Sinus membrane thickness of healthy endodontically treated maxillary molars.

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student's t-tests were performed. RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05). CONCLUSION: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.

Nonsurgical management of large periapical lesions: case reports and review of the literature.

The objectives of this article are to report 2 cases of nonsurgical endodontic treatment for the management of periapical lesions associated with large cortical bone perforations and review the literature on the clinical efficacy of nonsurgical endodontic treatment to draw insights from published case reports. Large, cyst-like periapical lesions in 2 patients were successfully treated with combined modalities of root canal treatment, antimicrobial therapy (calcium hydroxide and triple antibiotic paste [TAP]), and mineral trioxide aggregate (MTA) obturation of the canal space. In both cases, instrumentation was extended 1 mm beyond the apical foramen to facilitate drainage through the root canal, because it was assumed that the periapical lesion could be cystic. After instrumentation, TAP was placed within the canal space to aid in disinfection and healing of the dental, pulpal, and periapical conditions. In both patients, the teeth were asymptomatic and functional at follow-up examinations (case 1, 3 years; case 2, 30 months). Supporting the positive outcomes in the 2 clinical cases, the published literature suggests that the use of biocompatible materials such as MTA, which can promote the deposition of hydroxyapatite, has the potential to contribute to tissue regeneration and the healing of large periapical lesions.

Measurement of the apical anatomy of immature maxillary central incisors using cone-beam computed tomography.

OBJECTIVE: To investigate the CBCT findings of the apical anatomy of immature maxillary central incisors. METHODS: CBCT images of 100 immature maxillary central incisors in Nolla 8 and 100 immature maxillary central incisors in Nolla 9 were collected. The mesiodistal and carniocaudal diameters of the apical foramen of immature maxillary central incisors were measured by software included with CBCT, as well as the mesiodistal, carniocaudal and facioligual diameters of the apical shadow. The apical shadow and apical foramen diameters were compared between Nolla 8 and Nolla 9. Data were analyzed using the MedCalc software package. RESULTS: For immature maxillary central incisors, the mesiodistal and facioligual diameters of the apical foramen were 2.75±0.68 mm and 3.28±0.74 mm in Nolla 8 and 1.50±0.51 mm and 1.92±0.79 mm in Nolla 9. The mesiodistal, facioligual and carniocaudal diameters of the apical shadow were 3.84±0.73 mm, 4.49±0.68 mm and 3.41±1.27 mm in Nolla 8 and 2.76±0.60 mm, 3.41±0.80 mm and 2.06±0.65 mm in Nolla 9, respectively. CONCLUSIONS: The immature maxillary central incisors in Nolla 8 have a larger apical shadow and apical foramen than those in Nolla 9. The apical region of the maxillary central incisors in Nolla 8 was more likely to have a broad, blurred lamina dura. With the development of the apical foramen, the lamina dura in the apical region tended to be clear and sharp. CLINICAL SIGNIFICANCE: To our knowledge, this is the first study to radiologically analyse the in vivo anatomy of the apical foramen and apical shadow of immature maxillary central incisors. The results of this study provide a more detailed understanding of the apical anatomy of the immature maxillary central incisor for the diagnosis and treatment of apical lesions.

Evaluating the efficacy of endodontic microsurgery for teeth with an undeveloped root apex and periapical periodontitis after nonsurgical treatment failure.

AIM: To determine the efficacy of endodontic microsurgery for teeth with an undeveloped root apex and periapical periodontitis caused by an abnormal central cusp fracture after failed nonsurgical treatment. METHODOLOGY: Eighty teeth in 78 patients were subjected to endodontic microsurgery. All patients were clinically and radiologically examined 1 year postoperatively. The data were statistically analyzed using SPSS 27.0 software. RESULTS: Of the 80 teeth in 78 patients, periapical lesions had disappeared in 77 teeth at 1-year postoperative follow-up, with a success rate of approximately 96.3% (77/80). The efficacy of endodontic microsurgery was not affected by sex, age, extent of periapical lesions, and presence of the sinus tract. Between-group differences were not statistically significant (P > 0.05). CONCLUSIONS: Endodontic microsurgery can be an effective alternative treatment option for teeth with an undeveloped root apex and periapical periodontitis caused by an abnormal central cusp fracture after nonsurgical treatment failure.

