The relative patient costs and availability of dental services, materials and equipment in public oral care facilities in Tanzania.

BACKGROUND: Patient charges and availability of dental services influence utilization of dental services. There is little available information on the cost of dental services and availability of materials and equipment in public dental facilities in Africa. This study aimed to determine the relative cost and availability of dental services, materials and equipment in public oral care facilities in Tanzania. The local factors affecting availability were also studied. METHODS: A survey of all district and regional dental clinics in selected regions was conducted in 2014. A total of 28/30 facilities participated in the study. A structured interview was undertaken amongst practitioners and clinic managers within the facilities. Daily resources for consumption (DRC) were used for estimation of patients' relative cost. DRC are the quantified average financial resources required for an adult Tanzanian's overall consumption per day. RESULTS: Tooth extractions were found to cost four times the DRC whereas restorations were 9-10 times the DRC. Studied facilities provided tooth extractions (100%), scaling (86%), fillings (79%), root canal treatment (46%) and fabrication of removable partial dentures (32%). The ratio of tooth fillings to extractions in the facilities was 1:16. Less than 50% of the facilities had any of the investigated dental materials consistently available throughout the year, and just three facilities had all the investigated equipment functional and in use. CONCLUSIONS: Dental materials and equipment availability, skills of the practitioners and the cost of services all play major roles in provision and utilization of comprehensive oral care. These factors are likely to be interlinked and should be taken into consideration when studying any of the factors individually.

Hybrid materials offer new perspectives.

Dental materials, especially in restorative dentistry, must not only be cost-effective, they must also meet many other requirements: biocompatibility, durability, excellent shade and light effects, abrasion resistance, hardness, mechanical strength under pressure, chemical resistance, surface density, ease of manufacture, and easy intraoral maintenance.

Technique Tips--The Cost of One Post-Operative Sensitivity following Placement of a Posterior Composite Restoration.

Use a low shrinkage stress composite but, if not, use incremental placement and a layer of flowable at the gingival box; Ensure good bonding to dentine and enamel and avoid (over) etching the dentine; Ensure good adaptation at the gingival floor of a Class II box; Make sure that the restoration has received sufficient light; Provide good isolation; Use reliable and tested materials throughout.

Standards, Regulation and Registration of Dental Laboratories. An Industry Update.

State dental associations are showing increased interest in maintaining current standards and regulations affecting the dental laboratory industry as mandated by the Food and Drug Administration. The domestic dental laboratory industry is being significantly stressed by foreign competition, rapid technology development and unprecedented consolidation, which are changing the way that prosthetic devices and restorations are manufactured and delivered to dentists. Of paramount importance to the prescribing dentist is the accurate documentation of the source and materials being used in prostheses being delivered to patients.

A cost-minimization analysis of an RCT of three retention methods.

BACKGROUND: There are few cost evaluation studies of orthodontic retention treatment. The aim of this study was to compare the costs in a randomized controlled trial of three retention methods during 2 years of retention treatment. MATERIALS/METHODS: To determine which alternative has the lower cost, a cost-minimization analysis (CMA) was undertaken, based on that the outcome of the treatment alternatives was equivalent. The study comprised 75 patients in 3 groups consisting of 25 each. The first group had a vacuum-formed retainer (VFR) in the maxilla and a cuspid retainer in the mandible (group V-CTC), the second group had a VFR in the maxilla combined with stripping of the incisors and cuspids in the mandible (group V-S), and the third group had a prefabricated positioner (group P). Direct cost (premises, staff salaries, material and laboratory costs) and indirect costs (loss of time at school) were calculated. Societal costs were defined as the sum of direct and indirect costs. RESULTS: The societal costs/patient for scheduled appointments for 2 years of retention treatment in group V-CTC were €497, group V-S €451 and group P €420. Societal costs for unscheduled appointments in group V-CTC were €807 and in group V-S €303. In group P, there were no unscheduled appointments. CONCLUSIONS/IMPLICATIONS: After 2 years of retention in compliant patients, the cuspid retainer was the least cost-effective retention appliance. The CMA showed that for a clinically similar result, there were differences in societal costs, but treatment decisions should always be performed on an individual basis.

