Gold nanoparticle biodistribution in pregnant mice following intravenous administration varies with gestational age.

The use of nanoparticles (NPs) to deliver therapeutics to reproductive organs is an emerging approach to safely and effectively treat mothers and babies facing pregnancy complications. This study investigates the biodistribution of two different sized gold-based NPs in pregnant mice following systemic delivery as a function of gestational age. Poly(ethylene glycol)-coated 15 nm gold nanoparticles or 150 nm diameter silica core/gold nanoshells were intravenously administered to pregnant mice at gestational days (E)9.5 or 14.5. NP distribution was analyzed twenty-four hours later by inductively coupled plasma-mass spectrometry and silver staining of histological specimens. More NPs accumulated in placentas than embryos and delivery to these tissues was greater at E9.5 than E14.5. Neither NP type affected fetal weight or placental weight, indicating minimal short-term toxicity in early to mid-stage pregnancy. These findings warrant continued development of NPs as tools to deliver therapeutics to reproductive tissues safely.

Dihydrolipoic acid-coated gold nanocluster bioactivity against senescence and inflammation through the mitochondria-mediated JNK/AP-1 pathway.

Cellular senescence is the progressive impairment of function and proliferation in response to various regulators. Dihydrolipoic acid-coated gold nanoclusters (DHLA-Au NCs), which are molecular clusters with covalently linked dihydroxyl lipoic acid, preserve cellular activities for long-term incubation. DHLA-Au NC delivery was characterized, and we determined the role of growth supplements on internalization, allowing the optimization of DHLA-Au NC bioactivity. In the optimized medium, DHLA-Au NCs attenuated the levels of the senescence-associated phenotype. Molecular mechanism analysis further indicated that during DHLA-Au NC treatment, the activation of the stress signal JNK and its downstream c-Jun were impaired under LPS induction, which led to a decline in AP-1-mediated TNF-α transactivation. Confocal microscopy and subcellular fractionation analysis suggested that DHLA-Au NCs interacted with mitochondria through their lipid moiety and attenuated mitochondria-derived reactive oxygen species. With adequate treatment, DHLA-Au NCs show protection against cellular senescence and inflammation in vitro and in vivo.

Enhanced model protein adsorption of nanoparticulate hydroxyapatite thin films on silk sericin and fibroin surfaces.

Hydroxyapatite coated metallic implants favorably combine the required biocompatibility with the mechanical properties. As an alternative to the industrial coating method of plasma spraying with inherently potential deleterious effects, sol-gel methods have attracted much attention. In this study, the effects of intermediate silk fibroin and silk sericin layers on the protein adsorption capacity of hydroxyapatite films formed by a particulate sol-gel method were determined experimentally. The preparation of the layered silk protein/hydroxyapatite structures on glass substrates, and the effects of the underlying silk proteins on the topography of the hydroxyapatite coatings were described. The topography of the hydroxyapatite layer fabricated on the silk sericin was such that the hydroxyapatite particles were oriented forming an oriented crystalline surface. The model protein (bovine serum albumin) adsorption increased to 2.62 µg/cm2 on the latter surface as compared to 1.37 µg/cm2 of hydroxyapatite on glass without an intermediate silk sericin layer. The BSA adsorption on glass (blank), glass/c-HAp, glass/m-HAp, glass/sericin/c-HAp, and glass/sericin/m-HAp substrates, reported as decrease in BSA concentration versus contact time.

Toward Tailoring the Degradation Rate of Magnesium-Based Biomaterials for Various Medical Applications: Assessing Corrosion, Cytocompatibility and Immunological Effects.

