Transient theory for scanning electrochemical microscopy of biological membrane transport: uncovering membrane-permeant interactions.

Scanning electrochemical microscopy (SECM) has emerged as a powerful method to quantitatively investigate the transport of molecules and ions across various biological membranes as represented by living cells. Advantageously, SECM allows for the in situ and non-destructive imaging and measurement of high membrane permeability under simple steady-state conditions, thereby facilitating quantitative data analysis. The SECM method, however, has not provided any information about the interactions of a transported species, i.e., a permeant, with a membrane through its components, e.g., lipids, channels, and carriers. Herein, we propose theoretically that SECM enables the quantitative investigation of membrane-permeant interactions by employing transient conditions. Specifically, we model the membrane-permeant interactions based on a Langmuir-type isotherm to define the strength and kinetics of the interactions as well as the concentration of interaction sites. Finite element simulation predicts that each of the three parameters uniquely affects the chronoamperometric current response of an SECM tip to a permeant. Significantly, this prediction implies that all three parameters are determinable from an experimental chronoamperometric response of the SECM tip. Complimentarily, the steady-state current response of the SECM tip yields the overall membrane permeability based on the combination of the three parameters. Interestingly, our simulation also reveals the optimum strength of membrane-permeant interactions to maximize the transient flux of the permeant from the membrane to the tip.

Mechanistic Assessment of Metabolic Interaction between Single Oral Commensal Cells by Scanning Electrochemical Microscopy.

The human oral microbiome heavily influences the status of oral and systemic diseases through different microbial compositions and complex signaling between microbes. Recent evidence suggests that investigation of interactions between oral microbes can be utilized to understand how stable communities are maintained and how they may preserve health. Herein, we investigate two highly abundant species in the human supragingival plaque, Streptococcus mitis and Corynebacterium matruchotii, to elucidate their real-time chemical communication in commensal harmony. Specifically, we apply nanoscale scanning electrochemical microscopy (SECM) using a submicropipet-supported interface between two immiscible electrolyte solutions as an SECM probe not only to image the permeability of S. mitis and C. matruchotii membranes to tetraethylammonium (TEA+) probe ions but also to real-time visualize the metabolic interaction between two microbes via lactate production/consumption at a single-cell level. The metabolic relationship between two strains is quantitatively assessed by determining (1) the passive permeability of both bacterial membranes of 2.4 × 10-4 cm/s to the free diffusion of TEA+, (2) 0.5 mM of the lactate concentration produced by a single S. mitis strain at a rate of 2.7 × 10-4 cm/s, and (3) a lactate oxidation rate ≥5.0 × 106 s-1 by an individual C. matruchotii strain. Significantly, this study, for the first time, describes a mechanism of in situ metabolic interaction between oral commensals at the single-cell level through quantitative analysis, which supports the observed in vivo spatial arrangements of these microbes.

Simultaneous Chemical Mapping of Live Biofilm Microenvironmental pH and Hydrogen Peroxide in Real Time with a Triple Scanning Electrochemical Microscopy Tip.

Dental plaque biofilm is a complex ecosystem. The distribution of microbial species in the biofilm is heavily influenced by local chemical interactions that result from diverse metabolic activities and the nature of the released molecules. As a relevant example, H2O2-producing bacteria can antagonize disease-associated bacteria, leading to the maintenance of a healthy oral microbiome. Herein, we report the development of a triple-sensor (redox, pH, and H2O2) scanning electrochemical microscopy (SECM) tip capable of simultaneously mapping the pH and H2O2 concentration produced by a dental plaque-derived multispecies biofilm grown on hydroxyapatite. The pH sensor of the triple SECM tip showed a near Nernstian slope of -71.1 ± 2 mV/pH (N = 3), whereas the H2O2 sensor showed a slope of -0.052 ± 0.002 nA/µM H2O2 at pH 7.2 and a detection limit of 1.0 ± 0.2 µM (N = 7). There is no significant difference in the sensitivities of H2O2 sensors at pH 6.2, 7.2, and 8.2 at 95% CI (N = 7). The pH and H2O2 sensors demonstrated excellent reversibility with response times of 3 and 5 s, respectively, along with reliable stability over 4 h at 37 °C. The sensors did not show any cross talk between pH and H2O2 concentration ([H2O2]) measurements, highlighting the accuracy and versatility of the SECM tip. Simultaneous chemical imaging of pH and [H2O2] across the biofilm revealed a clustered distribution of local H2O2 concentrations, ranging from 0 to 17 µM. Conversely, the local pH remained constant at 7.2. The relation of local chemical profiles and the distribution of bacterial species within the oral microbiome was experimentally investigated in the context of bacterial H2O2 antagonism. The benefit of clustered H2O2 production was that the total area of H2O2 produced by smaller clusters was 67% more than that of a single cluster with the same starting number of bacteria. Thus, this triple SECM tip can potentially be used to study local molecular mechanisms that result in dysbiosis of the oral microbiome.