A randomized trial on simplified and conventional methods for complete denture fabrication: cost analysis.

PURPOSE: This study aimed to quantify the costs of complete denture fabrication by a simplified method compared with a conventional protocol. MATERIALS AND METHODS: A sample of edentulous patients needing conventional maxillary and mandibular complete dentures was randomly divided into group S, which received dentures fabricated by a simplified method, and group C, which received conventionally fabricated dentures. We calculated direct and indirect costs for each participant including unscheduled procedures. This study assessed 19 and 20 participants allocated into groups S and C, respectively, and comparisons between groups were conducted by the Mann-Whitney and Student's t-test (α = 0.05). RESULTS: Complete denture fabrication demanded median time periods of 173.2 and 284.5 minutes from the operator for groups S and C respectively, and 46.6 and 61.7 minutes from the dental assistant (significant differences, p < 0.05). There was no difference between groups regarding postinsertion adjustments. Group S showed lower values for costs with materials and time spent by patients than group C during the fabrication stage, but not during adjustments. CONCLUSIONS: The median direct cost of complete denture treatment was 34.9% lower for the simplified method. It can be concluded that the simplified method is less costly for patients and the health system when compared with a conventional protocol for the rehabilitation of edentulous patients.

Fixed prosthodontics provisional materials: making the right selection.

Clinicians have many choices when selecting an appropriate material for interim restorations for both single crowns and multi-units. Interim restorations serve as a diagnostic as well as biologic and biomechanical component of fixed prosthodontics treatment; in the anterior, they are also important in evaluating the esthetics for the definitive restoration. Factors to be considered when choosing provisional materials are physical properties, handling characteristics, patient response to the appearance of the interim restoration, durability of the restoration, and the cost of the material. Practitioners should, therefore, base their choice on the clinical needs for each situation.

Variations in caries diagnoses and treatment recommendations and their impacts on the costs of oral health care.

OBJECTIVE: To evaluate the reproducibility of caries detection and treatment planning among public health dentists and estimate the possible impact of their decisions on financial costs. RESEARCH DESIGN AND SETTINGS: Thirty nine dentists working in the public health service of Piracicaba, São Paulo, Brazil made a combined visual-radiographic caries examination of 40 occlusal surfaces of extracted permanent teeth mounted on two dental mannequins and proposed treatment plans for each tooth. Histological validation then evaluated the diagnoses validity and the suitability of the treatment plans. OUTCOME MEASURES: Inter-examiner agreement was calculated by Cohen's Kappa statistics. The sensitivity and specificity of caries detection and treatment decision were calculated. The costs of dental treatment plans for public health system were calculated from a Brazilian public health service fee scale. RESULTS: Inter-examiner agreement for caries detection was moderate (kappa = 0.42) while for treatment decisions it was fair (kappa = 0.29). The sensitivity and specificity were 0.69 and 0.65 for caries detection and 0.56 and 0.65 for treatment decision respectively. Dentists overestimated the presence and depth of carious lesions and there was a tendency to treat enamel lesions using invasive therapeutic procedures. Mean treatment cost across the two cases was 32US$ (range 9-65) while the histologically validated cost was 23US$. CONCLUSION: The variability in caries detection and treatment decision negatively affected the cost of the dental treatment.

Use of mineral trioxide aggregate (MTA by postgraduates in restorative dentistry in the UK.

