Interlayer engineering of Fe3GeTe2: From 3D superlattice to 2D monolayer.

The discoveries of ferromagnetism down to the atomically thin limit in van der Waals (vdW) crystals by mechanical exfoliation have enriched the family of magnetic thin films [C. Gong et al., Nature 546, 265-269 (2017) and B. Huang et al., Nature 546, 270-273 (2017)]. However, compared to the study of traditional magnetic thin films by physical deposition methods, the toolbox of the vdW crystals based on mechanical exfoliation and transfer suffers from low yield and ambient corrosion problem and now is facing new challenges to study magnetism. For example, the formation of magnetic superlattice is difficult in vdW crystals, which limits the study of the interlayer interaction in vdW crystals [M. Gibertini, M. Koperski, A. F. Morpurgo, K. S. Novoselov, Nat. Nanotechnol. 14, 408-419 (2019)]. Here, we report a strategy of interlayer engineering of the magnetic vdW crystal Fe3GeTe2 (FGT) by intercalating quaternary ammonium cations into the vdW spacing. Both three-dimensional (3D) vdW superlattice and two-dimensional (2D) vdW monolayer can be formed by using this method based on the amount of intercalant. On the one hand, the FGT superlattice shows a strong 3D critical behavior with a decreased coercivity and increased domain wall size, attributed to the co-engineering of the anisotropy, exchange interaction, and electron doping by intercalation. On the other hand, the 2D vdW few layers obtained by over-intercalation are capped with organic molecules from the bulk crystal, which not only enhances the ferromagnetic transition temperature (TC), but also substantially protects the thin samples from degradation, thus allowing the preparation of large-scale FGT ink in ambient environment.

Lack of evidence for GWAS signals of exfoliation glaucoma working via monogenic loss-of-function mutation in the nearest gene.

PURPOSE: Exfoliation syndrome (XFS) is a systemic disease of elastin-rich tissues involving a deposition of fibrillar exfoliative material (XFM) in the anterior chamber of the eye, which can promote glaucoma. The purpose of this study was to create mice with CRISPR/Cas9-induced variations in candidate genes identified from human genome-wide association studies (GWAS) and screen them for indices of XFS. METHODS: Variants predicted to be deleterious were sought in the Agpat1, Cacna1a, Loxl1, Pomp, Rbms3, Sema6a, and Tlcd5 genes of C57BL/6J mice using CRISPR/Cas9-based gene editing. Strains were phenotyped by slit-lamp, SD-OCT imaging, and fundus exams at 1-5 mos of age. Smaller cohorts of 12-mos-old mice were also studied. RESULTS: Deleterious variants were identified in six targets; Pomp was recalcitrant to targeting. Multiple alleles of some targets were isolated, yielding 12 strains. Across all genotypes and ages, 277 mice were assessed by 902 slit-lamp exams, 928 SD-OCT exams, and 358 fundus exams. Homozygosity for Agpat1 or Cacna1a mutations led to early lethality; homozygosity for Loxl1 mutations led to pelvic organ prolapse, preventing aging. Loxl1 homozygotes exhibited a conjunctival phenotype of potential relevance to XFS. Multiple other genotype-specific phenotypes were variously identified. XFM was not observed in any mice. CONCLUSIONS: This study did not detect XFM in any of the strains. This may have been due to species-specific differences, background dependence, or insufficient aging. Alternatively, it is possible that the current candidates, selected based on proximity to GWAS signals, are not effectors acting via monogenic loss-of-function mechanisms.

Loss of Bladder Epithelium Induced by Cytolytic Mast Cell Granules.

Programmed death and shedding of epithelial cells is a powerful defense mechanism to reduce bacterial burden during infection but this activity cannot be indiscriminate because of the critical barrier function of the epithelium. We report that during cystitis, shedding of infected bladder epithelial cells (BECs) was preceded by the recruitment of mast cells (MCs) directly underneath the superficial epithelium where they docked and extruded their granules. MCs were responding to interleukin-1ß (IL-1ß) secreted by BECs after inflammasome and caspase-1 signaling. Upon uptake of granule-associated chymase (mouse MC protease 4 [mMCPT4]), BECs underwent caspase-1-associated cytolysis and exfoliation. Thus, infected epithelial cells require a specific cue for cytolysis from recruited sentinel inflammatory cells before shedding.

