Reversible in Situ Control over Monolayer Organization.

Cr2+ and Cr3+ ions are shown to mediate the formation, morphology, and organization of arachidic acid (AA) Langmuir-Blodgett (LB) monolayers. This finding, based on cyclic voltammetry (CV), linear sweep voltammetry (LSV) and fluorescence recovery after photobleaching (FRAP) measurements, show that Langmuir monolayer formation depends on subphase pH and metal ion concentration. Following monolayer deposition on ITO, the LB monolayer organization can be modified reversibly through control of the Cr oxidation state, which has not been shown before by other monolayers formed with other divalent metal ions. The dynamics and the mobility of a chromophore (perylene) incorporated into the monolayer sense changes in Cr oxidation state-dependent organization of the LB monolayer. Demonstrating reversible changes in monolayer organization provides an opportunity to control chemical and electron access to the interface support.

Thermodynamic Study on Biomimetic Legionella gormanii Bacterial Membranes.

The presented studies were aimed at determining the interactions in model membranes (Langmuir monolayers) created of phospholipids (PL) isolated from Legionella gormanii bacteria cultured with (PL + choline) or without (PL - choline) choline and to describe the impact of an antimicrobial peptide, human cathelicidin LL-37, on PL's monolayer behavior. The addition of choline to the growth medium influenced the mutual proportions of phospholipids extracted from L. gormanii. Four classes of phospholipids-phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylglycerol (PG), cardiolipin (CL), and their mixtures-were used to register compression isotherms with or without the LL-37 peptide in the subphase. Based on them the excess area (Ae), excess (ΔGe), and total (ΔGm) Gibbs energy of mixing were determined. The thermodynamic analyses revealed that the PL - choline monolayer showed greater repulsive forces between molecules in comparison to the ideal system, while the PL + choline monolayer was characterized by greater attraction. The LL-37 peptide affected the strength of interactions between phospholipids' molecules and reduced the monolayers stability. Accordingly, the changes in interactions in the model membranes allowed us to determine the difference in their susceptibility to the LL-37 peptide depending on the choline supplementation of bacterial culture.

Effect of γ-Oryzanol on the LE-LC Phase Coexistence Region of DPPC Langmuir Monolayer.

We have studied the effect of relative composition of γ-Oryzanol (γ-Or) on the liquid expanded-liquid condensed phase coexistence region in the mixed Langmuir monolayer of γ-Or and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) molecules at air-water interface. The surface manometry studies at a fixed temperature show that the mixture of γ-Or and DPPC forms a stable monolayer at air-water interface. As the relative composition of γ-Or increases the range of area per molecule over which the coexistence of liquid expanded (LE)-liquid condensed (LC) phases exists reduces. Although the LE-LC phase coexistence corresponds to the first-order phase transition, the slope of the surface pressure-area per molecule isotherm is non-zero. Earlier studies have attributed the non-zero slope in LE-LC phase coexistence region to the influence of the strain between the ordered LC phase and disordered LE phase. The effect of strain on the coexistence of LE-LC phases can be studied in terms of molecular density-strain coupling. Our analysis of the liquid condensed-liquid expanded coexistence region in the isotherms of mixed monolayers of DPPC and γ-Or shows that with the increase in the mole fraction of sterol in the mixed monolayer the molecular lateral density-strain coupling increases. However, at 0.6 mole fraction of γ-Or in the mixed monolayer the coupling decreases. This is corroborated by the observation of minimum Gibb's free energy of the mixed monolayer at this relative composition of γ-Or indicating better packing of molecules.

Favourable Interfacial Characteristics of A2 Milk Protein Monolayer.

Shielding of the specific body organ using the biocompatible material helps preventing direct exposure of that part to the foreign entities responsible for infections. Here we show the potential of the A2 milk protein recovered from the milk of cow from Indian origin for possible prevention of the direct exposure to other foreign molecules. We measured the surface pressure of the monolayers of different types of protein samples using Langmuir isotherm experiments. The surface pressure measurements for the monolayer of four types of protein macromolecules have been carried out using the Wilhelmy plate micro pressure sensor. We studied the self-organization of different protein macromolecules and their monolayer compression characteristics. The electrochemical behaviour is studied using electrochemical impedance spectroscopy. We found the highest surface pressure for the monolayer of A2 protein. Further, it is also found that A2 protein exhibited the highest surface activity amongst the other proteins. This property can be effectively used for making the envelope of the A2 protein surrounding the targeted entity.