All postgraduate trainees in Restorative Dentistry within the United Kingdom were contacted by e-mail and invited toparticipate in a structured on-line questionnaire regarding MTA usage. Responses were received from 46/65 (70.8%) postgraduate trainees. MTA was used by 15/46 (32.6%) trainees in the primary dentition and 46/46 (100%) in the permanent dentition. Barriers to the use of MTA in the permanent dentition related to material cost and in the primary dentition, the lack of an evidence base. Overall, 32/46 (69.6%) had received tuition during their postgraduate programme and 21/46 (45.7%) indicated an interest in further educational opportunities in material use.

Economic aspects of mandibular third molar surgery.

OBJECTIVE: The aim of this study was to make estimates from a dental care and societal perspective on costs of mandibular third molar surgery. MATERIAL AND METHODS: A total of 64 patients were recruited from three Swedish oral and maxillofacial specialist clinics. Calculations were made prospectively on utilization of labor time, specific medical services and materials, and standardized utilization of other direct costs. Indirect costs were identified from patient surveys. RESULTS: The base case average direct cost of surgery was 217 Euro. Adding the patient's average cost due to absence from work and transportation of 333 Euro increased overall costs to 550 Euro per patient. About 86% of the patients reported some absence following surgery. CONCLUSIONS: The indirect costs were on average higher than the direct costs, i.e. the patient's loss of time caused higher costs than the intervention per se. Appropriate indications for mandibular third molar removal can minimize the risks of complications and individual or societal costs.

Efficient resource use in simplified complete denture fabrication.

PURPOSE: Conventional dentures will remain the only treatment available to most edentulous people for the foreseeable future. In this study, we compared the efficiency of two methods of making complete conventional dentures-the traditional academic standard (T) and a simplified technique (S) used in private practice. We have previously shown that they produce similar levels of patient satisfaction and denture quality. MATERIALS AND METHODS: Data were gathered during a randomized controlled clinical trial of 122 subjects from initial examination until 6-month follow-up. For this report, the direct costs of providing one set of conventional complete dentures by T or S techniques were estimated. All materials used were recorded and their cost was calculated in Canadian dollars (CAN$). The costs of fabrication in an outside laboratory were added. Clinician's labor time was recorded for every procedure. Between-group comparisons for each clinical procedure were carried out with independent t-tests. The number of patients in each group who needed postdelivery treatment was compared with Chi-square tests. The effect of group assignment and of treatment difficulty on outcomes was analyzed with multiple regression analysis. RESULTS: The mean total cost of the T method was significantly greater than S (CAN$166.3; p < 0.001), and clinicians spent 90 minutes longer (p < 0.001) on clinical care. The difficulty of the case had no significant influence on outcomes. CONCLUSIONS: The results indicate that the S method is the more cost-efficient method and that there are no negative consequences that detract from the cost savings.

System dynamics modeling for tooth decay treatment in Brazilian children.

Prevention and health promotion are considered important strategies to control oral diseases. Dental caries is preventable disease and remains the most common chronic disease that affects mainly low income children and still considered the main cause of tooth loss in adulthood in Brazil. The aim of this study is to present a System Dynamics model (SDM) specifically developed with the Stella Architect software to estimate the cost and clinical hours required to control the evolution of dental caries in preschool children in Maringá, Brazil. Two main strategies to control caries were considered in the model: the application of fluoride varnish on teeth presenting white spots, and the use of Atraumatic Restorative Treatment (ART) in cavitated carious lesions without pulp involvement. The parameters used in the model were: number of people covered by a local oral health team = 4,000; number of children up to 5 years = 7% of the population; children's decayed, missing, filled teeth (dmft) index = 2.4; time/cost of 4 applications of fluoride varnish = 5 minutes/US$ 0.716; and time/cost of each ART restoration = 15 minutes/US$ 1.475. The SDM generated an estimated total cost of US$698.00, and a total of 112 clinical hours to treat the population in question. The use of the SDM presented here has the potential to assist decision making by measuring the material and human resources required to prevent and control dental caries at an early age.

Parental attitudes on restorative materials as factors influencing current use in pediatric dentistry.

