A novel ternary heterogeneous TiO2/BiVO4/NaY-Zeolite nanocomposite for photocatalytic degradation of microcystin-leucine arginine (MC-LR) under visible light.

Microcystin-leucine arginine (MC-LR) is a carcinogenic toxin, produced by cyanobacteria. The release of this toxin into drinking water sources can threaten public health and environmental safety. Therefore, effective MC-LR removal from water resources is necessary. In the present study, the hydrothermal method was used to synthesize a novel ternary BiVO4/TiO2/NaY-Zeolite (B/T/N-Z) nanocomposite for MC-LR degradation under visible light. FESEM, FTIR, XRD, and DRS were performed for characterizing the nanocomposite structure. Also, the Response Surface Methodology (RSM) was applied to determine the impact of catalyst dosage, pH, and contact time on the MC-LR removal. High-performance liquid chromatography was performed to measure the MC-LR concentration. Based on the results, independent parameters, including contact time, catalyst dosage, and pH, significantly affected the MC-LR removal (P < 0.05). In other words, increasing the contact time, catalyst dosage, and acidic pH had positive effects on MC-LR removal. Among these variables, the catalyst dosage, with the mean square and F-value of 1041.37 and 162.84, respectively, had the greatest effect on the MC-LR removal efficiency. Apart from the interaction between the catalyst dosage and contact time, the interaction effects of other parameters were not significant. Also, the maximum MC-LR removal efficiency was 99.88% under optimal conditions (contact time = 120 min, catalyst dosage = 1 g/L, and pH = 5). According to the results, the B/T/N-Z nanocomposite, as a novel and effective photocatalyst could be used to degrade MC-LR from polluted water.

Polyaniline@Au organic-inorganic nanohybrids with thermometer readout for photothermal immunoassay of tumor marker.

A photothermal immunoassay using a thermometer as readout based on polyaniline@Au organic-inorganic nanohybrids was built. Temperature output is acquired due to the photothermal effect of the photothermal nanomaterial. Polyaniline@Au organic-inorganic nanohybrids were synthesized by interfacial reactions with high photothermal conversion efficiency. A sandwich structure of the immunocomplex was prepared on a microplate for determination of carcinoembryonic antigen (CEA) by polyaniline@Au organic-inorganic nanohybrids as nanolabel. The released heat based on light-to-heat conversion from the photothermal nanolabel under NIR irradiation is detectable using the thermometer. The increased temperature is directly proportional to CEA concentration. The linear range of the photothermal immunoassay is 0.20 to 25 ng mL-1 with determination limit of 0.17 ng mL-1. Polyaniline@Au organic-inorganic nanohybrids with high photothermal conversion efficiency was synthesized as labels to construct photothermal immunosensor. The sandwich-type immunoassay was built on 96 hole plate based on specific binding of antigen and antibody. Carcinoembryonic antigen in sample was detected quantitatively by thermometer readout.

Fluorescent detection of microRNA-21 in MCF-7 cells based on multifunctional gold nanorods and the integration of chemotherapy and phototherapy.

MicroRNA-21 is an important biomarker of tumor early prediction and metastasis, and its accurate detection is of great significance for tumor diagnosis and treatment. It will be a meaningful work to combine the detection of RNA with chemotherapy and photothermal therapy on the same composite material. Herein, we designed a multifunctional nanocomposite based on gold nanorods (AuNRs), making use of microRNA-triggered drug release and near-infrared photothermal effect, which has been developed for cancer therapy and microRNA-21detection. Firstly, the AuNRs with photothermal effect were synthesized as carriers for drug delivery. Then the surface of gold nanorods was modified by functional DNA chains to provide an efficient site for doxorubicin (DOX) loading. Finally, folic acid was introduced to achieve the targeted treatment of MCF-7 cells. The microRNA competed with the double-stranded DNA, resulting in the release of DOX and the recovery of fluorescence signal located at 595 nm with an excitation of 488 nm effectively. The nano-biosensor could not only achieve dual-function of diagnosis and treatment of cancer cells, but also accomplish the detection of microRNA in tumor cells. It showed a high selectivity for microRNA-21 determination with a limit of detection (LOD) of 2.1 nM from the linear relationship from 1.0 × 10-5 M to 5.0 × 10-7 M. This scheme provides an outstanding strategy for cell imaging, treatment, and detection, which serves as a promising candidate in the field of biomedical research.