Effect of Trastuzumab on the thermodynamic behavior and roughness of fluid membrane using unsaturated phospholipid/cholesterol mixed monolayer model.

The microenvironment near the receptor on biological membrane plays an important role in regulating drug-receptor interaction, and the interaction between drugs and lipids on membrane can also affect the microenvironment of membrane, which may affect drugs' efficacy or cause the drug resistance. Trastuzumab (Tmab) is a monoclonal antibody, used to treat early breast cancer associated with the overexpression of Human Epidermal growth factor Receptor 2 (HER2). But its effectiveness is limited due to its tendency to make tumor cells resistant to the drug. In this work, the monolayer mixed by unsaturated phospholipids (DOPC, DOPE and DOPS) and cholesterol were used as a model to simulate the fluid membrane region on biological membrane. The phospholipid/cholesterol mixed monolayers in molar ratio 7:3 and 1:1, were respectively used to simulate the one layer of simplified normal cell membrane and tumor cell membrane. The influence of this drug on the phase behavior, elastic modulus, intermolecular force, relaxation and the surface roughness of the unsaturated phospholipid/cholesterol monolayer was investigated. The results show that at 30 mN/m the increase or decrease of the elastic modulus and surface roughness of the mixed monolayer caused by Tamb depends on the type of phospholipid, but the intensity of the effect depends on the content of cholesterol, and the intensity of influence is more significant at the presence of 50% cholesterol. However, the effect of Tmab on the ordering of the DOPC/cholesterol or DOPS/cholesterol mixed monolayer is stronger when the content of cholesterol is 30%, but it was stronger for the DOPE/cholesterol mixed monolayer when the content of cholesterol is 50%. This study is helpful to understand the effects of anticancer drugs on microenvironment of cell membrane, and it has a certain reference value for the design of drug delivery system and drug target identification.

Insight into the Mechanism of Interactions between the LL-37 Peptide and Model Membranes of Legionella gormanii Bacteria.

Legionella gormanii is a fastidious, Gram-negative bacterium known to be the etiological agent of atypical community-acquired pneumonia. The human cathelicidin LL-37 exhibits a dose-dependent bactericidal effect on L. gormanii. The LL-37 peptide at the concentration of 10 µM causes the bacteria to become viable but not cultured. The antibacterial activity of the peptide is attributed to its effective binding to the bacterial membrane, as demonstrated by the fluorescence lifetime imaging microscopy. In this study, to mimic the L. gormanii membranes and their response to the antimicrobial peptide, Langmuir monolayers were used with the addition of the LL-37 peptide to the subphase of the Langmuir trough to represent the extracellular fluid. The properties of the model membranes (Langmuir monolayers) formed by phospholipids (PL) isolated from the L. gormanii bacteria cultured on the non-supplemented (PL-choline) and choline-supplemented (PL+choline) medium were determined, along with the effect of the LL-37 peptide on the intermolecular interactions, packing, and ordering under the monolayer compression. Penetration tests at the constant surface pressure were carried out to investigate the mechanism of the LL-37 peptide action on the model membranes. The peptide binds to the anionic bacterial membranes preferentially, due to its positive charge. Upon binding, the LL-37 peptide can penetrate into the hydrophobic tails of phospholipids, destabilizing membrane integrity. The above process can entail membrane disruption and ultimately cell death. The ability to evoke such a great membrane destabilization is dependent on the share of electrostatic, hydrogen bonding and Lifshitz-van der Waals LL-37-PL interactions. Thus, the LL-37 peptide action depends on the changes in the lipid membrane composition caused by the utilization of exogenous choline by the L. gormanii.

Evaluation of the Effect of Antibacterial Peptides on Model Monolayers.

