Switchable Deep Eutectic Solvents for Sustainable Sulfonamide Synthesis.

A sustainable and scalable protocol for synthesizing variously functionalized sulfonamides, from amines and sulfonyl chlorides, has been developed using environmentally responsible and reusable choline chloride (ChCl)-based deep eutectic solvents (DESs). In ChCl/glycerol (1:2 mol mol-1) and ChCl/urea (1:2 mol mol-1), these reactions yield up to 97% under aerobic conditions at ambient temperature within 2-12 h. The practicality of the method is exemplified by the sustainable synthesis of an FFA4 agonist and a key building block en route to anti-Alzheimer drug BMS-299897. A subtle interplay of electronic effects and the solubility characteristics of the starting materials in the aforementioned DESs seem to be responsible for driving the reaction successfully over the hydrolysis of sulfonyl chlorides. The procedure's eco-friendliness is validated  by quantitative metrics like the E-factor and the EcoScale, with products isolated by extraction or filtration after decantation.

Nickel-Catalyzed Enantioselective Carbonyl Addition of Aryl Chlorides and Bromides to Aldehydes.

The Ni-catalyzed enantioselective addition reaction of aryl halides to aldehydes was studied with cyanobis(oxazoline) as chiral ligands and Mn as reductant. Aryl and heteroaryl bromides reacted with phenyl aldehyde at room temperature to produce dibenzyl alcohols in 16-99 % yields with 53-92 % ees. Moreover, the coupling of phenyl chloride with a variety of aryl, heteroaryl and alkyl aldehydes was demonstrated in the presence of cyanobis(oxazoline)/Ni(II) at 60 °C in generally high yields with moderate enantioselectivities.

Volatile anesthetic isoflurane exposure facilitates Enterococcus biofilm infection.

Enterococcus faecalis (E. faecalis) is one of the major pathogenic bacteria responsible for surgical site infections. Biofilm infections are major hospital-acquired infections. Previous studies suggested that ions could regulate biofilm formation in microbes. Volatile anesthetics, frequently administered in surgical setting, target ion channels. Here, we investigated the role of ion channels/transporters and volatile anesthetics in the biofilm formation by E. faecalis MMH594 strain and its ion transporter mutants. We found that a chloride transporter mutant significantly reduced biofilm formation compared to the parental strain. Downregulation of teichoic acid biosynthesis in the chloride transporter mutant impaired biofilm matrix formation and cellular adhesion, leading to mitigated biofilm formation. Among anesthetics, isoflurane exposure enhanced biofilm formation in vitro and in vivo. The upregulation of de novo purine biosynthesis pathway by isoflurane exposure potentially enhanced biofilm formation, an essential process for DNA, RNA, and ATP synthesis. We also demonstrated that isoflurane exposure to E. faecalis increased cyclic-di-AMP and extracellular DNA production, consistent with the increased purine biosynthesis. We further showed that isoflurane enhanced the enzymatic activity of phosphoribosyl pyrophosphate synthetase (PRPP-S). With the hypothesis that isoflurane directly bound to PRPP-S, we predicted isoflurane binding site on it using rigid docking. Our study provides a better understanding of the underlying mechanisms of E. faecalis biofilm formation and highlights the potential impact of an ion transporter and volatile anesthetic on this process. These findings may lead to the development of novel strategies for preventing E. faecalis biofilm formation and improving patient outcomes in clinical settings.

Developing a Passive Dosing Method for Acute Aquatic Toxicity Tests of Cationic Surfactant Benzalkoniums (BACs).