Engineering Charge Density Waves by Stackingtronics in Tantalum Disulfide.

In the realm of condensed matter physics and materials science, charge density waves (CDWs) have emerged as a captivating way to modulate correlated electronic phases and electron oscillations in quantum materials. However, collectively and efficiently tuning CDW order is a formidable challenge. Herein, we introduced a novel way to modulate the CDW order in 1T-TaS2 via stacking engineering. By introducing shear strain during the electrochemical exfoliation, the thermodynamically stable AA-stacked TaS2 consecutively transform into metastable ABC stacking, resulting in unique 3a × 1a CDW order. By decoupling atom coordinates, we atomically deciphered the 3D subtle structural variations in trilayer samples. As suggested by density functional theory (DFT) calculations, the origin of CDWs is presumably due to collective excitations and charge modulation. Therefore, our works shed light on a new avenue to collectively modulate the CDW order via stackingtronics and unveiled novel mechanisms for triggering CDW formation via charge modulation.

Liquid-Metal-Based Spin-Coating Exfoliation for Atomically Thin Metal Oxide Synthesis.

Two-dimensional (2D) semiconductors possess exceptional electronic, optical, and magnetic properties, making them highly desirable for widespread applications. However, conventional mechanical exfoliation and epitaxial growth methods are insufficient in meeting the demand for atomically thin films covering large areas while maintaining high quality. Herein, leveraging liquid metal oxidation reaction, we propose a motorized spin-coating exfoliation strategy to efficiently produce large-area 2D metal oxide (2DMO) semiconductors with high crystallinity, atomically thin thickness, and flat surfaces on diverse substrates. Moreover, we realized a 2D gallium oxide-based deep ultraviolet solar-blind photodetector featuring a metal-semiconductor-metal structure, showcasing high responsivity (8.24 A W-1) at 254 nm and excellent sensitivity (4.3 × 1012 cm Hz1/2 W-1). This novel liquid-metal-based spin-coating exfoliation strategy offers great potential for synthesizing atomically thin 2D semiconductors, opening new avenues for future functional electronic and optical applications.

Wafer-Scale Transferrable GaN Enabled by Hexagonal Boron Nitride for Flexible Light-Emitting Diode.

Epitaxy growth and mechanical transfer of high-quality III-nitrides using 2D materials, weakly bonded by van der Waals force, becomes an important technology for semiconductor industry. In this work, wafer-scale transferrable GaN epilayer with low dislocation density is successfully achieved through AlN/h-BN composite buffer layer and its application in flexible InGaN-based light-emitting diodes (LEDs) is demonstrated. Guided by first-principles calculations, the nucleation and bonding mechanism of GaN and AlN on h-BN is presented, and it is confirmed that the adsorption energy of Al atoms on O2 -plasma-treated h-BN is over 1 eV larger than that of Ga atoms. It is found that the introduced high-temperature AlN buffer layer induces sufficient tensile strain during rapid coalescence to compensate the compressive strain generated by the heteromismatch, and a strain-relaxation model for III-nitrides on h-BN is proposed. Eventually, the mechanical exfoliation of single-crystalline GaN film and LED through weak interaction between multilayer h-BN is realized. The flexible free-standing thin-film LED exhibits ≈66% luminescence enhancement with good reliability compared to that before transfer. This work proposes a new approach for the development of flexible semiconductor devices.

Unveiling Liquid-Phase Exfoliation of Graphite and Boron Nitride Using Fluorescent Dyes Through Combined Experiments and Simulations.

Liquid-phase exfoliation (LPE) in aqueous solutions provides a simple, scalable, and green approach to produce 2D materials. By combining atomistic simulations with exfoliation experiments, the interaction between a surfactant and a 2D layer at the molecular scale can be better understood. In this work, two different dyes, corresponding to rhodamine B base (Rbb) and to a phenylboronic acid BODIPY (PBA-BODIPY) derivative, are employed as dispersants to exfoliate graphene and hexagonal boron nitride (hBN) through sonication-assisted LPE. The exfoliated 2D sheets, mostly as few-layers, exhibit good quality and high loading of dyes. Using molecular dynamics (MD) simulations, the binding free energies are calculated and the arrangement of both dyes on the layers are predicted. It has been found that the dyes show a higher affinity toward hBN than graphene, which is consistent with the higher yields of exfoliated hBN. Furthermore, it is demonstrated that the adsorption behavior of Rbb molecules on graphene and hBN is quite different compared to PBA-BODIPY.

