Anti-inflammatory cerium-containing nano-scaled mesoporous bioactive glass for promoting regenerative capability of dental pulp cells.

AIMS: This study aimed to investigate the anti-inflammatory and odontoblastic effects of cerium-containing mesoporous bioactive glass nanoparticles (Ce-MBGNs) on dental pulp cells as novel pulp-capping agents. METHODOLOGY: Ce-MBGNs were synthesized using a post-impregnation strategy based on the antioxidant properties of Ce ions and proposed the first use of Ce-MBGNs for pulp-capping application. The biocompatibility of Ce-MBGNs was analysed using the CCK-8 assay and apoptosis detection. Additionally, the reactive oxygen species (ROS) scavenging ability of Ce-MBGNs was measured using the 2,7-Dichlorofuorescin Diacetate (DCFH-DA) probe. The anti-inflammatory effect of Ce-MBGNs on THP-1 cells was further investigated using flow cytometry and quantitative real-time polymerase chain reaction (RT-qPCR). Moreover, the effect of Ce-MBGNs on the odontoblastic differentiation of the dental pulp cells (DPCs) was assessed by combined scratch assays, RT-qPCR, western blotting, immunocytochemistry, Alizarin Red S staining and tissue-nonspecific alkaline phosphatase staining. Analytically, the secretions of tumour necrosis factor-α (TNF-α) and interleukin-1ß (IL-1ß) were detected with enzyme-linked immunosorbent assay (ELISA). RESULTS: Ce-MBGNs were confirmed to effectively scavenge ROS in THP-1-derived macrophages and DPCs. Flow cytometry and RT-qPCR assays revealed that Ce-MBGNs significantly inhibited the M1 polarization of macrophages (Mφ). Furthermore, the protein levels of TNF-α and IL-1ß were downregulated in THP-1-derived macrophages after stimulation with Ce-MBGNs. With a step-forward virtue of promoting the odontoblastic differentiation of DPCs, we further confirmed that Ce-MBGNs could regulate the formation of a conductive immune microenvironment with respect to tissue repair in DPCs, which was mediated by macrophages. CONCLUSIONS: Ce-MBGNs protected cells from self-produced oxidative damage and exhibited excellent immunomodulatory and odontoblastic differentiation effects on DPCs. As a pulp-capping agent, this novel biomaterial can exert anti-inflammatory effects and promote restorative dentine regeneration in clinical treatment. We believe that this study will stimulate further correlative research on the development of advanced pulp-capping agents.

Elective full pulpotomy in mature permanent teeth diagnosed with symptomatic irreversible pulpitis: a two years retrospective study.

AIM: To investigate the outcome of elective full pulpotomy, using calcium silicate-based cements (CSBC), after 2 years, in symptomatic mature permanent teeth with carious lesions, diagnosed as irreversible pulpitis, and analyse the capacity of Wolters et al. (2017) classification to predict the likelihood of treatment failure. METHODS: The treatment records of 56 patients with symptomatic mature teeth with carious lesions, diagnosed as irreversible pulpitis and treated by elective full pulpotomy, using CSBCs as pulp capping materials, were reviewed. Thirteen teeth were excluded. The remaining 43 teeth were evaluated retrospectively at 24 months. Fisher`s exact test with the Lancaster's mid-P adjustment was used to assess different outcomes amongst the diagnostic categories. RESULTS: Four of the cases failed before 24 months and required root canal treatment (RCT). Overall success rate at 2 years was 90.7% (39 of 43). An inverse, but non-significant, correlation was observed between the severity of pulpitis according to the Wolters classification and the treatment success rate (p > 0.05). The type of CSBC used was associated to the success rate (OR = 10.5; 95% C.I. = 0.5 - 207.4; p = 0.027), being 82% with Endosequence and 100% with Biodentine. Postoperative pain associated significantly to lower success rate (66.7%) (Odds ratio = 8.0; 95% C.I. = 0.7 - 95.9; p = 0.047). CONCLUSIONS: Elective full pulpotomy using a CSBC was a successful choice for the treatment of mature permanent teeth with symptoms indicative of irreversible pulpitis. There were no significant differences between the success rate of mild, moderate and severe pulpitis. Postoperative pain could be considered a risk marker for failure of full pulpotomy. The term "irreversible pulpitis" should be re-signified to indicate the need for access to the pulp chamber, rather than an indication for extraction or RCT.

Histological evaluation of the regenerative potential of a novel photocrosslinkable gelatin-treated dentin matrix hydrogel in direct pulp capping: an animal study.

