A facile reaction to access novel structural sulfonyl-hybridized imidazolyl ethanols as potential DNA-targeting antibacterial agents.

A novel type of sulfonyl-hybridized imidazolyl ethanols as potential DNA-targeting antibacterial agents was constructed via the unique ring-opened reaction of oxiranes by imidazoles for the first time. Some developed target hybrids showed potential antimicrobial potency against the tested microbes. Especially, imidazole derivative 5f could strongly suppressed the growth of MRSA (MIC = 4 µg/mL), which was 2-fold and 16-fold more potent than the positive control sulfathiazole and norfloxacin. This compound exhibited quite low propensity to induce bacterial resistance. Antibacterial mechanism exploration indicated that compound 5f could embed in MRSA DNA to form steady 5f-DNA complex, which possibly hinder DNA replication to exert antimicrobial behavior. Molecular docking showed that molecule 5f could bind with dihydrofolate synthetase through hydrogen bonds. These results implied that imidazole derivative 5f could be served as a promising molecule for the exploration of novel antibacterial candidates.

Ecotoxicity of the Adipate Plasticizers: Influence of the Structure of the Alcohol Substituent.

A significant increase in the production of plastic materials and the expansion of their areas of application contributed to the accumulation of a large amount of waste of polymeric materials. Most of the polymer composition is made up of plasticizers. Phthalate plasticizers have been recognized as potentially hazardous to humans and the environment due to the long period of their biodegradation and the formation of persistent toxic metabolites. It is known that the industrial plasticizer dioctyl adipate is characterized by reduced toxicity and a short biodegradation period. The paper describes the synthesis of a number of new asymmetric esters based on adipic acid and ethoxylated butanol by azeotropic esterification. The receipt of the products was confirmed by IR spectra. The physicochemical properties of the synthesized compounds were investigated. The glass transition temperatures of PVC composites plasticized with alkyl butoxyethyl adipates were determined using DSC analysis. The ecological safety of esters was assessed by the phytotesting method. Samples of adipates were tested for fungal resistance, and the process of their biodegradation in soil was also studied. It is shown that the synthesized esters have good plasticizing properties and are environmentally safe. When utilized under natural conditions, they can serve as a potential source of carbon for soil microorganisms and do not form stable toxic metabolites; therefore, they are not able to accumulate in nature; when the plasticizers under study are disposed of in the soil, toxic substances do not enter.

Ethanol-assisted kneading of apigenin with arginine for enhanced dissolution rate of apigenin: development of rapidly disintegrating tablets.

Apigenin is a natural flavonoid which is claimed to have many pharmacological activities ranging from simple anti-inflammatory to anticancer action. However, poor dissolution slowed the advancement of this drug through the development pipelines. The objective of this work was to probe ethanol-aided kneading of apigenin with arginine as a new strategy for enhanced dissolution rate. The work was extended to develop rapidly disintegrating tablets of apigenin. Apigenin was mixed with increasing molar ratios of arginine before ethanol-aided kneading. The resulting products were examined using Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction in addition to probing the dissolution characteristics of apigenin. The analytical techniques highlighted the existence of new crystalline species with a possibility of salt formation. The recorded alterations in the crystalline properties were associated with a significant enhancement in the dissolution rate of apigenin. The presence of arginine did not have any negative effect of the cytotoxic power of apigenin. Optimum formulation was successfully prepared as rapidly disintegrating tablets which showed fast liberation of apigenin. The study introduced arginine as a potential excipient for enhanced dissolution of apigenin after ethanol-assisted kneading.

Ethanol: Unlocking an Abundant Renewable C2 -Feedstock for Catalytic Enantioselective C-C Coupling.

With annual production at >85 million tons/year, ethanol is the world's largest-volume renewable small molecule carbon source, yet its use as a C2 -feedstock in enantioselective C-C coupling is unknown. Here, the first catalytic enantioselective C-C couplings of ethanol are demonstrated in reactions with structurally complex, nitrogen-rich allylic acetates incorporating the top 10 N-heterocycles found in FDA-approved drugs.

Designing Efficient Processes for Sustainable Bioethanol and Bio-Hydrogen Production from Grass Lawn Waste.