Benzalkonium chlorides (BACs) have been of environmental concern due to their widespread use and potential harm. However, challenges arise in defining and controlling the exposure concentration (Cw) in aquatic toxicity tests involving BACs with a long alkyl chain (i.e., #C > 14). To address this, a novel passive dosing method was introduced in the 48 h-acute ecotoxicity test on Daphnia magna and compared to the conventional solvent-spiking method in terms of Cw stability and toxicity results. Among 13 sorbent materials tested for their sorption capacity, poly(ether sulfone) (PES) membrane was an optimal passive dosing reservoir, with equilibrium desorption of BACs to water achieved within 24 h. The Cw of BACs remained constant in both applied dosing methods during the test period. However, the Cw in solvent-spiking tests was lower than the nominal concentration for long-chain BACs, particularly at low exposure concentrations. Notably, the solvent-spiking tests indicated that the toxicity of BACs increased with alkyl chain length from C6 to 14, followed by a decline in toxicity from C14 to 18. In contrast, the passive dosing method displayed similar or slightly increasing toxicity levels of BACs from C14 to C18, indicating higher toxicity of C16 and C18-BACs than that inferred by the solvent spiking test. These findings emphasize the potential of applying this innovative passive dosing approach in aquatic toxicity tests to generate reliable and accurate toxicity data and support a comprehensive risk assessment of cationic surfactants.

Evaluation of Pyrazolyl-Indolizine Derivatives as Antimicrobial Agents: Synthesis, In vitro, In silico ADMET and Molecular Docking Studies.

Herein, we report analogues of s-indacene by the synthesis of novel indolizine derivatives. Using chloroform as an appropriate solvent, sixteen derivatives of pyrazolyl-indolizine (4--19) were prepared by the reaction of 3-(dimethylamino)-1-(1H-pyrrol-2-yl)prop-2-en-1-one (1) with hydrazonoyl chloride derivatives (2) in the presence of triethylamine in good to excellent yields. We used NMR spectra, IR, mass spectrometry, as well as elemental analyses to prove the chemical structures and the purity of the synthesized compounds 4-19. Among all tested compounds 5, 9, 13 and 19 had a potent antimicrobial efficiency against Bacillus subtilis, Staphylococcus aureus, Pseudomonas aerginousea, Sallmonella typhemerium, and Candida albicans. Furthermore, a significant increase in lipid peroxidation (LPO) toward the Gram-negative bacteria, Pseudomonas aeruginosa when treated with compound 9 was observed, while compound 13 remarkably increased the cell membrane oxidation of Salmonella typhimurium. Additionally, we utilized docking studies and in silico methods to evaluate the drug-likeness, physicochemical properties, and ADMET profiles of the compounds. The results of the molecular docking simulation revealed that the synthesized compounds displayed decreased binding energy when interacting with the active sites of important enzymes, including Sterol 14-demethylase of C. albicans, Dihydropteroate synthase of S. aureus, LasR of P. aeruginosa, Glucosamine-6-phosphate synthase of S. typhimurium, and Gyrase B of B. subtilis.

An Unexpected Synthesis of 2-Sulfonylquinolines via Deoxygenative C2-Sulfonylation of Quinoline N-Oxides with Sulfonyl Chlorides.

A mild, efficient and practical protocol for the preparation of 2-sulfonylquinolines through CS2/Et2NH-induced deoxygenative C2-H sulfonylation of quinoline N-oxides with readily available RSO2Cl was developed. The reaction proceeded well under transition-metal-free conditions and exhibited a wide substrate scope and functional group tolerance. The preliminary studies suggested that the nucleophilic sulfonyl sources were generated in situ via the reaction of CS2, Et2NH and sulfonyl chlorides.

Cobalt-Catalyzed Electroreductive Alkylation of Unactivated Alkyl Chlorides with Conjugated Olefins.

Reactions of unactivated alkyl chlorides under mild and sustainable conditions are rare compared to those of alkyl bromides or iodides. As a result, synthetic methods capable of modifying the vast chemical space of chloroalkane reagents, wastes, and materials are limited. We report the cobalt-catalyzed reductive addition of unactivated alkyl chlorides to conjugated alkenes. Co-catalyzed activation of alkyl chlorides is performed under electroreductive conditions, and the resulting reactions constitute formal alkyl-alkyl bond formation. In addition to developing an operationally simple methodology, detailed mechanistic studies provide insights into the elementary steps of a proposed catalytic cycle. In particular, we propose a switch in the mechanism of C-Cl bond activation from nucleophilic substitution to halogen atom abstraction, which is critical for efficiently generating alkyl radicals. These mechanistic insights were leveraged in designing ligands that enable couplings of primary, secondary, and tertiary alkyl chlorides.

