Intraoperative live measurement of femoral head size for acetabular cup sizing: simple, accurate, and green!

PURPOSE: Templating is the first step in achieving a successful total hip arthroplasty. We hypothesize that native head size is highly correlated with implanted cup size. Therefore, the purpose of this study is to look for a correlation between sizes of the intra-operative measurement of the femoral head and the implanted cup. METHODS: This is a monocentric observational study conducted from December 2018 till January 2023. All patients admitted for a primary total hip arthroplasty were included and retrospectively reviewed. Intra-operative femoral head measurement, radiographic femoral head diameter, templated (planned) cup size, and definitive implanted cup size were recorded. RESULTS: The sample included 154 patients (85 female and 69 males) with a mean age of 66.2 ± 10.4 years. There were 157 THA cases; 82 on the right side and 75 on the left side. The native head size and acetate template on digital radiographs were the most significantly positively correlated with cup size (P < 0.0001) while the radiological head size was significantly negatively correlated with cup size (P = 0.009). The implanted cup was on average 2 ± 2 mm bigger than the native head size measured intra-operatively. CONCLUSION: The native femoral head diameter measured intra-operatively is a simple and reliable tool to help the surgeons choose the proper size of the acetabular cup, preventing complications during surgery hence optimizing results post operatively. This technique would contribute to a more ecofriendly orthopaedic reconstructive surgery.

Evolution of posture in amniotes-Diving into the trabecular architecture of the femoral head.

Extant amniotes show remarkable postural diversity. Broadly speaking, limbs with erect (strongly adducted, more vertically oriented) posture are found in mammals that are particularly heavy (graviportal) or show good running skills (cursorial), while crouched (highly flexed) limbs are found in taxa with more generalized locomotion. In Reptilia, crocodylians have a "semi-erect" (somewhat adducted) posture, birds have more crouched limbs and lepidosaurs have sprawling (well-abducted) limbs. Both synapsids and reptiles underwent a postural transition from sprawling to more erect limbs during the Mesozoic Era. In Reptilia, this postural change is prominent among archosauriforms in the Triassic Period. However, limb posture in many key Triassic taxa remains poorly known. In Synapsida, the chronology of this transition is less clear, and competing hypotheses exist. On land, the limb bones are subject to various stresses related to body support that partly shape their external and internal morphology. Indeed, bone trabeculae (lattice-like bony struts that form the spongy bone tissue) tend to orient themselves along lines of force. Here, we study the link between femoral posture and the femoral trabecular architecture using phylogenetic generalized least squares. We show that microanatomical parameters measured on bone cubes extracted from the femoral head of a sample of amniote femora depend strongly on body mass, but not on femoral posture or lifestyle. We reconstruct ancestral states of femoral posture and various microanatomical parameters to study the "sprawling-to-erect" transition in reptiles and synapsids, and obtain conflicting results. We tentatively infer femoral posture in several hypothetical ancestors using phylogenetic flexible discriminant analysis from maximum likelihood estimates of the microanatomical parameters. In general, the trabecular network of the femoral head is not a good indicator of femoral posture. However, ancestral state reconstruction methods hold great promise for advancing our understanding of the evolution of posture in amniotes.

Establishing reference values for the pubofemoral distance in normal infant medial hips by ultrasound.

BACKGROUND: Measuring the pubofemoral distance (PFD) is important for evaluating the effectiveness of hip reduction in the treatment of developmental dysplasia of the hip (DDH). However, reference PFD values have not been established in normal infants. PURPOSE: To investigate variations in PFD values measured in normal infant medial hips stratified by age, laterality, and gender. MATERIAL AND METHODS: A total of 240 infants diagnosed with Graf type Ia and/or Graf type Ib hips by ultrasonography were stratified into eight age groups: 0-1 month; 1-2 months; 2-3 months; 3-4 months; 4-5 months; 5-6 months; 6-7 months; and 7-12 months. The bilateral medial hips were scanned with transinguinal ultrasound. The PFD was defined as the distance between the lateral edge of the superior ramus of pubic bone and the medial edge of the femoral head. Inter-observer reproducibility was assessed. RESULTS: Among the 240 infants, there were 371 Graf type Ia hips and 109 Graf type Ib hips. Mean ± SD bilateral PFD values of eight groups were measured separately. There were no significant differences in mean PFD values for left or right hips (t = 0.946, P = 0.345) or mean bilateral PFD values in male and female infants (t = 1.445, P = 0.149). Mean PFD values increased linearly with age (left: r = 0.680, P < 0.0001; right: r = 0.682, P < 0.0001). Inter-observer reproducibility was excellent. CONCLUSION: This study established reference PFD values from the medial hip in infants aged 0-12 months. PFD values increased with age, but were not significantly influenced by laterality or gender. These data provide detailed information that can support follow-up of infants treated for DDH.