The effect of thermal, acid and alkali pretreatment methods on biological hydrogen (BHP) and bioethanol production (BP) from grass lawn (GL) waste was investigated, under different process schemes. BHP from the whole pretreatment slurry of GL was performed through mixed microbial cultures in simultaneous saccharification and fermentation (SSF) mode, while BP was carried out through the C5yeast Pichia stipitis, in SSF mode. From these experiments, the best pretreatment conditions were determined and the efficiencies for each process were assessed and compared, when using either the whole pretreatment slurry or the separated fractions (solid and liquid), the separate hydrolysis and fermentation (SHF) or SSF mode, and especially for BP, the use of other yeasts such as Pachysolen tannophilus or Saccharomyces cerevisiae. The experimental results showed that pretreatment with 10 gH2SO4/100 g total solids (TS) was the optimum for both BHP and BP. Separation of solid and liquid pretreated fractions led to the highest BHP (270.1 mL H2/g TS, corresponding to 3.4 MJ/kg TS) and also BP (108.8 mg ethanol/g TS, corresponding to 2.9 MJ/kg TS) yields. The latter was achieved by using P. stipitis for the fermentation of the hydrolysate and S. serevisiae for the solid fraction fermentation, at SSF.

Immobilization of invertase in calcium alginate and calcium alginate-kappa-carrageenan beads and its application in bioethanol production.

Invertase from Saccharomyces cerevisiae was entrapped in Ca-alginate and Ca-alginate-kappa-carrageenan matrix. Optimum pH for the free and immobilized invertase was found to be 4.5 and 5.5, respectively. The optimum hydrolysis temperature was 55 °C for both the free and immobilized forms. Km values for free invertase and invertase entrapped in Ca-alginate and Ca-alginate-kappa-carrageenan beads were 15, 21, and 19 mM, respectively. Values of Vmax for free invertase and invertase entrapped in Ca-alginate and Ca-alginate-kappa-carrageenan beads were 238, 186, and 197 mM min-1, respectively. Invertase entrapped in Ca-alginate-kappa-carrageenan matrix had the highest pH and thermal stability, higher reusability with 71% retention in activity after nine batches of reuse and higher storage stability with 86% activity retention after 12 weeks at 4 °C, pH 4.5. Fermentation of cane molasses by yeast for bioethanol formation in the presence of free invertase at 30 °C, pH 5.0, led to an increase in ethanol production by 3%. However, the production increased by 9% when invertase entrapped in Ca-alginate-kappa-carrageenan was used as a catalyst.HighlightsInvertase from Saccharomyces cerevisiae was entrapped in Ca-alginate beads.For efficient encapsulation of invertase, kappa-carrageenan was used in combination with alginate as a matrix.Entrapment in Ca-alginate-kappa-carrageenan increased pH and thermal stability of invertase.Invertase entrapped in Ca-alginate-kappa-carrageenan was used for bioethanol production from cane molasses.

Use of cellulose acetate butyrate as a carrier for preparation of alcohol-resistant matrix tablet.

The objective of this study was to investigate cellulose acetate butyrate (CAB) as a carrier for extended-release alcohol-resistant matrix tablet. Powder blends were either directly compressed or granulated before compression. The drug release from CAB matrix tablet was robust to formulation/process parameters such as compression force (10-20 kN), granular size (0.15-1.40 mm), and drug content (50-70%). In addition, release medium variables such as ionic strength, pH, and agitation rate had no effect on the drug release. CAB matrix tablet was more robust than ethylcellulose matrix tablet; the release from CAB matrix tablet was not affected by ethanol content (up to 20% v/v) in the release medium irrespective of agitation. CAB is a promising polymer for formulating of alcohol-resistant extended-release matrix tablet.

Green synthesis of enantiopure (S)-1-(benzofuran-2-yl)ethanol by whole-cell biocatalyst.