BACKGROUND: To assess histologically the success of the pulp capping approach performed in traumatically exposed dogs' teeth using a novel injectable gelatin-treated dentin matrix light cured hydrogel (LCG-TDM) compared with LCG, MTA and TheraCal LC. METHODS: Sixty-four dogs' teeth were divided into two groups (each including 32 teeth) based on the post-treatment evaluation period: group I: 2 weeks and group II: 8 weeks. Each group was further subdivided according to the pulp capping material into four subgroups (n = 8), with subgroup A (light-cured gelatin hydrogel) as the control subgroup, subgroup B (LCG-TDM), subgroup C (TheraCal LC), and subgroup D (MTA). Pulps were mechanically exposed in the middle of the cavity floor and capped with different materials. An assessment of periapical response was performed preoperatively and at 8 weeks. After 2 and 8-week intervals, the dogs were sacrificed, and the teeth were stained with hematoxylin-eosin and graded by using a histologic scoring system. Statistical analysis was performed using the chi-square and Kruskal-Wallis tests (p = 0.05). RESULTS: All subgroups showed mild inflammation with normal pulp tissue at 2 weeks with no significant differences between subgroups (p ≤ 0.05), except for the TheraCal LC subgroup, which exhibited moderate inflammation (62.5%). Absence of a complete calcified bridge was reported in all subgroups at 2 weeks, while at 8 weeks, the majority of samples in the LCG-TDM and MTA-Angelus subgroups showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between them (p ≤ 0.05). However, the formed dentin in the LCG-TDM group was significantly thicker, with layers of ordered odontoblasts identified to create a homogeneous tubular structure and numerous dentinal tubule lines suggesting a favourable trend towards dentin regeneration. TheraCal LC samples revealed a reasonably thick dentin bridge with moderate inflammation (50%) and LCG showed heavily fibrous tissue infiltrates with areas of degenerated pulp with no signs of hard tissue formation. CONCLUSIONS: LCG-TDM, as an extracellular matrix-based material, has the potential to regenerate dentin and preserve pulp vitality, making it a viable natural alternative to silicate-based cements for healing in vivo dentin defects in direct pulp-capping procedures.

Pulpotomy versus pulpectomy in carious vital pulp exposure in primary incisors: a randomized controlled trial.

BACKGROUND: Pulpotomy as a minimally invasive pulp therapy technique is the treatment of choice for carious pulp exposures, however many pediatric dentists perform pulpectomies in vital primary incisors. The aim of this split mouth randomized controlled study was to compare formocresol pulpotomy and zinc-oxide and eugenol pulpectomy in the treatment of vital pulp exposure in primary incisors. METHODS: Contralateral pairs of incisors were randomly assigned to receive pulpotomy or pulpectomy in children aging from 18 to 66 months old and were followed up for 12 months. RESULTS: 39 pairs of incisors were included. Clinical and radiographical success rates showed no statistical significant difference (p = 1, p = 0.8 respectively). Relative risk measures for clinical success rates (RR = 1.03, 95%CI 0.87 to 1.23) and for radiographic success rates (RR = 1.03, 95%CI 0.83 to 1.29) with CIs including number one showing no difference between the two groups. The Survival rate using Kaplan-Meier survival analysis score showed 82% for pulpotomy and 74% for pulpectomy at 12 months (P = 0.2). CONCLUSIONS: Both pulpotomy and pulpectomy techniques can be used successfully in the treatment of carious vital pulp exposure in primary incisors. TRIAL REGISTRATION: The trial was retrospectively registered in Clinicaltrials .gov with this identifier NCT05589025 on 21/10/2022.

Outcome assessment methods of bioactive and biodegradable materials as pulpotomy agents in primary and permanent teeth: a scoping review.

BACKGROUND: Pulpotomy procedures aiming to preserve and regenerate the dentin-pulp complex have recently increased exponentially due to developments in the field of biomaterials and tissue engineering in primary and permanent teeth. Although the number of studies in this domain has increased, there is still scarcity of evidence in the current literature. OBJECTIVES: (1) Report the methods of outcome assessment of pulpotomy clinical trials in both primary and permanent teeth; (2) Identify the various bioactive agents and biodegradable scaffolds used in pulpotomy clinical trials in both primary and permanent teeth. MATERIALS AND METHODS: A scoping review of the literature was performed, including a search of primary studies on PubMed, Scopus, Web of Science, ProQuest and Clinicaltrials.gov. A search for controlled trials or randomized controlled trials published between 2012 and 2023 involving primary or permanent teeth receiving partial or full pulpotomy procedures using bioactive/regenerative capping materials was performed. RESULTS: 127 studies out of 1038 articles fulfilled all the inclusion criteria and were included in the current scoping review. More than 90% of the studies assessed clinical and radiographic outcomes. Histological, microbiological, or inflammatory outcomes were measured in only 9.4% of all included studies. Majority of the studies (67.7%) involved primary teeth. 119 studies used non-degradable bioactive cements, while biodegradable scaffolds were used by 32 studies, natural derivates and plant extracts studies were used in only 7 studies. Between 2012 (4 studies) and 2023 (11 studies), there was a general increase in the number of articles published. India, Egypt, Turkey, and Iran were found to have the highest total number of articles published (28, 28,16 and 10 respectively). CONCLUSIONS: Pulpotomy studies in both primary and permanent teeth relied mainly on subjective clinical and radiographic outcome assessment methods and seldom analyzed pulpal inflammatory status objectively. The use of biodegradable scaffolds for pulpotomy treatments has been increasing with an apparent global distribution of most of these studies in low- to middle-income countries. However, the development of a set of predictable outcome measures as well as long-term evidence from well conducted clinical trials for novel pulpotomy dressing materials are still required.

