Effect of 3D printed replicas on the duration of third molar autotransplantation surgery: A controlled clinical trial.

BACKGROUND/AIM: This study aimed to develop a protocol that combines cone-beam computed tomography (CBCT), software, and 3D printing to design 3D replicas for tooth autotransplantation. The goal was to evaluate the impact of this approach on the extraoral time of the donor teeth and the total surgical time, thereby enhancing surgical efficiency and outcomes. MATERIALS AND METHODS: A non-randomized trial (protocol 10.1186/ISRCTN13563091) was conducted at Riga Stradins University, enrolling 46 patients (13-22 years old) who required molar extraction and possessed a non-erupted third molar. The patients were sequentially assigned to a 3D replica group (24 patients) or a control group (22 patients). The primary outcome measured was the extra-alveolar time of the donor tooth, and the secondary outcome was the total duration of surgery. Both were assessed using a sample size capable of detecting a 10-min difference. A generalized linear model adjusted for various factors was used to test for significant time differences (p < .05) between the groups. RESULTS: Forty-six patients were included in this analysis. The effect of using 3D replicas was not statistically significant and was associated with a decrease in the extraoral time of the donor tooth in seconds (ß = -9.35, 95% CI [-40.86, 22.16]). For the total surgical time in minutes, the use of 3D replicas had a statistically significant impact, reducing the operation duration in minutes (ß = -13.42, 95% CI [-24.50, -2.34]). No early complications were observed in either group, with all teeth present at 3-4 weeks post-surgery. CONCLUSIONS: The integration of 3D printing technology can enhance the efficiency of autotransplantation surgeries, primarily by reducing surgical time.

New complementary alternatives in third molar autotransplantation: A systematic review.

BACKGROUND: Dental autotransplantation (DAT) is defined as the replacement or direct transfer of an impacted, semi-impacted or erupted tooth to a donor site, either to a post-extraction socket or to a surgically created socket within the same individual. The use of new technological advances, such as 3-D dental models based on computer-aided design, among others, have been reported to improve the success rate of DAT. Therefore, we aimed to perform a systematic review to explore the possible benefits that the use of these innovative techniques can provide when applied to DAT. MATERIAL AND METHODS: The literature search was conducted in PubMed, Scopus, and Web of Science databases following the PRISMA guidelines. The research question was: "Are computerized technological advancements a useful tool for improving the success of third molar autotransplantation technique? RESULTS: The initial literature search identified 195 articles, of which only 11 were included for qualitative analysis. All studies used 3D dental models based on computer-aided design data. Surgical guides and stereolithographic models were used by 4 and 1 study respectively. A total of 91 transplanted teeth were evaluated, out of which only 88 were considered within the parameters of clinical success (96.7%). Only 7 out of the 11 articles reported the specific autotransplanted tooth, being mandibular third molars the most prevalent autotransplanted teeth. CONCLUSIONS: Although the application of new technologies for DAT increases the success rate of this technique, further primary studies are still needed to address long-term teeth survival rates and complications. The cost and availability to implement the integration of these techniques to DAT may be a variable to consider, as this can be a limitation for some patients or for low-income countries.

OUTCOMES OF AUTOTRANSPLANTED THIRD MOLARS WITH COMPLETE ROOT FORMATION: A SYSTEMIC REVIEW AND META-ANALYSIS.

OBJECTIVES: Clear evidence is lacking regarding the outcomes of autogenous tooth transplantation (ATT) of third molars with complete root formation. The current review aims to explore the long-term survival and complication rates. METHODS: A comprehensive search was performed in December 2022 of the PubMed, Scopus, Embase, EBSCO, Ovid, Science Direct, and Web of Science databases. The systematic review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and registered at the International Prospective Register of Systematic Reviews (CRD42022337659). The pooled survival, root resorption, and ankyloses rates were calculated. Subgroup analyses were performed to explore the effects of sample size and 3D techniques. RESULTS: Twelve studies from 5 countries fulfilled the eligibility, with 759 third molars transplanted in 723 patients. Five studies reported 100% survival at 1-year follow-up. After excluding these 5 studies, the pooled survival rate was 93.62% at 1 year. The survival rate of 1 large sample study was significantly higher than that of small ones at 5 years. The complications of studies using 3D techniques were: root resorption 2.06% (95% CI: 0.22, 7.50) and ankyloses 2.81% (95% CI: 0.16, 12.22), compared to those without 3D techniques: root resorption 10.18% (95% CI: 4.50, 17.80) and ankyloses 6.49% (95% CI: 3.45, 10.96). CONCLUSIONS: ATT of third molars with complete root formation is a reliable alternative for replacement of a missing tooth and has a promising survival rate. The use of 3D techniques can reduce complication rates and improve long-term survival.

