Effects of oxygen generating scaffolds on cell survival and functional recovery following acute spinal cord injury in rats.

Persistent local oxygen delivery is crucial to create a microenvironment for cell survival and nerve regeneration in acute spinal cord injury (SCI). This study aimed to fabricate calcium peroxide-based microspheres incorporated into a 3-D construct scaffold as a novel oxygen release therapy for SCI. The scaffolds were able to generate oxygen over the course of 21 days when incubated under hypoxic conditions. In vitro, GFP-labeled bone marrow-derived mesenchymal stem cells (MSCs) were planted into the scaffolds. We observed that scaffolds could enhance MSC survival under hypoxic conditions for more than 21 days. Oxygen generating scaffolds were transplanted into spinal cord injury sites of rats in vivo. Twelve weeks following transplantation, cavity areas in the injury/graft site were significantly reduced due to tissue regeneration. Additionally, the oxygen generating scaffolds improved revascularization as observed through vWF immunostaining. A striking feature was the occurrence of nerve fiber regeneration in the lesion sites, which eventually led to significant locomotion recovery. The present results indicate that the oxygen generating scaffolds have the property of sustained local oxygen release, thus facilitating regeneration in injured spinal cords.

The effect of macrophages on an atmospheric pressure plasma-treated titanium membrane with bone marrow stem cells in a model of guided bone regeneration.

Guided bone regeneration (GBR) is an established treatment. However, the mechanisms of GBR are not fully understood. Recently, a GBR membrane was identified that acts as a passive barrier to regenerate bone via activation and migration of macrophages (Mps) and bone marrow stem cells (BMSCs). Atmospheric pressure plasma treatment of the titanium membrane (APP-Ti) activated macrophages. The purpose of this study was to analyze whether macrophages attached to an APP-Ti membrane affected differentiation of BMSCs in a GBR model. Human THP-1 macrophages (hMps) were cultured on non-treated Ti (N-Ti) and APP-Ti membrane. Macrophage polarization was analyzed by RT-PCR and immunocytochemistry. Secreted proteins from hMps on N-Ti and APP-Ti were detected by LC/MS/MS. hBMSCs were co-cultured with hMps on N-Ti or APP-Ti and analyzed by osteogenic differentiation, Alizarin red S staining, and alkaline phosphatase (ALP) activity. N-Ti and APP-Ti membrane were also implanted into bone defects of rat calvaria. hMps on APP-Ti were polarized M2-like macrophages. hMps on N-Ti secreted plasminogen activator inhibitor-1 and syndecan-2, but hMps on APP-Ti did not. hBMSCs co-cultured with hMps on APP-Ti increased cell migration and gene expression of osteogenic markers, but suppressed mineralization, while ALP activity was similar to that of hMps on N-Ti in vitro. The volume of newly formed bone was not significantly different between N-Ti and APP-Ti membrane in vivo. M2 polarized hMps on APP-Ti suppressed osteogenic induction of hBMSCs in vitro. The indirect role of hMps on APP-Ti in newly formed bone was limited.

Rotary-jet spun polycaprolactone/nano-hydroxyapatite scaffolds modified by simulated body fluid influenced the flexural mode of the neoformed bone.

Polycaprolactone (PCL) is a biocompatible, biodegradable synthetic polymer which in combination with nanohydroxyapatite (nHAp) can give rise to a low cost, nontoxic bioactive product with excellent mechanical properties and slow degradation. Here we produced, characterized and evaluated in vivo the bone formation of PCL/nHAp scaffolds produced by the rotary jet spinning technique. The scaffolds produced were firstly soaked into simulated body fluid for 21 days to also obtain nHAp onto PCL/nHAp scaffolds. Afterwards, the scaffolds were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy and Raman spectroscopy. For in vivo experiments, 20 male Wistar rats were used and randomly divided in 4 experimental groups (n = 5). A critical defect of 3 mm in diameter was made in the tibia of the animals, which were filled with G1 control (clot); G2-PCL scaffold; G3-PCL/nHAp (5%) scaffold; G4-PCL/nHAp (20%) scaffold. All animals were euthanized 60 days after surgery, and the bone repair in the right tibiae were evaluated by radiographic analysis, histological analysis and histomorphometric analysis. While in the left tibias, the areas of bone repair were submitted to the flexural strength test. Radiographic and histomorphometric analyses no showed statistical difference in new bone formation between the groups, but in the three-point flexural tests, the PCL/nHAp (20%) scaffold positively influenced the flexural mode of the neoformed bone. These findings indicate that PCL/nHAp (20%) scaffold improve biomechanical properties of neoformed bone and could be used for bone medicine regenerative.