Comparative Evaluation of Effectiveness of Calcium Hydroxide, MTA, and TheraCal LC in Indirect Pulp Capping in Primary Molars: In Vivo Study.

AIM: This investigation aimed to observe the effects of Dycal, mineral trioxide aggregate (MTA), and TheraCal LC, as indirect pulp-capping materials in primary molars. MATERIALS AND METHODS: About 75 children with lower primary molars aged between 4 and 7 years suggested for IPC were selected and randomly allocated into: Group I - Dycal, group II - MTA, and group III - TheraCal LC. An immediate postoperative radiograph was taken after the procedure. Recall examination was done after 3 and 6 months for clinical and radiographic assessment. The radiographs were digitized, and the amount of thickness of dentin was assessed using Corel Draw software. The values were tabulated and subjected to paired t-tests and independent t-tests for intra and intergroup analysis, respectively. The p-value < 0.05 was considered statistically significant. RESULTS: There was a statistically significant increase in dentin thickness in the first 3 months compared to the 6-month follow-up. At the end of the research phase, TheraCal LC had more tertiary dentin deposited than MTA, followed by Dycal. CONCLUSION: TheraCal LC can be a reliable indirect pulp-capping agent in primary teeth. CLINICAL SIGNIFICANCE: Indirect pulp capping (IPC) is a very extensively employed treatment regimen to manage extensive caries. For many decades, calcium hydroxide has been regarded as the benchmark of pulp capping materials. With several advancements in materials for restoration, TheraCal LC a resin-modified, light-cured calcium silicate-filled liner serves as a pulp-capping agent and dentin protector, promoting pulp healing and preserving vitality as an obstacle cum protector of the dental pulp complex. How to cite this article: Thomas NA, Jobe J, Thimmaiah C, et al. Comparative Evaluation of Effectiveness of Calcium Hydroxide, MTA, and TheraCal LC in Indirect Pulp Capping in Primary Molars: In Vivo Study. J Contemp Dent Pract 2024;25(4):365-371.

Determining Factors in the Success of Direct Pulp Capping: A Systematic Review.

AIM: To elucidate the factors that determine the success of direct pulp capping (DPC) in permanent teeth with pulp exposure due to dental caries. MATERIALS AND METHODS: A comprehensive electronic search from 1980 to 2023 across PubMed, Scopus, and ISI Web databases was conducted using specific keywords and MeSH terms in Q1 or Q2 journals. Only prospective/retrospective clinical studies in English on 15 or more human permanent teeth with carious pulpal exposure treated with DPC agents-mineral trioxide aggregate (MTA), Biodentine, or calcium hydroxide with a rubber dam and minimum 1-year follow-up, were considered. The factors retrieved and analyzed were based on study design, patient age, sample size, type of cavity, exposure size and location, pulp diagnosis, solutions to achieve hemostasis, hemostasis time, capping material, restoration type, follow-up period, methods of evaluation, and overall success. REVIEW RESULTS: Out of 680 articles, only 16 articles were selected for the present systematic review on application of the selection criteria. A wide age range of patients from 6 to 88 years were considered among these studies with sample sizes ranging from 15 to 245 teeth with reversible pulpitis being the predominant diagnosis of the cases. Mineral trioxide aggregate as a capping material was evaluated in 4 studies as a lone agent, while compared with other capping agents such as biodentine or calcium hydroxide in 7 studies. The follow-up period ranged from 9 days to nearly 80 months. While both clinical and radiographic evaluation was carried out in all studies, cold testing dominated the clinical tests while IOPR was the common radiograph considered. Mineral trioxide aggregate success rate was higher and similar to biodentine than calcium hydroxide. CONCLUSION: Direct pulp capping has a high and predictable success rate in permanent teeth with carious exposure to reversible and irreversible pulpitis. Currently, mineral trioxide aggregate and biodentine have better long-term results in DPC than calcium hydroxide, hence, they should be used as an alternative to calcium hydroxide. Definitive restoration within a short period improves long-term prognosis. CLINICAL SIGNIFICANCE: The significance of this review lies in its provision of evidence-based information on the effectiveness of DPC and the factors that influence its success. By considering these factors, clinicians can optimize treatment outcomes and improve the long-term prognosis of the treated teeth. This systematic review serves as a valuable resource for clinicians and researchers in the field of endodontics. How to cite this article: Gomez-Sosa JF, Granone-Ricella M, Rosciano-Alvarez M, et al. Determining Factors in the Success of Direct Pulp Capping: A Systematic Review. J Contemp Dent Pract 2024;25(4):392-401.