Morphological consistency of bilateral hip joints in adults based on the X-ray and CT data.

PURPOSE: The application of the anatomical parameters of the contralateral hip joint to guide the preoperative template of the affected side relies on the bilateral hip symmetry. We investigated the bilateral hip symmetry and range of anatomical variations by measurement and comparison of bilateral hip anatomical parameters. METHODS: This study included 224 patients (448 hips) who were diagnosed with osteoarthritis (OA) and avascular necrosis (AVN) of the femur head, and underwent bilateral primary total hip arthroplasty (THA) in our hospital from January 2012 to August 2020. Imaging data included 224 patients X-ray and 30 CT data at the end of the cohort. Anatomical parameters, including the acetabular abduction angle and trochanteric height, were measured using the Noble method. Postoperative measurements included stem size, difference of leg length and offset. RESULTS: Except for the isthmus width, there were no significant differences in the anatomical morphology of the hip joint. Among the demographic factors, there was a correlation between body weight and NSA. Among various anatomical parameters, a correlation was present between medullary cavity widths of T + 20, T, and T - 20. The difference in the use of stem size is not due to the morphological difference of bilateral medullary cavity, but due to the different of 1- or 2-stage surgery. CONCLUSION: Bilateral symmetry was present among the patients with normal morphology of the hip medullary cavity, theoretically confirming the feasibility of structural reconstruction of the hip joint using the hip joint on the uninjured side. Additionally, the difference in the morphology of the hip medullary cavity is not present in a single plane but is synergistically affected by multiple adjacent planes.

Differences between race and sex in measures of hip morphology: a population-based comparative study.

OBJECTIVE: This paper aims to (i) identify differences in measures of hip morphology between four racial groups using anteroposterior (AP) hip x-rays, and (ii) examine whether these differences vary by sex. METHODS: 912 hip x-rays (456 individuals) from four racial groups (European Caucasians, American Caucasians, African Americans and Chinese) were obtained. Males and females (45-75 years) with no radiographic hip OA (Kellgren and Lawrence < Grade 2 or Croft < Grade 1) were included. Eleven features of hip joint morphology were analysed. Linear regression with generalised estimating equations (GEE) was used to determine race and sex differences in hip morphology. Post-hoc Bonferroni procedure was used to adjust for multiple comparisons. RESULTS: The final analysis included 875 hips. Chinese hips showed significant differences for the majority of measures to other racial groups. Chinese were characterised by more shallow and narrow acetabular sockets, reduced femoral head coverage, smaller femoral head diameter, and a lesser angle of alignment between the femoral neck and shaft. Variation was found between other racial groups, but with few statistically significant differences. The average of lateral centre edge angle, minimum neck width and neck length differed between race and sex (p-value for interaction < 0.05). CONCLUSIONS: Significant differences were found in measures of morphology between Chinese hips compared to African Americans or Caucasian groups; these may explain variation in hip OA prevalence rates between these groups and the lower rate of hip OA in Chinese. Sex differences were also identified, which may further explain male-female prevalence differences for OA.

The morphometry, localization, and shape types of the fovea capitis femoris, and their relationship with the femoral head parameters.

PURPOSE: The aim of this study was to investigate the morphometric properties of the fovea capitis femoris (FCF) and its localization on the femoral head, the shape types, and the relationship with the femoral head parameters. METHODS: This study was performed on 146 dry femora. The morphological and morphometric properties were evaluated on dry bones and digital images of these bones. Some of the FCF and femoral head parameters were measured with a caliper on dry bones while others were measured using ImageJ software on digital images. RESULTS: The most common localization type was the Type 2 localization and the shape type was the oval type. The FCF sizes [except depth of the FCF (DFCF)] were found to be smaller in the Type 1 localization. The femoral neck shaft angle (NSA) was found to be greater in the triangular type than the round (or circular) type on the left side and in all cases. The vertical diameter of the femoral head (FHD-V), the anteroposterior diameter of the femoral head (FHD-AP), and the area of the femoral head (AREAHOF) values were greater in the triangular types than in the oval types in all cases. There was no relationship between the localization types and the shape types of the FCF. CONCLUSION: Results showed that the morphometric properties, localization, and shape types of the FCF were related to some femoral head parameters. It is thought that our findings contributed to orthopedic and radiological applications and anthropological sciences.