Technology at the service of surgery in a new technique of autotransplantation by guided surgery: a case report.

BACKGROUND: The aim of this case report was to use a surgical technique for autotransplantation of tooth using virtually planned 3D printed surgical templates for guided osteotomy preparation of the recipient of donor tooth. CASE PRESENTATION: An 18-year-old male patient received autotransplantation of the right mandibular third molar to replace an included right second molar. This procedure was based on guided implant surgery methods by superimposition of DICOM files and 3D data sets of the jaws. In order to design a 3D-printed template with the aid of a fully digital workflow; the third molar was conserved in PRGF during the surgical procedure and the tooth socket was prepared with a template and the help of a 3D-printed donor tooth copy in order to prevent iatrogenic damage to the donor tooth. This template and replica were manufactured using 3D-printing techniques. The transplanted tooth was placed in infra-occlusion and fixed with a suture splint and root canal therapy was performed 15 days later. The intervention was be accomplished by performing preplanned virtual transplantations with guided osteotomies to ensure accurate donor tooth placement in the new recipient site. The 24 months follow-up showed physiological clinical and radiologic results compatible with healing periradicular tissues. CONCLUSIONS: This approach enables the planning and production of a 3D printed surgical template using the latest diagnostic methods and techniques of guided implant surgery. These accurate virtually predesigned surgical templates and printed analogues of the donor tooth could facilitate autotransplantation, ensuring an atraumatic surgical protocol.

Autotransplantation of mature impacted tooth to a fresh molar socket using a 3D replica and guided bone regeneration: two years retrospective case series.

BACKGROUND: The aim of this study was to evaluate the clinical outcome of autotransplantation of mature third molars to fresh molar extraction sockets using 3D replicas. METHODS: Ten patients underwent teeth autotransplantation with or without GBR. We observed the mobility, percussion, radiography examination, the probing depth and the masticatory function of the transplanted teeth during 2 years following up, which were transplanted into fresh molar sockets by using 3D replicas, and GBR when it is necessary. RESULTS: The average extra-oral time of donor tooth had been shortened to 1.65 min when used the 3D replica. Some probing depth of the transplanted tooth were deeper than 3 mm at 4 or 5 weeks temporarily. And one patient felt slight sensitive when chewing with soft food at 4 weeks, then disappeared. The clinical examination of the autotransplantation teeth during 1 year follow-up showed no sign of failure. CONCLUSIONS: The tooth autotransplantation using 3D replica with or without GBR is an effective method which can reduce the extra-oral time of the donor teeth and may result in less failure.

Autotransplantation of Third Molars With Platelet-Rich Plasma for Immediate Replacement of Extracted Non-Restorable Teeth: A Case Series.

PURPOSE: The aim of this study was to examine the use of platelet-rich plasma (PRP) for autotransplantation of third molars as a successful technique to provide immediate tooth structure for space maintenance and masticatory function when premature loss of a permanent tooth occurs and other dental restorative options are not indicated. MATERIALS AND METHODS: This study included 10 healthy patients 10 to 17 years of age with at least 1 immature third molar (one to two thirds of root formation) used to replace extracted non-restorable teeth. Eleven third molars were transplanted and adapted to sockets of the extracted teeth with the adjunct of PRP. Transplanted teeth were stabilized to the adjacent teeth using orthodontic wires and dental composite for 1 month. Patients were followed for 1 year. Function, tooth vitality, root development, and periodontal health were recorded. RESULTS: All 10 patients had functioning asymptomatic transplanted teeth, with physiologic tooth mobility after splint removal at 1 month and after 1 year. All 10 patients had positive tooth vitality (by cold test) at 3, 6, and 12 months; all transplants showed positive root development (average growth, 2.01 mm) confirmed and measured using periapical radiographs. No patients required root canal therapy at any point in the study. Periodontal assessments were performed at the scheduled follow-up appointments with circumferential periodontal probing. Periodontal health was maintained because probing depths were shallower than 4 mm during the 1-year follow-up. CONCLUSION: Autotransplantation of immature third molars with PRP shows excellent results and should be considered a viable option for premature loss of permanent molars. PRP might have other advantages, such as root promotion and neurosensory development.

