Leaf anatomy does not explain the large variability of mesophyll conductance across C3 crop species.

Increasing mesophyll conductance of CO2 (gm ) is a strategy to improve photosynthesis in C3 crops. However, the relative importance of different anatomical traits in determining gm in crops is unclear. Mesophyll conductance measurements were performed on 10 crops using the online carbon isotope discrimination method and the 'variable J' method in parallel. The influences of crucial leaf anatomical traits on gm were evaluated using a one-dimensional anatomical CO2 diffusion model. The gm values measured using two independent methods were compatible, although significant differences were observed in their absolute values. Quantitative analysis showed that cell wall thickness and chloroplast stroma thickness are the most important elements along the diffusion pathway. Unexpectedly, the large variability of gm across crops was not associated with any investigated leaf anatomical traits except chloroplast thickness. The gm values estimated using the anatomical model differed remarkably from the values measured in vivo in most species. However, when the species-specific effective porosity of the cell wall and the species-specific facilitation effect of CO2 diffusion across the membrane and chloroplast stoma were taken into account, the model could output gm values very similar to those measured in vivo. These results indicate that gm variation across crops is probably also driven by the effective porosity of the cell wall and effects of facilitation of CO2 transport across the membrane and chloroplast stroma in addition to the thicknesses of the elements.

Identification and characterization of a new species of Taxus - Taxus qinlingensis by multiple taxonomic methods.

BACKGROUND: The taxonomy of Taxus Linn. remains controversial due to its continuous phenotypic variation and unstable topology, thus adversely affecting the formulation of scientific conservation strategies for this genus. Recently, a new ecotype, known as Qinling type, is mainly distributed in the Qinling Mountains and belongs to a monophyletic group. Here, we employed multiple methods including leaf phenotype comparison (leaf shapes and microstructure), DNA barcoding identification (ITS + trnL-trnF + rbcL), and niche analysis to ascertain the taxonomic status of the Qinling type. RESULTS: Multiple comparisons revealed significant differences in the morphological characters (length, width, and length/width ratio) among the Qinling type and other Taxus species. Leaf anatomical analysis indicated that only the Qinling type and T. cuspidata had no papilla under the midvein or tannins in the epicuticle. Phylogenetic analysis of Taxus indicated that the Qinling type belonged to a monophyletic group. Moreover, the Qinling type had formed a relatively independent niche, it was mainly distributed around the Qinling Mountains, Ta-pa Mountains, and Taihang Mountains, situated at an elevation below 1500 m. CONCLUSIONS: Four characters, namely leaf curvature, margin taper, papillation on midvein, and edges were put forward as primary indexes for distinguishing Taxus species. The ecotype Qingling type represented an independent evolutionary lineage and formed a unique ecological niche. Therefore, we suggested that the Qingling type should be treated as a novel species and named it Taxus qinlingensis Y. F. Wen & X. T. Wu, sp. nov.

Negative allometry of leaf xylem conduit diameter and double-wall thickness: implications for implosion safety.

Xylem conduits have lignified walls to resist crushing pressures. The thicker the double-wall (T) relative to its diameter (D), the greater the implosion safety. Having safer conduits may incur higher costs and reduced flow, while having less resistant xylem may lead to catastrophic collapse under drought. Although recent studies have shown that conduit implosion commonly occurs in leaves, little is known about how leaf xylem scales T vs D to trade off safety, flow efficiency, mechanical support, and cost. We measured T and D in > 7000 conduits of 122 species to investigate how T vs D scaling varies across clades, habitats, growth forms, leaf, and vein sizes. As conduits become wider, their double-cell walls become proportionally thinner, resulting in a negative allometry between T and D. That is, narrower conduits, which are usually subjected to more negative pressures, are proportionally safer than wider ones. Higher implosion safety (i.e. higher T/D ratios) was found in asterids, arid habitats, shrubs, small leaves, and minor veins. Despite the strong allometry, implosion safety does not clearly trade off with other measured leaf functions, suggesting that implosion safety at whole-leaf level cannot be easily predicted solely by individual conduits' anatomy.