Magnesium (Mg)-based biomaterials hold considerable promise for applications in regenerative medicine. However, the degradation of Mg needs to be reduced to control toxicity caused by its rapid natural corrosion. In the process of developing new Mg alloys with various surface modifications, an efficient assessment of the relevant properties is essential. In the present study, a WE43 Mg alloy with a plasma electrolytic oxidation (PEO)-generated surface was investigated. Surface microstructure, hydrogen gas evolution in immersion tests and cytocompatibility were assessed. In addition, a novel in vitro immunological test using primary human lymphocytes was introduced. On PEO-treated WE43, a larger number of pores and microcracks, as well as increased roughness, were observed compared to untreated WE43. Hydrogen gas evolution after two weeks was reduced by 40.7% through PEO treatment, indicating a significantly reduced corrosion rate. In contrast to untreated WE43, PEO-treated WE43 exhibited excellent cytocompatibility. After incubation for three days, untreated WE43 killed over 90% of lymphocytes while more than 80% of the cells were still vital after incubation with the PEO-treated WE43. PEO-treated WE43 slightly stimulated the activation, proliferation and toxin (perforin and granzyme B) expression of CD8+ T cells. This study demonstrates that the combined assessment of corrosion, cytocompatibility and immunological effects on primary human lymphocytes provide a comprehensive and effective procedure for characterizing Mg variants with tailorable degradation and other features. PEO-treated WE43 is a promising candidate for further development as a degradable biomaterial.

The Formation of Chitosan-Coated Rhamnolipid Liposomes Containing Curcumin: Stability and In Vitro Digestion.

There is growing interest in developing biomaterial-coated liposome delivery systems to improve the stability and bioavailability of curcumin, which is a hydrophobic nutraceutical claimed to have several health benefits. The curcumin-loaded rhamnolipid liposomes (Cur-RL-Lips) were fabricated from rhamnolipid and phospholipids, and then chitosan (CS) covered the surface of Cur-RL-Lips by electrostatic interaction to form CS-coated Cur-RL-Lips. The influence of CS concentration on the physical stability and digestion of the liposomes was investigated. The CS-coated Cur-RL-Lips with RL:CS = 1:1 have a relatively small size (412.9 nm) and positive charge (19.7 mV). The CS-coated Cur-RL-Lips remained stable from pH 2 to 5 at room temperature and can effectively slow the degradation of curcumin at 80 °C; however, they were highly unstable to salt addition. In addition, compared with Cur-RL-Lips, the bioavailability of curcumin in CS-coated Cur-RL-Lips was relatively high due to its high transformation in gastrointestinal tract. These results may facilitate the design of a more efficacious liposomal delivery system that enhances the stability and bioavailability of curcumin in nutraceutical-loaded functional foods and beverages.

Effects of oxygen generating scaffolds on cell survival and functional recovery following acute spinal cord injury in rats.

Persistent local oxygen delivery is crucial to create a microenvironment for cell survival and nerve regeneration in acute spinal cord injury (SCI). This study aimed to fabricate calcium peroxide-based microspheres incorporated into a 3-D construct scaffold as a novel oxygen release therapy for SCI. The scaffolds were able to generate oxygen over the course of 21 days when incubated under hypoxic conditions. In vitro, GFP-labeled bone marrow-derived mesenchymal stem cells (MSCs) were planted into the scaffolds. We observed that scaffolds could enhance MSC survival under hypoxic conditions for more than 21 days. Oxygen generating scaffolds were transplanted into spinal cord injury sites of rats in vivo. Twelve weeks following transplantation, cavity areas in the injury/graft site were significantly reduced due to tissue regeneration. Additionally, the oxygen generating scaffolds improved revascularization as observed through vWF immunostaining. A striking feature was the occurrence of nerve fiber regeneration in the lesion sites, which eventually led to significant locomotion recovery. The present results indicate that the oxygen generating scaffolds have the property of sustained local oxygen release, thus facilitating regeneration in injured spinal cords.

Preparation, Characterization and Antioxidant Activities of Kelp Phlorotannin Nanoparticles.

Phlorotannins are a group of major polyphenol secondary metabolites found only in brown algae and are known for their bioactivities and multiple health benefits. However, they can be oxidized due to external factors and their bioavailability is low due to their low water solubility. In this study, the potential of utilizing nanoencapsulation with polyvinylpyrrolidone (PVP) to improve various activities of phlorotannins was explored. Phlorotannins encapsulated by PVP nanoparticles (PPNPS) with different loading ratios were prepared for characterization. Then, the PPNPS were evaluated for in vitro controlled release of phlorotannin, toxicity and antioxidant activities at the ratio of phlorotannin to PVP 1:8. The results indicated that the PPNPS showed a slow and sustained kinetic release of phlorotannin in simulated gastrointestinal fluids, they were non-toxic to HaCaT keratinocytes and they could reduce the generation of endogenous reactive oxygen species (ROS). Therefore, PPNPS have the potential to be a useful platform for the utilization of phlorotannin in both pharmaceutical and cosmetics industries.

