Dimeric Product of Peroxy Radical Self-Reaction Probed with VUV Photoionization Mass Spectrometry and Theoretical Calculations: The Case of C2H5OOC2H5.

Organic peroxy radicals (RO2) as key intermediates in tropospheric chemistry exert a controlling influence on the cycling of atmospheric reactive radicals and the production of secondary pollutants, such as ozone and secondary organic aerosols (SOA). Herein, we present a comprehensive study of the self-reaction of ethyl peroxy radicals (C2H5O2) by using advanced vacuum ultraviolet (VUV) photoionization mass spectrometry in combination with theoretical calculations. A VUV discharge lamp in Hefei and synchrotron radiation at the Swiss Light Source (SLS) are employed as the photoionization light sources, combined with a microwave discharge fast flow reactor in Hefei and a laser photolysis reactor at the SLS. The dimeric product, C2H5OOC2H5, as well as other products, CH3CHO, C2H5OH and C2H5O, formed from the self-reaction of C2H5O2 are clearly observed in the photoionization mass spectra. Two kinds of kinetic experiments have been performed in Hefei by either changing the reaction time or the initial concentration of C2H5O2 radicals to confirm the origins of the products and to validate the reaction mechanisms. Based on the fitting of the kinetic data with the theoretically calculated results and the peak area ratios in the photoionization mass spectra, a branching ratio of 10 ± 5% for the pathway leading to the dimeric product C2H5OOC2H5 is measured. In addition, the adiabatic ionization energy (AIE) of C2H5OOC2H5 is determined at 8.75 ± 0.05 eV in the photoionization spectrum with the aid of Franck-Condon calculations and its structure is revealed here for the first time. The potential energy surface of the C2H5O2 self-reaction has also been theoretically calculated with a high-level of theory to understand the reaction processes in detail. This study provides a new insight into the direct measurement of the elusive dimeric product ROOR and demonstrates its non-negligible branching ratio in the self-reaction of small RO2 radicals.

Bayesian Analysis of Femtosecond Pump-Probe Photoelectron-Photoion Coincidence Spectra with Fluctuating Laser Intensities.

This paper employs Bayesian probability theory for analyzing data generated in femtosecond pump-probe photoelectron-photoion coincidence (PEPICO) experiments. These experiments allow investigating ultrafast dynamical processes in photoexcited molecules. Bayesian probability theory is consistently applied to data analysis problems occurring in these types of experiments such as background subtraction and false coincidences. We previously demonstrated that the Bayesian formalism has many advantages, amongst which are compensation of false coincidences, no overestimation of pump-only contributions, significantly increased signal-to-noise ratio, and applicability to any experimental situation and noise statistics. Most importantly, by accounting for false coincidences, our approach allows running experiments at higher ionization rates, resulting in an appreciable reduction of data acquisition times. In addition to our previous paper, we include fluctuating laser intensities, of which the straightforward implementation highlights yet another advantage of the Bayesian formalism. Our method is thoroughly scrutinized by challenging mock data, where we find a minor impact of laser fluctuations on false coincidences, yet a noteworthy influence on background subtraction. We apply our algorithm to data obtained in experiments and discuss the impact of laser fluctuations on the data analysis.

The Distant Double Bond Determines the Fate of the Carboxylic Group in the Dissociative Photoionization of Oleic Acid.

The valence threshold photoionization of oleic acid has been studied using synchrotron VUV radiation and imaging photoelectron photoion coincidence (iPEPICO) spectroscopy. An oleic acid aerosol beam was impacted on a copper thermodesorber, heated to 130 °C, to evaporate the particles quantitatively. Upon threshold photoionization, oleic acid produces the intact parent ion first, followed by dehydration at higher energies. Starting at ca. 10 eV, a large number of fragment ions slowly rise suggesting several fragmentation coordinates with quasi-degenerate activation energies. However, water loss is the dominant low-energy dissociation channel, and it is shown to be closely related to the unsaturated carbon chain. In the lowest-barrier process, one of the four allylic hydrogen atoms is transferred to the carboxyl group to form the leaving water molecule and a cyclic ketone fragment ion. A statistical model to analyze the breakdown diagram and measured rate constants yields a 0 K appearance energy of 9.77 eV, which can be compared with the density functional theory result of 9.19 eV. Alternative H-transfer steps yielding a terminal C=O group are ruled out based on energetics and kinetics arguments. Some of the previous photoionization mass spectrometric studies also reported 2 amu and 26 amu loss fragment ions, corresponding to hydrogen and acetylene loss. We could not identify such peaks in the mass spectrum of oleic acid.