Bacterial cellulose tubes as a nerve conduit for repairing complete facial nerve transection in a rat model.

PURPOSE: Functionality of the facial nerve is cosmetically important. While many techniques have been investigated, early and effective treatment for traumatic facial nerve paralysis remains challenging. Here, we aim to examine bacterial cellulose (BC) as a new tubularization material for improving facial nerve regeneration. METHODS: Our study was performed on 40 female Sprague Dawley rats. Rats were randomly divided into four groups, with 10 rats per group. In all rats, the main trunk of the facial nerve was completely cut 8 mm before the branching point. For repairing the facial nerve, in group 1, the nerve was left to recover spontaneously (control group); in group 2, it was repaired by primary suturing (8.0 Ethilon sutures, Ethicon); in group 3, BC tubes alone were used to aid nerve repair; and in group 4, both BC tubes and primary sutures (8.0 Ethilon sutures) were used. After 10 weeks, the facial nerve regeneration was evaluated by the whisker movement test and electrophysiologically (nerve stimulation threshold and compound muscle action potential). Nerve regeneration was assessed by calculating the number of myelinated nerve fibers, and by microscopically evaluating the amount of regeneration and fibrosis. RESULTS: No significant difference was observed among the groups in terms of whisker movement and electrophysiological parameters (P > 0.05). We found that the numbers of regenerating myelinated fibers were significantly increased (P < 0.05) when BC tubes were used as a nerve conduit. CONCLUSIONS: BC can be easily shaped into a hollow tube that guides nerve axons, resulting in better nerve regeneration after transection.

Evaluation of dual release of stromal cell-derived factor-1 and basic fibroblast growth factor with nerve conduit for peripheral nerve regeneration: An experimental study in mice.

BACKGROUND: The development of drug delivery systems has enabled the release of multiple bioactive molecules. The efficacy of nerve conduits coated with dual controlled release of stromal cell-derived factor-1 (SDF-1) and basic fibroblast growth factor (bFGF) for peripheral nerve regeneration was investigated. MATERIALS AND METHODS: Sixty-two C57BL6 mice were used for peripheral nerve regeneration with a nerve conduit (inner diameter, 1 mm, and length, 7 mm) and an autograft. The mice were randomized into five groups based on the different repairs of nerve defects. In the group of repair with conduits alone (n = 9), a 5-mm sciatic nerve defect was repaired by the nerve conduit. In the group of repair with conduits coated with bFGF (n = 10), SDF-1 (n = 10), and SDF-1/bFGF (n = 10), it was repaired by the nerve conduit with bFGF gelatin, SDF-1 gelatin, and SDF-1/bFGF gelatin, respectively. In the group of repair with autografts (n = 10), it was repaired by the resected nerve itself. The functional recovery, nerve regeneration, angiogenesis, and TGF-ß1 gene expression were assessed. RESULTS: In the conduits coated with SDF-1/bFGF group, the mean sciatic functional index value (-88.68 ± 10.64, p = .034) and the axon number (218.8 ± 111.1, p = .049) were significantly higher than the conduit alone group, followed by the autograft group; in addition, numerous CD34-positive cells and micro vessels were observed. TGF-ß1 gene expression relative values in the conduits with SDF-1/bFGF group at 3 days (7.99 ± 5.14, p = .049) significantly increased more than the conduits alone group. CONCLUSION: Nerve conduits coated with dual controlled release of SDF-1 and bFGF promoted peripheral nerve regeneration.

Surface Design of Antifouling Vascular Constructs Bearing Biofunctional Peptides for Tissue Regeneration Applications.