Radiographic and electronic working length comparison. An in vivo study of three Electronic Apex Locator devices.

The aim of this study is to compare the working length measured with Root ZX (EAL1), Propex II (EAL2) and Endo Analyzer Model 8005 (EAL3) with radiographic measurements during endodontic treatment. Fifty single canal teeth scheduled for endodontic treatment were selected for the study. After endodontic access preparation, pulp chamber was irrigated with 5mL of 5% sodium hypochlorite (NaOCl). The canal was scouted with a size 10 K-file introduced slightly over the apex to verify the canal patency. The working length (WL) was measured using all three EAL devices and radiographically. All measured working lengths were recorded and compared using ANOVA for repeated measures considering the multiple comparison of paired data Least Significant Difference (LSD). The WL mean values for EAL1 were 19.1 ± 1.7 mm; for EAL2 were 19.4 ± 1.7; for EAL3 were 19.4 ± 1.6 and for RG were 19.2 ± 1.7. The Pearson correlation coefficients indicated that the following correlation between electronic devices and radiographic WL: EAL1- 0.986, EAL2- 0.953 and EAL3- 0.931. Considering the mean values compared to radiographic measures, Root ZX gave better results than the other tested EAL devices. Endo Analyzer Model 8005 showed the worst performance.

Evaluation of Temperature Increase From Joule Heat in Numerical Tooth Model by Applying 500 kHz Current for Apical Periodontitis Treatment-Effect of Applied Voltage and Tooth Conductivity.

For apical periodontitis treatments, a new method with the insertion of an electrode into the root canal of a tooth and application of a current at 500 kHz to sterilize the area by Joule heat has attracted attention. However, few studies have quantified the temperature increase in the root canal. This study aimed to investigate the basic characteristics of the temperature increase in a simple and standard tooth model when energizing a current at 500 kHz to the numerical tooth model with typical electrical and physical properties. We developed a numerical model of a standard tooth (dentin) and periodontal tissues consisting of an alveolar bone, cortical bone, and gingiva, and physiological saline in a root canal and calculated the temperature increase inside the numerical model by a coupled analysis of current and heat when a voltage was applied across the electrodes. The calculated results for the different applied voltages showed a temperature increase at the apical portion of the root canal, which increased with the applied voltage even for the same total supplied energy. The temperature increase occurred at the apical portion of the root canal as the tooth conductivity decreased. When the tooth conductivity was high, a current passed through the dentin, which led to a decrease in the temperature at the apical portion of the root canal. However, a chemical solution with a higher conductivity in the root canal tended to increase the temperature at the apical portion of the root canal, regardless of the tooth conductivity. More efficient approaches for increasing the spatial and temporal temperature for the tooth model target are needed. © 2021 Bioelectromagnetics Society.

Is canal overinstrumentation able to produce apical root dentinal microcracks in extracted teeth?