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level.

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 µm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.

High-Speed SICM for the Visualization of Nanoscale Dynamic Structural Changes in Hippocampal Neurons.

Dynamic reassembly of the cytoskeleton and structural changes represented by dendritic spines, cargo transport, and synapse formation are closely related to memory. However, the visualization of the nanoscale topography is challenging because of the diffraction limit of optical microscopy. Scanning ion conductance microscopy (SICM) is an effective tool for visualizing the nanoscale topography changes of the cell surface without labeling. The temporal resolution of SICM is a critical issue of live-cell time-lapse imaging. Here, we developed a new scanning method, automation region of interest (AR)-mode SICM, to select the next imaging region by predicting the location of a cell, thus improving the scanning speed of time-lapse imaging. The newly developed algorithm reduced the scanning time by half. The time-lapse images provided not only novel information about nanoscale structural changes but also quantitative information on the dendritic spine and synaptic bouton volume changes and formation process of the neural network that are closely related to memory. Furthermore, translocation of plasmalemmal precursor vesicles (ppvs), for which fluorescent labeling has not been established, were also visualized along with the rearrangement of the cytoskeleton at the growth cone.

Electrochemical detection of neuronal extracellular phosphorylation by PKA, PKC and Src.

The focus of this work described here is to establish a method for monitoring and quantifying the extracellular phosphorylation of Human SHSY5Y undifferentiated neuronal cells by three ectokinases PKA, PKC and Src; these are kinases that are known to be present in the extracellular matrix. Here is demonstrated that a combination of different experimental techniques, including microscopy and electrochemistry, can be used to detect extracellular phosphorylations. Phosphorylation profiles of the three ectokinases, PKA, PKC and Src, were investigated using fluorescence microscopy and the number of phosphorylation sites per kinase was estimated using QCM. Finally, the phosphorylation of the extracellular membrane was determined using electrochemistry. Our results clearly demonstrate the extracellular phosphorylation of neuronal cells and the strength of surface electrochemical techniques in the investigation of cellular phosphorylation.

Characterization of Inherently Chiral Electrosynthesized Oligomeric Films by Voltammetry and Scanning Electrochemical Microscopy (SECM).

A voltammetric and scanning electrochemical microscopy (SECM) investigation was performed on an inherently chiral oligomer-coated gold electrode to establish its general properties (i.e., conductivity and topography), as well as its ability to discriminate chiral electroactive probe molecules. The electroactive monomer (S)-2,2'-bis(2,2'-bithiophene-5-yl)-3,3'-bibenzothiophene ((S)-BT2T4) was employed as reagent to electrodeposit, by cyclic voltammetry, the inherently chiral oligomer film of (S)-BT2T4 (oligo-(S)-BT2T4) onto the Au electrode surface (resulting in oligo-(S)-BT2T4-Au). SECM measurements, performed in either feedback or competition mode, using the redox mediators [Fe(CN)6]4- and [Fe(CN)6]3- in aqueous solutions, and ferrocene (Fc), (S)-FcEA, (R)-FcEA and rac-FcEA (FcEA is N,N-dimethyl-1-ferrocenylethylamine) in CH3CN solutions, indicated that the oligomer film, as produced, was uncharged. The use of [Fe(CN)6]3- allowed establishing that the oligomer film behaved as a porous insulating membrane, presenting a rather rough surface. This was inferred from both the approach curves and linear and bidimensional SECM scans, which displayed negative feedback effects. The oligomer film acquired semiconducting or fully conducting properties when the Au electrode was biased at potential more positive than 0.6 V vs. Ag|AgCl|KCl. Under the latter conditions, the approach curves displayed positive feedback effects. SECM measurements, performed in competition mode, allowed verifying the discriminating ability of the oligo-(S)-BT2T4 film towards the (S)-FcEA and (R)-FcEA redox mediators, which confirmed the results obtained by cyclic voltammetry. SECM linear scans indicated that the enantiomeric discriminating ability of the oligo-(S)-BT2T4 was even across its entire surface.