Photomechanical Polymer Nanocomposites for Drug Delivery Devices.

We demonstrate a novel structure based on smart carbon nanocomposites intended for fabricating laser-triggered drug delivery devices (DDDs). The performance of the devices relies on nanocomposites' photothermal effects that are based on polydimethylsiloxane (PDMS) with carbon nanoparticles (CNPs). Upon evaluating the main features of the nanocomposites through physicochemical and photomechanical characterizations, we identified the main photomechanical features to be considered for selecting a nanocomposite for the DDDs. The capabilities of the PDMS/CNPs prototypes for drug delivery were tested using rhodamine-B (Rh-B) as a marker solution, allowing for visualizing and quantifying the release of the marker contained within the device. Our results showed that the DDDs readily expel the Rh-B from the reservoir upon laser irradiation and the amount of released Rh-B depends on the exposure time. Additionally, we identified two main Rh-B release mechanisms, the first one is based on the device elastic deformation and the second one is based on bubble generation and its expansion into the device. Both mechanisms were further elucidated through numerical simulations and compared with the experimental results. These promising results demonstrate that an inexpensive nanocomposite such as PDMS/CNPs can serve as a foundation for novel DDDs with spatial and temporal release control through laser irradiation.

FRET Modulated Signaling: A Versatile Strategy to Construct Photoelectrochemical Microsensors for In Vivo Analysis.

Microelectrode-based electrochemical (EC) and photoelectrochemical (PEC) sensors are promising candidates for in vivo analysis of biologically important chemicals. However, limited selectivity in complicated biological systems and poor adaptability to electrochemically non-active species restrained their applications. Herein, we propose the concept of modulating the PEC output by a fluorescence resonance energy transfer (FRET) process. The emission of energy donor was dependent on the concentration of target SO2 , which in turn served as the modulator of the photocurrent signal of the photoactive material. The employment of optical modulation circumvented the problem of selectivity, and the as-fabricated PEC microelectrode showed good stability and reproducibility in vivo. It can monitor fluctuations of SO2 levels in brains of rat models of cerebral ischemia-reperfusion and febrile seizure. More significantly, such a FRET modulated signaling strategy can be extended to diverse analytes.

Polypyrrole and polyaniline nanocomposites with high photothermal conversion efficiency.

The simple and scalable synthesis of poly[2-(methacryloyloxy)ethyl phosphorylcholine] (PMPC)-coated conducting polymer (CP) nanocomposites is described. These functional nanocomposites exhibit tunable absorption in the near-infrared region with relatively high photothermal efficiencies. More importantly, their potential for bio-imaging and therapeutic treatment is proven by cellular uptake and cytotoxicity studies.

Novel CoFe2O4@ZnO-CeO2 ternary nanocomposite: Sonochemical green synthesis using Crataegus microphylla extract, characterization and their application in catalytic and antibacterial activities.

In this study, CoFe2O4@ZnO-CeO2 magnetic nanocomposite (CoFe@Zn-Ce MNC) was successfully prepared by facile sonochemical method for the first time. CoFe@Zn-Ce MNC was obtained by green and cost-effective process in the presence of Crataegus microphylla (C. microphylla) fruit extract. Influence of some parameters like capping agents (C. microphylla, SDS and CTAB), sonication time (10, 30 and 60 min) and sonication power (40, 60 and 80 W) were studied to achieve optimum condition. The as-obtained products were characterized by FT-IR, FESEM, TEM, DRS, VSM, EDS, TGA and XRD analysis. Results showed that high magnetic properties (20.38 emug-1), 70-80 nm size and spherical morphology were unique characteristics of synthesized nanocomposite. Antibacterial activity of CoFe@Zn-Ce MNC was examined against E. coli, P. aeruginoss and S. aureus bacteria. Among theme, S. aureus as gram-positive bacteria showed excellent antibacterial activity. Furthermore, photocatalytic performance of the CoFe@Zn-Ce MNC was investigated by degradation of humic acid (HA) molecules under visible and UV light irradiations. The influence of morphology of products and incorporation of cerium oxide with CoFe2O4@ZnO on photocatalytic activity of CoFe2O4@ZnO was performed. After 100 min illumination, the decomposition of HA pollutant by magnetic nanocomposite were 97.2% and 72.4% under exposure of UV and visible light irradiations, respectively. Also, CoFe@Zn-Ce MNC demonstrated high stability in the cycling decomposition experiment after six times cycling runs.