The neck-shaft angle: an update on reference values and associated factors.

Background and purpose - The neck-shaft angle (NSA) is valuable for diagnostics and therapy of the hip, but current reference values derive mostly from studies on anatomic specimens, small cohorts, or are hospital-based. Moreover, associated factors such as age, sex, or anthropometric data have rarely been considered. Therefore, we determined associated factors for NSA and reassessed the historical reference values in a general adult population.Methods - NSAs on both sides of 3,226 volunteers from the population-based Study of Health in Pomerania (SHIP) were measured with MRI. SHIP drew a representative sample of the population of Pomerania (northeastern Germany). NSAs were compared with sex, age, and anthropometric data by bivariable linear regression models. Reference values were assessed by quantile regressions for 2.5th and 97.5th percentiles.Results - The mean NSA was 127° (SD 7), while men had a lower NSA than women (95% confidence interval [CI] 0.4°-1.4°). The reference range was 114°-140°. Age was inversely associated with NSA (CI -0.2 to -0.1). Body height was positively associated with the NSA, while BMI and waist circumference showed a negative association. There was no association between body weight and NSA.Interpretation - The historical lower limit of 120° might be too high, so the radiological prevalence of hip pathology might have been overestimated. The previously reported influence of age, sex, and body height on the NSA has been confirmed.

Estimation of Femoral Head Size from Palpable Bony Prominences of the Femur.

BACKGROUND: Proximal femoral surgeries involving femoral head replacement are common procedures worldwide. In these patients, the femoral heads are replaced with femoral head prosthetic implants. Pre-operative planning to determine the likely size of the prosthetic implant is important. Estimation from radiographs is the commonest method being used but this is fraught with problems. This study, therefore, developed an alternative method that can be used to estimate the femoral head size prior to hemiarthroplasty. MATERIALS AND METHODS: This was a prospective descriptive study that involved measurements of parts of femoral bone. Forty-eight adult femoral bones were measured. Measurements taken were the femoral head size (FH), the femoral bone maximum length (ML), the trochanteric length of the femur (TL), and the distal femoral breadth (DFB) of the femur. All measurements obtained were recorded and were analyzed using STATA version 13 (StataCorp, Texas, USA). RESULTS: The maximum length of the femora ranged from 42.1 cm to 51.5 cm. The trochanteric length ranged from 39 cm to 48.3 cm. The distal femoral breadth ranged from 53.8 mm to 92.3 mm. The femoral head size ranged from 39 mm to 55 mm with a mean value of 46.6 ± 2.9 mm. An equation was generated using the trochanteric length. Femoral head size = 16 + 0.7(trochanteric length in centimeter) ± 5 mm. This will provide a range of possible femoral head prostheses that should be made available for the surgery. CONCLUSION: This study generated an alternate method to be used during the pre-operative planning of a femoral head replacement surgery. It provides the possible range of prosthetic implants sizes to be made available for such surgeries. The trochanteric length can be easily measured. The method described will be of great benefit in middle and low income countries where prosthetic implants are not usually stocked within the hospital.

Trabecular architecture of the great ape and human femoral head.

Studies of femoral trabecular structure have shown that the orientation and volume of bone are associated with variation in loading and could be informative about individual joint positioning during locomotion. In this study, we analyse for the first time trabecular bone patterns throughout the femoral head using a whole-epiphysis approach to investigate how potential trabecular variation in humans and great apes relates to differences in locomotor modes. Trabecular architecture was analysed using microCT scans of Pan troglodytes (n = 20), Gorilla gorilla (n = 14), Pongo sp. (n = 5) and Homo sapiens (n = 12) in medtool 4.1. Our results revealed differences in bone volume fraction (BV/TV) distribution patterns, as well as overall trabecular parameters of the femoral head between great apes and humans. Pan and Gorilla showed two regions of high BV/TV in the femoral head, consistent with hip posture and loading during two discrete locomotor modes: knuckle-walking and climbing. Most Pongo specimens also displayed two regions of high BV/TV, but these regions were less discrete and there was more variability across the sample. In contrast, Homo showed only one main region of high BV/TV in the femoral head and had the lowest BV/TV, as well as the most anisotropic trabeculae. The Homo trabecular structure is consistent with stereotypical loading with a more extended hip compared with great apes, which is characteristic of modern human bipedalism. Our results suggest that holistic evaluations of femoral head trabecular architecture can reveal previously undetected patterns linked to locomotor behaviour in extant apes and can provide further insight into hip joint loading in fossil hominins and other primates.