Reduced mesophyll conductance under chronic O3 exposure in poplar reflects thicker cell walls and increased subcellular diffusion pathway lengths according to the anatomical model.

Ozone (O3) is one of the most harmful and widespread air pollutants, affecting crop yield and plant health worldwide. There is evidence that O3 reduces the major limiting factor of photosynthesis, namely CO2 mesophyll conductance (gm), but there is little quantitative information of O3-caused changes in key leaf anatomical traits and their impact on gm. We exposed two O3-responsive clones of the economically important tree species Populus × canadensis Moench to 120 ppb O3 for 21 days. An anatomical diffusion model within the leaf was used to analyse the entire CO2 diffusion pathway from substomatal cavities to carboxylation sites and determine the importance of each structural and subcellular component as a limiting factor. gm decreased substantially under O3 and was found to be the most important limitation of photosynthesis. This decrease was mostly driven by an increased cell wall thickness and length of subcellular diffusion pathway caused by altered interchloroplast spacing and chloroplast positioning. By contrast, the prominent leaf integrative trait leaf dry mass per area was neither affected nor related to gm under O3. The observed relationship between gm and anatomy, however, was clone-dependent, suggesting that mechanisms regulating gm may differ considerably between closely related plant lines. Our results confirm the need for further studies on factors constraining gm under stress conditions.

Drought-adapted leaves are produced even when more water is available in dry tropical forest.

Species in dry environments may adjust their anatomical and physiological behaviors by adopting safer or more efficient strategies. Thus, species distributed across a water availability gradient may possess different phenotypes depending on the specific environmental conditions to which they are subjected. Leaf and vascular tissues are plastic and may vary strongly in response to environmental changes affecting an individual's survival and species distribution. To identify whether and how legumes leaves vary across a water availability gradient in a seasonally dry tropical forest, we quantified leaf construction costs and performed an anatomical study on the leaves of seven legume species. We evaluated seven species, which were divided into three categories of rainfall preference: wet species, which are more abundant in wetter areas; indifferent species, which are more abundant and occur indistinctly under both rainfall conditions; and dry species, which are more abundant in dryer areas. We observed two different patterns based on rainfall preference categories. Contrary to our expectations, wet and indifferent species changed traits in the sense of security when occupying lower rainfall areas, whereas dry species changed some traits when more water was available, such as increasing cuticle and spongy parenchyma thickness, or producing smaller and more numerous stomata. Trischidium molle, the most plastic and wet species, exhibited a similar strategy to the dry species. Our results corroborate the risks to vegetation under future climate change scenarios as stressed species and populations may not endure even more severe conditions.

Genomic regions associate with major axes of variation driven by gas exchange and leaf construction traits in cultivated sunflower (Helianthus annuus L.).

Stomata and leaf veins play an essential role in transpiration and the movement of water throughout leaves. These traits are thus thought to play a key role in the adaptation of plants to drought and a better understanding of the genetic basis of their variation and coordination could inform efforts to improve drought tolerance. Here, we explore patterns of variation and covariation in leaf anatomical traits and analyze their genetic architecture via genome-wide association (GWA) analyses in cultivated sunflower (Helianthus annuus L.). Traits related to stomatal density and morphology as well as lower-order veins were manually measured from digital images while the density of minor veins was estimated using a novel deep learning approach. Leaf, stomatal, and vein traits exhibited numerous significant correlations that generally followed expectations based on functional relationships. Correlated suites of traits could further be separated along three major principal component (PC) axes that were heavily influenced by variation in traits related to gas exchange, leaf hydraulics, and leaf construction. While there was limited evidence of colocalization when individual traits were subjected to GWA analyses, major multivariate PC axes that were most strongly influenced by several traits related to gas exchange or leaf construction did exhibit significant genomic associations. These results provide insight into the genetic basis of leaf trait covariation and showcase potential targets for future efforts aimed at modifying leaf anatomical traits in sunflower.