Complement Activation by PEGylated Gold Nanoparticles.

Gold nanoparticles (AuNPs) are widely used in biomedical applications, but much less is known about their immunological properties, particularly their interaction with the complement system, a key component of innate immunity serving as an indicator of their biocompatibility. Using a library of different-sized AuNPs (10, 20, 40, and 80 nm) passivated with polyethylene glycol (PEG) of different molecular weight ( Mw = 1, 2, 5, and 10 kDa), we demonstrated that citrate-capped AuNPs activated the whole complement system in a size-dependent manner, characterized by the formation of the end-point activation product, SC5b-9, in human serum. Although PEGylation of AuNPs mitigated, but did not abolish, the activation level, complement activation by PEGylated AuNPs was independent of both the core size of AuNPs and the molecular weight of PEG. The cellular uptake of both citrate-capped and PEGylated AuNPs by human U937 promonocytic cells which expresses complement receptors were highly correlated to the level of complement activation. Taken together, our results provided new insights on the innate complement activation by PEGylated AuNPs that are widely considered to be inert biocompatible nanomaterials.

Nanocarrier Composed of Magnetite Core Coated with Three Polymeric Shells Mediates LCS-1 Delivery for Synthetic Lethal Therapy of BLM-Defective Colorectal Cancer Cells.

Synthetic lethality is a molecular-targeted therapy for selective killing of cancer cells. We exploited a lethal interaction between superoxide dismutase 1 inhibition and Bloom syndrome gene product (BLM) defect for the treatment of colorectal cancer (CRC) cells (HCT 116) with a customized lung cancer screen-1-loaded nanocarrier (LCS-1-NC). The drug LCS-1 has poor aqueous solubility. To overcome its limitations, a customized NC, composed of a magnetite core coated with three polymeric shells, namely, aminocellulose (AC), branched poly(amidoamine), and paraben-PEG, was developed for encapsulating LCS-1. Encapsulation efficiency and drug loading were found to be 74% and 8.2%, respectively. LCS-1-NC exhibited sustained release, with ∼85% of drug release in 24 h. Blank NC (0.5 mg/mL) exhibited cytocompatibility toward normal cells, mainly due to the AC layer. LCS-1-NC demonstrated high killing selectivity (104 times) toward BLM-deficient HCT 116 cells over BLM-proficient HCT 116 cells. Due to enhanced efficacy of the drug using NC, the sensitivity difference for BLM-deficient cells increased to 1.7 times in comparison to that with free LCS-1. LCS-1-NC induced persistent DNA damage and apoptosis, which demonstrates that LCS-1-NC effectively and preferentially killed BLM-deficient CRC cells. This is the first report on the development of a potential drug carrier to improve the therapeutic efficacy of LCS-1 for specific killing of CRC cells having BLM defects.

Poly-L-ornithine/fucoidan-coated calcium carbonate microparticles by layer-by-layer self-assembly technique for cancer theranostics.

Recently, the layer-by-layer (LbL) self-assembly technology has attracted the enormous interest of researchers in synthesizing various pharmaceutical dosage forms. Herewith, we designed a biocompatible drug delivery system containing the calcium carbonate microparticles (CaCO3 MPs) that coated with the alternatively charged polyelectrolytes, i.e., poly-L-ornithine (PLO)/fucoidan by LbL self-assembly process (LbL MPs). Upon coating with the polyelectrolytes, the mean particle size of MPs obtained from SEM observations increased from 1.91 to 2.03 µm, and the surface of LbL MPs was smoothened compared to naked CaCO3 MPs. In addition, the reversible zeta potential changes have confirmed the accomplishment of layer upon a layer assembly. To evaluate the efficiency of cancer therapeutics, we loaded doxorubicin (Dox) in the LbL MPs, which resulted in high (69.7%) drug encapsulation efficiency. The controlled release of Dox resulted in the significant antiproliferative efficiency in breast cancer cell line (MCF-7 cells), demonstrating the potential of applying this innovative drug delivery system in the biomedical field.