The aim of the study was to assess the effect of the synthesized antibacterial peptides: P2 (WKWK)2-KWKWK-NH2, P4 (C12)2-KKKK-NH2, P5 (KWK)2-KWWW-NH2, and P6 (KK)2-KWWW-NH2 on the physicochemical properties of a model biological membrane made of azolectin or lecithin. The Langmuir Wilhelmy method was used for the experiments. Based on the compressibility factor, it was determined that the monolayers formed of azolectin and peptides in the aqueous subphase are in the condensed liquid phase. At the boundary between the condensed and expanded liquid phases, there was a monolayer made of lecithin and P4, P5 or P6 in the aqueous subphase. In turn, the film consisting of lecithin alone (37.7 mN/m) and lecithin and P2 (42.6 mN/m) in the water subphase was in the expanded liquid phase. All peptides change, to varying degrees, the organization and packing of molecules in the monolayer, both those made of azolectin and of lecithin. The test results can be used for further research to design a system with the expected properties for specific organisms.

Effect of Newly Synthesized Structures of Peptides on the Stability of the Monolayers Formed.

The aim of the study was to evaluate the effect of the peptide structure (WKWK)2-KWKWK-NH2, P4 (C12)2-KKKK-NH2, P5 (KWK)2-KWWW-NH2, P6 (KK)2-KWWW-NH2 on their physicochemical properties. The thermogravimetric method (TG/DTG) was used, which made it possible to observe the course of chemical reactions and phase transformations occurring during the heating of solid samples. Based on the DSC curves, the enthalpy of the processes occurring in the peptides was determined. The influence of the chemical structure of this group of compounds on their film-forming properties was determined using the Langmuir-Wilhelmy trough method and was followed by molecular dynamics simulation. Evaluated peptides showed high thermal stability and the first significant mass loss occurred only at about 230 °C and 350 °C. The analysis of the compressibility coefficient of individual peptides indicates that all formed peptide monolayers were in the expanded liquid phase. Their maximum compressibility factor was less than 50.0 mN/m. Its highest value of 42.7 mN/m was achieved in a monolayer made of P4. The results obtained in molecular dynamic simulation indicate that non-polar side chains played an important role in the properties of the P4 monolayer, and the same applies to P5, except that a spherical effect was observed here. A slightly different behavior was observed for the P6 and P2 peptide systems, where the type of amino acids present had an influence. The obtained results indicate that the structure of the peptide affected its physicochemical and layer-forming properties.

Effect of Amphotericin B on the Thermodynamic Properties and Surface Morphology of the Pulmonary Surfactant Model Monolayer during Respiration.

During the COVID-19 pandemic, the treatment of pulmonary fungal infection faced noteworthy challenges. Amphotericin B has shown promising therapeutic effects as an inhalation treatment for pulmonary fungal infections, especially those associated with the COVID-19 virus, due to its rare resistance. However, because the drug frequently produces renal toxicity, its effective dose is limited in clinical use. In this work, the DPPC/DPPG mixed monolayer was used as the pulmonary surfactant monolayer to study the interaction between amphotericin B and the pulmonary surfactant monolayer during inhalation therapy using the Langmuir technique and atomic force microscopy. The effects of different molar ratios of AmB on the thermodynamic properties and surface morphology of the pulmonary surfactant monolayer at different surface pressures was evaluated. The results showed that when the molar ratio of AmB to lipids in the pulmonary surfactant was less than 1:1, the main intermolecular force was attractive at a surface pressure greater than 10 mN/m. This drug had little effect on the phase transition point of the DPPC/DPPG monolayer, but decreased the height of the monolayer at 15 mN/m and 25 mN/m. When the molar ratio of AmB to lipids was greater than 1:1, the intermolecular force was mainly repulsive at a surface pressure greater than 15 mN/m, and AmB increased the height of the DPPC/DPPG monolayer at both 15 mN/m and 25 mN/m. These results are helpful in understanding the interaction between the pulmonary surfactant model monolayer and different doses of drugs at various surface tensions during respiration.

Influence of InP/ZnS Quantum Dots on Thermodynamic Properties and Morphology of the DPPC/DPPG Monolayers at Different Temperatures.