Leaf anatomical alterations reduce cotton's mesophyll conductance under dynamic drought stress conditions.

Drought stress significantly affects cotton's net photosynthetic rate (A) by restraining stomatal (gs ) and mesophyll conductance (gm ) as well as perturbing its biochemical process, resulting in yield reductions. Despite the significant progress in dissecting effects of drought on photosynthesis, the variability observed in cotton's gm , and the mechanisms contributing to that variability under dynamic drought stress conditions are poorly understood. For that reason, a controlled-environment experiment with two cotton genotypes (Dexiamian 1, Yuzaomian 9110), three water levels (soil relative water content: control [75 ± 5]%, moderate drought [60 ± 5]%, severe drought [45 ± 5]%), and two drought durations (10 and 31 days) were conducted. The results indicated that the cotton boll biomass was significantly decreased under 10-day severe drought and 31-day moderate and severe drought. Decreases in gs were later accompanied by decreases in gm and further combined with reductions in electron transport rate, as drought stress progressed in duration and severity, ultimately resulting in significant reductions in A of subtending leaf. Stomatal and mesophyll conductance constraints were the primary factors limiting photosynthesis, while biochemical constraints decreased, as drought stress progressed. Considering gm , its decline was ascribed to increases in the diffusion resistance of CO2 through cytoplasm (rcyt ), under short- or long-term drought, as well as to increases in leaf dry mass (LMA), and decreases in the chloroplast surface area exposed to intercellular air space (Sc /S), under long-term drought. It was concluded that A could be enhanced, under dynamic drought stress conditions, by increasing gm through increasing Sc /S and reducing LMA and rcyt .

Integrating ATAC-seq and RNA-seq to identify differentially expressed genes with chromatin-accessible changes during photosynthetic establishment in Populus leaves.

Leaves are the primary photosynthetic organs, providing essential substances for tree growth. It is important to obtain an anatomical understanding and regulatory network analysis of leaf development. Here, we studied leaf development in Populus Nanlin895 along a development gradient from the newly emerged leaf from the shoot apex to the sixth leaf (L1 to L6) using anatomical observations and RNA-seq analysis. It indicated that mesophyll cells possess obvious vascular, palisade, and spongy tissue with distinct intercellular spaces after L3. Additionally, vacuoles fuse while epidermal cells expand to form pavement cells. RNA-seq analysis indicated that genes highly expressed in L1 and L2 were related to cell division and differentiation, while those highly expressed in L3 were enriched in photosynthesis. Therefore, we selected L1 and L3 to integrate ATAC-seq and RNA-seq and identified 735 differentially expressed genes (DEGs) with changes in chromatin accessibility regions within their promoters, of which 87 were transcription factors (TFs), such as ABI3VP1, AP-EREBP, MYB, NAC, and GRF. Motif enrichment analysis revealed potential regulatory functions for the DEGs through upstream TFs including TCP, bZIP, HD-ZIP, Dof, BBR-BPC, and MYB. Overall, our research provides a potential molecular foundation for regulatory network exploration in leaf development during photosynthesis establishment.

Optimal protocol for in vitro polyploid induction of Cymbidium aloifolium (L.) Sw.

BACKGROUND: Cymbidium aloifolium is a popular ornamental flower in Thailand with both economic and medical values. Polyploid induction techniques are used to improve plant quality. This study identified polyploidy levels of C. aloifolium induction by colchicine. Protocorms of C. aloifolium were treated on solid New Dogashima Medium (NDM) with various concentrations of colchicine (0, 0.01, 0.02, 0.03, 0.04 and 0.05% w/v) for 2, 4 and 8 weeks. RESULTS: Colchicine effectively induced plant polyploidy. Tetraploid plants were found after treatment with 0.03% and 0.04% colchicine for 8 weeks, while at increased concentration and duration, survival, response and growth performance decreased. Tetraploid plants showed the lowest growth performance but highest size of stomatal and epidermal cells. Growth performance and leaf surface anatomy data were analyzed by Pearson's correlation and PCA. Results showed that stomatal and epidermal cell sizes had strongly negative correlations with other variables, while HCA revealed that stomatal and epidermal cell sizes of tetraploid plantlets were larger but stomatal and epidermal cell densities decreased when compared with the diploids. CONCLUSION: Colchicine at suitable concentrations and duration produced polyploid plants with alteration of morphological and anatomical traits. This study provides potential information to support orchid quality production as ornamental plants and a source of pharmaceutical raw materials.

