Electrolocation? The evidence for redox-mediated taxis in Shewanella oneidensis.

Shewanella oneidensis is a dissimilatory metal reducing bacterium and model for extracellular electron transfer (EET), a respiratory mechanism in which electrons are transferred out of the cell. In the last 10 years, migration to insoluble electron acceptors for EET has been shown to be nonrandom and tactic, seemingly in the absence of molecular or energy gradients that typically allow for taxis. As the ability to sense, locate, and respire electrodes has applications in bioelectrochemical technology, a better understanding of taxis in S. oneidensis is needed. While the EET conduits of S. oneidensis have been studied extensively, its taxis pathways and their interplay with EET are not yet understood, making investigation into taxis phenomena nontrivial. Since S. oneidensis is a member of an EET-encoding clade, the genetic circuitry of taxis to insoluble acceptors may be conserved. We performed a bioinformatic analysis of Shewanella genomes to identify S. oneidensis chemotaxis orthologs conserved in the genus. In addition to the previously reported core chemotaxis gene cluster, we identify several other conserved proteins in the taxis signaling pathway. We present the current evidence for the two proposed models of EET taxis, "electrokinesis" and flavin-mediated taxis, and highlight key areas in need of further investigation.

Impact of anodophilic biofilm bioelectroactivity on the denitrification behavior of air-cathode microbial fuel cells.

Generally, high bioelectroactivity of anodophilic biofilm favors high power generation of microbial fuel cell (MFC); however, it is not clear whether it can promote denitrification of MFC synchronously. In this study, we studied the impact of anodophilic biofilm bioelectroactivity on the denitrification behavior of air-cathode MFC (AC-MFC) in steady state and found that high bioelectroactivity of anodophilic biofilm not only favored high power generation of the AC-MFC, but also promoted the growth of denitrifers at the anodes and strengthened denitrification. Anodophilic biofilms of AC-MFC with various bioelectroactivity were acclimated at conditions of open circuit (OC), Rext of 1000 Ω and 20 Ω (denoted as AC-MFC-OC, AC-MFC-1000Ω, and AC-MFC-20Ω, respectively) and performed for over 100 days. Electrochemical tests and microbial analysis results showed that the anode of the AC-MFC-20Ω delivered higher current response of both oxidation and denitrification and had higher abundance of electroactive bacteria than the AC-MFC-OC, AC-MFC-1000Ω, demonstrating a higher bioelectroactivity of the anodophilic biofilms. Moreover, these electroactive bacteria favored the accumulation of denitrifers, like Thauera and Alicycliphilus, probably by consuming trace oxygen through catalyzing oxygen reduction. The AC-MFC-20Ω not only delivered a 61.7% higher power than the AC-MFC-1000Ω, but also achieved a stable and high denitrification rate constant (kDN ) of 1.9 h-1 , which was 50% and 40% higher than that of the AC-MFC-OC and AC-MFC-1000Ω, respectively. It could be concluded that the high bioelectroactivity of the anodophilic biofilms not only favored high power generation of the AC-MFC, but also promoted the enrichment of denitrifers at the anodes and strengthened denitrification. This study provided an effective method for enhancing power generation and denitrification performance of the AC-MFC synchronously.

Identification of a Diguanylate Cyclase That Facilitates Biofilm Formation on Electrodes by Shewanella oneidensis MR-1.

In many bacteria, cyclic diguanosine monophosphate (c-di-GMP), synthesized by diguanylate cyclase (DGC), serves as a second messenger involved in the regulation of biofilm formation. Although studies have suggested that c-di-GMP also regulates the formation of electrochemically active biofilms (EABFs) by Shewanella oneidensis MR-1, DGCs involved in this process remained to be identified. Here, we report that the SO_1646 gene, hereafter named dgcS, is upregulated under medium flow conditions in electrochemical flow cells (EFCs), and its product (DgcS) functions as a major DGC in MR-1. In vitro assays demonstrated that purified DgcS catalyzed the synthesis of c-di-GMP from GTP. Comparisons of intracellular c-di-GMP levels in the wild-type strain and a dgcS deletion mutant (ΔdgcS mutant) showed that production of c-di-GMP was markedly reduced in the ΔdgcS mutant when cells were grown in batch cultures and on electrodes in EFCs. Cultivation of the ΔdgcS mutant in EFCs also revealed that the loss of DgcS resulted in impaired biofilm formation and decreased current generation. These findings demonstrate that MR-1 uses DgcS to synthesize c-di-GMP under medium flow conditions, thereby activating biofilm formation on electrodes.IMPORTANCE Bioelectrochemical systems (BESs) have attracted wide attention owing to their utility in sustainable biotechnology processes, such as microbial fuel cells and electrofermentation systems. In BESs, electrochemically active bacteria (EAB) form biofilms on electrode surfaces, thereby serving as effective catalysts for the interconversion between chemical and electric energy. It is therefore important to understand mechanisms for the formation of biofilm by EAB grown on electrodes. Here, we show that a model EAB, S. oneidensis MR-1, expresses DgcS as a major DGC, thereby activating the formation of biofilms on electrodes via c-di-GMP-dependent signal transduction cascades. The findings presented herein provide the molecular basis for improving electrochemical interactions between EAB and electrodes in BESs. The results also offer molecular insights into how Shewanella regulates biofilm formation on solid surfaces in the natural environment.