Optically active aromatic alcohols are valuable chiral building blocks of many natural products and chiral drugs. Lactobacillus paracasei BD87E6, which was isolated from a cereal-based fermented beverage, was shown as a biocatalyst for the bioreduction of 1-(benzofuran-2-yl) ethanone to (S)-1-(benzofuran-2-yl) ethanol with highly stereoselectivity. The bioreduction conditions were optimized using L. paracasei BD87E6 to obtain high enantiomeric excess (ee) and conversion. After optimization of the bioreduction conditions, it was shown that the bioreduction of 1-(benzofuran-2-yl)ethanone was performed in mild reaction conditions. The asymmetric bioreduction of the 1-(benzofuran-2-yl)ethanone had reached 92% yield with ee of higher than 99.9% at 6.73 g of substrate. Our study gave the first example for enantiopure production of (S)-1-(benzofuran-2-yl)ethanol by a biological green method. This process is also scalable and has potential in application. In this study, a basic and novel whole-cell mediated biocatalytic method was performed for the enantiopure production of (S)-1-(benzofuran-2-yl)ethanol in the aqueous medium, which empowered the synthesis of a precious chiral intermediary process to be converted into a sophisticated molecule for drug production.

Minimalist approach meets green chemistry: Synthesis of 18 F- labeled (hetero)aromatics in pure ethanol.

The application of toxic solvents and additives is inevitable for most of the described protocols for 18 F-labeling. Herein, a novel "green" procedure for nucleophilic aromatic radiofluorination of highly activated (hetero)aromatic substrates in pure EtOH is described. Using this method a series of 18 F-labeled (hetero)arenes have been synthesized in radiochemical yields (RCYs) of up to 97%.

Transfection efficiencies of α-tocopherylated cationic gemini lipids with hydroxyethyl bearing headgroups under high serum conditions.

Herein, five new α-tocopheryl cationic gemini lipids with hydroxyethyl bearing headgroups (THnS, n = 4, 5, 6, 8, 12) have been synthesized for efficient plasmid DNA (pDNA) delivery into cancer cells. Among these gemini lipid formulations, the lipid with an octamethylene [-(CH2)8] spacer (TH8S) showed the highest transfection efficiency (TE) that was comparable to that of the commercial standard lipofectamine 2000 (L2K) in terms of luciferase expression in HepG2 (liver hepatocellular carcinoma) cells. The addition of the helper lipid DOPE (1,2-dioleoyl phosphatidyl ethanolamine) with cationic lipids in mixed liposomes further enhanced the TE and the optimized molar ratio was 2 : 1 (DOPE : cationic lipid). The optimized co-liposomal formulation of TH8S (DOPE : TH8S = 2 : 1) showed a higher TE in HepG2, A549 (human lung carcinoma) and MCF7 (human breast adenocarcinoma) cells than other optimized co-liposomal formulations and was also significantly more potent than L2K. The comparison of the TE of DOPE-TH8S (2 : 1) with the gemini lipid T8T (the headgroup devoid of the hydroxyl group) further demonstrated the importance of the hydroxyethyl functionality at the level of the headgroup. Relatively good binding efficiency and easy release of pDNA (pGL3) were also observed with DOPE-TH8S (2 : 1) in the ethidium bromide (EB)-exclusion and re-intercalation assay, which may be the plausible reason for high TE. The lipoplexes were also characterized by atomic force microscopy (AFM), dynamic light scattering (DLS), zeta potential and small angle X-ray diffraction experiments. Greater cellular internalization of fluorescein tagged pDNA was also observed with DOPE-TH8S (2 : 1) lipoplexes compared to that with L2K. Retention of the TE of DOPE-TH8S (2 : 1) lipoplexes under high serum conditions was conferred by the presence of the tocopherol backbone and also the hydroxyethyl functionalities. The cellular internalization pathway of the lipoplexes was characterized by performing transfection experiment in the presence of inhibitors of different endocytic pathways and it was found to be caveolae mediated. An MTT based cell viability assay indicated that the lipoplex mediated gene delivery vectors exhibited low toxicity in all the three cancer cell lines studied.

Cytocompatible Fabrication of Yeast Cells/Fabrics Composite Sheet for Bioethanol Production.