In situ photocrosslinkable formulation of nanocomposites based on multi-walled carbon nanotubes and formononetin for potential application in spinal cord injury treatment.

Carbon nanotubes (CN) have been studied to treat spinal cord injuries because of its electrical properties and nanometric dimensions. This work aims to develop a photopolymerizable hydrogel containing CN functionalized with an anti-inflammatory molecule to be used in situ on spinal cord injuries. The CN functionalization step was done using the drug (formononetin). The nanocomposites were characterized by morphological analysis, FTIR, Raman Spectroscopy, thermal analysis and cytotoxicity assays (MTT and HET-CAM). The nanocomposites were incorporated into gelatin methacryloyl hydrogel and exposed to UV light for photopolymerization. The volume of the formulation and the UV exposition time were also analyzed. The CN characterization showed that formononetin acted as a functionalization agent. The functionalized CN showed safe characteristics and can be incorporated in photocrosslinkable formulation. The UV exposition time for the formulation photopolymerization was compatible with the cell viability and also occurred in the injury site.

Evaluation of degree of conversion, rate of cure, microhardness, depth of cure, and contraction stress of new nanohybrid composites containing pre-polymerized spherical filler.

The aim of the present study was to characterize nanohybrid and nanofilled composites in terms of degree of conversion (DC), rate of cure (RC), microhardness (Vickers hardness number; VHN), depth of cure, and contraction stress (CS). Ceram.X® universal- A3, duo enamel E2, and duo dentin D3 composites were compared to Tetric EvoCeram® and FiltekTMSupreme XTE composites of equivalent dentin and enamel shades under a 40 s photopolymerization protocol. DC was measured by infrared spectroscopy, calculating RC from the kinetic curve. Top and bottom VHN were determined using a Vickers indenter, and bottom/top surface ratio (Vickers hardness ratio; VHR) calculated. CS vs. time was assessed by a universal testing machine and normalized for the specimen bonding area. All materials showed DC < 60%, Ceram.X® composites reaching higher values than the other composites of corresponding shades. RC at 5 s of photopolymerization was always higher than that at 10 s. All the Ceram.X® composites and the lighter-shaded Tetric EvoCeram® and FiltekTMSupreme XTE composites reached the RC plateau after 25 s, the remaining materials showed a slower kinetic trend. Tetric EvoCeram® and FiltekTMSupreme XTE composites displayed the softest and the hardest surfaces, respectively. Differently from darker-shaded materials, the universal and the three enamel-shaded composites resulted optimally cured (VHR > 80%). The tested composites differed in CS both during and after light cure, Tetric EvoCeram® and FiltekTMSupreme XTE composites displaying the highest and the lowest CS, respectively. Only the Ceram.X® universal-A3 reached a CS plateau value. The tested composites exhibited material-dependent chemo-mechanical properties. Increasing the curing time and/or reducing the composite layer thickness for dentin-shaded composites appears advisable.

Carbon quantum Dot@Silver nanocomposite-based fluorescent imaging of intracellular superoxide anion.

Silver nanoparticle (Ag NP)-coated carbon quantum dot (CQD) core-shell-structured nanocomposites (CQD@Ag NCs) were developed for fluorescent imaging of intracellular superoxide anion (O2•-). The morphology of CQD@Ag NCs was investigated by transmission electron microscopy, and the composition was characterized by X-ray diffraction and X-ray photoelectron spectroscopy. CQDs display blue fluorescence with excitation/emission maxima at 360/440 nm, and the fluorescence was quenched by Ag NPs in CQD@Ag NCs. In the presence of O2•-, Ag NPs were oxide-etched and the fluorescence of CQDs was recovered. A linearity between the relative fluorescence intensity and O2•- solution concentration within the range 0.6 to 1.6 µM was found, with a detection limit of 0.3 µM. Due to their high sensitivity, selectivity, and low cytotoxicity, the as-synthesized CQD@Ag NCs have been successfully applied for imaging of O2•- in MCF-7 cells during the whole process of autophagy induced by serum starvation. In our perception, the developed method provides a cost-effective, sensitive, and selective tool in bioimaging and monitoring of intracellular O2•- changes, and is promising for potential biological applications. Graphical abstract Illustration of the synthesis of carbon quantum Dot@Silver nanocomposites (CQD@Ag NCs), and CQD@Ag NCs as a "turn-on" nanoprobe for fluorescent imaging of intracellular superoxide anion.