AIM: To assess the impact of mechanical overinstrumentation of root canals in extracted teeth on the development of dentinal microcracks in the apical portion of the root by means of micro-computed tomographic (micro-CT) analysis. Root canal preparation short of the canal terminus and at the apical foramen (AF) were used as controls. METHODOLOGY: Twenty 2-rooted maxillary premolars with two canals were selected, scanned in a micro-CT device and the root canals prepared sequentially using Reciproc M-Wire R25 instruments to working lengths: 1 mm short of the AF (AF - 1 mm), at the AF (AF), and overinstrumentation (AF + 1 mm). A micro-CT scan of each specimen was performed after each time point. After reconstruction and co-registration procedures, the images were screened from the cementoenamel junction to the apex (n = 55 352) to identify the presence of dentinal microcracks in the apical third of the root. RESULTS: After the analyses of 55 352 slices, dentinal microcracks were visualized in 12.45% of the images (6892 slices), with 5.73% (3174 slices) in the cervical, 3.57% (1976 slices) in the middle and 3.15% (1740 slices) in the apical third. All dentinal microcracks observed at all time points (AF - 1 mm, AF and AF + 1 mm) were already present in the corresponding images before canal instrumentation. Therefore, no new microcracks were detected, regardless of the working length used for canal instrumentation. CONCLUSION: Reciprocating root canal preparation either short, at or beyond the AF (overinstrumentation) did not create dentinal microcracks in the roots of extracted 2-rooted maxillary premolars.

Location and shape of the apical foramina in posterior teeth: an in-vitro analysis.

PURPOSE: To analyze the morphology of shapes and positions of the apical foramina in permanent maxillary and mandibular posterior teeth. METHODS: Examination of the apical foramina was performed with a stereomicroscope at a magnification of 10×. The anatomic parameters evaluated were the shapes of the peripheral contours of the apical foramina (rounded, oval, asymmetric, and semilunar). The location of the apical foramen was recorded as a center, buccal, lingual, mesial, and distal surface. RESULTS: Results have shown that the frequency of deviation was 68% in all teeth being assessed, while the most frequent location of the apical foramen was in the center, with 32% followed by distal with 18%. The common shape of apical foramina was round shape in all the teeth. CONCLUSIONS: The variation in the location and shapes of apical foramina in teeth. The commonest deviation in location of apical foramina was distal and the frequent shape was of a round shape.

Evaluation of Foraminal Enlargement with Thermally Treated Nickel-Titanium Systems.

AIM AND OBJECTIVE: To evaluate morphologic changes in the main foramen after enlargement with four different systems. MATERIALS AND METHODS: One hundred and twenty canals (buccal of maxillary molars and mesial of mandibular molars) with patency and apical foramen ≤200 µm were included. These apical foramina were photographed and then randomly divided into four experimental groups, according to the ProDesign Logic (PDL), ProDesign R (PDR), twisted file adaptive (TFA), and WaveOne Gold (WOG) systems, all of which were composed of three sequential instruments (Glidepath, #25 and #35). Root canals were prepared 1 mm beyond the main foramen (n = 30). The specimens were photographed again to capture intermediate (#25) and final enlargement (#35) images. These were analyzed using an image software that allowed comparison of the enlarged area and shape of the main foramen. RESULTS: In the Intragroup comparison, the Friedman's test showed a statistical difference between each phase of foramen enlargement (p <0.05). In the intergroup comparison, the percentage of foramen enlargement showed statistically significant difference between Groups PDR and TFA only in the analysis from #25 to #35, with 42.88 and 67.34% of foramen area widening, respectively. Relative to the final foramen shape, 81.7% were observed to be circular, 17.5% oval, and 0.8% flattened. CONCLUSION: Our results showed that foramen enlargement allowed an increase in area, maintained the circular shape of the foramen in the majority of cases, irrespective of the system used, and was a feasible option for use during preparation of the root canal system.

Evaluation of the accuracy of nine electronic apex locators by using Micro-CT.