Nanoscale Intelligent Imaging Based on Real-Time Analysis of Approach Curve by Scanning Electrochemical Microscopy.

Scanning electrochemical microscopy (SECM) enables high-resolution imaging by examining the amperometric response of an ultramicroelectrode tip near a substrate. Spatial resolution, however, is compromised for nonflat substrates, where distances from a tip far exceed the tip size to avoid artifacts caused by the tip-substrate contact. Herein, we propose a new imaging mode of SECM based on real-time analysis of the approach curve to actively control nanoscale tip-substrate distances without contact. The power of this software-based method is demonstrated by imaging an insulating substrate with step edges using standard instrumentation without combination of another method for distance measurement, e.g., atomic force microscopy. An ∼500 nm diameter Pt tip approaches down to ∼50 nm from upper and lower terraces of a 500 nm height step edge, which are located by real-time theoretical fitting of an experimental approach curve to ensure the lack of electrochemical reactivity. The tip approach to the step edge can be terminated at <20 nm prior to the tip-substrate contact as soon as the theory deviates from the tip current, which is analyzed numerically afterward to locate the inert edge. The advantageous local adjustment of tip height and tip current at the final point of tip approach distinguishes the proposed imaging mode from other modes based on standard instrumentation. In addition, the glass sheath of the Pt tip is thinned to ∼150 nm to rarely contact the step edge, which is unavoidable and instantaneously detected as an abrupt change in the slope of approach curve to prevent damage of the fragile nanotip.

Tape-Stripping Electrochemical Detection of Melanoma.

A noninvasive electrochemical melanoma detection approach based on using adhesive tapes for collecting and fixing cells from a suspicious skin area and transferring the cells into a scanning electrochemical microscope (SECM) is presented. The adhesive layer collects the cells reproducibly and keeps them well adhered on the tape during experiments in an electrolyte solution. A melanoma biomarker, here the intracellular enzyme tyrosinase (TYR), was imaged on the tape-collected cells without further cell lysing using antibodies that were labeled with horseradish peroxidase (HRP). The HRP labels catalyzed the oxidation of a dissolved redox-active species, which was detected at a soft microelectrode, gently brushed in contact mode over the tape. The melanoma biomarker was first detected on tape-stripped samples with murine melanoma cells of different concentrations. Thereafter, increasing levels of TYR were recorded in cells that were collected from the skin of melanoma mouse models representing three different stages of tumor growth. Additionally, SECM results of tape-stripped different human melanoma cell lines were confirmed by previous studies based on traditionally fixed and permeabilized cells.

Systematic Analysis of Different Cell Spheroids with a Microfluidic Device Using Scanning Electrochemical Microscopy and Gene Expression Profiling.