Antifouling polymer layers containing extracellular matrix-derived peptide motifs offer promising new options for biomimetic surface engineering. In this contribution, we report the design of antifouling vascular grafts bearing biofunctional peptide motifs for tissue regeneration applications based on hierarchical polymer brushes. Hierarchical diblock poly(methyl ether oligo(ethylene glycol) methacrylate-block-glycidyl methacrylate) brushes bearing azide groups (poly(MeOEGMA-block-GMA-N3)) were grown by surface-initiated atom transfer radical polymerization (SI-ATRP) and functionalized with biomimetic RGD peptide sequences. Varying the conditions of copper-catalyzed alkyne-azide "click" reaction allowed for the immobilization of RGD peptides in a wide surface concentration range. The synthesized hierarchical polymer brushes bearing peptide motifs were characterized in detail using various surface sensitive physicochemical methods. The hierarchical brushes presenting the RGD sequences provided excellent cell adhesion properties and at the same time remained resistant to fouling from blood plasma. The synthesis of anti-fouling hierarchical brushes bearing 1.2 × 103 nmol/cm2 RGD biomimetic sequences has been adapted for the surface modification of commercially available grafts of woven polyethylene terephthalate (PET) fibers. The fiber mesh was endowed with polymerization initiator groups via aminolysis and acylation reactions optimized for the material. The obtained bioactive antifouling vascular grafts promoted the specific adhesion and growth of endothelial cells, thus providing a potential avenue for endothelialization of artificial conduits.

Repair strategies for traumatic spinal cord injury, with special emphasis on novel biomaterial-based approaches.

As a part of the central nervous system (CNS), the adult mammalian spinal cord displays only very poor ability for self-repair in response to traumatic lesions, which mostly lead to more or less severe, life-long disability. While even adult CNS neurons have a certain plastic potential, their intrinsic regenerative capacity highly varies among different neuronal populations and in the end, regeneration is almost completely inhibited due to extrinsic factors such as glial scar and cystic cavity formation, excessive and persistent inflammation, presence of various inhibitory molecules, and absence of trophic support and of a growth-supportive extracellular matrix structure. In recent years, a number of experimental animal models have been developed to overcome these obstacles. Since all those studies based on a single approach have yielded only relatively modest functional recovery, it is now consensus that different therapeutic approaches will have to be combined to synergistically overcome the multiple barriers to CNS regeneration, especially in humans. In this review, we particularly emphasize the hope raised by the development of novel, implantable biomaterials that should favor the reconstruction of the damaged nervous tissue, and ultimately allow for functional recovery of sensorimotor functions. Since human spinal cord injury pathology depends on the vertebral level and the severity of the traumatic impact, and since the timing of application of the different therapeutic approaches appears very important, we argue that every case will necessitate individual evaluation, and specific adaptation of therapeutic strategies.

Nerve repair and regeneration: Biological tubulization limits and future perspectives.

Peripheral nerve physiology and regeneration has been observed and investigated in literature but surgical applications to reconstruct and restore motor or sensory functions are still in a developmental phase. The peripheral nerve progresses slowly and incompletely compared with other tissues, it may provoke separations of the nerve stumps and the axonal proliferation of the conduits is restricted to 30 mm. Recent surgical attempts to treat proximal nerve injures include direct nerve restoration, transfer, and autografting measures with favorable results. Moreover, studies are suggesting that engineering tissue tubes maybe as effective as nerve grafting to restore separations of more than 4 cm toward optimal nerve repair.

Biologically Inspired Scaffolds for Heart Valve Tissue Engineering via Melt Electrowriting.

Heart valves are characterized to be highly flexible yet tough, and exhibit complex deformation characteristics such as nonlinearity, anisotropy, and viscoelasticity, which are, at best, only partially recapitulated in scaffolds for heart valve tissue engineering (HVTE). These biomechanical features are dictated by the structural properties and microarchitecture of the major tissue constituents, in particular collagen fibers. In this study, the unique capabilities of melt electrowriting (MEW) are exploited to create functional scaffolds with highly controlled fibrous microarchitectures mimicking the wavy nature of the collagen fibers and their load-dependent recruitment. Scaffolds with precisely-defined serpentine architectures reproduce the J-shaped strain stiffening, anisotropic and viscoelastic behavior of native heart valve leaflets, as demonstrated by quasistatic and dynamic mechanical characterization. They also support the growth of human vascular smooth muscle cells seeded both directly or encapsulated in fibrin, and promote the deposition of valvular extracellular matrix components. Finally, proof-of-principle MEW trileaflet valves display excellent acute hydrodynamic performance under aortic physiological conditions in a custom-made flow loop. The convergence of MEW and a biomimetic design approach enables a new paradigm for the manufacturing of scaffolds with highly controlled microarchitectures, biocompatibility, and stringent nonlinear and anisotropic mechanical properties required for HVTE.

Biodegradable silver-loaded polycation modified nanodiamonds/polyurethane scaffold with improved antibacterial and mechanical properties for cartilage tissue repairing.