In this work, the effects of InP/ZnS quantum dots modified with amino or carboxyl group on the characteristic parameters in phase behavior, elastic modulus, relaxation time of the DPPC/DPPG mixed monolayers are studied by the Langmuir technology at the temperature of 37, 40 and 45 °C. Additionally, the information on the morphology and height of monolayers are obtained by the Langmuir-Bloggett technique and atomic force microscope technique. The results suggest that the modification of the groups can reduce the compressibility of monolayers at a higher temperature, and the most significant effect is the role of the amino group. At a high temperature of 45 °C, the penetration ability of InP/ZnS-NH2 quantum dots in the LC phase of the mixed monolayer is stronger. At 37 °C and 40 °C, there is no clear difference between the penetration ability of InP/ZnS-NH2 quantum dots and InP/ZnS-COOH quantum dots. The InP/ZnS-NH2 quantum dots can prolong the recombination of monolayers at 45 °C and accelerate it at 37 °C and 40 °C either in the LE phase or in the LC phase. However, the InP/ZnS-COOH quantum dots can accelerate it in the LE phase at all temperatures involved but only prolong it at 45 °C in the LC phase. This work provides support for understanding the effects of InP/ZnS nanoparticles on the structure and properties of cell membranes, which is useful for understanding the behavior about the ingestion of nanoparticles by cells and the cause of toxicity.

Preparation of Thin Films Containing Modified Hydroxyapatite Particles and Phospholipids (DPPC) for Improved Properties of Biomaterials.

The main aims of thin biofilm synthesis are to either achieve a new form to promote the transport of drugs in oral delivery systems or as a coating to improve the biocompatibility of the implant's surface. In this study, the Langmuir monolayer technique was employed to obtain films containing Mg-doped hydroxyapatite with 0.5%, 1.0%, and 1.5% Mg(II). The obtained modified HA particles were analysed via the FT-IR, XRD, DLS, and SEM methods. It was shown that the modified hydroxyapatite particles were able to form thin films at the air/water interface. BAM microscopy was employed to characterized the morphology of these films. In the next step, the mixed films were prepared using phospholipid (DPPC) molecules and modified hydroxyapatite particles (HA-Mg(II)). We expected that the presence of phospholipids (DPPC) in thin films improved the biocompatibility of the preparing films, while adding HA-Mg(II) particles will promote antibacterial properties and enhance osteogenesis processes. The films were prepared in two ways: (1) by mixing DPPC and HA-Mg (II) and spreading this solution onto the subphase, or (2) by forming DPPC films, dropping the HA-Mg (II) dispersion onto the phospholipid monolayer. Based on the obtained π-A isotherms, the surface parameters of the achieved thin films were estimated. It was observed that the HA-Mg(II) films can be stabilized with phospholipid molecules, and a more stable structure was obtained from films synthesied via method (2).

Study of Interactions between Saponin Biosurfactant and Model Biological Membranes: Phospholipid Monolayers and Liposomes.

The aim of this study was to determine the effect of saponins-rich plant extract on two model biological membranes: phospholipid monolayers and liposomes. The Langmuir monolayer technique was used to study the interactions of model phospholipid membranes with saponins. The π-A isotherms were determined for DPPE (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine) monolayer with the addition of various concentrations of licorice saponins extracts and subjected to qualitative as well as quantitative analysis. Additionally, relaxation studies of the obtained monolayers were carried out and morphological changes were examined using Brewster angle microscopy. Moreover, changes in the structure of phospholipid vesicles treated with solutions of saponins-rich plant extracts were assessed using the FTIR technique. The size and zeta potential of the liposomes were estimated based on DLS methods. The obtained results indicated that the saponins interact with the phospholipid membrane formed by DPPE molecules and that the stability of the mixed DPPE/saponins monolayer strongly depends on the presence of impurities in saponins. Furthermore, it was found that the plant extract rich in saponins biosurfactant interacts mainly with the hydrophilic part of liposomes.

Biophysical analysis of the plant-specific GIPC sphingolipids reveals multiple modes of membrane regulation.