Distinctive foliar features and volatile profiles in three Ambrosia species (Asteraceae).

MAIN CONCLUSION: Ambrosia species differ both in their trichome types and in metabolic profiles of leaf volatiles. The current study provides tools for easier taxonomic identification of ragweed species. The genus Ambrosia (Asteraceae) includes some of the most noxious allergenic invasive weeds in the world. Due to high polymorphism in this genus, identification of species is often difficult. This study focuses on microscopic investigation of foliar features and GC-MS identification of the main leaf volatile components of three Ambrosia species currently found in Israel-invasive species Ambrosia confertiflora and A. tenuifolia, and transient A. grayi. A. confertiflora and A. tenuifolia have three trichome types: non-glandular trichomes, capitate glandular trichomes and linear glandular trichomes. Their non-glandular trichomes and capitate trichomes have distinct structures and can serve as taxonomic characters. A. grayi (the least successful invader) has only very dense covering trichomes. All three Ambrosia species have secretory structures in their leaf midrib. A. confertiflora, the most problematic invasive plant in Israel, had a ten times higher volatiles content than the other two species. In A. confertiflora, the most abundant volatiles were chrysanthenone (25.5%), borneol (18%), germacrene D and (E)-caryophyllene (both around 12%). In A. tenuifolia, the most abundant volatiles were ß-myrcene (32.9%), (2E)-hexenal (13%) and 1,8-cineole (11.7%). In A. grayi, the most abundant volatiles were ß-myrcene (17.9%), germacrene D (17.8%) and limonene (14%). The three examined species have distinct trichome types and metabolic profiles. Non-glandular trichomes show structural diversification between species and are a good descriptive character. Considering the anthropocentric significance of this highly problematic genus, the current study provides tools for easier identification of ragweed species.

Unpredicted, rapid and unintended structural and functional changes occurred during early domestication of Silphium integrifolium, a perennial oilseed.

MAIN CONCLUSION: Selection for increased yield changed structure, physiology and overall resource-use strategy from conservative towards acquisitive leaves. Alternative criteria can be considered, to increase yield with less potentially negative traits. We compared the morphology, anatomy and physiology of wild and semi-domesticated (SD) accessions of Silphium integrifolium (Asteraceae), in multi-year experiments. We hypothesized that several cycles of selection for seed-yield would result in acquisitive leaves, including changes predicted by the leaf economic spectrum. Early-selection indirectly resulted in leaf structural and functional changes. Leaf anatomy changed, increasing mesophyll conductance and the size of xylem vessels and mesophyll cells increased. Leaves of SD plants were larger, heavier, with lower stomatal conductance, lower internal CO2 concentration, and lower resin concentration than those of wild types. Despite increased water use efficiency, SD plants transpired 25% more because their increase in leaf area. Unintended and undesired changes in functional plant traits could quickly become fixed during domestication, shortening the lifespan and increasing resource consumption of the crop as well as having consequences in the provision and regulation of ecosystem services.

The role of chloroplast movement in C4 photosynthesis: a theoretical analysis using a three-dimensional reaction-diffusion model for maize.