Examination of surface porosity of current pulp capping materials by micro-computed tomography (micro-CT) method.

When dental pulp is exposed, it must be covered with a biocompatible material to form reparative dentine. The material used, besides being biocompatible, should have an ideal surface structure for the attachment, proliferation and differentiation of dental pulp stem cells. This study aimed to evaluate the porosity of the microstructures of four pulp capping materials using micro-computed tomography (micro-CT). Biodentine, Bioaggregate, TheraCal and Dycal materials were prepared according to the manufacturer's instructions using 2 × 9 mm Teflon molds. A total of 60 samples, 15 in each group, were scanned using micro-CT. Open and closed pores and the total porosity of the microstructures of the materials were assessed. The findings obtained from the study were analyzed via the Kruskal-Wallis test followed by the Mann-Whitney U test. The porosity of Bioaggregate was significantly higher than that of Biodentine, Dycal and TheraCal in all porosity values. While Biodentine did not show a statistically significant difference in open and total porosity values from either TheraCal or Dycal, closed porosity values of Dycal were significantly higher than those of Biodentine and TheraCal. Because of the affinity of cells to porous surfaces, the pulp capping materials' microstructure may affect the pulp capping treatment's success. From this perspective, the use of Bioaggregate in direct pulp capping may increase the success of treatment.

Inflammatory response and odontogenic differentiation of inflamed dental pulp treated with different pulp capping materials: An in vivo study.

AIM: Previous studies have evaluated the pulpal responses to calcium silicate cements (CSCs) on normal dental pulp, but investigations on the effects of CSCs on inflamed pulp are limited. This study aimed to test the inflammatory response and odontogenic differentiation of inflamed rat dental pulp after direct pulp capping with CSCs. METHODOLOGY: Wistar rat molars pulps were exposed for 48 h to induce inflammation and then capped with ProRoot MTA (Dentsply), Biodentine (Septodont), RetroMTA (Bio MTA) and Dycal (Dentsply Caulk). The degree of pulpal inflammation and hard tissue formation was evaluated by histological analysis. Immunofluorescence staining for interleukin (IL)-6, osteocalcin (OCN) and runt-related transcription factor 2 (RUNX2) was also performed. RESULTS: After 4 weeks, complete recovery from inflammation was evident in 22%, 37.5%, 10% and none of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. Heavy hard tissue deposition as a continuous hard tissue bridge was observed in 77.8%, 75%, 70% and 60% of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. IL-6, OCN and RUNX2 were detected in all materials, mainly adjacent to areas of inflammation and reparative dentine formation. At one, two and 4 weeks, significant differences were not observed between the inflammation and hard tissue formation scores of the four material groups (p > .05). CONCLUSIONS: In this study, pulpal inflammation was still present in most specimens at 4 weeks after pulp capping and a significant number of samples showed incomplete and discontinuous dentine bridge formation. The results of this study suggest that initial inflammatory conditions of the pulp may risk the prognosis of teeth treated with CSCs.

A comparative histological study of the effect of TheraCal LC and biodentine on direct pulp capping in rabbits: an experimental study.

OBJECTIVES: This study histologically compared the effect of TheraCal LC and biodentine on direct pulp capping using a rabbit model. MATERIALS AND METHODS: A direct pulp capping procedure was performed on 40 mandibular central incisors of 20 healthy, male New Zealand white rabbits. TheraCal LC and biodentine were applied to exposed pulp and 10 randomly selected rabbits were euthanized after the first and second week. Incisors were extracted and prepared for histological processing and examination to check the dentine bridge thickness, continuity, and extent of pulp inflammation. A blinded data analysis was performed, and groups were compared using a Wilcoxon signed-rank test while changes across time within each group were assessed using the Mann-Whitney U test. RESULTS: When comparing the dentine bridge thickness, biodentine showed a significantly thicker dentine bridge in the first and second week (mean 28.16 µm, 33.66 µm), while TheraCal LC showed a dentine bridge in the second week only (mean 15.93 µm). Regarding dentine bridge continuity, biodentine showed a significantly better dentine bridge in the first week. Additionally, there was no difference in the second week. Furthermore, there was no statistically significant difference between each of the materials regarding the extent of inflammation. CONCLUSIONS: Biodentine in vivo showed better results concerning thickness and continuity of the dentine bridge after direct pulp capping in rabbit incisors. Both biodentine and TheraCal LC had a similar inflammatory effect on the pulp. CLINICAL RELEVANCE: Biodentine is more successful as a direct pulp capping material compared to TheraCal LC.

Multivariate prognostic analysis of direct pulp capping using a bioceramic material in mature permanent teeth with carious pulp exposure: a retrospective cohort study.