Bayesian Optimization of Environmentally Sustainable Graphene Inks Produced by Wet Jet Milling.

Liquid phase exfoliation (LPE) of graphene is a potentially scalable method to produce conductive graphene inks for printed electronic applications. Among LPE methods, wet jet milling (WJM) is an emerging approach that uses high-speed, turbulent flow to exfoliate graphene nanoplatelets from graphite in a continuous flow manner. Unlike prior WJM work based on toxic, high-boiling-point solvents such as n-methyl-2-pyrollidone (NMP), this study uses the environmentally friendly solvent ethanol and the polymer stabilizer ethyl cellulose (EC). Bayesian optimization and iterative batch sampling are employed to guide the exploration of the experimental phase space (namely, concentrations of graphite and EC in ethanol) in order to identify the Pareto frontier that simultaneously optimizes three performance criteria (graphene yield, conversion rate, and film conductivity). This data-driven strategy identifies vastly different optimal WJM conditions compared to literature precedent, including an optimal loading of 15 wt% graphite in ethanol compared to 1 wt% graphite in NMP. These WJM conditions provide superlative graphene production rates of 3.2 g hr-1 with the resulting graphene nanoplatelets being suitable for screen-printed micro-supercapacitors. Finally, life cycle assessment reveals that ethanol-based WJM graphene exfoliation presents distinct environmental sustainability advantages for greenhouse gas emissions, fossil fuel consumption, and toxicity.

The Simpler the Better: Ultrafast Air-Plasma Synthesis of 3D Crosslinked Graphene Nanoscroll-Nanosheet Aerogels at Room Temperature for Capacitive Deionization.

Graphene nanoscroll (GNS) is an important 1D tubular form of graphene-derivative materials, which has garnered widely attention. However, conventional fabrication methods commonly suffer from complex processing and time-consuming. Herein, with graphene oxide (GO) as a precursor, the study puts forward a facile air-plasma synthesis strategy to fabricate 3D graphene nanoscroll-nanosheet aerogels (GSSA). It is demonstrated that without using any chemical additives, a highly efficient reduction-exfoliation-scrolling process can be achieved all-in-one at room temperature within 1 s. The GNSs "grew" from 2D graphene sheets and firmly cross-linked them together, and they not only provide a shortcut path for electron transport but also act as intrinsic spacers to prevent restacking of graphene sheets. When using as an electrode material for capacitive deionization (CDI), GSSA exhibits excellent merits of salt-removal performance. These findings open a new pathway to large-scale synthesis of high-quality and high-purity GNS-based materials with promising applications in CDI and beyond.

Mechanically Exfoliated Graphite for Highly Reversible Na-Storage with Carbon Coated Na3V2(PO4)3 Cathode with Low-Temperature Conditions.

Tremendous efforts are put forward to develop novel high-performance electrodes for Na-ion batteries (SIBs) in order to replace commercial Li-ion batteries (LIBs). Graphite, the most versatile anode for LIBs, fails to accommodate Na+ions owing to the poor thermodynamic stability of the binary graphite intercalation compound. This study aims to exfoliate the layers of graphite through a simple mechanical process at different time intervals (1, 5, 10, 20, 40, and 80 h) and examine the potential candidate for Na-storage in the presence of carbonate-based electrolytes. This study reports that ball milling plays a vital role in the performance of the graphite in Na-storage. The graphite exfoliated for 80 h (EG-80h) rendered an excellent reversible capacity of 209 mAh g-1 with coulombic efficiency of >99% after 100 cycles in EC-based electrolyte. In situ impedance analysis is performed to validate the charge storage mechanism and Na-ion kinetics. The performance of EG-80h in a full-cell assembly is evaluated with a carbon-coated Na3V2(PO4)3 cathode, which exhibited an initial capacity of ≈75 mAh g-1 and energy density of 201 Wh kg-1. In addition, the adaptability of the NVPC/EG-80h cell at different temperatures is examined from -10 to 50 °C, displaying excellent performance in both high and low-temperature conditions.