Shewanella oneidensis as a living electrode for controlled radical polymerization.

Metabolic engineering has facilitated the production of pharmaceuticals, fuels, and soft materials but is generally limited to optimizing well-defined metabolic pathways. We hypothesized that the reaction space available to metabolic engineering could be expanded by coupling extracellular electron transfer to the performance of an exogenous redox-active metal catalyst. Here we demonstrate that the electroactive bacterium Shewanella oneidensis can control the activity of a copper catalyst in atom-transfer radical polymerization (ATRP) via extracellular electron transfer. Using S. oneidensis, we achieved precise control over the molecular weight and polydispersity of a bioorthogonal polymer while similar organisms, such as Escherichia coli, showed no significant activity. We found that catalyst performance was a strong function of bacterial metabolism and specific electron transport proteins, both of which offer potential biological targets for future applications. Overall, our results suggest that manipulating extracellular electron transport pathways may be a general strategy for incorporating organometallic catalysis into the repertoire of metabolically controlled transformations.

Direct cathodic electron uptake coupled to sulfate reduction by Desulfovibrio ferrophilus IS5 biofilms.

Direct electron uptake is emerging as a key process for electron transfer in anaerobic microbial communities, both between species and from extracellular sources, such as zero-valent iron (Fe0 ) or cathodic surfaces. In this study, we investigated cathodic electron uptake by Fe0 -corroding Desulfovibrio ferrophilus IS5 and showed that electron uptake is dependent on direct cell contact via a biofilm on the cathode surface rather than through secreted intermediates. Induction of cathodic electron uptake by lactate-starved D. ferrophilus IS5 cells resulted in the expression of all components necessary for electron uptake; however, protein synthesis was required for full biofilm formation. Notably, proteinase K treatment uncoupled electron uptake from biofilm formation, likely through proteolytic degradation of proteinaceous components of the electron uptake machinery. We also showed that cathodic electron uptake is dependent on SO4 2- reduction. The insensitivity of Fe0 corrosion to proteinase K treatment suggests that electron uptake from a cathode might involve different mechanism(s) than those involved in Fe0 corrosion.

Influence of long-term organic and conventional fertilization on bacterial communities involved in bioelectricity production from paddy field-microbial fuel cells.

Soils are rich in organics, particularly those that support the growth of plants. These organics are possible sources of sustainable energy, and a microbial fuel cell (MFC) system can potentially be used for this purpose. In this, the soil organic content expelled from plant root was possibly converted into electrical energy through the microbial metabolic process. The integration of MFC systems with living plant root system is a novel approach, which will facilitate sustainable resource for energy production. Therefore, the objective of this study is to electrochemically evaluate the paddy field MFCs (PF-MFCs) performance and methane emission under organic and conventional fertilization systems in paddy fields, and its impact on bacterial communities involved in bioelectricity production. Graphite (anode) and carbon (cathode) electrode MFC systems were configured and assembled in organic and conventionally fertilized paddy fields. The anode and bulk soil-associated bacterial communities were examined using high-throughput Illumina MiSeq sequencing platform. Our results revealed that the maximum electricity production and power density were observed in CFPF-MFC with less methane emission compared to OFPF-MFC. The next-generation sequencing (NGS) libraries showed that the bacterial population was significantly increased in the organic-fertilized field and the enhanced occurrence of the Geobacteraceae family in CFPF-MFC anode. By enhancing Geobacteraceae occurrence on the anode, the conventional fertilization improved the bioelectricity production with less methane emission. Further extension in the establishment of plant MFCs in various sedimentary environments will solve the global energy crisis.