OBJECTIVES: On the basis of a large sample size and a long follow-up period, the objectives of this study were to evaluate the outcomes of direct pulp capping (DPC) in mature permanent teeth with carious pulp exposure using a kind of bioaggregate putty (BP) which commercially named iRoot BP Plus (Innovative Bioceramix, Inc., Vancouver, Canada) and to analyze the potential prognostic factors. MATERIALS AND METHODS: The design of this research was retrospective regarding treatment procedures and prospective regarding the assessment of outcomes. The preoperative diagnosis of the teeth was either normal pulp or reversible pulpitis. Results were assessed based on clinical and radiographic examinations with at least 12 months of follow-up after DPC. No symptoms or signs, a positive response to electric pulp testing, a normal response to cold pulp testing and radiographs showing no abnormalities were considered to indicate success. Kaplan-Meier survival analysis was used to calculate the cumulative survival of teeth after DPC. Univariate and multivariate Cox proportional hazard regressions were used to analyze potential prognostic factors. RESULTS: Three hundred thirty-four patients, including a total of 354 teeth, were available for the final clinical examination. The follow-up period ranged from 12 to 85 months, with an average of 27.0 ± 0.8 months. The total success rate was 85% (302/354), and the cumulative survival rates at 1, 2, 3, 4, and 5 years were 92%, 87%, 83%, 76%, and 72%, respectively. Univariate analysis indicated a significantly increased risk of failure in patients aged above 40 years and those treated by resident operators (P ≤ 0.01), with hazard ratios of 2.18 and 2.27, respectively. CONCLUSIONS: Under appropriate indication selection and treatment procedures, long-term success is possible in mature permanent teeth with carious pulp exposure by DPC using iRoot BP Plus. Patient age and operator experience are potential prognostic factors. CLINICAL RELEVANCE: Clinical data on iRoot BP Plus as a pulp capping medicament in mature permanent teeth with carious pulp exposure is lacking. This study indicated the efficacy of BP in DPC. Younger patient and sophisticated operator are beneficial for the outcome of DPC.

3D-printed microgels supplemented with dentin matrix molecules as a novel biomaterial for direct pulp capping.

OBJECTIVES: To develop a 3D-printed, microparticulate hydrogel supplemented with dentin matrix molecules (DMM) as a novel regenerative strategy for dental pulp capping. MATERIALS AND METHODS: Gelatin methacryloyl microgels (7% w/v) mixed with varying concentrations of DMM were printed using a digital light projection 3D printer and lyophilized for 2 days. The release profile of the DMM-loaded microgels was measured using a bicinchoninic acid assay. Next, dental pulp exposure defects were created in maxillary first molars of Wistar rats. The exposures were randomly capped with (1) inert material - negative control, (2) microgels, (3) microgels + DMM 500 µg/ml, (4) microgels + DMM 1000 µg/ml, (5) microgels + platelet-derived growth factor (PDGF 10 ng/ml), or (6) MTA (n = 15/group). After 4 weeks, animals were euthanized, and treated molars were harvested and then processed to evaluate hard tissue deposition, pulp tissue organization, and blood vessel density. RESULTS: All the specimens from groups treated with microgel + 500 µg/ml, microgel + 1000 µg/ml, microgel + PDGF, and MTA showed the formation of organized pulp tissue, tertiary dentin, newly formed tubular and atubular dentin, and new blood vessel formation. Dentin bridge formation was greater and pulp necrosis was less in the microgel + DMM groups compared to MTA. CONCLUSIONS: The 3D-printed photocurable microgels doped with DMM exhibited favorable cellular and inflammatory pulp responses, and significantly more tertiary dentin deposition. CLINICAL RELEVANCE: 3D-printed microgel with DMM is a promising biomaterial for dentin and dental pulp regeneration in pulp capping procedures.

Comparative evaluation of treatment outcome of partial pulpotomy using different agents in permanent teeth-a randomized controlled trial.

AIM: To compare and evaluate the clinical and radiographic performance, post-operative pain, and anti-inflammatory intake after partial pulpotomy (PP) with calcium hydroxide (CH), mineral trioxide aggregate (MTA), Biodentine (BD), and Emdogain (EMD) as pulp capping agents in mature permanent molars with definitive diagnosis of reversible pulpitis. MATERIALS AND METHODS: As part of this prospective, randomized clinical trial with four parallel arms (CTRI Registration No.: CTRI/2020/11/029329 dated 24/11/2020), hundred and ten permanent molars with a clinical diagnosis of reversible pulpitis and normal apical tissues, from patients between the ages of 15 and 45 years, were recruited and randomly assigned to four groups-CH, MTA, BD, and EMD. Operative procedure was performed under local anesthesia and dental dam isolation. After carious pulpal exposure, 2 mm of superficially inflamed coronal pulp tissue was amputated and either of the four pulp capping materials was placed. The outcome assessment was carried out at 1, 3, 6, and 12 month(s) and was categorized as success (asymptomatic patients with PAI score = 1) or failure (symptomatic patients or PAI score > 1). RESULTS: There was a significant difference in post-operative pain and anti-inflammatory medication intake after partial pulpotomy with Emdogain vis-à-vis other three capping agents. No difference in both clinical and radiographic performances was observed among the four capping agents. CONCLUSION: Partial pulpotomy when performed following evidence-based guidelines results in high success rates regardless of capping agent employed. EMD can be considered a valid and suitable pulp capping agent in PP. CLINICAL RELEVANCE: Meticulous examination and removal of superficially inflamed pulp under magnification and complete asepsis lead to successful pulpal healing regardless of capping agent employed.