Replacing Heavily Damaged Teeth by Third Molar Autotransplantation With the Use of Cone-Beam Computed Tomography and Rapid Prototyping.

This article describes the autotransplantation of third molars to replace heavily damaged premolars and molars. Specifically, this article reports on the use of preoperative cone-beam computed tomographic planning and 3-dimensional (3D) printed replicas of donor teeth to prepare artificial tooth sockets. In the present case, an 18-year-old patient underwent autotransplantation of 3 third molars to replace 1 premolar and 2 molars that were heavily damaged after trauma. Approximately 1 year after the traumatic incident, autotransplantation with the help of 3D planning and rapid prototyping was performed. The right maxillary third molar replaced the right maxillary first premolar. The 2 mandibular wisdom teeth replaced the left mandibular first and second molars. During the surgical procedure, artificial tooth sockets were prepared with the help of 3D printed donor tooth copies to prevent iatrogenic damage to the actual donor teeth. These replicas of the donor teeth were designed based on the preoperative cone-beam computed tomogram and manufactured with the help of 3D printing techniques. The use of a replica of the donor tooth resulted in a predictable and straightforward procedure, with extra-alveolar times shorter than 2 minutes for all transplantations. The transplanted teeth were placed in infraocclusion and fixed with a suture splint. Postoperative follow-up showed physiologic integration of the transplanted teeth and a successful outcome for all transplants. In conclusion, this technique facilitates a straightforward and predictable procedure for autotransplantation of third molars. The use of printed analogues of the donor teeth decreases the risk of iatrogenic damage and the extra-alveolar time of the transplanted tooth is minimized. This facilitates a successful outcome.

Autotransplantation of mature and immature third molars in 23 Chinese patients: a clinical and radiological follow-up study.

BACKGROUND: We investigated the clinical and radiographic outcomes of autotransplanted teeth over a follow-up period of 2 to 8 years, and summarize the findings of other relevant studies with regard to the primary factors that influence a good prognosis in such patients. METHODS: Twenty-three patients (6 men, 17 women) who attended Tanggu Stomatological Hospital, Tianjin, China, from 2008 through 2013, were included in the study. These patients presented with a variety of dental problems, including tooth loss, residual crowns, missing first or second molars, dental trauma, tooth fracture, and unrestored teeth. A total of 26 third molars, including 2 immature molars, were autotransplanted in these patients. The success rate of autotransplantation was assessed on the basis of clinical and radiographic outcomes after follow-up periods ranging from 2 to 8 years. RESULTS: Clinical examination revealed stability of all 26 transplanted teeth, with satisfactory masticatory function and no patient discomfort. Radiographic examination revealed normal periapical tissues and an intact lamina dura surrounding the tooth root, indicating adequate healing of periodontal tissues. CONCLUSIONS: Autotransplantation achieved good results in the Chinese sample population investigated, and was associated with an excellent prognosis. Rigorous case selection, adequate protection of the periodontal ligament, and proper oral hygiene contribute significantly to the long-term success of the procedure.

Tooth Auto-transplantation: An Alternative Treatment.

Auto-transplantation is the repositioning of an autogenously erupted, partially erupted, or unerupted tooth from one site to another in the same individual. The purpose of this case report is to describe the auto-transplantation of the mandibular third molars as an alternative means of replacing second molars requiring extraction. An orthopantomogram revealed horizontal impaction of teeth #37 and 47 and mesio-angular impaction of teeth #38 and 48. Cone beam computed tomography revealed that the roots of #37 and 47 were in close proximity to the inferior alveolar canal bilaterally. As atraumatic and complete removal of these two teeth was not possible, #38 and 48 were chosen as the donor teeth instead. The procedure was carried out under general anesthesia. Teeth #38 and 48 were extracted atraumatically; teeth #37 and 47 were pulled out by sectioning and transplant sites prepared. Teeth #38 and 48 were transplanted to the sites vacated by teeth #37 and 47, respectively. Endodontic treatment of teeth #38 and 48 was completed within 1 month following transplantation. Both clinical and radiographic outcomes were considered satisfactory at 1 year postoperatively. Bone healing was observed around the roots of teeth #38 and 48. In conclusion, although auto-transplantation is not very common in general dental practice, we believe that it offers a clinically and economically viable alternative to other complicated prosthetic and dental implant treatments.