PURPOSE: The purpose of this study was to determine pediatric dentists' current practices and the perceptions about parents' opinions and how those parental preferences regarding dental materials influence dentists' practices. METHODS: A questionnaire was sent to 500 randomly selected active members of the American Academy of Pediatric Dentistry. Twenty-five items queried demographics, use of restorative materials, perceptions of parents' attitudes towards materials, and dentists' reactions to parents' concerns. RESULTS: The survey response rate was 61%. Parental concerns about materials in decreasing order were: (1) esthetics; (2) cost; (3) toxicity; and (4) durability. Parents' greatest concerns about stainless steel crowns were: (1) esthetics; and (2) cost. Among respondents, 43% followed parental preferences when challenged, and 28% currently never use amalgam. Amalgam use and the dentists' perception of parental challenge were each related to the socioeconomic status of the practice population, with lower socioeconomic practices feeling less parental challenge than higher socioeconomic practices and being more likely to use amalgam than "white" filling materials (P = .001). CONCLUSIONS: Mercury concerns occur more frequently with higher than lower socioeconomic status parents (P = .002). Stainless steel crowns are challenged based on esthetics and cost. When confronted, many pediatric dentists (43%) follow parental preferences, even when that action is contrary to their initial clinical judgment.

Acrylic partial dentures--interim or permanent prostheses?

An acrylic partial denture (APD) is one option for replacing missing teeth and is also the most cost effective treatment option. Dentists are faced with the demand for replacing missing teeth from patients with limited financial resources; therefore the replacement of missingteeth with an APD is a common occurrence. One of the disadvantages of APD's is its poor strength. Dentists and dental technicians tend to design and construct acrylic partial dentures with little or no tooth support. This can have a detrimental effect on the surrounding hard as well as soft tissue. This article argues that APD's can be considered as a permanent prosthesis, provided that proper patient selection, education and the principles of partial denture design are adhered to.

Amalgam Alternatives: Cost-Effectiveness and Value of Information Analysis.

We aimed to assess the cost-effectiveness of amalgam alternatives-namely, incrementally placed composites (IComp), composites placed in bulk (BComp), and glass ionomer cements (GIC). In a sensitivity analysis, we also included composite inlays (CompI) and incrementally placed bulk-fills (IBComp). Moreover, the value of information (VOI) regarding the effectiveness of all strategies was determined. A mixed public-private-payer perspective in the context of Germany was adopted. Bayesian network meta-analyses were performed to yield effectiveness estimates (relative risk [RR] of failure). A 3-surfaced restoration on a permanent molar in initially 30-y-old patients was followed over patients' lifetime using a Markov model. Restorative and endodontic complications were modeled; our outcome parameter was the years of tooth retention. Costs were derived from insurance fee items. Monte Carlo microsimulations were used to estimate cost-effectiveness, cost-effectiveness acceptability, and VOI. Initially, BComp/GIC were less costly (110.11 euros) than IComp (146.82 euros) but also more prone to failures (RRs [95% credible intervals (CrI)] were 1.6 [0.8 to 3.4] for BComp and 1.3 [0.5 to 5.6] for GIC). When following patients over their lifetime, IComp was most effective (mean [SD], 41.9 [1] years) and least costly (2,076 [135] euros), hence dominating both BComp (40.5 [1] years; 2,284 [126] euros) and GIC (41.2 years; 2,177 [126] euros) in 90% of simulations. Eliminating the uncertainty around the effectiveness of the strategies was worth 3.99 euros per restoration, translating into annual economic savings of 87.8 million euros for payers. Including CompI and IBComp into our analyses had only a minimal impact, and our findings were robust in further sensitivity analyses. In conclusion, the initial savings by BComp/GIC compared with IComp are very likely to be compensated by the higher risk of failures and costs for retreatments. CompI and IBComp do not seem cost-effective. All alternatives are likely to be inferior to amalgam. The VOI was considerable, and future studies may yield significant economic benefits.