The 3D cell spheroid is an emerging tool that allows better recapitulating of in vivo scenarios with multiple factors such as tissue-like morphology and membrane protein expression that intimately coordinates with enzyme activity, thus providing a psychological environment for tumorigenesis study. For analyzing different spheroids, conventional optical imaging may be hampered by the need for fluorescent labeling, which could cause toxicity side effects. As an alternative approach, scanning electrochemical microscopy (SECM) enables label-free imaging. However, SECM for cell spheroid imaging is currently suffering from incapability of systematically analyzing the cell aggregates from spheroid generation, electrochemical signal gaining, and the gene expression on different individual cell spheroids. Herein, we developed a top-removable microfluidic device for cell aggregate yielding and SECM imaging methodology to analyze heterotypic 3D cell spheroids on a single device. This technique allows not only on-chip culturing of cell aggregates but also SECM imaging of the spheroids after opening the chip and subsequent qPCR assay of corresponding clusters. Through employment of the micropit arrays (85 × 4) with a top withdrawable microfluidic layer, uniformly sized breast tumor cell and fibroblast spheroids can be simultaneously produced on a single device. By leveraging voltage-switching mode SECM at different potentials of dual mediators, we evaluated alkaline phosphatase without disturbance of substrate morphology for distinguishing the tumor aggregates from stroma. Moreover, this method also enables gene expression profiling on individual tumor or stromal spheroids. Therefore, this new strategy can seamlessly bridge SECM measurements and molecular biological analysis.

Analysing single live cells by scanning electrochemical microscopy.

Single live cell analysis methods provide information on the characteristics of individual cells, yielding not only bulk population averages but also their heterogeneity. Scanning electrochemical microscopy (SECM) offers single live cell activities along its topography with high accuracy probe tip positioning. Both intracellular and extracellular processes can be electrochemically examined through the use of SECM. This non-invasive technique allows for high resolution mapping of electrochemical measurements in or around the cell sample of interest. Reactive oxygen species and reactive nitrogen species can be determined in a non-invasive label-free method and utilized as a probe for cellular pathology and physiology. Membrane permeability and rate of membrane species transport can be quantified in SECM. The cell response to external stressors can be monitored and modelled. SECM is able to offer nanoscale mapping and low concentration detection, providing a powerful bioanalytical tool for live cell studies. Herein we present an overview of recent progress in the imaging and characterization of single live cells using SECM.

Real-Time Metabolic Interactions between Two Bacterial Species Using a Carbon-Based pH Microsensor as a Scanning Electrochemical Microscopy Probe.

We have developed a carbon-based, fast-response potentiometric pH microsensor for use as a scanning electrochemical microscopy (SECM) chemical probe to quantitatively map the microbial metabolic exchange between two bacterial species, commensal Streptococcus gordonii and pathogenic Streptococcus mutans. The 25 µm diameter H+ ion-selective microelectrode or pH microprobe showed a Nernstian slope of 59 mV/pH and high selectivity against major ions such Na+, K+, Ca2+, and Mg2+. In addition, the unique conductive membrane composition aided us in performing an amperometric approach curve to position the probe and obtain a high-resolution pH map of the microenvironment produced by the lactate-producing S. mutans biofilm. The x-directional pH scan over S. mutans also showed the influence of the pH profile on the metabolic activity of another species, H2O2-producing S. gordonii. When these bacterial species were placed in close spatial proximity, we observed an initial increase in the local H2O2 concentration of approximately 12 ± 5 µM above S. gordonii, followed by a gradual decrease in H2O2 concentration (>30 min) to almost zero as lactate was produced, and a subsequent decrease in pH with a more pronounced metabolic output of S. mutans. These results were supported by gene expression and confocal fluorescence microscopic studies. Our findings illustrate that H2O2-producing S. gordonii is dominant while the buffering capacity of saliva is valid (∼pH 6.0) but is gradually taken over by S. mutans as the latter species slowly starts decreasing the local pH to 5.0 or less by producing lactic acid. Our observations demonstrate the unique capability of our SECM chemical probes for studying real-time metabolic interactions between two bacterial species, which would not otherwise be achievable in traditional assays.

Determination of the Relationship between Expression and Functional Activity of Multidrug Resistance-Associated Protein 1 using Scanning Electrochemical Microscopy.