Transplant vs implant in a patient with agenesis of both maxillary lateral incisors: A 9-year follow-up.

INTRODUCTION: Agenesis of a maxillary lateral incisor occurs in about 2% of the population. Treatment options should adapt to natural biologic changes in a lifelong perspective. METHODS AND RESULTS: A young woman with bilateral agenesis of the maxillary lateral incisors was treated with transplantation of a developing maxillary third molar on one side and a dental implant on the contralateral side, after orthodontic space opening. The periodontal examination, including bacterial testing of the transplant, the implant, and the control central incisor, was performed 9 years after the treatment. A radiologic assessment was also performed. The transplanted tooth did not differ from a natural incisor, except for the pulp obliteration, and the total bacteria count was higher at the implant site. The periodontal tissues around the implant showed progressive signs of recession. CONCLUSIONS: Both tooth transplants and dental implants for replacing missing maxillary incisors can be effective in the long term. This report supports natural tooth substitution rather than implant placement for dental agenesis in the anterior maxilla.

Root and Root Canal Morphology of Human Third Molar Teeth.

Successful root canal treatment depends on having comprehensive information regarding the root(s)/canal(s) anatomy. Dentists may have some complication in treatment of third molars because the difficulty in their access, their aberrant occlusal anatomy and different patterns of eruption. The aim of this review was to review and address the number of roots and root canals in third molars, prevalence of confluent canals in third molars, C-shaped canals, dilaceration and fusion in third molars, autotransplantation of third molars and endodontic treatment strategies for third molars.

Optimizing third molar autotransplantation: applications of reverse-engineered surgical templates and rapid prototyping of three-dimensional teeth.

The success of autogenous tooth transplantation depends on the vitality of the periodontal ligament attached to the donor tooth, and its viability decreases when it is exposed extraorally. This report describes the case of a 16-year-old patient in whom a rapid prototyped tooth model was performed using cone-beam technology and a surgical template guide for autotransplantation as an effective technique for a critical time-based procedure.

Evaluating success of autotransplantation of embedded/impacted third molars harvested using piezosurgery: a pilot study.

OBJECTIVE: To evaluate the success of autogenous transplantation of embedded/impacted third molars harvested using piezosurgery. MATERIALS AND METHODS: This prospective pilot study enrolled 20 healthy patients with non-restorable first/second molars and a caries-free retrievable embedded/impacted third molar. Piezosurgery was used for removing inter-radicular bone at the recipient socket as well as for bone removal around the donor teeth. RESULTS: After an average follow-up of 16.4 months (SD = 1.9), 18 cases were successful with formation of periodontal ligament around the teeth. One tooth was lost due to infection at 1 month. One patient was lost to follow-up. There was no root resorption or ankylosis in any of the cases. In six donor teeth with complete root formation, root canal treatment was carried out. All the remaining teeth responded positively with vitality testing. CONCLUSION: Piezosurgery is an effective device if embedded/impacted third molars are to be harvested for successful autogenous transplantation.

Risk factors affecting third molar autotransplantation during 5 and 10 years.