Production of Current by Syntrophy Between Exoelectrogenic and Fermentative Hyperthermophilic Microorganisms in Heterotrophic Biofilm from a Deep-Sea Hydrothermal Chimney.

To study the role of exoelectrogens within the trophic network of deep-sea hydrothermal vents, we performed successive subcultures of a hyperthermophilic community from a hydrothermal chimney sample on a mix of electron donors in a microbial fuel cell system. Electrode (the electron acceptor) was swapped every week to enable fresh development from spent media as inoculum. The MFC at 80 °C yielded maximum current production increasing from 159 to 247 mA m-2 over the subcultures. The experiments demonstrated direct production of electric current from acetate, pyruvate, and H2 and indirect production from yeast extract and peptone through the production of H2 and acetate from fermentation. The microorganisms found in on-electrode communities were mainly affiliated to exoelectrogenic Archaeoglobales and Thermococcales species, whereas in liquid media, the communities were mainly affiliated to fermentative Bacillales and Thermococcales species. The work shows interactions between fermentative microorganisms degrading complex organic matter into fermentation products that are then used by exoelectrogenic microorganisms oxidizing these reduced compounds while respiring on a conductive support. The results confirmed that with carbon cycling, the syntrophic relations between fermentative microorganisms and exoelectrogens could enable some microbes to survive as biofilm in extremely unstable conditions. Graphical Abstract Schematic representation of cross-feeding between fermentative and exoelectrogenic microbes on the surface of the conductive support. B, Bacillus/Geobacillus spp.; Tc, Thermococcales; Gg, Geoglobus spp.; Py, pyruvate; Ac, acetate.

Electrochemical Reduction of Carbon Dioxide to Value-Added Products: The Electrocatalyst and Microbial Electrosynthesis.

The electrochemical reduction of carbon dioxide (CO2 ) to value-added products obtains great attention and investigation worldwide in recent years. The commercialization of this green process relies on the progress of relating high-performance electrocatalysts and their feasibility with proper reactor design. The microbial electrosynthesis (MES) is an alternative route to reduce CO2 with electroactive bio-film electrode as catalyst. This review presents the research status and development of cathode catalysts, particularly focusing on the active sites and development tendency, for highly efficient electrochemical reduction CO2 from personal viewpoint. Some of our results are also presented to exhibit contributions. MES shows a similar process to the typical electrochemical reduction of CO2 . Their combination is an important trend, and the future research in this field is full of challenges and opportunities.

Electrode Colonization by the Feammox Bacterium Acidimicrobiaceae sp. Strain A6.

Acidimicrobiaceae sp. strain A6 (A6), from the Actinobacteria phylum, was recently identified as a microorganism that can carry out anaerobic ammonium (NH4+) oxidation coupled to iron reduction, a process also known as Feammox. Being an iron-reducing bacterium, A6 was studied as a potential electrode-reducing bacterium that may transfer electrons extracellularly onto electrodes while gaining energy from NH4+ oxidation. Actinobacteria species have been overlooked as electrogenic bacteria, and the importance of lithoautotrophic iron reducers as electrode-reducing bacteria at anodes has not been addressed. By installing electrodes in the soil of a forested riparian wetland where A6 thrives, in soil columns in the laboratory, and in A6-bioaugmented constructed wetland (CW) mesocosms and by operating microbial electrolysis cells (MECs) with pure A6 culture, the characteristics and performances of this organism as an electrode-reducing bacterium candidate were investigated. In this study, we show that Acidimicrobiaceae sp. strain A6, a lithoautotrophic bacterium, is capable of colonizing electrodes under controlled conditions. In addition, A6 appears to be an electrode-reducing bacterium, since current production was boosted shortly after the CWs were seeded with enrichment A6 culture and current production was detected in MECs operated with pure A6, with the anode as the sole electron acceptor and NH4+ as the sole electron donor.IMPORTANCE Most studies on electrogenic microorganisms have focused on the most abundant heterotrophs, while other microorganisms also commonly present in electrode microbial communities, such as Actinobacteria strains, have been overlooked. The novel Acidimicrobiaceae sp. strain A6 (Actinobacteria) is an iron-reducing bacterium that can colonize the surface of anodes in sediments and is linked to electrical current production, making it an electrode-reducing bacterium. Furthermore, A6 can carry out anaerobic ammonium oxidation coupled to iron reduction. Therefore, findings from this study open the possibility of using electrodes instead of iron as electron acceptors, as a means to promote A6 to treat NH4+-containing wastewater more efficiently. Altogether, this study expands our knowledge of electrogenic bacteria and opens the possibility of developing Feammox-based technologies coupled to bioelectric systems for the treatment of NH4+ and other contaminants in anoxic systems.