What a difference a chlorine makes: The remarkable unimolecular ion chemistry of phenyl formate and phenyl chloroformate.

Imaging photoelectron photoion coincidence (iPEPICO) spectroscopy and tandem mass spectrometry were employed to explore the ionisation and dissociative ionisation of phenyl formate (PF) and phenyl chloroformate (PCF). The threshold photoelectron spectra of both compounds are featureless and lack a definitive origin transition, owing to the internal rotation of the formate functional group relative to the benzene ring, active upon ionisation. CBS-QB3 calculations yield ionisation energies of 8.88 and 9.03 eV for PF and PCF, respectively. Ionised PF dissociates by the loss of CO via a transition state composed of a phenoxy cation and HCO moieties. The dissociation of PCF ions involves the competing losses of CO (m/z 128/130), Cl (m/z 121) and CO2 (m/z 112/114), with Cl loss also shown to occur from the second excited state in a non-statistical process. The primary CO- and Cl-loss fragment ions undergo sequential reactions leading to fragment ions at m/z 98 and 77. The mass-analysed ion kinetic energy (MIKE) spectrum of PCF+ showed that the loss of CO2 occurs with a large reverse energy barrier, which is consistent with the computationally derived minimum energy reaction pathway.

The Unimolecular Chemistry of Methyl Chloroformate Ions and Neutrals: A Story of Near-Threshold Decomposition.

The near-threshold dissociation of ionized and neutral methyl chloroformate (CH3COOCl, MCF) was explored with imaging photoelectron photoion coincidence spectroscopy. The threshold photoelectron spectrum (TPES) for MCF was acquired for the first time; the large geometry changes upon ionization of MCF result in a broad, poorly defined TPES. Franck-Condon simulations are consistent with an adiabatic ionization energy (IE) of 10.90 ± 0.05 eV. Ionized MCF dissociates by chlorine atom loss at a measured 0 K appearance energy (AE) of 11.30 ± 0.01 eV. Together with the above IE, this AE suggests a reaction barrier of 0.40 ± 0.05 eV, consistent with the SVECV-f12 computational result of 0.41 eV. At higher internal energies, the loss of CH3O• becomes competitive due to its lower entropy of activation. Pyrolysis of neutral MCF formed the anticipated major products CH3Cl + CO2 (R1) and the minor products HCl + CO + CH2O (R2). The thermal decomposition products were identified by their photoion mass-selected threshold photoelectron spectrum (ms-TPES). Possible reaction pathways were explored computationally to confirm the dominant ones: R1 proceeds by a concerted Cl atom migration via a four-membered transition state in agreement with the mechanism proposed in the literature. R2 is a two-step reaction first yielding 2-oxiranone by HCl loss, which then decomposes to CH2O and CO. Kinetic modeling of the neutral decomposition could simulate the observed reactions only if the vibrational temperature of the MCF was assumed not to cool in the expansion.

Probing the pyrolysis of ethyl formate in the dilute gas phase by synchrotron radiation and theory.