The plant plasma membrane (PM) is an essential barrier between the cell and the external environment, controlling signal perception and transmission. It consists of an asymmetrical lipid bilayer made up of three different lipid classes: sphingolipids, sterols, and phospholipids. The glycosyl inositol phosphoryl ceramides (GIPCs), representing up to 40% of total sphingolipids, are assumed to be almost exclusively in the outer leaflet of the PM. However, their biological role and properties are poorly defined. In this study, we investigated the role of GIPCs in membrane organization. Because GIPCs are not commercially available, we developed a protocol to extract and isolate GIPC-enriched fractions from eudicots (cauliflower and tobacco) and monocots (leek and rice). Lipidomic analysis confirmed the presence of trihydroxylated long chain bases and 2-hydroxylated very long-chain fatty acids up to 26 carbon atoms. The glycan head groups of the GIPCs from monocots and dicots were analyzed by gas chromatograph-mass spectrometry, revealing different sugar moieties. Multiple biophysics tools, namely Langmuir monolayer, ζ-Potential, light scattering, neutron reflectivity, solid state 2H-NMR, and molecular modeling, were used to investigate the physical properties of the GIPCs, as well as their interaction with free and conjugated phytosterols. We showed that GIPCs increase the thickness and electronegativity of model membranes, interact differentially with the different phytosterols species, and regulate the gel-to-fluid phase transition during temperature variations. These results unveil the multiple roles played by GIPCs in the plant PM.

Effect of Silica Microparticles on Interactions in Mono- and Multicomponent Membranes.

Advancing our understanding of the mechanism of the interaction between inhaled pollutant microparticles and cell membrane components is useful to study the impact of fine particulate matter on human health. In this paper, we focus on the effect of cholesterol (Chol) molecules on the surface properties of a model membrane in the presence of silica microparticles (MPs). Mixed monolayers containing phospholipid-dipalmitoylphosphatidylcholine (DPPC), Chol and silica particle dispersions (MPs; 0.033% w/w, 0.33% w/w and 0.83% w/w) were formed and studied using the Langmuir monolayer technique complemented by Brewster Angle Microscopy (BAM) images. It was shown that Chol caused a condensation of the DPPC monolayer, which influenced the penetration of MPs and their interactions with the model membrane. The relaxation experiments of the lipid-MP monolayer proved that the presence of Chol molecules in the monolayer led to the formation of lipid and MP complexes. Strong interactions between Chol and MPs contributed to the formation of more stable monolayers. The presented results can be useful to better comprehend the interaction between particulate materials and the lipid components of biomembranes.

Interactions between Phosphatidylcholine and Kaempferol or Myristicin: Langmuir Monolayers and Microelectrophoretic Studies.

Flavonoid compounds are known for their antibacterial, anti-inflammatory, and anticancer properties. Therefore, they can influence membrane properties that interest us, modifying both their structure and functions. We used kaempferol (K) and myricetin (M) as representatives of this group. We investigated the influence of the abovementioned compounds on model cell membranes' properties (i.e., Langmuir monolayers and liposomes). The basic research methods used in these studies were the Langmuir method with Brewster angle microscopy and microelectrophoresis. The π-A isotherms were registered for the pure components and mixtures of these compounds with phosphatidylcholine (PC) in appropriate volume ratios. Using mathematical equations, we established that kaempferol, myricetin, and the lipids formed complexes at 1:1 ratios. We derived the parameters characterizing the formed complexes, i.e., the surfaces occupied by the complexes and the stability constants of the formed complexes. Using the microelectrophoretic method, we determined the dependence of the lipid membranes' surface charge density as a function of the pH (in the range of 2 to 10) of the electrolyte solution. The presented results indicate that the PC membrane's modification with kaempferol or myricetin affected changes in the surface charge density and isoelectric point values.

Interactions of Truncated Menaquinones in Lipid Monolayers and Bilayers.

Menaquinones (MK) are hydrophobic molecules that consist of a naphthoquinone headgroup and a repeating isoprenyl side chain and are cofactors used in bacterial electron transport systems to generate cellular energy. We have previously demonstrated that the folded conformation of truncated MK homologues, MK-1 and MK-2, in both solution and reverse micelle microemulsions depended on environment. There is little information on how MKs associate with phospholipids in a model membrane system and how MKs affect phospholipid organization. In this manuscript, we used a combination of Langmuir monolayer studies and molecular dynamics (MD) simulations to probe these questions on truncated MK homologues, MK-1 through MK-4 within a model membrane. We observed that truncated MKs reside farther away from the interfacial water than ubiquinones are are located closer to the phospholipid tails. We also observed that phospholipid packing does not change at physiological pressure in the presence of truncated MKs, though a difference in phospholipid packing has been observed in the presence of ubiquinones. We found through MD simulations that for truncated MKs, the folded conformation varied, but MKs location and association with the bilayer remained unchanged at physiological conditions regardless of side chain length. Combined, this manuscript provides fundamental information, both experimental and computational, on the location, association, and conformation of truncated MK homologues in model membrane environments relevant to bacterial energy production.