Anodic electro-fermentation: Anaerobic production of L-Lysine by recombinant Corynebacterium glutamicum.

Microbial electrochemical technologies (MET) are promising to drive metabolic processes for the production of chemicals of interest. They provide microorganisms with an electrode as an electron sink or an electron source to stabilize their redox and/or energy state. Here, we applied an anode as additional electron sink to enhance the anoxic metabolism of the industrial bacterium Corynebacterium glutamicum through an anodic electro-fermentation. In using ferricyanide as extracellular electron carrier, anaerobic growth was enabled and the feedback-deregulated mutant Corynebacterium glutamicum lysC further accumulated L-lysine. Under such oxidizing conditions we achieved L-lysine titers of 2.9 mM at rates of 0.2 mmol/L/hr. That titer is comparable to recently reported L-lysine concentrations achieved by anaerobic production under reductive conditions (cathodic electro-fermentation). However unlike other studies, our oxidative conditions allowed anaerobic cell growth, indicating an improved cellular energy supply during anodic electro-fermentation. In that light, we propose anodic electro-fermentation as the right choice to support C. glutamicum stabilizing its redox and energy state and empower a stable anaerobic production of L-lysine.

Phreatobacter cathodiphilus sp. nov., isolated from a cathode of a microbial fuel cell.

A novel bacterial strain, S-12T, of a member of the genus Phreatobacterwas isolated from a cathode of a microbial fuel cell from Suwon City, South Korea. Cells were Gram-staining-negative, aerobic, non-sporulating rods, motile by means of a polar flagellum, and formed white round colonies. The strain grew at the range of 10-40 °C (optimum, 28-30 °C), pH 6.0-10.0 (optimum 7.0-8.0) and 0-1 % NaCl. The 16S rRNA gene sequence analysis showed the relatedness of S-12T to Phreatobacter stygiusYC6-17T (98.2 %) and Phreatobacter oligotrophusPI_21T (98.1 %). The major respiratory quinone was ubiquinone Q-10. Polar lipids consisted of diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylglycerol, phosphatidylcholine and an unidentified lipid. The major fatty acids were summed feature 8 (C18 : 1ω7c and/or C18 : 1ω6c). The DNA G+C content was 69.3 mol%. On the basis of its differences from species of the genus Phreatobacter with validly published names, strain S-12T is identified as representing a novel species, for which the proposed name is Phreatobactercathodiphilus sp. nov., with S-12T as the type strain (=KACC 18497T=JCM 31612T).

Bioelectrochemical system for the biooxidation of a chalcopyrite concentrate by acidophilic bacteria coupled to energy current generation and cathodic copper recovery.

OBJECTIVES: To develop a bioelectrochemical system (BES) to couple the biooxidation of chalcopyrite (CuFeS2), bioelectrogenesis, and the cathodic Cu2+ reduction, bioanodes of acidophilic (pH < 2) and aerobic chemolithoautotrophic bacteria Acidithiobacillus thiooxidans (sulfur oxidizing) and Leptospirillum sp. (Fe2+ oxidizing) were used. RESULTS: CuFeS2 biooxidation increases the charge transfer from the media due to the bioleaching of Cu and Fe. The biofilm on a graphite bar endows a more electropositive (anodic) character to the bioelectrode. By adding the bioleachate generated by both bacteria into the anodic chamber, the acidic bioleachate provides the faradaic intensity. The maximum current density was 0.86 ± 19 mA cm-2 due to the low potential of the BES of 0.18 ± 0.02 V. Such low potential was sufficient for the cathodic deposit of Cu2+. CONCLUSIONS: This work demonstrates a proof of concept for energy savings for mining industries: bioanodes of A. thiooxidans and Leptospirillum sp. are electroactive during the biooxidation of CuFeS2.

Charge-Directed Immobilization of Bacteriophage on Nanostructured Electrode for Whole-Cell Electrochemical Biosensors.