Heteroatoms-Doped Mesoporous Carbon Nanosheets with Dual Diffusion Pathways for Highly Efficient Potassium Ion Storage.

The high potassization/depotassization energy barriers and lack of efficient ion diffusion pathways are two serious obstacles for carbon-based materials to achieve satisfactory potassium ion storage performance. Herein, a facile and controllable one-step exfoliation-doping-etching strategy is proposed to construct heteroatoms (N, O, and S)-doped mesoporous few-layer carbon nanosheets (NOS-C). The mixed molten salts of KCl/K2SO4 are innovatively used as the exfoliators, dopants, and etching agents, which enable NOS-C with expanded interlayer spacing and uniformly distributed mesopores with the adjusted electronic structure of surrounding carbon atoms, contributing efficient dual (vertical and horizontal) K-ion diffusion pathways, low potassization/depotassization energy barriers and abundant active sites. Thus, the NOS anodes achieve a high reversible capacity of 516.8 mAh g-1 at 0.05 A g-1, superior rate capability of 202.8 mAh g-1 at 5 A g-1 and excellent long-term cyclic stability, and their practical application potential is demonstrated by the assembled potassium-ion full batteries. Moreover, a surface-interlayer synergetic K+ storage mechanism is revealed by a combined theoretical and experimental approach including in situ EIS, in situ Raman, ex situ XPS, and SEM analysis. The proposed K+ storage mechanism and unique structural engineering provide a new pathway for potassium-ion storage devices and even beyond.

Transfer of High-Temperature-Sputtered BiFeO3 Thin Films onto Flexible Substrates Using α-MoO3 Layers.

Inducing external strains on highly oriented thin films transferred onto mechanically deformable substrates enables a drastic enhancement of their ferroelectric, magnetic, and electronic performances, which cannot be achieved in films on rigid single crystals. Herein, the growth and diffusion behaviors of BiFeO3 thin films grown at various temperatures is reported on α-MoO3 layers of different thicknesses using sputtering. When the BiFeO3 thin films are deposited at a high temperature, significant diffusion of Fe into α-MoO3 occurs, producing the Fe1.89Mo4.11O7 phase and suppressing the maintenance of the 2D structure of the α-MoO3 layers. Although lowering the deposition temperature alleviates the diffusion yielding the survival of the α-MoO3 layer, enabling exfoliation, the BiFeO3 is amorphous and the formation of the Fe1.89Mo4.11O7 phase cannot be suppressed at the crystallization temperature. High-temperature-grown BiFeO3 thin films are successfully transferred onto flexible substrates via mechanical exfoliation by introducing a blocking layer of Au and measured the ferroelectric properties of the transferred films.

π-Conjugated Macrocycles Confined Dual Single-Atom Catalysts on Graphitized Bubbles for Oxygen Reduction, Evolution, and Batteries.

It is a great demand to develop high-performance electrodes for metal-air batteries to boost cathodic oxygen reduction/evolution dynamics and avoid anodic dendrites. The optimization of catalysis at electrode can be conducted by increasing effective surface exposure, active site density, and unsaturated coordination, via using metal clusters or atomic catalysts, along with conductive or defective supports. Herein, the polarized and synergistic cooperation between dual single atom sites (Fe-N4/Co-N4) are developed through electrolytical exfoliation of defect-enriched π-conjugated macrocyclic polyphthalocyanines to expose more active sites on hollow carbonized shells (HCS). Such FeCo-N4/HCS exhibits outstanding performance in oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), to achieve high-performance in an aqueous zinc battery (AZB) with a high discharge capacity (763.6 mAhg-1) after 750 cycles at 10 mA cm-2, showing stable discharge voltage and excellent durability. It also possesses high performance in a lithium-O2 battery owing to abundant defects, synergistic Fe-N4/Co-N4 active sites, reduced energy barriers, and boosted charge and mass transfer and reaction kinetics. This study provides novel perspectives to expand dual single-metal catalysts on macrocycles in the exploration of efficient, durable, and eco-friendly energy devices.

Layered Double Hydroxide Nanosheets: Synthesis Strategies and Applications in the Field of Energy Conversion.