Biodegradation of an injectable treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration.

BACKGROUND: A novel injectable mixture termed treated dentin matrix hydrogel (TDMH) has been introduced for restoring dentin defect in DPC. However, no study evaluated its physiological biodegradation. Therefore, the present study aimed to assess scaffold homogeneity, mechanical properties and biodegradability in vitro and in vivo and the regenerated dentin induced by TDMH as a novel pulp capping agent in human permanent teeth. METHODS: Three TDMH discs were weighted, and dry/wet ratios were calculated in four slices from each disc to evaluate homogeneity. Hydrogel discs were also analyzed in triplicate to measure the compressive strength using a universal testing machine. The in vitro degradation behavior of hydrogel in PBS at 37 °C for 2 months was also investigated by monitoring the percent weight change. Moreover, 20 intact fully erupted premolars were included for assessment of TDMH in vivo biodegradation when used as a novel injectable pulp capping agent. The capped teeth were divided into four equal groups according to extraction interval after 2-, 8-, 12- and 16-weeks, stained with hematoxylin-eosin for histological and histomorphometric evaluation. Statistical analysis was performed using F test (ANOVA) and post hoc test (p = 0.05). RESULTS: No statistical differences among hydrogel slices were detected with (p = 0.192) according to homogeneity. TDMH compression modulus was (30.45 ± 1.11 kPa). Hydrogel retained its shape well up to 4 weeks and after 8 weeks completely degraded. Histological analysis after 16 weeks showed a significant reduction in TDMH area and a simultaneous significant increase in the new dentin area. The mean values of TDMH were 58.8% ± 5.9 and 9.8% ± 3.3 at 2 and 16 weeks, while the new dentin occupied 9.5% ± 2.8 at 2 weeks and 82.9% ± 3.8 at 16 weeks. CONCLUSIONS: TDMH was homogenous and exhibited significant stability and almost completely recovered after excessive compression. TDMH generally maintained their bulk geometry throughout 7 weeks. The in vivo response to TDMH was characterized by extensive degradation of the hydrogel and dentin matrix particles and abundant formation of new dentin. The degradation rate of TDMH matched the rate of new dentin formation. TRIAL REGISTRATION: PACTR201901866476410: 30/1/2019.

Impact of corticosteroid administration on the response of exposed dental pulp to capping with bioactive cements-experimental study on mongrel dogs.

BACKGROUND: Corticosteroids are commonly used as a treatment for a variety of pathological conditions, however, systemic corticosteroid administration has adverse effects including impaired immune response and wound healing. Such complications may affect pulp healing after direct pulp capping. The current study evaluated the influence of corticosteroids on the healing ability of exposed dogs' dental pulps after direct pulp capping (DPC) with bioactive materials. METHODS: Ten healthy male dogs were assigned randomly into two groups, 5 dogs each: group I represent the control group which did not receive any medication, and group II was given corticosteroid for 45 days before DPC and till the dogs were euthanized (n = 75 teeth for each group). Following mechanical exposure, the pulps were randomly capped with either Ca(OH)2, MTA, or Biodentine. The pulpal tissues' reaction to the capping materials was evaluated 65 days postoperatively according to the following parameters: calcific bridge formation, pulpal inflammation, pulp necrosis, and bacterial infiltration. RESULTS: The corticosteroid-treated group revealed no significant difference compared to the control group concerning the pulp healing response (P > 0.05). Both Biodentine and MTA-treated specimens revealed significant differences with Ca(OH)2-treated specimens (P < 0.05) which displayed a superior positive effect of both MTA and Biodentine to Ca(OH)2 regarding all the parameters. CONCLUSIONS: Direct pulp capping technique whenever indicated in subjects treated with corticosteroid immunosuppressive drugs like prednisone performed well in aseptic conditions especially when capped with bioactive materials.

Photocrosslinkable gelatin-treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration: I. synthesis, characterizations and grafting optimization.