AIM: To determine the accuracy of locating the apical constriction using apex locators. METHODOLOGY: Extracted teeth were micro-CT scanned preoperatively to localize the apical constriction. Electronic length measurements of 91 root canals were made using nine electronic apex locators (EAL) connected to a mounting model. Distances from the major foramen were recorded at each scale bar of the EALs, and a file was fixed in the canal at a position indicated by each EAL to be the apical constriction. A second micro-CT scan was conducted, and distances from the file tip to constriction and major foramen were calculated for each EAL. The accuracy of EALs was determined with a tolerance of 0.1, 0.25, 0.5 and 1 mm, and the 95% confidence interval was used to compare the EALs. A rank analysis was performed in which measurements beyond the major foramen were considered as inaccurate. RESULTS: Regardless of the type of teeth, there was no significant difference in the accuracy of determining the apical constriction and major foramen between the nine EALs within a tolerance of ±0.5 mm and 1 mm, but there was a significant difference for the tolerances of ±0.1 and 0.25 mm. The highest ranks close to the constriction (98% and 94%) and to the major foramen (86% and 73%) were observed in Dentaport ZX and Elements Diagnostic Unit, respectively. Overestimation of working length beyond the major foramen was observed in all EALs (5% to 71%) when the scale for the major foramen, as recommended by the manufacturers, was used. However, when the scale for the constriction was used, only 3% of the measurements were beyond the major foramen. CONCLUSION: Electronic apex locators were able to determine the apical constriction. Using EALs to determine the major foramen led to overestimation of the working length. Therefore, it may be recommended to use the EAL scale of the constriction.

Comparison of four electronic root canal length measurement devices.

OBJECTIVE: The objective of this study is to evaluate the performance of four electronic root canal length measurement devices (ERCLMDs) [Root ZX, Raypex 6, ProPex II, and VDW Gold with ERCLMD] in wet and dry root canals with different major foramen diameters, in association with three file positions within the final 1 mm of canals. MATERIALS AND METHODS: Fifty roots were divided into five groups that were instrumented apically to the terminus diameter using K-files 15, 20, 30, 40, and 60. ERCLMD measurements were made when the file tip was at major foramen, 0.5 mm and 1.0 mm short of the foramen, when the apex touched to the surface of saline or was immersed 3 mm into saline, and when the canal was dry or was irrigated with saline. The differences between the electronic lengths and the actual lengths were calculated. The data were analyzed using the three-, two-, and one-way ANOVA and the LSD test (p < .05). RESULTS: Overall, the four ERCLMDs demonstrated 12.8% unstable and beyond the foramen measurements (11.3%). About 85% of the beyond the foramen measurements had foramen diameters 0.40 and 0.60. ERCLMD comparisons related to the file positions in the foramen diameters showed significant differences between ERCLMDs in each foramen diameter (p < .05). CONCLUSIONS: All ERCLMDs provided highly accurate measurements within the final 1 mm of the foramen. Wet or dry canals and apex conditions did not adversely affect the accuracy of the ERCLMDs' readings. ProPex II located the file positions in the teeth with different foramen diameters more accurately than the other ERCLMDs.

Enlargement of the apical foramen of mature teeth by instrumentation and apicoectomy. A study of effectiveness and the formation of dentinal cracks.

OBJECTIVE: In the last few years there have been attempts to revascularize mature necrotic teeth instead of performing a standard root canal treatment. Apical foramen enlargement (AFE) would be necessary for regenerative treatments of mature teeth. In the literature, AFE has been made through apicoectomy and instrumentation. However, no standardized methods have been described yet, which may affect the success of the therapy. Our aim was to describe the effectiveness and damage to dental structures of five methods for AFE. METHODS: Two hundred and ten human teeth were assigned to one control group (n = 10) and four treatment groups (n = 50 each): instrumentation was up to file #80 0.5 mm coronal to the apex (I), at apex level (II), 0.5 mm beyond the apex (III) and apicoectomy at 2 and 4 mm from the apex (IV). The apical foramen diameter was measured before and after treatment. The formation of clinically visible fractures (CVF) and microcracks was analysed clinically and with ESEM, respectively. Thirty-two in situ sheep's teeth were also instrumented, to compare damage in in situ and ex vivo teeth. RESULTS: The foramen diameter was augmented by 0.15, 0.47, 0.54 0.06 and 0.32 mm in human teeth of groups I, II, III, apicoectomy at 2 and 4 mm, respectively. CVF were more frequent as the working length was augmented. No statistical differences were found for microcrack formation. In situ teeth showed significantly less damage. CONCLUSIONS: Instrumentation at apex level seems to be the most effective and least harmful technique for AFE, while apicoectomy is not a useful method.