Investigating the performance of drug delivery system of fluconazole made of nano-micro fibers coated on cotton/polyester fabric.

Polymer-based drug delivery systems are suitable to optimize the therapeutic properties of drugs and to render them safer, more effective and reliable. Long-term or repeated use of oral administration of fluconazole for treating chronic candidiasis in the patient and partially abandoned treatment lead to the resistant strains of the fungus Candida albicans and severity of the disease. In this study, the use of nanofibers and microfibers containing fluconazole for local drug delivery to increase the efficiencies and reduce the side effects caused by taking the drug was studied. Morphology, microstructure and chemical composition of PVA nanofibers containing fluconazole were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). As well as, the DSC test was indicated presence of fluconazole in PVA fibrous mats. The rate of drug release was investigated by UV-Vis spectrophotometery and swelling technique. SEM images showed that the nanofibers with uniform structure without beads were produced. The mechanical properties of the pristine PVA nanofiber and fibrous mat containing drug were evaluated. The release of fluconazole from PVA nanofibers in pH of 7.4 and at 37 °C was investigated. The results presented that the drug release rate is dependent on the morphology and structure of PVA nanofibers and could be adjusted in desired dosage. The presented products are applicable in the high production form for medical textile industry.

Surface changes of nanotopography by carbon ion implantation to enhance the biocompatibility of silicone rubber: an in vitro study of the optimum ion fluence and adsorbed protein.

Lower cellular adhesion and dense fibrous capsule formation around silicone breast implants caused by lower biocompatibility is a serious clinical problem. Preliminary work has shown that ion implantation enhances cell adhesion. Whether the biocompatibility is further enhanced by higher doses of carbon ion implantation and the mechanism by which ion implantation enhances biocompatibility remain unclear. In this study, five doses of carbon ions, which gradually increase, were implanted on the surface of silicone rubber and then the surface characteristics were surveyed. Then, cell adhesion, proliferation and migration were investigated. Furthermore, the vitronectin (VN) protein was used as a model protein to investigate whether the ion implantation affected the adsorbed protein on the surface. The obtained results indicate that enhanced cytocompatibility is dose dependent when the doses of ion implantation are less than 1 × 1016 ions/cm2. However, when the doses of ion implantation are more than 1 × 1016 ions/cm2, enhanced cytocompatibility is not significant. In addition, surface physicochemical changes by ion implantation induced a conformational change of the adsorbed vitronectin protein that enhanced cytocompatibility. Together, these results suggest that the optimum value of carbon ion implantation in silicone rubber to enhance biocompatibility is 1 × 1016 ions/cm2, and ion implantation regulates conformational changes of adsorbed ECM proteins, such as VN, and mediates the expression of intracellular signals that enhance the biocompatibility of silicone rubber. The results herein provide new insights into the surface modification of implant polymer materials to enhance biocompatibility. It has potentially broad applications in the biomedical field.

A biodegradable gentamicin-hydroxyapatite-coating for infection prophylaxis in cementless hip prostheses.

A degradable, poly (lactic-co-glycolic acid) (PLGA), gentamicin-loaded prophylactic coating for hydroxyapatite (HA)-coated cementless hip prostheses is developed with similar antibacterial efficacy as offered by gentamicin-loaded cements for fixing traditional, cemented prostheses in bone. We describe the development pathway, from in vitro investigation of antibiotic release and antibacterial properties of this PLGA-gentamicin-HA-coating in different in vitro models to an evaluation of its efficacy in preventing implant-related infection in rabbits. Bone in-growth in the absence and presence of the coating was investigated in a canine model. The PLGA-gentamicin-HA-coating showed high-burst release, with antibacterial efficacy in agar-assays completely disappearing after 4 days, minimising risk of inducing antibiotic resistance. Gentamicin-sensitive and gentamicin-resistant staphylococci were killed by the antibiotic-loaded coating, in a simulated prosthesis-related interfacial gap. PLGA-gentamicin-HA-coatings prevented growth of bioluminescent staphylococci around a miniature-stem mounted in bacterially contaminated agar, as observed using bio-optical imaging. PLGA-gentamicin-HA-coated pins inserted in bacterially contaminated medullary canals in rabbits caused a statistically significant reduction in infection rates compared to HA-coated pins without gentamicin. Bone ingrowth to PLGA-gentamicin-HA-coated pins, in condylar defects of Beagle dogs was not impaired by the presence of the degradable, gentamicin-loaded coating. In conclusion, the PLGA-gentamicin-HA-coating constitutes an effective strategy for infection prophylaxis in cementless prostheses.