Pincer-type MRI morphology seen in over a third of asymptomatic healthy volunteers without femoroacetabular impingement.

BACKGROUND: In daily routine, pincer femoroacetabular impingement (FAI) findings are often seen without a clinical diagnosis of pincer FAI. PURPOSE: To assess the presence of pincer FAI MRI findings in asymptomatic volunteers with negative impingement test versus patients with clinically confirmed FAI. STUDY TYPE: Case-control study. POPULATION: Sixty-three asymptomatic volunteers and 63 matched patients with FAI were included. FIELD STRENGTH/ SEQUENCE: A coronal T1 -weighted turbo spin-echo sequence as well as a 3D oblique transverse water-excitation true fast imaging sequence at 1.5T. ASSESSMENT: The volunteers underwent standard MRI of the hip, and patients underwent MR arthrography of the symptomatic hip using the same MR sequences. Measurements of cranial acetabular version, acetabular depth, and lateral center-edge angle were performed independently by three fellowship-trained musculoskeletal radiologists. STATISTICAL TESTS: Descriptive statistics, Mann-Whitney U-test, Unpaired t-test, receiver operating characteristics (ROC), Intraclass correlation coefficient (ICC). RESULTS: Forty-one percent (26/63, reader 1), 32% and 37% (20 and 23/63, reader 2/3) of asymptomatic volunteers had at least one positive MR finding for pincer-FAI. Patients with pincer or mixed-type FAI had cranial retroversion of the acetabulum of -0.2° ± 7.1 (mean ± standard deviation) for reader 1 and -0.3° ± 5.5/-0.2° ± 4.8 for reader 2 / reader 3, while asymptomatic volunteers had an anteversion of 6.2° ± 6.4 (reader 1) and 3.2° ± 4.9/3.1° ± 6.5 (readers 2/3): This difference was statistically significant (P ≤ 0.002), but there was a large overlap between the groups. Acetabular depth measurements were very similar for patients with either pincer or mixed-type FAI (5.1-5.3 mm ± 3.1) and volunteers (5.2-6.1 mm ± 2.6), without a statistically significant difference (P ≤ 0.50). Lateral center-edge angle was also similar in patients with either pincer or mixed-type FAI (32.1-35.1° ± 9.1) and volunteers (30.7-33.2° ± 6.5), without a statistically significant difference (P ≤ 0.28). DATA CONCLUSION: There is a large overlap in pincer-type MRI findings between patients with symptomatic FAI and asymptomatic volunteers. More than a third of volunteers exhibited at least one positive pincer-type MRI finding. LEVEL OF EVIDENCE: 1 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019;49:1296-1303.

Complex variation of trabecular bone structure in the proximal humerus and femur of five modern human populations.

OBJECTIVE: This project investigates trabecular bone structural variation in the proximal humerus and femur of hunter-gatherer, mixed-strategy agricultural, medieval, and human groups to address three questions: (a) What is the extent of trabecular bone structural variation in the humerus and femur between populations with different inferred activity levels? (b) How does variation in the proximal humerus relate to variation in the proximal femur? (c) Are trabecular bone microstructural variables sexually dimorphic? METHODS: The proximal humerus and femur of 73 adults from five human groups with distinct subsistence strategies were scanned using a micro-computed tomography system. Centralized volumes of interest within the humeral and femoral heads were extracted and analyzed to quantify bone volume fraction, trabecular thickness, trabecular separation, connectivity density, degree of anisotropy, and bone surface density. RESULTS: In the humerus and femur, groups with the highest inferred activity levels have higher bone volume fraction and trabecular thickness, and lower bone surface density than those with lower inferred activity levels. However, the humeral pattern does not exactly mirror that of the femur, which demonstrates a steeper gradient of difference between subsistence groups. No significant differences were identified in trabecular separation. No consistent patterns of sexual dimorphism were present in the humerus or femur. CONCLUSIONS: Reduced skeletal robusticity of proximal humeral and femoral trabecular bone corresponds with reduced activity level inferred from subsistence strategy. However, human trabecular bone structural variation is complex and future work should explore how other factors (diet, climate, genetics, disease load, etc.), in addition to activity, influence bone structural variation.

