executed several times over 1 year, and repeated end-to-end positioning tests were performed. The magnitude of the displacements between all systems, CBCT, stereoscopic X-ray, optical-surface imaging, and MV portal imaging was within the submillimeter range, suggesting that the image guidance provided by EXTD is accurate at any couch angle. Additionally, results from the evaluation of 14 patients with intracranial tumors treated with open-face masks are reported, and limited differences with a maximum of 0.02 mm between optical/thermal- and stereoscopic X-ray imaging were found. As the optical/thermal positioning system showed a comparable accuracy to other IGRT systems, and due to its constant monitoring capability, it can be an efficient tool for detecting intra-fractional motion and for real-time tracking of the surface position during RT.