The thermal decomposition of the atmospheric constituent ethyl formate was studied by coupling flash pyrolysis with imaging photoelectron photoion coincidence (iPEPICO) spectroscopy using synchrotron vacuum ultraviolet (VUV) radiation at the Swiss Light Source (SLS). iPEPICO allows photoion mass-selected threshold photoelectron spectra (ms-TPES) to be obtained for pyrolysis products. By threshold photoionization and ion imaging, parent ions of neutral pyrolysis products and dissociative photoionization products could be distinguished, and multiple spectral carriers could be identified in several ms-TPES. The TPES and mass-selected TPES for ethyl formate are reported for the first time and appear to correspond to ionization of the lowest energy conformer having a cis (eclipsed) configuration of the O=C(H)-O-C(H2 )-CH3 and trans (staggered) configuration of the O=C(H)-O-C(H2 )-CH3 dihedral angles. We observed the following ethyl formate pyrolysis products: CH3 CH2 OH, CH3 CHO, C2 H6 , C2 H4 , HC(O)OH, CH2 O, CO2 , and CO, with HC(O)OH and C2 H4 pyrolyzing further, forming CO + H2 O and C2 H2  + H2 . The reaction paths and energetics leading to these products, together with the products of two homolytic bond cleavage reactions, CH3 CH2 O + CHO and CH3 CH2  + HC(O)O, were studied computationally at the M06-2X-GD3/aug-cc-pVTZ and SVECV-f12 levels of theory, complemented by further theoretical methods for comparison. The calculated reaction pathways were used to derive Arrhenius parameters for each reaction. The reaction rate constants and branching ratios are discussed in terms of the residence time and newly suggest carbon monoxide as a competitive primary fragmentation product at high temperatures.

Probing the pyrolysis of methyl formate in the dilute gas phase by synchrotron radiation and theory.

The thermal dissociation of the atmospheric constituent methyl formate was probed by coupling pyrolysis with imaging photoelectron photoion coincidence spectroscopy (iPEPICO) using synchrotron VUV radiation at the Swiss Light Source (SLS). iPEPICO allows threshold photoelectron spectra to be obtained for pyrolysis products, distinguishing isomers and separating ionic and neutral dissociation pathways. In this work, the pyrolysis products of dilute methyl formate, CH3 OC(O)H, were elucidated to be CH3 OH + CO, 2 CH2 O and CH4 + CO2 as in part distinct from the dissociation of the radical cation (CH3 OH+• + CO and CH2 OH+ + HCO). Density functional theory, CCSD(T), and CBS-QB3 calculations were used to describe the experimentally observed reaction mechanisms, and the thermal decomposition kinetics and the competition between the reaction channels are addressed in a statistical model. One result of the theoretical model is that CH2 O formation was predicted to come directly from methyl formate at temperatures below 1200 K, while above 1800 K, it is formed primarily from the thermal decomposition of methanol.

Combustion in the future: The importance of chemistry.

Combustion involves chemical reactions that are often highly exothermic. Combustion systems utilize the energy of chemical compounds released during this reactive process for transportation, to generate electric power, or to provide heat for various applications. Chemistry and combustion are interlinked in several ways. The outcome of a combustion process in terms of its energy and material balance, regarding the delivery of useful work as well as the generation of harmful emissions, depends sensitively on the molecular nature of the respective fuel. The design of efficient, low-emission combustion processes in compliance with air quality and climate goals suggests a closer inspection of the molecular properties and reactions of conventional, bio-derived, and synthetic fuels. Information about flammability, reaction intensity, and potentially hazardous combustion by-products is important also for safety considerations. Moreover, some of the compounds that serve as fuels can assume important roles in chemical energy storage and conversion. Combustion processes can furthermore be used to synthesize materials with attractive properties. A systematic understanding of the combustion behavior thus demands chemical knowledge. Desirable information includes properties of the thermodynamic states before and after the combustion reactions and relevant details about the dynamic processes that occur during the reactive transformations from the fuel and oxidizer to the products under the given boundary conditions. Combustion systems can be described, tailored, and improved by taking chemical knowledge into account. Combining theory, experiment, model development, simulation, and a systematic analysis of uncertainties enables qualitative or even quantitative predictions for many combustion situations of practical relevance. This article can highlight only a few of the numerous investigations on chemical processes for combustion and combustion-related science and applications, with a main focus on gas-phase reaction systems. It attempts to provide a snapshot of recent progress and a guide to exciting opportunities that drive such research beyond fossil combustion.