The aim of this study was to investigate risk factors affecting 5- and 10-year survival in autotransplantation of third molars with complete root formation at dental clinics. Participating dentists were requested to provide information on transplantations performed between 1 January 1990 and 31 December 2009. After data screening and elimination, 183 teeth in 171 men aged 20-72 years (mean, 44.8 years) and 205 teeth in 189 women aged 20-74 years (mean, 42.0 years) were included in the study. A single-factor analysis using the log-rank test revealed that the following factors had a significant influence (p<0.05) on 5-year survival in transplanted teeth in men: recipient site in the maxilla and fewer than 25 present teeth; those for 10-year survival, on the other hand, were recipient site tooth extraction due to periodontal disease, recipient site in the maxilla, fewer than 25 present teeth, and Eichner index Group B1 to C. Cox regression analysis revealed that the odds ratio for 5-year survival for recipient site in the maxilla was 2.873 (95% CI, 1.073-7.695), while that for 10-year survival was 3.713 (95% CI, 1.601-8.609) for recipient site extraction due to periodontal disease, 2.190 (95% CI, 1.021-4.700) for recipient site in the maxilla, and 3.110 (95% CI, 1.470-6.581) for fewer than 25 present teeth. In women, the log-rank test indicated experience of less than 10-year in performing treatment as a significant factor (p <0.05) in 5-year survival. These results suggest that medium-term survival in transplanted teeth is influenced by operational risk factors in women, while long-term survival in transplanted teeth is influenced by individual oral status in men.

Bilateral Digitally Aided Tooth Autotransplantation: A 2-Year Case Report.

Tooth autotransplantation is an effective treatment to replace missing teeth. Digital planning can facilitate successful autotransplantation. Guiding templates are highly recommended when performing cases in healed ridges in the posterior area to reduce excessive bone loss and increase the chances of fitting the donor tooth in the new socket. This case report highlights the use of 3D planning tools and fully guided drilling templates for successful tooth autotransplantation in the posterior area. Two tooth autotransplantations were performed in a 51-year-old patient using mandibular third molars to replace hopeless mandibular first and second molars. Root canal treatments were carried out before the surgeries, and different alveoloplasty techniques were used in each recipient area. The prosthetic phase was carried out after 9 months. Both teeth were asymptomatic, functional, and exhibited no signs of resorption or apical radiolucency and showed complete regeneration of the periodontal apparatus at the 2-year follow-up.

Tooth autotransplantation with adjunctive application of enamel matrix derivatives using a digital workflow: A prospective case series.

OBJECTIVES: Digital protocols and bioactive materials may reduce complications and improve tooth autotransplantation (ATT) success and survival rates. This prospective study assesses the performance of a fully digital autotransplantation protocol of close-apex molars with the adjunctive application of Enamel Matrix Derivatives (EMD). METHODS: Twelve adult patients with 13 hopeless molar teeth were replaced with autotransplantation of closed apex third molars. Outcomes, including success and survival rates, clinical, endodontic, radiographic, patient-reported outcome measures (PROMs), and digital image assessments, were conducted over a two-year follow-up period. RESULTS: Survival and success rates were 100% and 91.2%, respectively, with no progressive inflammatory or replacement root resorption (ankylosis) except for one tooth presenting radiographic furcation involvement. A significant probing depth reduction of 2.4 ± 2.58 mm and CAL gains of 2.8 ± 3.03 mm were observed in transplanted teeth compared to the hopeless receptor teeth. Radiographic bone levels remained stable throughout the study period (-0.37 ± 0.66 mm), and digital image assessments showed minimal alveolar ridge width changes (-0.32 to -0.7 mm) and gingival margin changes (-0.95 to -1.27 mm) from baseline to last visit. PROMs indicated very high patient satisfaction. CONCLUSION: The use of a digital ATT protocol with adjunctive use of EMD in closed-apex third molars demonstrated promising short-term high success and survival rates. Additionally, this type of therapy adequately preserves the dimensions of the alveolar ridge in the receptor site. CLINICAL SIGNIFICANCE: This is the first prospective clinical study examining the effect of a digital tooth autotransplantation protocol combined with the application of EMD. It demonstrates that this approach is an effective treatment for replacing hopeless teeth and also validates the digital assessment of ATT alveolar ridge preservation at the recipient site.

Influence of age on tooth autotransplantation with complete root formation.