Advantageous/Unfavorable Effect of Quercetin on the Membranes of SK-N-SH Neuroblastoma Cells.

Quercetin is a polyphenolic compound, the effects of which raise scientists' doubts. The results of many experiments show that it has anticancer, antiinflammatory, and antioxidant properties, while other studies indicate its pro-oxidative and cytotoxic action. This compound can react with reactive oxygen species, and due to its chemical properties, it can be found in the hydrophobic-hydrophilic area of cells. These features of quercetin indicate that its action in cells will be associated with the modification of membranes and its participation in maintaining the redox balance. Therefore, this study distinguishes these two mechanisms and determines whether they are important for cell function. We check: (1) Whether the selected concentrations of quercetin are cytotoxic and destructive for SK-N-SH cell membranes (MTT, LDH, MDA tests) in situations with and without the applied oxidative stress; (2) what is the level of changes in the structural/mechanical properties of the lipid part of the membranes of these cells due to the presence of polyphenol molecules; and (3) whether the antioxidative action of quercetin protects the membrane against its modification. Our results show that changes in the stiffness/elasticity of the lipid part of the membrane constitute the decisive mechanism of action of quercetin, potentially influencing cellular processes whose initial stages are associated with membranes (e.g., reception of signals from the environment, transport).

Incorporation of Molecular Reorientation into Modeling Surface Pressure-Area Isotherms of Langmuir Monolayers.

Langmuir monolayers can be assembled from molecules that change from a low-energy orientation occupying a large cross-sectional area to a high-energy orientation of small cross-sectional area as the lateral pressure grows. Examples include cyclosporin A, amphotericin B, nystatin, certain alpha-helical peptides, cholesterol oxydation products, dumbbell-shaped amphiphiles, organic-inorganic nanoparticles and hybrid molecular films. The transition between the two orientations leads to a shoulder in the surface pressure-area isotherm. We propose a theoretical model that describes the shoulder and can be used to extract the energy cost per molecule for the reorientation. Our two-state model is based on a lattice-sublattice approximation that hosts the two orientations and a corresponding free energy expression which we minimize with respect to the orientational distribution. Inter-molecular interactions other than steric repulsion are ignored. We provide an analysis of the model, including an analytic solution for one specific lateral pressure near a point of inflection in the surface pressure-area isotherm, and an approximate solution for the entire range of the lateral pressures. We also use our model to estimate energy costs associated with orientational transitions from previously reported experimental surface pressure-area isotherms.

Spin Crossover in Nickel(II) Tetraphenylporphyrinate via Forced Axial Coordination at the Air/Water Interface.

Coordination-induced spin crossover (CISCO) in nickel(II) porphyrinates is an intriguing phenomenon that is interesting from both fundamental and practical standpoints. However, in most cases, realization of this effect requires extensive synthetic protocols or extreme concentrations of extra-ligands. Herein we show that CISCO effect can be prompted for the commonly available nickel(II) tetraphenylporphyrinate, NiTPP, upon deposition of this complex at the air/water interface together with a ruthenium(II) phthalocyaninate, CRPcRu(pyz)2, bearing two axial pyrazine ligands. The latter was used as a molecular guiderail to align Ni···Ru···Ni metal centers for pyrazine coordination upon lateral compression of the system, which helps bring the two macrocycles closer together and forces the formation of Ni-pyz bonds. The fact of Ni(II) porphyrinate switching from low- to high-spin state upon acquiring additional ligands can be conveniently observed in situ via reflection-absorption UV-vis spectroscopy. The reversible nature of this interaction allows for dissociation of Ni-pyz bonds, and thus, change of nickel cation spin state, upon expansion of the monolayer.

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers.

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([Cn -mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir-Blodgett films. It is inferred from the surface pressure-area isotherms that C16 -mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C4 - and C8 -mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C8 - or C16 -mim-IL is present in the mixed films.