The risk of revision after total hip arthroplasty in young patients depends on surgical approach, femoral head size and bearing type; an analysis of 19,682 operations in the Dutch arthroplasty register.

BACKGROUND: Total hip arthroplasty (THA) is used increasingly in younger patients. There is little knowledge about the effect of THA characteristics on risk of revision, especially in young patients. Therefore, we studied the influence of both patient-related and surgical factors on the risk of revision using data from the Dutch Arthroplasty Registry (LROI). METHODS: All patients younger than 55 years with a primary THA implanted in the Netherlands between 2007 and 2017 were selected (n = 19,682). The covariates age, sex, primary diagnosis, ASA-classification, surgical approach, fixation method, bearing type, head size and year of surgery were entered into Cox proportional hazards models to calculate hazard ratios for the risk of revision. RESULTS: The overall 5-year survival of primary THA was 95.3% (95% CI, 94.9-95.6). Use of the anterior approach resulted in a lower risk of revision than the use of the posterolateral approach (HR: 0.66, 95% CI: 0.47-0.92). THAs with a head diameter ≥ 38 mm had a higher risk of revision (HR: 1.90, 95% CI: 1.33-2.72) than THAs with 32 mm heads. Use of MoM bearings resulted in an increased risk when compared to C-PE (HR: 1.76, 95% CI: 1.27-2.43). CONCLUSION: The risk of revision in patients younger than 55 years depends on surgical approach, head size and bearing type. The anterior approach resulted in a decreased risk of revision, whereas use of ≥38 mm heads and MoM bearings resulted in an increased risk of revision for any reason.

Does the Femoral Head Size in Hip Arthroplasty Influence Lower Body Movements during Squats, Gait and Stair Walking? A Clinical Pilot Study Based on Wearable Motion Sensors.

A hip prosthesis design with larger femoral head size may improve functional outcomes compared to the conventional total hip arthroplasty (THA) design. Our aim was to compare the range of motion (RoM) in lower body joints during squats, gait and stair walking using a wearable movement analysis system based on inertial measurement units (IMUs) in three age-matched male groups: 6 males with a conventional THA (THAC), 9 with a large femoral head (LFH) design, and 8 hip- and knee-asymptomatic controls (CTRL). We hypothesized that the LFH design would allow a greater hip RoM, providing movement patterns more like CTRL, and a larger side difference in hip RoM in THAC when compared to LFH and controls. IMUs were attached to the pelvis, thighs and shanks during five trials of squats, gait, and stair ascending/descending performed at self-selected speed. THAC and LFH participants completed the Hip dysfunction and Osteoarthritis Outcome Score (HOOS). The results showed a larger hip RoM during squats in LFH compared to THAC. Side differences in LFH and THAC groups (operated vs. non-operated side) indicated that movement function was not fully recovered in either group, further corroborated by non-maximal mean HOOS scores (LFH: 83 ± 13, THAC: 84 ± 19 groups, vs. normal function 100). The IMU system may have the potential to enhance clinical movement evaluations as an adjunct to clinical scales.

Clinical Anatomy of the Ligament of the Head of Femur.

The ligament of the head of femur (LHF) has gained clinical attention recently and is reported to contribute to hip stability. This study explores its morphology and morphometry, information that may help inform surgical decision making. Gross anatomical dissections were undertaken on 229 embalmed hips from European (n = 105) and Thai (n = 124) adult cadavers to examine LHF anatomy. Ligament morphometry was statistically compared at different sites, between sexes and sides. The origin of ligamental arteries and absence of the ligament were documented. The LHF was pyramidal or quadrangular in shape. Sub-synovial fibrous bands originated from the transverse acetabular ligament, edges of the acetabular notch, and acetabular floor; less frequently from the hip joint capsule. Distally, the ligament flattened and converged onto the fovea capitis. The ligament was 22.3 ± 4.4 mm long and was significantly wider (P = 0.001) and thicker (P = 0.0003) at the fovea, compared to its mid-zone. Branches of the obturator artery entered the acetabular foramen inferomedially and penetrated the middle third of the LHF. Blood vessels ran within the LHF and appeared to enter the fovea. The ligament was absent in 2.8% of Thai hips and there were no significant sex or side differences in ligament dimensions. The morphology of the LHF is complex. While individual variation was apparent, blood vessels were seen in the distal ligament. Precise information on LHF morphometry and attachment sites will help inform appropriate graft dimensions and choice of fixation sites necessary for ligament reconstruction. Clin. Anat., 2018. © 2018 Wiley Periodicals, Inc. Clin. Anat., 2018. © 2018 Wiley Periodicals, Inc.