Influence of tooth length on the accuracy of the Root ZX electronic apical foramen locator: an ex vivo study.

OBJECTIVE: Electronic apical foramen locators are now widely used to determine working length. This study was designed to determine whether tooth length influenced the accuracy of the Root ZX device. MATERIALS AND METHODS: Forty extracted maxillary canine teeth with a length range of 27-29 mm were selected. Access cavities were prepared and coronal flaring of canals performed. The teeth were mounted in self-polymerizing acrylic resin to facilitate horizontal sectioning except for the apical 3-4-mm portion of the root and embedded in alginate as the electronic medium. Electronic measurements were taken at the major foramen, 'zero' reading using the Root ZX and compared with the actual root canal length. The teeth were sectioned 3 mm from the coronal reference point to create a second group with shorter length; these reductions in the length continued six times in all to create seven groups of 40 specimens each. The actual and electronic lengths of specimens in each group were measured. Data were analyzed by Pearson's correlation coefficient. RESULTS: Identical measurements between the actual and electronic root canal length from the longest to the shortest groups were 12.5%, 10.0%, 20.0%, 27.5%, 37.5%, 35.0% and 45.0%, respectively. There was a mild negative correlation between the precise measurements of the Root ZX and root canal lengths in the seven groups (r = -0.964, p < 0.001). CONCLUSION: Under the conditions of the study, the Root ZX device was more accurate in shorter teeth compared to longer ones.

Effect of three NiTi files on transportation of the apical foramen.

AIM: To compare landed and nonlanded rotary file overinstrumentation on transportation of the apical foramen in the curved canals of extracted teeth. METHODOLOGY: Severely curved molar root canals (n = 45) were distributed into three equal groups (n = 15) according to angle (mean 54°) and radius of curvature (mean 5 mm). Canals were overinstrumented 0.5 mm beyond the foramen to a size 35 master apical file using landed (ProFile ISO), nonlanded (ProFile Vortex) or nonlanded, reduced shape memory (Vortex Blue) files. Post-instrumentation images of the apical foramen were compared with pre-instrumentation control images for differences in area, circularity and ratio of Feret's diameters. Groups were compared using anova or Kruskal-Wallis tests with significance of P < 0.05. RESULTS: There were no differences between pre-treatment groups in the parameters tested. All groups demonstrated alterations in the geometry of the apical foramen. There were no significant differences between ProFile ISO, ProFile Vortex or Vortex Blue in area, circularity and ratio of Feret's diameters. CONCLUSIONS: Landed, nonlanded and nonlanded reduced shape memory files all produced transportation of the apical foramen when overinstrumented by 0.5 mm in severely curved canals. There was no difference between these file systems with regard to the degree of this effect.

Mental foramen and apical foramen: A dangerous anatomical proximity.

The study evaluated the spatial position of the mental foramen (MF) using 300 cone-beam computed tomography. The spatial position was analyzed with the horizontal location and relative location (distance between apical foramen and MF). The horizontal location was assessed through three positions (positions 1, 2, and 3). The relative location was determined with the x, y, and x coordinates of the root apex of mandibular premolars and the MF. Student's t-test and chi-square were performed. The most common horizontal location (52%) was position 2, which means between the premolars (p < 0.05). The relative location of the MF to the root apex of the second premolar was closer than the first premolar (p < 0.05). The distance between the root tip of the second premolar and the MF was 5.27 mm, with a minimum value of 1.87 mm. Clinicians should be aware of the possible neural results to the mental nerve of an endodontic infection and the extrusion of irrigation solutions.

Accuracy of an Electronic Apex Locator (EAL) in Measuring the Working Length of Root Canals in Comparison With Radiographs: An In Vivo Study.