BACKGROUND: In recent years, treated dentin matrix (TDM) has been introduced as a bioactive hydrogel for dentin regeneration in DPC. However, no study has introduced TDM as a photocrosslinkable hydrogel with a natural photoinitiating system. Therefore, the present study aimed to explore the synthesis, characterizations and grafting optimization of injectable gelatin- glycidyl methacrylate (GMA)/TDM hydrogels as a novel photocrosslinkable pulp capping agent for dentin regeneration. METHODS: G-GMA/TDM hydrogel was photocrosslinked using a new two-component photoinitiating system composed of riboflavin as a photoinitiator under visible light and glycine as a first time coinitiator with riboflavin. The grafting reaction conditions of G-GMA/TDM e.g. GMA concentration and reaction time were optimized. The kinetic parameters e.g. grafting efficiency (GE) and grafting percentage (GP%) were calculated to optimize the grafting reaction, while yield (%) was determined to monitor the formation of the hydrogel. Moreover, G-GMA/TDM hydrogels were characterized by swelling ratio, degradation degree, and cytotoxicity. The instrumental characterizations e.g. FTIR, 1H-NMR, SEM and TGA, were investigated for verifying the grafting reaction. Statistical analysis was performed using F test (ANOVA) and Post Hoc Test (P = 0.05). RESULTS: The grafting reaction dramatically increased with an increase of both GMA concentration and reaction time. It was realized that the swelling degree and degradation rate of G-GMA/TDM hydrogels were significantly reduced by increasing the GMA concentration and prolonging the reaction time. When compared to the safe low and moderate GMA content hydrogels (0.048, 0.097 M) and shorter reaction times (6, 12, 24 h), G-GMA/TDM with high GMA contents (0.195, 0.391 M) and a prolonged reaction time (48 h) demonstrated cytotoxic effects against cells using the MTT assay. Also, the morphological surface of G-GMA/TDM freeze-dried gels was found more compacted, smooth and uniform due to the grafting process. Significant thermal stability was noticed due to the grafting reaction of G-GMA/TDM throughout the TGA results. CONCLUSIONS: G-GMA/TDM composite hydrogel formed by the riboflavin/glycine photoinitiating system is a potential bioactive and biocompatible system for in-situ crosslinking the activated-light pulp capping agent for dentin regeneration.

THREE-YEAR OUTCOME OF DIODE LASER PULPOTOMY OF PRIMARY MOLARS USING THREE PULP CAPPING AGENTS: A SPLIT-MOUTH RANDOMIZED CLINICAL TRIAL.

OBJECTIVES: Pulpotomy is the most commonly performed treatment for asymptomatic primary molars with exposed dental pulp. This study aimed to assess the clinical /radiographic success of diode laser pulpotomy with mineral trioxide aggregate (MTA), calcium hydroxide (CH), and calcium-enriched mixture (CEM) cement as pulp capping agents. METHODS: This split-mouth randomized clinical trial was conducted initially on 34 children aged 3-8 years but 4 patients left the study before the first follow-up visit and the study was accomplished and analyzed with 30 cases. The patients had at least 3 first/second molars with deep caries that in radiographic evaluation revealed that they required pulpotomy. Following pulpotomy, the pulp stump was irradiated with diode laser (noncontact mode, 632 nm, 30 mW power) as photobiomodulation mode. Pulp tissue was then capped with MTA, CH, or CEM cement (n = 30 in each group). Reinforced zinc oxide eugenol was applied over the capping agent, and the teeth were restored with stainless steel crowns. Teeth were clinically/radiographically assessed at 6, 12, 18, and 36 months, after treatment. Data were analyzed by Cochran and McNemar tests. RESULTS: All 30 patients showed up for clinical/radiographic follow-ups for up to 36 months. Regarding clinical outcomes, the 6-, 12-, 18-, and 36-month success rates of all experimental groups were nearly similar with no significant difference (p > .05). Regarding radiographic outcomes, the 6-month success rates were similar among the groups (p > .05); however, the 12-, 18-, and 36-month outcomes of CEM and MTA groups were similar but significantly superior to that of CH group (p < .05). CONCLUSION: Diode laser irradiation and subsequent capping of pulp tissue with MTA or CEM cement can be employed for pulpotomy of primary molars.

Human three-dimensional dental pulp organoid model for toxicity screening of dental materials on dental pulp cells and tissue.