Photocatalytic Synthesis of ß-Keto Primary Chlorides by Selective Chlorocarbonylation of Olefins.

Functionalized primary alkyl chlorides are precursors to a plethora of scaffolds but their access from chemical feedstocks remains challenging. Herein, we report a concise dual Ni/photoredox catalytic protocol for regioselective chlorocarbonylation of unactivated alkenes that enables rapid access to ß-keto primary chlorides. The catalytic process features an extensive substrate scope, scalability and functional group tolerance. The Ni/photocatalytic Cl⋅ generation and subsequent cross-coupling is implicated for the process based on the control experiments and DFT study. The synthetic utility of the protocol has been further corroborated through functionalization of complex substrates and modifications of the product.

Breaking Boundaries: Giant Ultraviolet Birefringence in Dimension-Reduced Zn-Based Crystals.

Birefringent crystals have essential applications in optical communication areas. Low-dimensional structures with inherited structural anisotropy are potential systems for investigating birefringent materials with large birefringence. In this work, the zero-dimensional (0D) [(o-C5H5NO)2ZnCl2] (1) and [o-C5H6NO]2[ZnCl4] (2) were obtained by introducing the π-conjugated o-C5H5NO (4HP) into the three-dimensional (3D) ZnCl2. Remarkably, 1 exhibits a giant birefringence of 0.482@546 nm, which is the largest among Zn-based ultraviolet (UV) compounds and 160 times that of ZnCl2. According to structural and theoretical calculation analyses, the large optical polarizability, high spatial density, ideal distribution of the [(4HP)2ZnCl2]0 cluster, and the low dimension of 1 result in the dramatically increased birefringence compared to ZnCl2. This work will provide a valid route for accelerating the design and synthesis of compounds with excellent birefringence in low-dimensional systems.

Coupling of Aryl Chlorides with Lithium Nucleophiles Enabled by Molecularly Defined Alkynyllithium Palladium Catalysts.

Palladium-catalyzed cross-couplings of aryl chlorides usually call for bulky, electron-rich ligands such as phosphines or heterocyclic carbenes. We have now found that similarly powerful cross-coupling catalysts are obtained by the reaction of palladium salts with alkynyllithium reagents. The species initially formed in this process was characterized as a dilithium tetraalkinyl palladate complex. It catalyzes the coupling of aryl chlorides with the lithium salts of various terminal alkynes to give alkynyl arenes. The isolated Li-alkynyl-Pd complex also efficiently promotes the reaction of aryl, and allyl chlorides with (hetero)aryl-, alkyl-, and allyllithium compounds as well as lithium amides. None of these reactions proceeded in the presence of palladium salts alone. The preparative utility of this approach was demonstrated by the synthesis of 49 molecules, including pharmaceutically relevant compounds.

Werner Salt as Nickel and Ammonia Source for Photochemical Synthesis of Primary Aryl Amines.

Cheap, stable and easy-to-handle Werner ammine salts have been known for more than a century; but they have been rarely used in organic synthesis. Herein, we report that the Werner hexammine complex [Ni(NH3 )6 ]Cl2 can be used as both a nitrogen and a catalytic nickel source that allow for the efficient amination of aryl chlorides in the presence of a catalytic amount of bipyridine ligand under the irradiation of 390-395 nm light without the need of any additional catalysts. More than 80 aryl chlorides, including more than 20 drug molecules, were aminated, demonstrating the practicality and generality of this method in synthetic chemistry. A slow NH3 release mechanism is in operation, obviating the problem of catalyst poisoning. Still interestingly, we show that the Werner salt can be easily recovered and reused, solving the problem of difficult recovery of transition metal nickel catalysts. The protocol thus provides an efficient new strategy for the synthesis of primary aryl amines.

Facile Synthesis of Anhydrous Rare-Earth Trichlorides from their Oxides in Chloridoaluminate Ionic Liquids.