The position and morphometry of the fovea capitis femoris in computed tomography of the hip.

PURPOSE: The position of the fovea of the femoral head is usually considered to be inferior or inferoposterior, despite the fact that few detailed anatomical studies have been performed. This study was performed to assess the position of the fovea in computed tomography and its correlation with standard radiographic measures of the proximal femur. METHODS: Computed tomography scans of the hip of 107 patients (54 women and 53 men) were evaluated. The semi-coronal and transverse views were used to assess the femoral neck-shaft angle and the neck version, as well as the size and position of the fovea in relation with the femoral neck axis and the size of the head. RESULTS: The fovea was always located inferior to the neck axis in the semi-coronal plane. In the transverse plane, the fovea was always slightly posterior to the femoral neck axis, as approximately ¾ of its diameter was posterior to the axis. The position was unrelated to the neck-shaft axis and the neck-trochanter minor angle. There were no differences in the position between men and women; however, in women, the fovea is slightly larger than in men when related to the femoral head size. CONCLUSION: The femoral neck axis in the transverse plane always crosses the anterior aspect of the fovea. Its position is unrelated to the angular geometry of the proximal femur, but related to the femoral head size. It is found to be relatively larger in women.

Anatomical study based on 3D-CT image reconstruction of the hip rotation center and femoral offset in a Chinese population: preoperative implications in total hip arthroplasty.

BACKGROUND: Several anatomical studies regarding the value of hip rotation center (HRC) and femoral offset (FO) have been performed in Western populations. However, there are a few data on hip morphological values in the Chinese population based on CT scans. This study measured the values of the hip and pelvis, especially HRC and FO, in a Chinese population and compared them with the published values obtained from Western populations. PATIENTS AND METHODS: One hundred patients (50 females and 50 males) were included in the present study, and 3D-CT reconstructions of the hip and pelvis were generated. The mean age was 51.4 ± 8.9 years and mean body mass index (BMI) was 23.5 ± 2.6 kg/m2. All the morphologic measurements were compared between genders and sides, and the relationships between different parameters were analyzed. RESULTS: The mean FO values were 38.4 ± 4.7 mm and 35.6 ± 4.4 mm for the males and females, respectively. A significant negative correlation was noted between FO and neck shaft angle (NSA) in both genders (r = - 0.262, P = 0.009 for the males, r = - 0.350, P ≤ 0.001 for the females). A significant positive correlation was found between horizontal distance (HD) and diameter of the femoral head (DFH) in both genders (r = 0.734, P ≤ 0.001 for the males, r = 0.658, P ≤ 0.001 for the females). A significant positive correlation was noted between HD and pelvic width (PW) in males (r = 0.455, P ≤ 0.001). A significant positive correlation was also noted between HD and pelvic height (PH) in males (r = 0.318, P ≤ 0.001). A significant positive correlation was observed between FO and pelvic cavity height (PCH) in males (r = 0.411, P ≤ 0.001), and a significant positive correlation was observed between VD and PCH in females (r = 0.497, P ≤ 0.001). The tip of the greater trochanter was, on average, 7.0 mm higher than the femoral head center. Relationships between DFH and pelvic morphometric parameters were also observed. CONCLUSION: The present morphological data and the relationships between them can be applied to design better ethnic-specific THA prostheses and preoperative plans.

Does oversizing an uncemented cup increase post-operative pain in primary total hip arthroplasty?