NaGdF4:Yb,Er-Ag nanowire hybrid nanocomposite for multifunctional upconversion emission, optical imaging, MRI and CT imaging applications.

The effect of novel silver nanowire encapsulated NaGdF4:Yb,Er hybrid nanocomposite on the upconversion emission and bioimaging properties has been investigated. The upconvension nanomaterials were synthesised by polyol method in the presence of ethylene glycol, PVP and ethylenediamine. The NaGdF4:Yb,Er-Ag hybrid was formed with upconverting NaGdF4:Yb,Er nanoparticles of size ~ 80 nm and silver nanowires of thickness ~ 30 nm. The surface plasmon induced by the silver ion in the NaGdF4:Yb,Er-Ag nanocomposite resulted an intense upconversion green emission at 520 nm and red emission at 660 nm by NIR diode laser excitation at 980 nm wavelength. The UV-Vis-NIR spectral absorption at 440 nm and 980 nm, the intense Raman vibrational modes and the strong upconversion emission results altogether confirm the localised surface plasmon resonance effect of silver ion in the hybrid nanocomposite. MRI study of both NaGdF4:Yb,Er nanoparticle and NaGdF4:Yb,Er-Ag nanocomposite revealed the T1 relaxivities of 22.13 and 10.39 mM-1 s-1, which are larger than the commercial Gd-DOTA contrast agent of 3.08 mM-1 s-1. CT imaging NaGdF4:Yb,Er-Ag and NaGdF4:Yb,Er respectively showed the values of 53.29 HU L/g and 39.51 HU L/g, which are higher than 25.78 HU L/g of the CT contrast agent Iobitridol. The NaGdF4:Yb,Er and NaGdF4:Yb,Er-Ag respectively demonstrated a negative zeta potential of 54 mV and 55 mV, that could be useful for biological application. The in vitro cytotoxicity of the NaGdF4:Yb,Er tested in HeLa and MCF-7 cancer cell line by MTT assay demonstrated a cell viability of 90 and 80 %, respectively. But, the cell viability of NaGdF4:Yb,Er-Ag slightly decreased to 80 and 78%. The confocal microscopy imaging showed that the UCNPs are effectively up-taken inside the nucleolus of the cancer cells, and it might be useful for NIR laser-assisted phototherapy for cancer treatment. Graphical abstract.

Optimization of the Preparation of Magnetic Liposomes for the Combined Use of Magnetic Hyperthermia and Photothermia in Dual Magneto-Photothermal Cancer Therapy.

In this work, we aimed to develop liposomal nanocomposites containing citric-acid-coated iron oxide magnetic nanoparticles (CMNPs) for dual magneto-photothermal cancer therapy induced by alternating magnetic field (AMF) and near-infrared (NIR) lasers. Toward this end, CMNPs were encapsulated in cationic liposomes to form nano-sized magnetic liposomes (MLs) for simultaneous magnetic hyperthermia (MH) in the presence of AMF and photothermia (PT) induced by NIR laser exposure, which amplified the heating efficiency for dual-mode cancer cell killing and tumor therapy. Since the heating capability is directly related to the amount of entrapped CMNPs in MLs, while the liposome size is important to allow internalization by cancer cells, response surface methodology was utilized to optimize the preparation of MLs by simultaneously maximizing the encapsulation efficiency (EE) of CMNPs in MLs and minimizing the size of MLs. The experimental design was performed based on the central composite rotatable design. The accuracy of the model was verified from the validation experiments, providing a simple and effective method for fabricating the best MLs, with an EE of 87% and liposome size of 121 nm. The CMNPs and the optimized MLs were fully characterized from chemical and physical perspectives. In the presence of dual AMF and NIR laser treatment, a suspension of MLs demonstrated amplified heat generation from dual hyperthermia (MH)-photothermia (PT) in comparison with single MH or PT. In vitro cell culture experiments confirmed the efficient cellular uptake of the MLs from confocal laser scanning microscopy due to passive accumulation in human glioblastoma U87 cells originated from the cationic nature of MLs. The inducible thermal effects mediated by MLs after endocytosis also led to enhanced cytotoxicity and cumulative cell death of cancer cells in the presence of AMF-NIR lasers. This functional nanocomposite will be a potential candidate for bimodal MH-PT dual magneto-photothermal cancer therapy.

The Response of Pseudomonas aeruginosa PAO1 to UV-activated Titanium Dioxide/Silica Nanotubes.