Entrapment of living cells into a polymer network has significant potential in various fields such as biomass conversion and tissue engineering. A crucial challenge for this strategy is to provide a mild enough condition to preserve cell viability. Here, a facile and cytocompatible method to entrap living yeast cells into a poly(ethylene glycol) (PEG) network grafting from polypropylene nonwoven fabrics via visible-light-induced surface living graft crosslinking polymerization is reported. Due to the mild reaction conditions and excellent biocompatibility of PEG, the immobilized yeast cells could maintain their viability and proliferate well. The obtained composite sheet has excellent long-term stability and shows no significant efficiency loss after 25 cycles of repeated batch bioethanol fermentation. The immobilized yeast cells exhibit 18.0% higher bioethanol fermentation efficiency than free cells. This strategy for immobilization of living cells with high viability has significant potential application.

Feeding a sustainable chemical industry: do we have the bioproducts cart before the feedstocks horse?

A sustainable chemical industry cannot exist at scale without both sustainable feedstocks and feedstock supply chains to provide the raw materials. However, most current research focus is on producing the sustainable chemicals and materials. Little attention is given to how and by whom sustainable feedstocks will be supplied. In effect, we have put the bioproducts cart before the sustainable feedstocks horse. For example, bulky, unstable, non-commodity feedstocks such as crop residues probably cannot supply a large-scale sustainable industry. Likewise, those who manage land to produce feedstocks must benefit significantly from feedstock production, otherwise they will not participate in this industry and it will never grow. However, given real markets that properly reward farmers, demand for sustainable bioproducts and bioenergy can drive the adoption of more sustainable agricultural and forestry practices, providing many societal "win-win" opportunities. Three case studies are presented to show how this "win-win" process might unfold.

Single mutations of ketoreductase ChKRED20 enhance the bioreductive production of (1S)-2-chloro-1-(3, 4-difluorophenyl) ethanol.

(1S)-2-chloro-1-(3, 4-difluorophenyl) ethanol ((S)-CFPL) is an intermediate for the drug ticagrelor, and is manufactured via chemical approaches. To develop a biocatalytic solution to (S)-CFPL, an inventory of ketoreductases from Chryseobacterium sp. CA49 were rescreened, and ChKRED20 was found to catalyze the reduction of the ketone precursor with excellent stereoselectivity (>99 % ee). After screening an error-prone PCR library of the wild-type ChKRED20, two mutants, each bearing a single amino acid substitution of H145L or L205M, were identified with significantly increased activity. Then, the two critical positions were each randomized by constructing saturation mutagenesis libraries, which delivered several mutants with further enhanced activity. Among them, the mutant L205A was the best performer with a specific activity of 178 µmol/min/mg, ten times of that of the wild-type. Its k cat/K m increased by 15 times and half-life at 50 °C increased by 70 %. The mutant catalyzed the complete conversion of 150 and 200 g/l substrate within 6 and 20 h, respectively, to yield enantiopure (S)-CFPL with an isolated yield of 95 %.

Identification of stable fly attractant compounds in vinasse, a byproduct of sugarcane-ethanol distillation.

The stable fly, Stomoxys calcitrans (Diptera: Muscidae), is a worldwide pest of livestock. Recent outbreaks of stable flies in sugarcane fields in Brazil have become a serious problem for livestock producers. Larvae and pupae found inside sugarcane stems after harvesting may indicate that stable flies use these stems as potential oviposition or larval development sites. Field observations suggest that outbreaks of stable flies are associated with the vinasse and filter cake derived from biomass distillation in sugarcane ethanol production that are used as fertilizers in sugarcane fields. Adult stable flies are attracted to vinasse, which appears to present an ideal larval development site. The primary goal of the present study is to demonstrate the role of vinasse in influencing the sensory physiological and behavioural responses of stable flies, and to identify its associated volatile attractant compounds. Both laboratory and field studies showed that vinasse is extremely attractive to adult stable flies. Chemical analyses of volatiles collected revealed a wide range of carboxylic acids, alcohols, phenols and aldehydes as potential attractant compounds. These newly identified attractants could be used to develop a tool for the attractant-baited mass trapping of stable flies in order to reduce infestations.

Physicochemical characterization, modelling and optimization of ultrasono-assisted acid pretreatment of two Pennisetum sp. using Taguchi and artificial neural networking for enhanced delignification.