A new type of carbon nanotube (CNT)-based impedimetric biosensing method has been developed for rapid and selective detection of live bacterial cells. A proof-of-concept study was conducted using T2 bacteriophage-based biosensors for electrochemical detection of Escherichia coli B. The T2 bacteriophage (virus) served as the biorecognition element, which was immobilized on polyethylenimine (PEI)-functionalized carbon nanotube transducer on glassy carbon electrode. Charge-directed, orientated immobilization of bacteriophage particles on carbon nanotubes was achieved through covalent linkage of phage capsid onto the carbon nanotubes. The presence of the immobilized phage on carbon nanotube-modified electrode was confirmed by fluorescence microscopy. Electrochemical impedance spectroscopy (EIS) was used to monitor the changes in the interfacial impedance due to the binding of E. coli B to T2 phage on the CNT-modified electrode. The detection was highly selective toward the B strain of E. coli as no signal was observed for the nonhost K strain of E. coli. The present achievable detection limit of the biosensor is 103 CFU/mL.

In vitro metabolic engineering of bioelectricity generation by the complete oxidation of glucose.

The direct generation of electricity from the most abundant renewable sugar, glucose, is an appealing alternative to the production of liquid biofuels and biohydrogen. However, enzyme-catalyzed bioelectricity generation from glucose suffers from low yields due to the incomplete oxidation of the six-carbon compound glucose via one or few enzymes. Here, we demonstrate a synthetic ATP- and CoA-free 12-enzyme pathway to implement the complete oxidation of glucose in vitro. This pathway is comprised of glucose phosphorylation via polyphosphate glucokinase, NADH generation catalyzed by glucose 6-phosphate dehydrogenase (G6PDH) and 6-phosphogluconate dehydrogenase (6PGDH), electron transfer from NADH to the anode, and glucose 6-phosphate regeneration via the non-oxidative pentose phosphate pathway and gluconeogenesis. The faraday efficiency from glucose to electrons via this pathway was as high as 98.8%, suggesting the generation of nearly 24 electrons per molecule of glucose. The generated current density was greatly increased from 2.8 to 6.9mAcm-2 by replacing a low-activity G6PDH with a high-activity G6PDH and introducing a new enzyme, 6-phosphogluconolactonase, between G6PDH and 6PGDH. These results suggest the great potential of high-yield bioelectricity generation through in vitro metabolic engineering.

Structures, Compositions, and Activities of Live Shewanella Biofilms Formed on Graphite Electrodes in Electrochemical Flow Cells.

An electrochemical flow cell equipped with a graphite working electrode (WE) at the bottom was inoculated with Shewanella oneidensis MR-1 expressing an anaerobic fluorescent protein, and biofilm formation on the WE was observed over time during current generation at WE potentials of +0.4 and 0 V (versus standard hydrogen electrodes), under electrolyte-flow conditions. Electrochemical analyses suggested the presence of unique electron-transfer mechanisms in the +0.4-V biofilm. Microscopic analyses revealed that, in contrast to aerobic biofilms, current-generating biofilm (at +0.4 V) was thin and flat (∼10 µm in thickness), and cells were evenly and densely distributed in the biofilm. In contrast, cells were unevenly distributed in biofilm formed at 0 V. In situ fluorescence staining and biofilm recovery experiments showed that the amounts of extracellular polysaccharides (EPSs) in the +0.4-V biofilm were much smaller than those in the aerobic and 0-V biofilms, suggesting that Shewanella cells suppress the production of EPSs at +0.4 V under flow conditions. We suggest that Shewanella cells perceive electrode potentials and modulate the structure and composition of biofilms to efficiently transfer electrons to electrodes.IMPORTANCE A promising application of microbial fuel cells (MFCs) is to save energy in wastewater treatment. Since current is generated in these MFCs by biofilm microbes under horizontal flows of wastewater, it is important to understand the mechanisms for biofilm formation and current generation under water-flow conditions. Although massive work has been done to analyze the molecular mechanisms for current generation by model exoelectrogenic bacteria, such as Shewanella oneidensis, limited information is available regarding the formation of current-generating biofilms over time under water-flow conditions. The present study developed electrochemical flow cells and used them to examine the electrochemical and structural features of current-generating biofilms under water-flow conditions. We show unique features of mature biofilms actively generating current, creating opportunities to search for as-yet-undiscovered current-generating mechanisms in Shewanella biofilms. Furthermore, information provided in the present study is useful for researchers attempting to develop anode architectures suitable for wastewater treatment MFCs.