Human recombinant activated protein C-coated stent for the prevention of restenosis in porcine coronary arteries.

Activated protein C (APC), an endogenous protein, inhibits inflammation and thrombosis and interrupts the coagulation cascade. Here, we investigated the effect of human recombinant APC on the development of neointimal hyperplasia in porcine coronary arteries. Yukon Choice bare metal stents were coated with 2.6 µg APC/mm(2). Under general anesthesia, APC-coated and bare stents were implanted in the left anterior descending and circumflex coronary arteries of 10 domestic pigs. During the 4-week follow-up, animals were treated with dual antiplatelet therapy and neointimal hyperplasia was evaluated via histology. Scanning electron microscopy indicated successful but unequal coating of stents with APC; nearly complete drug release occurred within 4 h. Enzyme-linked immunosorbent assay revealed that intracoronary stent implantation rapidly increased the levels of monocyte chemoattractant protein-1, an effect that was inhibited by APC release from the coated stent. Fibrin deposition and adventitial inflammation were significantly decreased 1 month after implanting APC-coated stents versus bare stents, paralleled by significantly smaller neointimal area (0.98 ± 0.92 vs. 1.44 ± 0.91 mm(2), P = 0.028), higher lumen area (3.47 ± 0.94 vs. 3.06 ± 0.91 mm(2), P = 0.046), and lower stenosis area (22.2 ± 21.2% vs. 32.1 ± 20.1%, P = 0.034). Endothelialization was complete with APC-coated but not bare (90%) stents. P-selectin immunostaining revealed significantly fewer activated endothelial cells in the neointima in the APC group (4.6 ± 1.9 vs. 11.6 ± 4.1%, P < 0.001). Thus, short exposure of coronary arteries to APC reduced inflammatory responses, neointimal proliferation, and in-stent restenosis, offering a promising therapy to improve clinical outcomes of coronary stenting. However, coating stents with APC for prolonged, controlled drug release remains technically challenging.

Development and characterisation of a novel chitosan-coated antioxidant liposome containing both coenzyme Q10 and alpha-lipoic acid.

This article describes the physicochemical properties of chitosan-coated liposomes containing skin-protecting agents, coenzyme Q10 and alpha-lipoic acid (CCAL). CCAL had a spherical shell-core structure and liposomes inverted the surface charge from negative to positive after coating with chitosan. Compared with the uncoated liposome, CCAL had higher zeta potential, larger droplet size and long-term stability. Fourier transform infrared spectroscopy (FTIR) study showed that the driving force for chitosan coating the liposomes was enhanced via hydrogen bonding and ionic bond force between the chitosan and the alpha-lipoic acid. While the encapsulation efficiency (EE) of alpha-lipoic acid also increased by interacting with the chitosan shell. In vitro antioxidant activity study showed an excellent hydroxyl radical scavenging activity of CCAL. In vitro release study displayed a sustained drug release, and in vitro penetration studies promoted the accumulation of drugs in rabbit skin.

Surface tailoring of nanoparticles via mixed-charge monolayers and their biomedical applications.

The recent convergence of nanomaterials and medicine has provided an expanding horizon for people to achieve encouraging advances in many biomedical applications such as cancer diagnosis and therapy. However, to realize desirable functions in the rather complex biological systems, a suitable surface coating is greatly in need for nanoparticles (NPs), regardless of the species. In this review, a recently developed surface modification strategy is highlighted--mixed-charge monolayers--with an emphasis on the nanointerfaces of inorganic NPs. Two typical mixed-charge gold NPs (AuNPs) prepared from surface modifications with different combinations of oppositely charged alkanethiols are shown as detailed examples to discuss how the mixed-charge monolayer can help NPs meet the criteria for in vitro and in vivo biomedical applications, including those critical issues like colloidal stability, nonfouling properties, and smart responses (pH-sensitivity) for tumor targeting.