The aim of this study was to investigate risk factors with age in the long-term prognosis of autotransplantation of teeth with complete root formation at dental clinics. Participating dentists were asked to provide information on transplantations they had undertaken from 1 January 1990 to 31 December 2010. Data on a total of 708 teeth from 637 patients were collected. The data were screened to exclude patients who were under 25 or 70 years of age and over, those who were smokers or whose smoking habits were unknown, those whose transplanted teeth had incomplete root formation or multiple roots and those with fewer than 25 present teeth post-operation. The participants in this study were 71 men (74 teeth) and 100 women (107 teeth) ranging from 25 to 69 years of age. Third molars were used as donor teeth in 89·0% of the cases. The participants were divided into three age groups of 25-39, 40-54 and 55-69. Survival analysis was conducted using the Kaplan-Meier method, and a log-rank test revealed that there were no significant differences in age groups for men or women. Cox regression analysis indicated that the survival of transplanted teeth was not influenced by age. However, although not statistically significant, the clinical success rate was lower in the 55-69-year-old group than that in the younger groups. These results indicate that if suitable donor teeth are available and the conditions are right, autotransplantation is a viable treatment for missing teeth regardless of the age of the patient.

Orthognathic treatment with autotransplantation of a third molar.

Autotransplantation is an option for tooth replacement when a suitable tooth is available and anatomic circumstances are favorable. This case report describes successful orthognathic treatment that was combined with autotransplantation of a maxillary third molar. A 20-year-old woman had mandibular protrusion and facial asymmetry. Five years previously, her mandibular right first molar had been extracted because of dental caries. After preoperative orthodontic treatment, we performed a LeFort I procedure and a bilateral intraoral vertical ramus osteotomy to correct the patient's mandibular protrusion and facial asymmetry. During the postoperative orthodontic treatment, the maxillary left third molar was autotransplanted into the mandibular right first molar site. The total treatment period was 24 months. As a result of these therapeutic treatments, the patient's facial appearance was improved, and an implant was unnecessary. The autotransplanted tooth effectively supported the adjacent teeth and maintained her chewing ability.

Results after wisdom tooth transplantation. A retrospective study.

Wisdom tooth transplants offer youth the possibility of biologically fixed tooth replacement in cases of premolar agenesis or premature loss of a molar. In the present study, 57 transplants of third molars were reviewed and evaluated retrospectively on preoperative findings (root growth stages, extraction sites, indication for transplantation), on postoperative clinical findings (local gingivitis, periodontal probing values, tooth mobility, percussion sound and percussion pain) and on radiological findings (tertiary build-up of dentin, osseous periradicular conditions, progress of root growth). Only the transplants which healed with a vital pulp and in a periodontally healthy state were considered successful. Upper and lower wisdom teeth having 50% to 75% root growth progression were transplanted. The postoperative follow-up observation period averaged 26.4 months. The success of a wisdom tooth transplantation was not influenced by the root growth stage (p = 1), the extraction location of wisdom teeth (p = 0.45), or the feasibility for a transplantation (p = 0.56). Three teeth showed pulpal necrosis with apical periodontitis and were counted as failures. The success rate was rather high with 54 out of 57 transplants (94.7%), therefore wisdom tooth transplantations, with careful selection of a suitable graft and its gentle removal, can be described as a good predictable treatment.

Autotransplantation of Maxillary Third Molar with Its Attached Buccal Cortical Plate Combined with a Connective Tissue Graft.

INTRODUCTION: Tooth replacement often leads to insufficient vertical volume in the recipient socket bone. The aim of this novel report is to present a successful fully guided autotransplantation of a maxillary right third molar (tooth #1) with its attached buccal plate. The procedure was combined with a palatal connective tissue graft to reconstruct a buccal hard and soft tissue defect of an irreparable maxillary right first molar (tooth #3). METHODS: A 45-year-old man complaining of pain in tooth #3 came to the clinic. Tooth #3 was non-restorable due to an extensive caries and a vertical root fracture of the mesiobuccal root, leading to a total loss of the buccal cortical plate. Guided autotransplantation of tooth #1 was completed by using 3-dimensional surgical templates for implant burs and a 3-dimensional-printed replica. After positioning the donor tooth, the cortical plate was fixed to the recipient socket with osteosynthesis screws. A connective tissue graft was also harvested to increase the band of keratinized gingiva and the thickness of the buccal soft tissue. At 6-month follow-up, the screws were removed, showing excellent regeneration throughout the buccal area. RESULTS: At 3-year follow-up, the transplanted tooth was asymptomatic, with a natural bone level and no signs of replacement or inflammatory root resorption. CONCLUSIONS: The use of a donor tooth and its attached bone cortical plate combined simultaneously with a connective tissue graft appears to improve hard and soft tissues in a single procedure.