Wide applications of anhydrous rare-earth (RE) trichlorides RECl3 in organometallic chemistry, for the synthesis of optical and magnetic materials, and as catalysts require a facile approach for their synthesis. The known methods use or produce toxic substances, are complicated and have limited reliability and upscaling. It has been shown that task-specific ionic liquids (ILs) can dissolve many metal oxides without special reaction conditions at moderate temperature, making the metals accessible to downstream chemistry. Using imidazolium chloridoaluminate ILs, pure crystalline anhydrous RECl3 (RE=La-Nd, Sm-Dy) can be synthesized in one step from RE oxides in high yield. The Lewis acidic IL acts as solvent and reaction partner. The by-product [Al4 O2 Cl10 ]2- , which was detected spectroscopically, remains in solution. The reacted IL can be removed quantitatively by washing. ILs with various imidazolium cations and AlCl3 content and the effect of temperature and reaction time were tested.

Advancements in hydrochlorination of alkenes.

The hydrochlorination of alkenes has been extensively studied in research and is commonly featured in organic chemistry textbooks as an exemplification of the Markovnikov rule. However, the application of this reaction is typically limited to specific alkenes, such as highly substituted ones, styrenes, or strained systems. Conversely, monosubstituted or 1,2-disubstituted alkenes do not readily react with HCl gas or solutions of HCl gas at practical rates. The challenges associated with hydrochlorination reactions for these "non-activated" alkenes have spurred considerable research efforts over the past 30 years, which constitute the primary focus of this review. The discussion begins with classical polar hydrochlorinations, followed by metal-promoted radical hydrochlorinations, and concludes with a brief overview of recent anti-Markovnikov hydrochlorinations.

Synthesis, Molecular Docking, and Dynamic Simulation Targeting Main Protease (Mpro) of New, Thiazole Clubbed Pyridine Scaffolds as Potential COVID-19 Inhibitors.

Many biological activities of pyridine and thiazole derivatives have been reported, including antiviral activity and, more recently, as COVID-19 inhibitors. Thus, in this paper, we designed, synthesized, and characterized a novel series of N-aminothiazole-hydrazineethyl-pyridines, beginning with a N'-(1-(pyridine-3-yl)ethylidene)hydrazinecarbothiohydrazide derivative and various hydrazonoyl chlorides and phenacyl bromides. Their Schiff bases were prepared from the condensation of N-aminothiazole derivatives with 4-methoxybenzaldehyde. FTIR, MS, NMR, and elemental studies were used to identify new products. The binding energy for non-bonding interactions between the ligand (studied compounds) and receptor was determined using molecular docking against the SARS-CoV-2 main protease (PDB code: 6LU7). Finally, the best docked pose with highest binding energy (8a = -8.6 kcal/mol) was selected for further molecular dynamics (MD) simulation studies to verify the outcomes and comprehend the thermodynamic properties of the binding. Through additional in vitro and in vivo research on the newly synthesized chemicals, it is envisaged that the achieved results will represent a significant advancement in the fight against COVID-19.

Metallaphotocatalytic Amination of Aryl Chlorides Enabled by Highly Crystalline Acetylene-Based Hydrazone-Linked Covalent Organic Frameworks.

Amination of aryl chlorides by metallaphotocatalysis is highly desired but remains practically challenging. Meanwhile, relying on soluble noble-metal photocatalysts suffers from resource scarcity and structural instability which limit their practical application. Here in, a highly crystalline acetylene-based hydrazone-linked covalent organic framewok-1 (AC-COF-1) is reported that enables metallaphotocatalytic amination of aryl chlorides. The non-planar effect of hydrazone linkage and weak interlayer attraction of acetylene bond are minimized by intralayer hydrogen-bonding. As a result, the COF shows not only improved crystallinity and porosity, but also enhanced optical and electronic properties compared to a COF analog without hydrogen-bonding. Notably, dual AC-COF-1/Ni system affords CN coupling products from broad aryl chloride substrates in excellent yields (up to 99%) and good functional tolerance. Furthermore, AC-COF-1 is recoverable and reusable for seven times photocatalysis cycles. This report demonstrates simple approach to tune the structure-activity relationship in COFs at molecular level.

Rhodium-Catalyzed Formylation of Unactivated Alkyl Chlorides to Aldehydes.