Chloroplasts movement within mesophyll cells in C4 plants is hypothesized to enhance the CO2 concentrating mechanism, but this is difficult to verify experimentally. A three-dimensional (3D) leaf model can help analyse how chloroplast movement influences the operation of the CO2 concentrating mechanism. The first volumetric reaction-diffusion model of C4 photosynthesis that incorporates detailed 3D leaf anatomy, light propagation, ATP and NADPH production, and CO2, O2 and bicarbonate concentration driven by diffusional and assimilation/emission processes was developed. It was implemented for maize leaves to simulate various chloroplast movement scenarios within mesophyll cells: the movement of all mesophyll chloroplasts towards bundle sheath cells (aggregative movement) and movement of only those of interveinal mesophyll cells towards bundle sheath cells (avoidance movement). Light absorbed by bundle sheath chloroplasts relative to mesophyll chloroplasts increased in both cases. Avoidance movement decreased light absorption by mesophyll chloroplasts considerably. Consequently, total ATP and NADPH production and net photosynthetic rate increased for aggregative movement and decreased for avoidance movement compared with the default case of no chloroplast movement at high light intensities. Leakiness increased in both chloroplast movement scenarios due to the imbalance in energy production and demand in mesophyll and bundle sheath cells. These results suggest the need to design strategies for coordinated increases in electron transport and Rubisco activities for an efficient CO2 concentrating mechanism at very high light intensities.

Variations in leaf anatomical characteristics drive the decrease of mesophyll conductance in poplar under elevated ozone.

Decline in mesophyll conductance (gm ) plays a key role in limiting photosynthesis in plants exposed to elevated ozone (O3 ). Leaf anatomical traits are known to influence gm , but the potential effects of O3 -induced changes in leaf anatomy on gm have not yet been clarified. Here, two poplar clones were exposed to elevated O3 . The effects of O3 on the photosynthetic capacity and anatomical characteristics were assessed to investigate the leaf anatomical properties that potentially affect gm . We also conducted global meta-analysis to explore the general response patterns of gm and leaf anatomy to O3 exposure. We found that the O3 -induced reduction in gm was critical in limiting leaf photosynthesis. Changes in liquid-phase conductance rather than gas-phase conductance drive the decline in gm under elevated O3, and this effect was associated with thicker cell walls and smaller chloroplast sizes. The effects of O3 on palisade and spongy mesophyll cell traits and their contributions to gm were highly genotype-dependent. Our results suggest that, while anatomical adjustments under elevated O3 may contribute to defense against O3 stress, they also cause declines in gm and photosynthesis. These results provide the first evidence of anatomical constraints on gm under elevated O3 .

Anatomical determinants of gas exchange and hydraulics vary with leaf shape in soybean.

BACKGROUND AND AIMS: Leaf shape in crops can impact light distribution and carbon capture at the whole plant and canopy level. Given similar leaf inclination, narrow leaves can allow a greater fraction of incident light to pass through to lower canopy leaves by reducing leaf area index, which can potentially increase canopy-scale photosynthesis. Soybean has natural variation in leaf shape which can be utilized to optimize canopy architecture. However, the anatomical and physiological differences underlying variation in leaf shape remain largely unexplored. METHODS: In this study, we selected 28 diverse soybean lines with leaf length to width ratios (leaf ratio) ranging between 1.1 and 3.2. We made leaf cross-sectional, gas exchange, vein density and hydraulic measurements and studied their interrelationships among these lines. KEY RESULTS: Our study shows that narrow leaves tend to be thicker, with an ~30 µm increase in leaf thickness for every unit increase in leaf ratio. Interestingly, thicker leaves had a greater proportion of spongy mesophyll while the proportions of palisade and paraveinal mesophyll decreased. In addition, narrow and thicker leaves had greater photosynthesis and stomatal conductance per unit area along with greater leaf hydraulic conductance. CONCLUSIONS: Our results suggest that selecting for narrow leaves can improve photosynthetic performance and potentially provide a yield advantage in soybean.

Leaf vein density correlates with crassulacean acid metabolism, but not hydraulic capacitance, in the genus Clusia.