Resilience, Dynamics, and Interactions within a Model Multispecies Exoelectrogenic-Biofilm Community.

Anode-associated multispecies exoelectrogenic biofilms are essential for the function of bioelectrochemical systems (BESs). The individual activities of anode-associated organisms and physiological responses resulting from coculturing are often hard to assess due to the high microbial diversity in these systems. Therefore, we developed a model multispecies biofilm comprising three exoelectrogenic proteobacteria, Shewanella oneidensis, Geobacter sulfurreducens, and Geobacter metallireducens, with the aim to study in detail the biofilm formation dynamics, the interactions between the organisms, and the overall activity of an exoelectrogenic biofilm as a consequence of the applied anode potential. The experiments revealed that the organisms build a stable biofilm on an electrode surface that is rather resilient to changes in the redox potential of the anode. The community operated at maximum electron transfer rates at electrode potentials that were higher than 0.04 V versus a normal hydrogen electrode. Current densities decreased gradually with lower potentials and reached half-maximal values at -0.08 V. Transcriptomic results point toward a positive interaction among the individual strains. S. oneidensis and G. sulfurreducens upregulated their central metabolisms as a response to cultivation under mixed-species conditions. G. sulfurreducens was detected in the planktonic phase of the bioelectrochemical reactors in mixed-culture experiments but not when it was grown in the absence of the other two organisms.IMPORTANCE In many cases, multispecies communities can convert organic substrates into electric power more efficiently than axenic cultures, a phenomenon that remains unresolved. In this study, we aimed to elucidate the potential mutual effects of multispecies communities in bioelectrochemical systems to understand how microbes interact in the coculture anodic network and to improve the community's conversion efficiency for organic substrates into electrical energy. The results reveal positive interactions that might lead to accelerated electron transfer in mixed-species anode communities. The observations made within this model biofilm might be applicable to a variety of nonaxenic systems in the field.

Electrochemical performance and microbial community profiles in microbial fuel cells in relation to electron transfer mechanisms.

BACKGROUND: Microbial fuel cells (MFCs) operating with complex microbial communities have been extensively reported in the past, and are commonly used in applications such as wastewater treatment, bioremediation or in-situ powering of environmental sensors. However, our knowledge on how the composition of the microbial community and the different types of electron transfer to the anode affect the performance of these bioelectrochemical systems is far from complete. To fill this gap of knowledge, we designed a set of three MFCs with different constrains limiting direct and mediated electron transfer to the anode. RESULTS: The results obtained indicate that MFCs with a naked anode on which a biofilm was allowed unrestricted development (MFC-A) had the most diverse archaeal and bacterial community, and offered the best performance. In this MFC both, direct and mediated electron transfer, occurred simultaneously, but direct electron transfer was the predominant mechanism. Microbial fuel cells in which the anode was enclosed in a dialysis membrane and biofilm was not allowed to develop (MFC-D), had a much lower power output (about 60% lower), and a prevalence of dissolved redox species that acted as putative electron shuttles. In the anolyte of this MFC, Arcobacter and Methanosaeta were the prevalent bacteria and archaea respectively. In the third MFC, in which the anode had been covered by a cation selective nafion membrane (MFC-N), power output decreased a further 5% (95% less than MFC-A). In this MFC, conventional organic electron shuttles could not operate and the low power output obtained was presumably attributed to fermentation end-products produced by some of the organisms present in the anolyte, probably Pseudomonas or Methanosaeta. CONCLUSION: Electron transfer mechanisms have an impact on the development of different microbial communities and in turn on MFC performance. Although a stable current was achieved in all cases, direct electron transfer MFC showed the best performance concluding that biofilms are the major contributors to current production in MFCs. Characterization of the complex microbial assemblages in these systems may help us to unveil new electrogenic microorganisms and improve our understanding on their role to the functioning of MFCs.

Community analysis of biofilms on flame-oxidized stainless steel anodes in microbial fuel cells fed with different substrates.