In recent years, layered double hydroxides (LDH) nanosheets have garnered substantial attention as intriguing inorganic anionic layered clay materials. These nanosheets have captured the attention of researchers due to their unique physicochemical properties. This review aims to showcase the latest advancements in laboratory research concerning LDH nanosheets, with a specific emphasis on their methods of preparation. This review provides detailed insights into the factors influencing the anionic conductivity of LDH, along with delineating the applications of LDH nanosheets in the realm of energy conversion. Notably, the review highlights the crucial role of LDH nanosheets in the oxygen evolution reaction (OER), a vital process in water splitting and diverse electrochemical applications. The review emphasizes the significant potential of LDH nanosheets in enhancing supercapacitor technology, owing to their high surface area and exceptional charge storage capacity. Additionally, it elucidates the prospective application of LDH nanosheets as anion exchange membranes in anion exchange membrane fuel cells, potentially revolutionizing fuel cell performance through improved efficiency and stability facilitated by enhanced ion transport properties.

Recent progress in MoS2 nanostructures for biomedical applications: Experimental and computational approach.

In the category of 2D materials, MoS2 a transition metal dichalcogenide, is a novel and intriguing class of materials with interesting physicochemical properties, explored in applications ranging from cutting-edge optoelectronic to the frontiers of biomedical and biotechnology. MoS2 nanostructures an alternative to heavy toxic metals exhibit biocompatibility, low toxicity and high stability, and high binding affinity to biomolecules. MoS2 nanostructures provide a lot of opportunities for the advancement of novel biosensing, nanodrug delivery system, electrochemical detection, bioimaging, and photothermal therapy. Much efforts have been made in recent years to improve their physiochemical properties by developing a better synthesis approach, surface functionalization, and biocompatibility for their safe use in the advancement of biomedical applications. The understanding of parameters involved during the development of nanostructures for their safe utilization in biomedical applications has been discussed. Computational studies are included in this article to understand better the properties of MoS2 and the mechanism involved in their interaction with biomolecules. As a result, we anticipate that this combined experimental and computational studies of MoS2 will inspire the development of nanostructures with smart drug delivery systems, and add value to the understanding of two-dimensional smart nano-carriers.

Atomically thin-layered WS2based resistive sensors for detection of CO and NO2at room temperature.

The number of layers present in a two-dimensional (2D) nanomaterial plays a critical role in applications that involve surface interaction, for example, gas sensing. This paper reports the synthesis of 2D WS2nanoflakes using the facile liquid exfoliation technique. The nanoflakes were exfoliated using bath sonication (BS-WS2) and probe sonication (PS-WS2). The thickness of the BS-WS2was found to range between 70 and 200 nm, and that of PS-WS2varied from 0.6 to 80 nm, indicating the presence of single to few layers of WS2when characterized using atomic force microscope. All the WS2samples were thoroughly characterized using electron microscopes, x-ray diffractometer, Raman spectroscopy, UV-Visible spectroscopy, Fourier transform infrared spectroscope, and thermogravimetric analyser. Both the nanostructured samples were exposed to 2 ppm of NO2at room temperature. Interestingly, BS-WS2which comprises of a greater number of WS2layers exhibited -14.2% response as against -3.4% response of PS-WS2, the atomically thin sample. The BS-WS2sample was found to be highly selective towards NO2but was slower (with incomplete recovery) as compared to PS-WS2. The PS-WS2sample was observed to exhibit -11.9% to -27.4% response to 2-10 ppm of CO and -3.4%-35.2% response to 2-10 ppm of NO2at room temperature, thereby exhibiting the potential to detect two gases simultaneously. These gases could be accurately predicted and quantified if the response times of the PS-WS2sample were considered. The atomically thin WS2-based sensor exhibited a limit of detection of 131 and 81 ppb for CO and NO2, respectively.

Electrochemical detection of sulfanilamide using tannic acid exfoliated MoS2 nanosheets combined with reduced graphene oxide/graphite.