Cancer cells can develop multidrug resistance (MDR) after prolonged exposure to chemotherapeutic drugs, which is a severe impediment to successful treatment. MDR is typically associated with transmembrane proteins mediating efflux of administered drugs, thereby keeping their intracellular concentration below the threshold required to kill cells. Although expression assays based on flow cytometry and immunostaining have shown that multidrug resistance-associated protein 1 (MRP1) is prevalent in many cancer types, the functional activity of this efflux pump is more difficult to elucidate, especially at the single-cell level. Herein, we report the measurement of MRP1 functional activity in individual cancer cells using scanning electrochemical microscopy (SECM). Cells were cultured onto plastic substrates containing selective adhesion sites. Optical microscopy and SECM revealed that cells adapt to the underlying surface, while MRP1 functional activity increases once the dimensions of the adhesive islands become smaller than those of the cell itself. Time-lapse SECM imaging revealed a suitable window of 30 min to complete each measurement before the cell undergoes blebbing, which is associated with a considerable increase in functional activity. Distinct cell populations were produced by performing a doxorubicin drug challenge on two parental cell lines (e.g., wild-type HeLa cells and MRP1-overexpressing HeLa-R cells). Expression and functional activity of MRP1 were determined using flow cytometry and SECM, and our findings show that these parameters do not directly correlate. This suggests that functional activity may represent a powerful indicator of a cancer cell's response to chemotherapeutic treatment and should improve our understanding of efflux mechanisms based on MRP1.

Quantitative Visualization of Molecular Delivery and Uptake at Living Cells with Self-Referencing Scanning Ion Conductance Microscopy-Scanning Electrochemical Microscopy.

A multifunctional dual-channel scanning probe nanopipet that enables simultaneous scanning ion conductance microscopy (SICM) and scanning electrochemical microscopy (SECM) measurements is demonstrated to have powerful new capabilities for spatially mapping the uptake of molecules of interest at living cells. One barrel of the probe is filled with electrolyte and the molecules of interest and is open to the bulk solution for both topographical feedback and local delivery to a target interface, while a solid carbon electrode in the other barrel measures the local concentration and flux of the delivered molecules. This setup allows differentiation in molecular uptake rate across several regions of single cells with individual measurements at nanoscale resolution. Further, operating in a "hopping mode", where the probe is translated toward the interface (cell) at each point allows self-referencing to be employed, in which the carbon electrode response is calibrated at each and every pixel in bulk for comparison to the measurement near the surface. This is particularly important for measurements in living systems where an electrode response may change over time. Finite element method (FEM) modeling places the technique on a quantitative footing to allow the response of the carbon electrode and local delivery rates to be quantified. The technique is extremely versatile, with the local delivery of molecules highly tunable via control of the SICM bias to promote or restrict migration from the pipet orifice. It is expected to have a myriad of applications from drug delivery to screening catalysts.

Methods to Measure Water Permeability.

Water permeability is a key feature of the cell plasma membranes and it has seminal importance for a number of cell functions such as cell volume regulation, cell proliferation, cell migration, and angiogenesis to name a few. The transport of water occurs mainly through plasma membrane water channels , the aquaporins, who have very important function in physiological and pathophysiological states. Due to the above the experimental assessment of the water permeability of cells and tissues is necessary. The development of new methodologies of measuring water permeability is a vibrant scientific field that constantly develops during the past three decades along with the advances in imaging mainly. In this chapter we describe and critically assess several methods that have been developed for the measurement of water permeability both in living cells as well as in tissues with a focus in the first category.

Real-time monitoring of quorum sensing in 3D-printed bacterial aggregates using scanning electrochemical microscopy.

Microbes frequently live in nature as small, densely packed aggregates containing ∼10(1)-10(5) cells. These aggregates not only display distinct phenotypes, including resistance to antibiotics, but also, serve as building blocks for larger biofilm communities. Aggregates within these larger communities display nonrandom spatial organization, and recent evidence indicates that this spatial organization is critical for fitness. Studying single aggregates as well as spatially organized aggregates remains challenging because of the technical difficulties associated with manipulating small populations. Micro-3D printing is a lithographic technique capable of creating aggregates in situ by printing protein-based walls around individual cells or small populations. This 3D-printing strategy can organize bacteria in complex arrangements to investigate how spatial and environmental parameters influence social behaviors. Here, we combined micro-3D printing and scanning electrochemical microscopy (SECM) to probe quorum sensing (QS)-mediated communication in the bacterium Pseudomonas aeruginosa. Our results reveal that QS-dependent behaviors are observed within aggregates as small as 500 cells; however, aggregates larger than 2,000 bacteria are required to stimulate QS in neighboring aggregates positioned 8 µm away. These studies provide a powerful system to analyze the impact of spatial organization and aggregate size on microbial behaviors.