The first rhodium-catalyzed formylation of non-activated alkyl chlorides with syn gas (H2 /CO) allows to produce aldehydes in high yields (25 examples). A catalyst optimization study revealed Rh(acac)(CO)2 in the presence of 1,3-bisdiphenylphosphinopropane (DPPP) as the most active catalyst system for this transformation. Key for the success of the reaction is the addition of sodium iodide (NaI) to the reaction system, which leads to the formation of activated alkyl iodides as intermediates. Depending on the reaction conditions, either the linear or branched aldehydes can be preferentially obtained, which is explained by a different mechanism.

Superionic Conductivity in Sodium Zirconium Chloride-Based Compounds.

All-solid-state sodium batteries are attracting intensive attention, and chloride-based solid electrolytes are promising candidates for use in such batteries because of their high chemical stability and low Young's modulus. Here, we report new superionic conductors based on polyanion-added chloride-based materials. Na0.67 Zr(SO4 )0.33 Cl4 showed a high ionic conductivity of 1.6 mS cm-1 at room temperature. X-ray diffraction analysis indicated that the highly conducting materials are mainly a mixture of an amorphous phase and Na2 ZrCl6 . The conductivity might be dominated by the electronegativity of the central atom of the polyanion. Electrochemical measurements reveal that Na0.67 Zr(SO4 )0.33 Cl4 is a sodium ionic conductor and is suitable for use as a solid electrolyte in all-solid-state sodium batteries.

Metal-Free Direct C3-H Alkylation and Arylation of Quinoxalin-2(1H)-Ones with Inert Alkyl and Aryl Chlorides.

In the present manuscript, we reported the first visible-light-enabled direct C3-H alkylation/arylation of quinoxalin-2(1H)-ones with unactivated alkyl/aryl chlorides under metal-free conditions. A wide range of unactivated alkyl and aryl chlorides containing different functionalities are coupled with a variety of quinoxalin-2(1H)-one derivatives under mild reaction conditions to afford the C3-alkyl/aryl substituted quinoxalin-2(1H)-ones in moderate to good yields.

Progress in the Enantioselective Synthesis of Sulfur (VI) Compounds.

In recent years, there has been a notable surge in the prominence of enantioenriched sulfur(VI) compounds within the chemical science, particularly in the realm of bioactive molecules. However, the synthesis of these enantioenriched sulfur(VI) compounds has posed significant challenges, necessitating the exploration of diverse synthetic methods. Accordingly, this review aims to provide an in-depth analysis of the latest advancements in the synthesis of sulfoximines, sulfonimidate esters, sulfonimidamides, and sulfonimidoyl halides, with a focus on developments since 1971.

Toward systematic understanding of adsorptive removal of legacy and emerging per-and polyfluoroalkyl substances (PFASs) by various activated carbons (ACs).

Per-and polyfluoroalkyl substances (PFASs) have received great attention due to their persistence, bioaccumulation and toxicity. Various activated carbons (ACs) exhibit wide variability in adsorptive performance towards PFASs. In order to gain a systematic understanding of adsorptive removal of legacy and emerging PFASs by ACs, the adsorption of ten PFASs on various ACs was comprehensively investigated. Results showed that granular activated carbon-1 (GAC-1) and powdered activated carbon-1 (PAC-1) removed more than 90% of all target PFASs. Particle size, surface charge, and micropores quantity of ACs were closely related to their performance for PFASs removal. Electrostatic interaction, hydrophobic interaction, surface complexation and hydrogen bonding were the adsorption mechanisms, with hydrophobic interaction being the predominant adsorptive force. Physical and chemical adsorption were both involved in PFAS adsorption. The removal rates of PFASs by GAC-1 decreased from 93%-100% to 15%-66% in the presence of 5 mg/L fulvic acid (FA). GAC was able to remove more PFASs under acidic medium, whereas PAC removed hydrophobic PFASs better under the neutral medium. The removal rates of PFASs by GAC-3 increased significantly from 0%-21% to 52%-97% after being impregnated with benzalkonium chlorides (BACs), demonstrating the superiority of this modification method. Overall, this study provided theoretical support for removing PFASs from water phase with ACs.