INTRODUCTION: Traditionally, radiographs were used to assess the working length of root canals. However, the use of Electronic Apex Locators (EAL) may be a non-invasive alternative. This study aimed to evaluate the accuracy of the electronic apex locator (EAL) compared to radiographic measurements in determining the working length of root canals. METHOD: The study assessed the performance of EALs in different scenarios, including the presence of blood and pulp tissue, the use of ethylenediaminetetraacetic acid (EDTA), sodium hypochlorite (NaOCl) as an irrigant, and post-instrumentation with normal saline. An electronic apex locator (DTE DPEX-V; Woodpecker, China) was used alongside traditional radiographs to measure the working length in 144 root canal treatments. Bland-Altman analysis was used to compare the measurements between EAL and radiographs using Jamovi software, v2.4.8 (https://www.jamovi.org/). RESULT: The findings revealed strong correlations between EAL and radiographic measurements across all testing environments, with Pearson's correlation coefficients ranging from 0.944 to 0.998. The Bland-Altman analysis suggests bias; the average difference was negative and close to zero (Pulp: -0.354, EDTA: -0.0972, NaOCl: -0.0382, Saline: -0.0139) when EAL measurements were compared to radiographic measurements. CONCLUSION: The working length measurement of root canals using an electronic apex locator such as DTE DPEX-V is comparable to traditional radiographic measurements. The use of irrigants improves the measurement. The EAL has the potential to be an alternative to the invasive radiograph for root canal length measurement.

An Ex-Vivo Study Comparing the Accuracy of the E-Connect S+ and Morita Tri Auto ZX2+ Endodontic Handpieces in Root Canal Length Determination.

INTRODUCTION: This ex vivo study evaluated the accuracy of the Electronic Apex Locator (EAL) and Automatic Apical Stop (AAS) functions of the E-Connect S+ and Morita Tri Auto ZX2+ cordless apex locators in determining patency length. METHODS: Sixty-four human teeth with a single root were randomly allocated into E-connect or Morita groups (n = 32). The canals were accessed and preflared, after which a size 15 K-file was inserted into the canal to the major foramen and recorded as the actual length (AL). Matched measurements were taken using the AAS and EAL functions and visually confirmed with confocal microscopy. The variance between canal length (mm), the persons correlation (ρ) between function and AL, and the accuracy (%) of the canal length relative to the AL (Δmm) between devices and functions were assessed. RESULTS: Regardless of device or function, all measurements were within 1±Δmm and correlated strongly (ρ > 0.97) with the AL. When considering a more stringent clinically acceptable range of 0.5±Δmm from the AL, all devices and functions demonstrated similar accuracy levels (84%-94%). However, at lower tolerance ranges, the E-connect device with the EAL function exhibited the highest accuracy. On average, all devices and functions stopped short of the AL (mean Δmm>0). CONCLUSION: The E-Connect S+ and Morita Tri Auto ZX2+ apex locators provided reliable accuracy in determining the position of the major foramen. These findings demonstrate a high level of reproducibility in canal length measurements using both cordless endodontic handpieces, regardless of whether the EAL or AAS functions were employed.

The difference distance between the apical foramen and the anatomical apex in primary teeth-An in vitro study.