INTRODUCTION: It has been suggested that one of the factors related to persistent post-operative pain following total hip arthroplasty (THA) is to over sizing of the acetabular component. In order to investigate this potential issue, we retrospectively analysed a series of consecutive uncemented THA. We assessed the incidence of persistent post-operative pain and the size difference between the implanted acetabular component and the native femoral head. METHODS: A total of 265 consecutive THAs were retrospectively identified. Standardised pre-operative radiographs were analysed using validated techniques to determine the native femoral head diameter. Post-operative standardised radiographs were reviewed and the acetabular orientation determined. Patients were sent postal questionnaires regarding their outcome and level of pain. RESULTS: Questionnaires were returned by 169 patients (189 hips, 71% response rate). A total of 17 were excluded due to inadequate radiographs., leaving 172 THA in the study group. The mean native femoral head (NFH) size was 47 mm. The most common implanted acetabular component size was 52 mm. The mean difference in cup to NFH diameter (delta) was 5.7 mm (range - 6.1 to 15.4 mm; 95% CI 5.3-6.2 mm). A delta of > 6 mm was found to be significant for predicting persistent post-operative pain (RR = 1.81; 95% CI 1.1-3.1; P = 0.027). CONCLUSION: Our study confirms that a delta of > 6 mm is associated with an increased risk of persistent post-operative pain following THA. We recommend pre-operative templating in all uncemented THA to ensure the planned acetabular component is no more than 6 mm larger than the NFH diameter.

Systemic patterns of trabecular bone across the human and chimpanzee skeleton.

Aspects of trabecular bone architecture are thought to reflect regional loading of the skeleton, and thus differ between primate taxa with different locomotor and postural modes. However, there are several systemic factors that affect bone structure that could contribute to, or be the primary factor determining, interspecific differences in bone structure. These systemic factors include differences in genetic regulation, sensitivity to loading, hormone levels, diet, and activity levels. Improved understanding of inter-/intraspecific variability, and variability across the skeleton of an individual, is required to interpret properly potential functional signals present within trabecular structure. Using a whole-region method of analysis, we investigated trabecular structure throughout the skeleton of humans and chimpanzees. Trabecular bone volume fraction (BV/TV), degree of anisotropy (DA) and trabecular thickness (Tb.Th) were quantified from high resolution micro-computed tomographic scans of the humeral and femoral head, third metacarpal and third metatarsal head, distal tibia, talus and first thoracic vertebra. We found that BV/TV is, in most anatomical sites, significantly higher in chimpanzees than in humans, suggesting a systemic difference in trabecular structure unrelated to local loading regime. Differences in BV/TV between the forelimb and hindlimb did not clearly reflect differences in locomotor loading in the study taxa. There were no clear systemic differences between the taxa in DA and, as such, this parameter might reflect function and relate to differences in joint loading. This systemic approach reveals both the pattern of variability across the skeleton and between taxa, and helps identify those features of trabecular structure that may relate to joint function.

Fretting and Corrosion Damage in Retrieved Metal-on-Polyethylene Modular Total Hip Arthroplasty Systems: What Is the Importance of Femoral Head Size?

BACKGROUND: Fretting and corrosion at the modular femoral head-femoral neck (taper) interface have been reported in retrieved total hip arthroplasty (THA) prostheses. This study investigated associations among implant design, radiographic factors, and patient factors with corrosion and fretting at the taper interface in retrieved metal-on-polyethylene modular THA prostheses. METHODS: Ninety-two retrieved primary metal-on-polyethylene THA implants were evaluated and graded for fretting, corrosion, and damage at the taper interface, including the femoral stem trunnion and femoral head. Preoperative radiographs were assessed for osteolysis and femoral stem alignment; and medical records were reviewed for demographic data. RESULTS: Male patients had greater head corrosion (P = .037), patient age at revision had a weak, negative correlation with trunnion corrosion (ρ = -0.20, P = .04), and both body mass index and duration of implantation had weak, positive correlations with head fretting (ρ = 0.26, P = .01 and ρ = 0.33, P = .001, respectively). A weak, negative correlation was found between femoral head size and both head fretting and head corrosion (ρ = -0.26, P = .007 and ρ = -0.21, P = .028, respectively), and a weak, positive correlation was found between head offset and trunnion fretting (ρ = 0.23, P = .030). Varus femoral stem alignment was associated with greater head fretting (P = .038). CONCLUSION: Larger femoral head sizes were correlated with less severe head corrosion and head fretting, with 28-mm heads exhibiting more moderate-to-severe damage. Other factors, such as head-taper engagement and geometry, rather than head size, may affect rates of corrosion and fretting damage at the taper interface.