Sulfonamides are a family of synthetic drugs with a broad-spectrum of antimicrobial activity. Like other antimicrobials, they have been found in aquatic environments, making their detection important. Herein, an electrochemical sensor was designed using tannic acid exfoliated few-layered MoS2 sheets, which were combined with a mixture of reduced graphene oxide (rGO) and graphite flakes (G). The rGO/G was formed using electrodeposition, by cycling from -0.5 to -1.5 V in an acidified sulfate solution with well dispersed GO and G. The exfoliated MoS2 sheets were drop cast over the wrinkled rGO/G surface to form the final sensor, GCE/rGO/G/ta-MoS2. The mixture of rGO/G was superior to pure rGO in formulating the sensor. The fabricated sensor exhibited an extended linear range from 0.1 to 566 µM, with a LOD of 86 nM, with good selectivity in the presence of various salts found in water and structurally related drugs from the sulfonamide family. The sensor showed very good reproducibility with the RSD at 0.48 %, repeatability and acceptable long term stability over a 10-day period. Good recovery from both tap and river water was achieved, with recovery ranging from 90.4 to 98.9 % for tap water and from 83.5 to 94.4 % for real river water samples.

Identification of biomarker candidates for exfoliative glaucoma from autoimmunity profiling.

BACKGROUND: Exfoliative glaucoma (XFG) is a subtype of open-angle glaucoma characterized by distinctive extracellular fibrils and a yet unknown pathogenesis potentially involving immune-related factors. The aim of this exploratory study was to identify biomarkers for XFG using data from autoimmunity profiling performed on blood samples from a Scandinavian cohort of patients. METHODS: Autoantibody screening was analyzed against 258 different protein fragments in blood samples taken from 30 patients diagnosed with XFG and 30 healthy donors. The 258 protein fragments were selected based on a preliminary study performed on 3072 randomly selected antigens and antigens associated with the eye. The "limma" package was used to perform moderated t-tests on the proteomic data to identify differentially expressed reactivity between the groups. RESULTS: Multiple associated genes were highlighted as possible biomarker candidates including FUT2, CDH5, and the LOX family genes. Using seven variables, our binary logistic regression model was able to classify the cases from the controls with an AUC of 0.85, and our reduced model using only one variable corresponding to the FUT2 gene provided an AUC of 0.75, based on LOOCV. Furthermore, over-representation gene analysis was performed to identify pathways that were associated with antigens differentially bound to self-antibodies. This highlighted the enrichment of pathways related to collagen fibril formation and the regulatory molecules mir-3176 and mir-876-5p. CONCLUSIONS: This study suggests several potential biomarkers that may be useful in developing further models of the pathology of XFG. In particular, CDH5, FUT2, and the LOX family seem to have a relationship which merits additional exploration.

Shear Strain-Induced Two-Dimensional Slip Avalanches in Rhombohedral MoS2.

Slip avalanches are ubiquitous phenomena occurring in three-dimensional materials under shear strain, and their study contributes immensely to our understanding of plastic deformation, fragmentation, and earthquakes. So far, little is known about the role of shear strain in two-dimensional (2D) materials. Here we show some evidence of 2D slip avalanches in exfoliated rhombohedral MoS2, triggered by shear strain near the threshold level. Utilizing interfacial polarization in 3R-MoS2, we directly probe the stacking order in multilayer flakes and discover a wide variety of polarization domains with sizes following a power-law distribution. These findings suggest that slip avalanches can occur during the exfoliation of 2D materials, and the stacking orders can be changed via shear strain. Our observation has far-reaching implications for the development of new materials and technologies, where precise control over the atomic structure of these materials is essential for optimizing their properties as well as for our understanding of fundamental physical phenomena.

Quartz Nonadherent and Clean Exfoliation of the Heteroatom-Doped Bulk Carbon Nanotubes Array.

Vertically aligned carbon nanotubes array offers unique properties for various applications. Detaching them from the growth substrate, while preserving their vertical structure, is essential. Quartz, a cost-effective alternative to silicon wafers and metal-based substrates, can serve as both a reaction chamber and a growth substrate. However, the strong adhesive interaction with the quartz substrate remains an obstacle for further applications. Herein, we presented a simple and well-controlled exfoliation strategy assisted by the introduction of heteroatoms at root ends of a carbon nanotubes array. This strategy forms lower surface polarity of the carbon fragment to significantly reduce adhesion to the quartz substrate, which contributes to the effortless exfoliation. Furthermore, this scalable approach enables potential mass production on recyclable quartz substrates, enhancing the cost-effectiveness and efficiency. This work can establish a solid foundation for cost-competitive carbon nanotube-based technologies, offering a promising avenue for their widespread applications.