BACKGROUND: The flame-oxidized stainless steel anode (FO-SSA) is a newly developed electrode that enhances microbial fuel cell (MFC) power generation; however, substrate preference and community structure of the biofilm developed on FO-SSA have not been well characterized. Herein, we investigated the community on FO-SSA using high-throughput sequencing of the 16S rRNA gene fragment in acetate-, starch-, glucose-, and livestock wastewater-fed MFCs. Furthermore, to analyze the effect of the anode material, the acetate-fed community formed on a common carbon-based electrode-carbon-cloth anode (CCA)-was examined for comparison. RESULTS: Substrate type influenced the power output of MFCs using FO-SSA; the highest electricity was generated using acetate as a substrate, followed by peptone, starch and glucose, and wastewater. Intensity of power generation using FO-SSA was related to the abundance of exoelectrogenic genera, namely Geobacter and Desulfuromonas, of the phylum Proteobacteria, which were detected at a higher frequency in acetate-fed communities than in communities fed with other substrates. Lactic acid bacteria (LAB)-Enterococcus and Carnobacterium-were predominant in starch- and glucose-fed communities, respectively. In the wastewater-fed community, members of phylum Planctomycetes were frequently detected (36.2%). Exoelectrogenic genera Geobacter and Desulfuromonas were also detected in glucose-, starch-, and wastewater-fed communities on FO-SSA, but with low frequency (0-3.2%); the lactate produced by Carnobacterium and Enterococcus in glucose- and starch-fed communities might affect exoelectrogenic bacterial growth, resulting in low power output by MFCs fed with these substrates. Furthermore, in the acetate-fed community on FO-SSA, Desulfuromonas was abundant (15.4%) and Geobacter had a minor proportion (0.7%), while in that on CCA, both Geobacter and Desulfuromonas were observed at similar frequencies (6.0-9.8%), indicating that anode material affects exoelectrogenic genus enrichment in anodic biofilm. CONCLUSIONS: Anodic community structure was dependent on both substrate and anode material. Although Desulfuromonas spp. are marine microorganisms, they were abundant in the acetate-fed community on FO-SSA, implying the presence of novel non-halophilic and exoelectrogenic species in this genus. Power generation using FO-SSA was positively related to the frequency of exoelectrogenic genera in the anodic community. Predominant LAB in saccharide-fed anodic biofilm caused low abundance of exoelectrogenic genera and consequent low power generation.

Electromicrobiology.

Electromicrobiology deals with the interactions between microorganisms and electronic devices and with the novel electrical properties of microorganisms. A diversity of microorganisms can donate electrons to, or accept electrons from, electrodes without the addition of artificial electron shuttles. However, the mechanisms for microbe-electrode electron exchange have been seriously studied in only a few microorganisms. Shewanella oneidensis interacts with electrodes primarily via flavins that function as soluble electron shuttles. Geobacter sulfurreducens makes direct electrical contacts with electrodes via outer-surface, c-type cytochromes. G. sulfurreducens is also capable of long-range electron transport along pili, known as microbial nanowires, that have metallic-like conductivity similar to that previously described in synthetic conducting polymers. Pili networks confer conductivity to G. sulfurreducens biofilms, which function as a conducting polymer, with supercapacitor and transistor functionalities. Conductive microorganisms and/or their nanowires have a number of potential practical applications, but additional basic research will be necessary for rational optimization.

Electrochemical techniques reveal that total ammonium stress increases electron flow to anode respiration in mixed-species bacterial anode biofilms.

When anode-respiring bacteria (ARB) respire electrons to an anode in microbial electrochemical cells (MXCs), they harvest only a small amount of free energy. This means that ARB must have a high substrate-oxidation rate coupled with a high ratio of electrons used for respiration compared to total electrons removed by substrate utilization. It also means that they are especially susceptible to inhibition that slows anode respiration or lowers their biomass yield. Using several electrochemical techniques, we show that a relatively high total ammonium-nitrogen (TAN) concentration (2.2 g TAN/L) induced significant stress on the ARB biofilms, lowering their true yield and forcing the ARB to boost the ratio of electrons respired per electrons consumed from the substrate. In particular, a higher respiration rate, measured as current density (j), was associated with slower growth and a lower net yield, compared to an ARB biofilm grown with a lower ammonium concentration (0.2 g TAN/L). Further increases in influent TAN (to 3 and then to 4.4 g TAN/L) caused nearly complete inhibition of anode respiration. However, the ARB could recover from high-TAN inhibition after a shift of the MXC's feed to 0.2 g TAN/L. In summary, ARB biofilms were inhibited by a high TAN concentration, but could divert more electron flow toward anode respiration with modest inhibition and recover when severe inhibition was relieved. Biotechnol. Bioeng. 2017;114: 1151-1159. © 2017 Wiley Periodicals, Inc.