Anteriorly located zonular fibres as a tool for fine regulation in accommodation.

PURPOSE: To describe an anteriorly located system of zonular fibres that could be involved in fine-tuning of accommodation. METHODS: Forty-six human and 28 rhesus monkey eyes were dissected and special preparations were processed for scanning electron microscopy and reflected-light microscopy. Additional series of frontal and sagittal histological and ultrathin sections were analysed in respect to the origin and insertion of anteriorly located zonules. The presence of sensory terminals at the site of the originating zonules within the connective tissue of the ciliary body was studied by immunohistochemistry. For in-vivo visualization ultrasound biomicroscopy (UBM) was performed on 12 human subjects. RESULTS: Fine zonular fibres originated from the valleys and lateral walls of the most anterior pars plicata that covers the anterior and inner circular ciliary muscle portion. These most anterior zonules (MAZ) showed attachments either to the anterior or posterior tines or they inserted directly onto the surface of the lens. At the site of origin, the course of the MAZ merged into the connective tissue fibres connecting the adjacent pigmented epithelium to the ciliary muscle. Numerous afferent terminals directly at the site of this MAZ-origin were connected to the intrinsic nervous network of the ciliary muscle. CONCLUSIONS: A newly described set of zonular fibres features the capabilities to register the tensions of the zonular fork and lens capsule. The close location and neural connection towards the circular ciliary muscle portion could provide the basis for stabilization and readjustment of focusing that serves fast and fine-tuned accommodation and disaccommodation.

Novel method of simultaneous multiple immunogold localization on resin sections in high resolution scanning electron microscopy.

We present a new method of multiple immunolabeling that is suitable for a broad spectrum of biomedical applications. The general concept is to label both sides of the ultrathin section with the thickness of 70-80 nm with different antibodies conjugated to gold nanoparticles and to distinguish the labeled side by advanced imaging methods with high resolution scanning electron microscopy, such as by correlating images acquired at different energies of primary electrons using different signals. From the Clinical Editor: The use of transmission electron microscopy has become an indispensible tool in the detection of cellular proteins. In this short but interesting article, the authors described their new method of labeling and the identification of four different proteins simultaneously, which represents another advance in imaging technique.

Finger probe array for topography-tolerant scanning electrochemical microscopy of extended samples.

Scanning electrochemical microscopy with soft microelectrode array probes has recently been used to enable reactivity imaging of extended areas and to compensate sample corrugation perpendicular to the scanning direction. Here, the use of a new type of microelectrode arrays is described in which each individual microelectrode can independently compensate corrugations of the sample surface. It consists of conventional Pt microelectrodes enclosed in an insulating glass sheath. The microelectrodes are individually fixed to a new holder system by magnetic forces. The concept was tested using a large 3D sample with heights up to 12 µm specially prepared by inkjet printing. The microelectrodes follow the topography in a constant working distance independently from each other while exerting low pressure on the surface.

Highly selective enrichment of N-linked glycan by carbon-functionalized ordered graphene/mesoporous silica composites.

Abnormal protein glycosylation has been demonstrated to be associated with many diseases; therefore, it is very important to conduct a comprehensive structure analysis of glycan for prognosis and diagnosis of diseases, such as cancer. In this work, for the first time, carbon-functionalized ordered graphene/mesoporous silica composites (denoted as C-graphene@mSiO2) with large surface area and uniform pore size were designed and synthesized. By taking advantage of the special interaction between the carbon and glycans as well as size-exclusion ability, 25 N-linked glycans released from ovalbumin were observed clearly with strong MS signals and increased signal-to-noise (S/N) ratio. In addition, after enrichment with the C-graphene@mSiO2 composites, 48 N-linked glycans (S/N > 10) with sufficient peak intensities were obtained from only 400 nL of healthy pristine human serum. The facile and low-cost synthesis method as well as high selective enrichment ability of the novel C-graphene@mSiO2 composite makes it a promising tool for glycosylation research.