Acid as well as ultrasono-assisted acid pretreatment of lignocellulosic biomass of two Pennisetum sp.; Denanath grass (DG) and Hybrid Napier grass (HNG) have been investigated for enhanced delignification and maximum exposure of cellulose for production of bioethanol. Screening of pretreatment with different acids such as H2SO4, HCl, H3PO4 and H2NO3 were optimized for different temperature, soaking time and acid concentrations using Taguchi orthogonal array and the data obtained were statistically validated using artificial neural networking. HCl was found to be the most effective acid for pretreatment of both the Pennisetum sp. The optimized conditions of HCl pretreatment were acid concentration of 1% and 1.5%, soaking time 130 and 50 min and temperature 121 °C and 110 °C which yielded maximum delignification of 33.0% and 33.8% for DG and HNG respectively. Further ultrosono-assisted HCl pretreatment with a power supply of 100 W, temperature of 353 K, and duty cycle of 70% has resulted in significantly higher delignification of 80.4% and 82.1% for both DG and HNG respectively than that of acid pretreatment. Investigation using SEM, FTIR and autofloresence microscopy for both acid and ultrasono-assisted acid pretreatment lignocellulosic biomass revealed conformational changes of pretreated lignocellulosic biomass with decreased lignin content and increased exposure of cellulose, with greater effectiveness in case of ultrasono assisted acid pretreatment condition.

Mechanism of Oxidation of Ethane to Ethanol at Iron(IV)-Oxo Sites in Magnesium-Diluted Fe2(dobdc).

The catalytic properties of the metal-organic framework Fe2(dobdc), containing open Fe(II) sites, include hydroxylation of phenol by pure Fe2(dobdc) and hydroxylation of ethane by its magnesium-diluted analogue, Fe0.1Mg1.9(dobdc). In earlier work, the latter reaction was proposed to occur through a redox mechanism involving the generation of an iron(IV)-oxo species, which is an intermediate that is also observed or postulated (depending on the case) in some heme and nonheme enzymes and their model complexes. In the present work, we present a detailed mechanism by which the catalytic material, Fe0.1Mg1.9(dobdc), activates the strong C-H bonds of ethane. Kohn-Sham density functional and multireference wave function calculations have been performed to characterize the electronic structure of key species. We show that the catalytic nonheme-Fe hydroxylation of the strong C-H bond of ethane proceeds by a quintet single-state σ-attack pathway after the formation of highly reactive iron-oxo intermediate. The mechanistic pathway involves three key transition states, with the highest activation barrier for the transfer of oxygen from N2O to the Fe(II) center. The uncatalyzed reaction, where nitrous oxide directly oxidizes ethane to ethanol is found to have an activation barrier of 280 kJ/mol, in contrast to 82 kJ/mol for the slowest step in the iron(IV)-oxo catalytic mechanism. The energetics of the C-H bond activation steps of ethane and methane are also compared. Dehydrogenation and dissociation pathways that can compete with the formation of ethanol were shown to involve higher barriers than the hydroxylation pathway.

New Wind in Old Sails: Novel Applications of Triphos-based Transition Metal Complexes as Homogeneous Catalysts for Small Molecules and Renewables Activation.

Recent developments in the coordination chemistry and applications of Ru-triphos [triphos = 1,1,1-tris-(diphenylphosphinomethyl)ethane] systems are reviewed, highlighting their role as active and selective homogenous catalysts for small molecule activation, biomass conversions and in carbon dioxide utilization-related processes.

[Distiller Yeasts Producing Antibacterial Peptides].

A new method of controlling lactic acid bacteria contamination was developed with the use of recombinant Saccharomyces cerevisiae strains producing antibacterial peptides. Genes encoding the antibacterial peptides pediocin and plantaricin with codons preferable for S. cerevisiae were synthesized, and a system was constructed for their secretory expression. Recombinant S. cerevisiae strains producing antibacterial peptides effectively inhibit the growth of Lactobacillus sakei, Pediacoccus pentasaceus, Pediacoccus acidilactici, etc. The application of distiller yeasts producing antibacterial peptides enhances the ethanol yield in cases of bacterial contamination. Recombinant yeasts producing the antibacterial peptides pediocin and plantaricin can successfully substitute the available industrial yeast strains upon ethanol production.