BACKGROUND AND AIMS: Many succulent species are characterized by the presence of Crassulacean acid metabolism (CAM) and/or elevated bulk hydraulic capacitance (CFT). Both CAM and elevated CFT substantially reduce the rate at which water moves through transpiring leaves. However, little is known about how these physiological adaptations are coordinated with leaf vascular architecture. METHODS: The genus Clusia contains species spanning the entire C3-CAM continuum, and also is known to have >5-fold interspecific variation in CFT. We used this highly diverse genus to explore how interspecific variation in leaf vein density is coordinated with CAM and CFT. KEY RESULTS: We found that constitutive CAM phenotypes were associated with lower vein length per leaf area (VLA) and vein termini density (VTD), compared to C3 or facultative CAM species. However, when vein densities were standardized by leaf thickness, this value was higher in CAM than C3 species, which is probably an adaptation to overcome apoplastic hydraulic resistance in deep chlorenchyma tissue. In contrast, CFT did not correlate with any xylem anatomical trait measured, suggesting CAM has a greater impact on leaf transpiration rates than CFT. CONCLUSIONS: Our findings strongly suggest that CAM photosynthesis is coordinated with leaf vein densities. The link between CAM and vascular anatomy will be important to consider when attempting to bioengineer CAM into C3 crops.

Light intensity mediates phenotypic plasticity and leaf trait regionalization in a tank bromeliad.

BACKGROUND AND AIMS: Phenotypic plasticity allows plants to cope with environmental variability. Plastic responses to the environment have mostly been investigated at the level of individuals (plants) but can also occur within leaves. Yet the latter have been underexplored, as leaves are often treated as functional units with no spatial structure. We investigated the effect of a strong light gradient on plant and leaf traits and examined whether different portions of a leaf show similar or differential responses to light intensity. METHODS: We measured variation in 27 morpho-anatomical and physiological traits of the rosette and leaf portions (i.e. base and apex) of the tank bromeliad Aechmea aquilega (Bromeliaceae) when naturally exposed to a marked gradient of light intensity. KEY RESULTS: The light intensity received by A. aquilega had a strong effect on the structural, biochemical and physiological traits of the entire rosette. Plants exposed to high light intensity were smaller and had wider, shorter, more rigid and more vertical leaves. They also had lower photosynthetic performance and nutrient levels. We found significant differences between the apex and basal portions of the leaf under low-light conditions, and the differences declined or disappeared for most of the traits as light intensity increased (i.e. leaf thickness, adaxial trichome density, abaxial and adaxial trichome surface, and vascular bundle surface and density). CONCLUSIONS: Our results reveal a strong phenotypic plasticity in A. aquilega, particularly in the form of a steep functional gradient within the leaf under low-light conditions. Under high-light conditions, trait values were relatively uniform along the leaf. This study sheds interesting new light on the functional complexity of tank bromeliad leaves, and on the effect of environmental conditions on leaf trait regionalization.

Genotypic and Phenotypic Diversity of Endemic Golden Camellias Collected from the North of Vietnam.

Golden Camellias have recently been used as a food, cosmetic, and traditional medicine in China and Vietnam. Forty-two species have natural distribution in Vietnam, of which thirty-two species were considered endemic species of this country. The morphology of leaves and flowers of these species were similar; therefore, their taxonomic identification usually needed experts and the authentication has often been confused among species. Our study aims to describe the genetic diversity and the relationship of six species Camellia phanii, Camellia tamdaoensis, Camellia tienii, Camellia flava, Camellia petelotii and Camellia euphlebia by using three chloroplast DNA-barcodes: matK, rbcL and trnH-psbA. We also clarified the significant differences in anatomical characteristics of midvein and blade of their leaves, which suggested the possibility to use these criteria in taxonomy. In addition, preliminary chemical profiles of the methanolic extracts of leaves from six Golden Camellias such as total phenolic content (TPC), total flavonoid content (TFC), total anthocyanin content (TAC) and chlorogenic acids content (TCGAs) also showed the diversity among them. Interestingly, the discrimination on the catechins profile among six species followed the same tendency with the genetic distance on the phylogeny tree suggesting that catechins (i. e., discriminative catechins) can be biomarkers for the chemotaxonomy of these six Golden Camellias.