Insights into EPR effect versus lectin-mediated targeted delivery: biodegradable polycarbonate micellar nanoparticles with and without galactose surface decoration.

Polymeric micelles with and without galactose are synthesized to study liver targeting ability in an orthotopic HCC rat model. Micelles with galactose accumulate more in the healthy liver tissue instead of HCC, while micelles without galactose amass in HCC by the EPR effect. These micelles show great potential as drug delivery carriers to target either the liver or HCC.

Surface coating-dependent cytotoxicity and degradation of graphene derivatives: towards the design of non-toxic, degradable nano-graphene.

With the increasing interests of using graphene and its derivatives in the area of biomedicine, the systematic evaluation of their potential risks and impacts to biological systems is becoming critically important. In this work, we carefully study how surface coatings affect the cytotoxicity and extracellular biodegradation behaviors of graphene oxide (GO) and its derivatives. Although naked GO could induce significant toxicity to macrophages, coating those two-dimensional nanomaterials with biocompatible macromolecules such as polyethylene glycol (PEG) or bovine serum albumin (BSA) could greatly attenuate their toxicity, as independently evidenced by several different assay approaches. On the other hand, although GO can be gradually degraded through enzyme induced oxidization by horseradish peroxidase (HRP), both PEG and BSA coated GO or reduced GO (RGO) are rather resistant to HRP-induced biodegradation. In order to obtain biocompatible functionalized GO that can still undergo enzymatic degradation, we conjugate PEG to GO via a cleavable disulfide bond, obtaining GO-SS-PEG with negligible toxicity and considerable degradability, promising for further biomedical applications.

Artificial biomimicking matrix modifications of nanofibrous scaffolds by hE-cadherin-Fc fusion protein to promote human mesenchymal stem cells adhesion and proliferation.

Extracellular matrix (ECM) plays a fundamental role in regulating cell attachment, proliferation, migration and differentiation. Both synthetic and biologically derived materials have been explored as an ECM in regenerative medicine and tissue engineering. To biomimick the extracellular matrix, we combined the advantages of the biological properties of nanofibrous scaffolds and the fusion protein to apply for the culture of human mesenchymal stem cells in vitro. In this study, we fabricated well random-oriented/aligned nanofibrous scaffolds with PCL, modified with hE-cadherin-Fc fusion protein and studied the synergistic effect of the scaffolds. The random-oriented/aligned architecture was observed in the nanofibrous scaffolds by SEM. XPS and WCA measurements evidenced that hE-cadherin-Fc was successfully modified on the PCL nanofibrous scaffolds and hydrophilicity of the scaffolds was well improved after fusion protein coating. The hE-cadherin-Fc modified markedly promoted the adhesion and proliferation of hMSCs and guided hMSCs to a spindlier morphology compared with unmodified nanofibrous scaffolds. Furthermore, hMSCs on the hE-cadherin-Fc-coated nanofibrous scaffolds also had differentiation potential. These results suggested that the combination of PCL nanofibrous scaffolds and hE-cadherin-Fc fusion protein may be a promising artificial ECM for the behavior of hMSCs in vitro.

Monetite and brushite coated magnesium: in vivo and in vitro models for degradation analysis.

The use of magnesium (Mg) as a biodegradable metallic replacement of permanent orthopaedic materials is a current topic of interest and investigation. The appropriate biocompatibility, elastic modulus and mechanical properties of Mg recommend its suitability for bone fracture fixation. However, the degradation rates of Mg can be rapid and unpredictable resulting in mass hydrogen production and potential loss of mechanical integrity. Thus the application of calcium phosphate coatings has been considered as a means of improving the degradation properties of Mg. Brushite and monetite are utilized and their degradation properties (alongside uncoated Mg controls) are assessed in an in vivo subcutaneous environment and the findings compared to their in vitro degradation behaviour in immersion tests. The current findings suggest monetite coatings have significant degradation protective effects compared to brushite coatings in vivo. Furthermore, it is postulated that an in vitro immersion test may be used as a tentative predictor of in vivo subcutaneous degradation behavior of calcium phosphate coated and uncoated Mg.