AIM: To establish a 3D model for screening the biocompatibility of dental materials/drugs on dental pulp cells and tissue. METHODOLOGY: Human dental pulp cells (hDPC) and endothelial cells (EC) were mixed with or without human dental pulp derived extracellular matrix (hDP-ECM) according to several protocols and cultured in 3D plates to fabricate 3D organoids. Cell viability and proliferation in organoids were evaluated using Live/Dead cell viability assay and ATPase assay. Organoids were fixed, cut and stained with a H&E staining kit. The expressions of DSPP, DMP-1, CD31, vWF and COL1A in 3D organoids were evaluated using immunofluorescence. To assess the feasibility of 3D organoids on drug/material toxicity screening, the organoids were treated with lipopolysaccharides (LPS) or iRoot BP. Then, cell viability and apoptosis were assessed. The expressions of IL-6, TNF-α, and IL-1ß were compared in LPS-treated and non-treated organoids. Alizarin Red S staining was used to evaluate calcium deposit formation in organoids. Data were analysed using one-way anova followed by Tukey's post hoc comparison. RESULTS: The 3D spheres/organoids were formed at day 1 or day 2. Cells in 3D organoids maintained a high viability rate and low proliferation activity. The level of CD31 increased significantly (p < .05) when EC were added to coculture with hDPC. The expressions of odontogenesis-associated proteins (DSPP, COL1A) upregulated (p < .05) with the addition of hDP-ECM. Level of IL-6 expression and rates of dead and apoptotic cells in 3D organoids were increased significantly (p < .05) in response to LPS. Calcium deposit formation was observed in iRoot BP-treated organoids. CONCLUSIONS: Coculture of hDPC and EC in the presence of hDP-ECM formed functional dental pulp organoids. The experimental model provides an alternative tool for toxicity screening of dental pulp capping agents and dental pulp regeneration research.

[Pulpotomy of human primary molars with novel bioceramic material].

OBJECTIVE: To evaluate the efficacy of iRoot BP Plus, a novel bioceramic material, and mineral trioxide aggregate (MTA) by comparing the clinical and radiographic results of pulpotomy in human primary molars, and to find out the influence factor. METHODS: Children who had at least one primary molar diagnosed as pulpitis, and received pulpotomy in the Department of Pediatric Dentistry, Peking University School and Hospital of Stomatology from January, 2017 to December, 2018 were searched by the selection criteria in the Electronic Medical Record Database of Peking University School and Hospital of Stomatology. The molars with the pulp capping agents were iRoot BP Plus or MTA were included, and the molars with other pulp capping agents were excluded. Molars using iRoot BP Plus were selected into the experimental group (iRoot BP Plus group). Molars using MTA were selected into the control group (MTA group) using propensity score matching model (1 ∶ 1), considering the gender, age, tooth position, the title of clinician, pulp status, restoration and length of follow-up as the potential influence factor. Basic information, the relevant medical records including symptoms, clinical and radiographic examination before and after operation, intraoperative information and follow up examination records were collected. The success rates were compared and the influence factors were analyzed respectively. RESULTS: The study included 132 children, 178 molars (89 molars from each group) and the mean follow-up time was (462±99) days by December, 2019. In the iRoot BP Plus group, 9 molars failed whilst 6 molars failed in MTA group. The success rate was 89.9% and 93.3%, respectively, showing no significant difference between the two groups. Through Cox proportional risk model analysis, the success rate of iRoot BP Plus was significantly lower when the pulp status was poor, while other factors including age, tooth position, title of clinician and restoration were not found to be associated with the clinical outcome. CONCLUSION: Pulpotomy of human primary molars with iRoot BP Plus has the same effectiveness with MTA. The pulp status is the main factor that influences the outcome of iRoot BP Plus. Further studies with larger sample sizes and longer follow-up terms are needed.

Comparative Evaluation of Ozonoid Olive Oil and Calcium Hydroxide as an Indirect Pulp Capping Agent in Primary Mandibular Second Molar: A Randomized Controlled Trial.

AIM: The aim of this study was to evaluate clinical and radiographical success of ozonoid olive oil as an indirect pulp capping (IPC) agent in primary mandibular second molar when compared to calcium hydroxide and to evaluate the antimicrobial efficacy of ozonoid olive oil on Streptococcus mutans and Lactobacilli. MATERIALS AND METHODS: A split-mouth randomized controlled trial was conducted on 30 primary mandibular second molars in 15 children of age 5-9 years with deep dentinal carious lesion. Teeth were randomly allocated to two groups of 15 each. After achieving local anesthesia and rubber dam isolation, an IPC procedure was performed using ozonoid olive oil in group I and calcium hydroxide in group II. Teeth were evaluated clinically and radiographically at 6 and 12 months of follow-up for success or failure of IPC. The bacterial counts of S. mutans and Lactobacilli were measured before and after application of ozonoid olive oil for 60 seconds on dentinal tissue in group I and recorded as colony-forming units per mL (CFU/mL). RESULTS: There were no statistically significant differences found between the materials used for IPC (p >0.05). About 93.33% and 100% clinical and radiographical success rates were seen in group I and group II, respectively. Statistically significant differences were observed for bacterial reduction after the application of ozonoid olive oil (p <0.05) for both the microorganisms. CONCLUSION: The results of this study showed that the success of IPC is independent of capping material. Ozonoid olive oil, an antimicrobial agent, can also be used for IPC. The success of the IPC procedure depends on a reduction in the bacterial count and sealing of the tooth with hermetic restoration. More clinical studies with a larger sample size and longer follow-up duration are required for understanding the efficacy of this material. CLINICAL SIGNIFICANCE: Ozonoid olive oil can be used as an IPC agent in primary molars and also for a bacterial reduction in dentinal caries.