INTRODUCTION: The apex area in the primary teeth changes continuously due to the physiologic resorption, therefore; the apical foramen (AF) may not correspond to the anatomic apex (AA), which gives a big challenge to achieve successful endodontic treatment. The aim of this research was to study the difference distance (DD) between the position of the AA and AF, besides the difference acceptance (DA) in primary teeth, and the effect of the following variables: root canal curvature, resorption degree, and canal size on DD and DA separately. METHODS: In this research, 180 root canals from 60 primary teeth were studied. Two lengths of each canal were measured by a K-file from a certain point in the crown; the first length was until the AA and the second was until the AF. Then DD was obtained by calculating the difference between those two lengths. Statistical analysis tests were done. A p value of <.05 was considered significant at a 95% confidence level. RESULTS: The percentage of canals with 0 mm DD was 34.4%, while it was 1.1% with DD of 6 mm. The percentages of acceptable ( ≤ 2 mm) and unacceptable ( > 2 mm) difference were 84.4% and 15.6%, respectively. There was a significant difference in the DD value between the three groups of curvature degree and the three groups of canal size. There was a significant difference between the DA in the three groups of canal size. CONCLUSION: DD has a wide variation value in primary teeth regardless of the degree of root resorption, which has not affected this value or the accepted difference; however, DD and acceptable difference values are somehow affected by the degree of root curvature and canal size. We recommend adding acceptable difference as a criterion when considering pulpectomy treatment in primary teeth.

Clinical Accuracy and Precision of 3 Multifrequency Electronic Apex Locators Assessed through Micro-Computed Tomographic Imaging.

INTRODUCTION: This study aimed to compare the in vivo accuracy and precision of 3 electronic apex locators (EALs) in determining the position of the major foramen using micro-computed tomographic (micro-CT) technology. METHODS: After access preparation of 23 necrotic or vital teeth from 5 patients, canals were negotiated, and hand files were used to determine the position of the foramen with 3 EALs: Propex Pixi (Dentsply Maillefer, Ballaigues, Switzerland), Woodpex III (Woodpecker Medical Instrument Co, Guilin, China), and Root ZX II (J Morita, Tokyo, Japan). After fixing the silicon stop to the file, teeth were extracted and scanned in a micro-CT device with and without the instrument inserted into the canal. Data sets were coregistered, and the accuracy and precision of the EALs were determined at a tolerance level of ±0.5 mm by measuring the distance from the tip of the instruments to a tangential line crossing the margins of the foramen. Statistical comparisons were performed using Friedman with post hoc related samples sign and Spearman tests (α = 5%). RESULTS: A significant difference was detected comparing the accuracy of Root ZX II (100%), Woodpex III (86.96%), and Propex Pixi (52.17%) (P < .05). There was a lack of significance in the relationship between the pulp status and the accuracy of the tested EALs (P > .05). Propex Pixi was significantly less precise than Root ZX II (P < .05), whereas no difference was found between Woodpex III and Root ZX II or Propex Pixi (P > .05). CONCLUSIONS: EALs presented similar precision, but Woodpex III and Root ZX II showed better accuracy to determine the position of the apical major foramen than Propex Pixi.

Comparative evaluation of working length determined using integrated apex locator and root ZX mini under various irrigating solutions: An in vivo study.

Background: Electronic apex locators (EALs) are frequently used as adjuvant to radiographs in working length (WL) determination. The introduction of integrated apex locators (IALs) further simplified the root canal treatment by continuous monitoring of the apex while root canal shaping. Aim: The aim of this study was to evaluate the efficacy of radiographs, EAL, and IAL in determining the WL in the presence of various irrigants. Materials and Methods: The present in vivo study was carried out on 30 patients who were divided into 10 in each group, based on the type of irrigant used; 0.9% saline (Group 1), 0.2% chlorhexidine (Group 2), and 2.5% of sodium hypochlorite (NaOCL) (Group 3). In each group, WL is determined using conventional radiographs, Root ZX Mini (EAL), and CanalPro CL2i (IAL). Statistical Analysis: Kruskal-Wallis test and Friedman's two-way ANOVA test were used for statistical analysis. Results: Mean WL was comparably lower with Root ZX Mini, while the WL by CanalPro CL2i and the radiographic method were comparable. In all methods, the type of solutions used did not influence the WL, with a higher mean WL when NaOCL is used as an irrigant. Nevertheless, the above comparisons were not statistically significant. Conclusion: the irrigation solutions employed in this study had no impact on the performance of apex locators and radiographs.