Pseudomonas aeruginosa is a bacterium of high clinical and biotechnological importance thanks to its high adaptability to environmental conditions. The increasing incidence of antibiotic-resistant strains has created a need for alternative methods to increase the chance of recovery in infected patients. Various nanomaterials have the potential to be used for this purpose. Therefore, we aimed to study the physiological response of P. aeruginosa PAO1 to titanium dioxide/silica nanotubes. The results suggest that UV light-irradiated nanomaterial triggers strong agglomeration in the studied bacteria that was confirmed by microscopy, spectrophotometry, and flow cytometry. The effect was diminished when the nanomaterial was applied without initial irradiation, with UV light indicating that the creation of reactive oxygen species could play a role in this phenomenon. The nanocomposite also affected biofilm formation ability. Even though the biomass of biofilms was comparable, the viability of cells in biofilms was upregulated in 48-hour biofilms. Furthermore, from six selected genes, the mexA coding efflux pump was upregulated, which could be associated with an interaction with TiO2. The results show that titanium dioxide/silica nanotubes may alter the physiological and metabolic functions of P. aeruginosa PAO1.

Carbon Nanotube Reinforced High Density Polyethylene Materials for Offshore Sheathing Applications.

Multiwall carbon nanotube (CNT)-filled high density polyethylene (HDPE) nanocomposites were prepared by extrusion and considered for their suitability in the offshore sheathing applications. Transmission electron microscopy was conducted to analyse dispersion after bulk extrusion. Monolithic and nanocomposite samples were subjected to accelerated weathering and photodegradation (carbonyl and vinyl indices) characterisations, which consisted of heat, moisture (seawater) and UV light, intended to imitate the offshore conditions. The effects of accelerated weathering on mechanical properties (tensile strength and elastic modulus) of the nanocomposites were analysed. CNT addition in HDPE produced environmentally resilient nanocomposites with improved mechanical properties. The energy utilised to extrude nanocomposites was also less than the energy used to extrude monolithic HDPE samples. The results support the mass substitution of CNT-filled HDPE nanocomposites in high-end offshore applications.

Ingenious Dual-Photoelectrode Internal-Driven Self-Powered Sensing Platform for the Power Generation and Simultaneous Microcystin Monitoring Based on the Membrane/Mediator-Free Photofuel Cell.

To further heighten solar-energy utilization efficiency could be significantly meaningful for developing useful photoelectric devices. Here, by integrating the nitrogen-doped graphene-BiOBr (NG-BiOBr) nanocomposites as a photocathode with titanium dioxide (TiO2) nanoparticles as a photoanode synchronously, a dual-photoelectrode internally driven self-powered sensing platform was fabricated, which can work without an external energy input except for light illumination. In this design, the microcystin-LR (MC-LR) molecules function as the fuel and model analyte as well. Avoiding the use of the costly cathode, this is the first example of the integration of a dual photoresponsive electrode into a photofuel cell for self-powered sensing and paves a luciferous way for efficient multidimension energy conversion. Besides, in order to investigate the detailed sensing process of the self-powered system, the Nyquist curves of the interface are studied between the dual-photoelectrode before and after adding the target MC-LR. The results demonstrated that the photoanode TiO2 contributed to the oxidation of MC-LR under photoirradiation rather than the photocathode. This work not only provides an appealing idea to construct the sensitive and easy-to-use assays of microcystins but also exhibits a successful prototype of a portable and on-site sensor.

In-Situ Oxygen-Evolving Photoactive Nanococktail: The Future of Hypoxic Tumour Photodynamic Therapy.

Hypoxia-related resistance is one of the main challenges for photodynamic therapy to overcome. This highlight discusses a few current works on possible ways to overcome this problem by in situ oxygen generation in the hypoxic core of tumours.

Strong, Ductile, and Waterproof Cellulose Nanofibril Composite Films with Colloidal Lignin Particles.

Brittleness has hindered commercialization of cellulose nanofibril (CNF) films. The use of synthetic polymers and plasticizers is a known detour that impairs biodegradability and carbon footprint of the product. Herein, we utilize a variety of softwood Kraft lignin morphologies to obtain strong and ductile CNF nanocomposite films. An optimum 10 wt % content of colloidal lignin particles (CLPs) produced films with nearly double the toughness compared to a CNF film without lignin. CLPs rendered the films waterproof, provided antioxidant activity and UV-shielding with better visible light transmittance than obtained with irregular lignin aggregates. We conclude based on electron microscopy, dynamic water sorption analysis, and tp-DSC that homogeneously distributed CLPs act as ball bearing lubricating and stress transferring agents in the CNF matrix. Overall, our results open new avenues for the utilization of lignin nanoparticles in biopolymer composites equipped with versatile functionalities for applications in food packaging, water purification, and biomedicine.