Integration of high-throughput phenotyping with anatomical traits of leaves to help understanding lettuce acclimation to a changing environment.

MAIN CONCLUSION: The combination of image-based phenotyping with in-depth anatomical analysis allows for a thorough investigation of plant physiological plasticity in acclimation, which is driven by environmental conditions and mediated by anatomical traits. Understanding the ability of plants to respond to fluctuations in environmental conditions is critical to addressing climate change and unlocking the agricultural potential of crops both indoor and in the field. Recent studies have revealed that the degree of eco-physiological acclimation depends on leaf anatomical traits, which show stress-induced alterations during organogenesis. Indeed, it is still a matter of debate whether plant anatomy is the bottleneck for optimal plant physiology or vice versa. Here, we cultivated 'Salanova' lettuces in a phenotyping chamber under two different vapor pressure deficits (VPDs; low, high) and watering levels (well-watered, low-watered); then, plants underwent short-term changes in VPD. We aimed to combine high-throughput phenotyping with leaf anatomical analysis to evaluate their capability in detecting the early stress signals in lettuces and to highlight the different degrees of plants' eco-physiological acclimation to the change in VPD, as influenced by anatomical traits. The results demonstrate that well-watered plants under low VPD developed a morpho-anatomical structure in terms of mesophyll organization, stomatal and vein density, which more efficiently guided the acclimation to sudden changes in environmental conditions and which was not detected by image-based phenotyping alone. Therefore, we emphasized the need to complement high-throughput phenotyping with anatomical trait analysis to unveil crop acclimation mechanisms and predict possible physiological behaviors after sudden environmental fluctuations due to climate changes.

Structural organization of the spongy mesophyll.

Many plant leaves have two layers of photosynthetic tissue: the palisade and spongy mesophyll. Whereas palisade mesophyll consists of tightly packed columnar cells, the structure of spongy mesophyll is not well characterized and often treated as a random assemblage of irregularly shaped cells. Using micro-computed tomography imaging, topological analysis, and a comparative physiological framework, we examined the structure of the spongy mesophyll in 40 species from 30 genera with laminar leaves and reticulate venation. A spectrum of spongy mesophyll diversity encompassed two dominant phenotypes: first, an ordered, honeycomblike tissue structure that emerged from the spatial coordination of multilobed cells, conforming to the physical principles of Euler's law; and second, a less-ordered, isotropic network of cells. Phenotypic variation was associated with transitions in cell size, cell packing density, mesophyll surface-area-to-volume ratio, vein density, and maximum photosynthetic rate. These results show that simple principles may govern the organization and scaling of the spongy mesophyll in many plants and demonstrate the presence of structural patterns associated with leaf function. This improved understanding of mesophyll anatomy provides new opportunities for spatially explicit analyses of leaf development, physiology, and biomechanics.

Contrasting anatomical and biochemical controls on mesophyll conductance across plant functional types.

Mesophyll conductance (gm ) limits photosynthesis by restricting CO2 diffusion between the substomatal cavities and chloroplasts. Although it is known that gm is determined by both leaf anatomical and biochemical traits, their relative contribution across plant functional types (PFTs) is still unclear. We compiled a dataset of gm measurements and concomitant leaf traits in unstressed plants comprising 563 studies and 617 species from all major PFTs. We investigated to what extent gm limits photosynthesis across PFTs, how gm relates to structural, anatomical, biochemical, and physiological leaf properties, and whether these relationships differ among PFTs. We found that gm imposes a significant limitation to photosynthesis in all C3 PFTs, ranging from 10-30% in most herbaceous annuals to 25-50% in woody evergreens. Anatomical leaf traits explained a significant proportion of the variation in gm (R2 > 0.3) in all PFTs except annual herbs, in which gm is more strongly related to biochemical factors associated with leaf nitrogen and potassium content. Our results underline the need to elucidate mechanisms underlying the global variability of gm . We emphasise the underestimated potential of gm for improving photosynthesis in crops and identify modifications in leaf biochemistry as the most promising pathway for increasing gm in these species.