A new visual immunoassay for prostate-specific antigen using near-infrared excited CuxS nanocrystals and imaging on a smartphone.

A photothermal immune-imaging assay was innovatively designed for the visual quantitative detection of cancer biomarkers by coupling CuxS nanocrystals with a portable infrared thermal imager on a smartphone. The rolling circle amplification (RCA) technique was used for the formation of a CuxS nanocrystal concatemer, thus opening up new territories in immunoassay development.

A surface plasmon resonance enhanced photoelectrochemical immunoassay based on perovskite metal oxide@gold nanoparticle heterostructures.

An innovative visible light-driven photoelectrochemical (PEC) immunosensing system was reasonably established for the sensitive detection of prostate-specific antigen (PSA) by using perovskite metal oxide@gold nanoparticle heterostructures (BaTiO3/Au) as the photoactive materials. When plasmonic Au nanoparticles were directly decorated on BaTiO3, a several times surface plasmon resonance (SPR) enhancement of photocurrent density was induced via the injection of hot electrons from visible light-excited Au nanoparticles into the conduction band of BaTiO3, and the combination of BaTiO3 and Au nanoparticles was employed as a promising platform for developing a photoelectrochemical bioanalysis. As a proof of concept, PSA had been detected by the BaTiO3/Au nanocomposite-based PEC sensor. To design such an immunoassay protocol, a monoclonal anti-PSA capture antibody (cAb)-coated microplate and glucose oxidase/polyclonal anti-PSA detection antibody-modified gold nanoparticles (GOx-Au NP-dAb) were used as the immunoreaction platform and signal probe, respectively. Upon the addition of target PSA, a sandwiched immunocomplex was formed accompanying the immuno-recognition between the antigen and antibody, and then the carried GOx could oxidize glucose to produce H2O2. The photocurrent of the BaTiO3/Au nanocomposite-functionalized electrode amplified with increasing H2O2 concentration since H2O2 is considered as a good hole scavenger. On the basis of the above-mentioned mechanisms and the optimized conditions, the assembled PEC immunosensor was linear with the logarithm of the PSA concentration in the range of 0.01-40 ng mL-1 with a detection limit of 4.2 pg mL-1. It afforded rapid response, good precision, and high stability and specificity, implying its great promise in photoelectrochemical immunoassays. More generally, this system sets up an ideal PEC immunosensing system based on the BaTiO3/Au nanocomposites and represents an innovative and low-cost "signal-on" assay scheme for the practical quantitative screening of low-abundance proteins.

Microstructure evolution of sandwich graphite oxide/interlayer-embedded Au nanoparticles induced from γ-rays for carcinoembryonic antigen biosensor.

With the capability of inducing small particle sizes of supported metal in graphite oxide (GO), the γ-ray irradiation method applied for preparing graphite oxide-gold (GO-Au) nanocomposites as electrochemical immunosensors has attracted specific attention recently. To study the accurate factors influencing the precise morphology and final performance of the prepared composites in the γ-irradiation system, we proposed a facile method to investigate the evolution of the GO structure, size and dispersion of Au nanoparticles (AuNPs) produced with the addition of isopropyl alcohol to the system. The GO-Au nanocomposites were characterized by Fourier transform infrared spectroscopy, x-ray diffraction spectra, Raman spectra, x-ray photoelectron spectroscopy and high resolution transmission electron microscopy. These nanocomposites with sandwich morphology exhibited an excellent immunosensor performance with a low detection limit of 15.8 pg ml-1 (S/N = 3) and a wide linear range from 1 to 40 ng ml-1 for detecting carcinoembryonic antigens. The enhanced biosensing performance is attributed to the synergistic effect of γ-irradiation and the precise structure of GO, which endows the smaller size and more uniform distribution of AuNPs on the GO as well as the good signal amplification capability. Furthermore, adopting the γ-irradiation method and use of GO as a precursor is propitious for application in large-scale production because of its high-efficiency and high-yielding characteristics.