For cartilage tissue repairing, it remains a key challenge to design implant materials with antibacterial activity, proper degradation rate and mechanical property. In this research, antibacterial nanodiamonds (QND, QND-Ag) modified acrylate-terminated polyurethanes (APU) were prepared. By the addition of nanocomposites, the crystallinity of modified APU obviously increased, which indicates a strong interaction between NDs and APU. Tensile and compression tests were carried out to evaluate the improved mechanical properties. Compared with APU, APU(10%PEG)/QND-Ag possessed the increased modulus and strength, a nevertheless slight decrease in elongation at break. Due to the dual actions of contact-killing of cationic polymers and release-killing of the Ag NPs, QND-Ag-containing polyurethane showed excellent antibacterial activity against Staphylococcus aureus. Moreover, APU containing polyethylene glycol showed a significant increase in degradability rates. Consequently, owing to the dual effect of crystallinity and hydrophilicity, our modified APU exhibited the proper degradation rate adaptable to the healing rate of cartilage tissue. Furthermore, the CCK-8 results demonstrated that synthesized samples were low toxic. Therefore, APU(10%PEG)/QND-Ag holds great promise for the application of cartilage tissue repairing.

Poly-ε-lysine based hydrogels as synthetic substrates for the expansion of corneal endothelial cells for transplantation.

Dysfunction of the corneal endothelium (CE) resulting from progressive cell loss leads to corneal oedema and significant visual impairment. Current treatments rely upon donor allogeneic tissue to replace the damaged CE. A donor cornea shortage necessitates the development of biomaterials, enabling in vitro expansion of corneal endothelial cells (CECs). This study investigated the use of a synthetic peptide hydrogel using poly-ε-lysine (pεK), cross-linked with octanedioic-acid as a potential substrate for CECs expansion and CE grafts. PεK hydrogel properties were optimised to produce a substrate which was thin, transparent, porous and robust. A human corneal endothelial cell line (HCEC-12) attached and grew on pεK hydrogels as confluent monolayers after 7 days, whereas primary porcine CECs (pCECs) detached from the pεK hydrogel. Pre-adsorption of collagen I, collagen IV and fibronectin to the pεK hydrogel increased pCEC adhesion at 24 h and confluent monolayers formed at 7 days. Minimal cell adhesion was observed with pre-adsorbed laminin, chondroitin sulphate or commercial FNC coating mix (fibronectin, collagen and albumin). Functionalisation of the pεK hydrogel with synthetic cell binding peptide H-Gly-Gly-Arg-Gly-Asp-Gly-Gly-OH (RGD) or α2ß1 integrin recognition sequence H-Asp-Gly-Glu-Ala-OH (DGEA) resulted in enhanced pCEC adhesion with the RGD peptide only. pCECs grown in culture at 5 weeks on RGD pεK hydrogels showed zonula occludins 1 staining for tight junctions and expression of sodium-potassium adenosine triphosphase, suggesting a functional CE. These results demonstrate the pεK hydrogel can be tailored through covalent binding of RGD to provide a surface for CEC attachment and growth. Thus, providing a synthetic substrate with a therapeutic application for the expansion of allogenic CECs and replacement of damaged CE.

Implantation of a Matrigel-loaded agarose scaffold promotes functional regeneration of axons after spinal cord injury in rat.

An agarose scaffold can be useful for supporting and guiding injured axons after spinal cord injury (SCI), but the electrophysiological signal of regenerated axon in scaffolds has not yet been determined. The current study investigated whether a Matrigel-loaded agarose scaffold would enhance the regeneration of axons after SCI. Moreover, the functional connectivity of regenerated axons within the channels of the scaffold was evaluated by directly recording motor evoked potentials. Our data showed that the agarose scaffold containing Matrigel can support and enhance linearly organized axon regeneration after SCI. Additionally, motor evoked potentials were successfully recorded from regenerated axons. These results demonstrate that an agarose scaffold loaded with Matrigel could promote the regeneration of axons and guide the reconnection of functional axons after SCI.

Microsphere-Based Scaffolds in Regenerative Engineering.

Microspheres have long been used in drug delivery applications because of their controlled release capabilities. They have increasingly served as the fundamental building block for fabricating scaffolds for regenerative engineering because of their ability to provide a porous network, offer high-resolution control over spatial organization, and deliver growth factors/drugs and/or nanophase materials. Because they provide physicochemical gradients via spatiotemporal release of bioactive factors and nanophase ceramics, microspheres are a desirable tool for engineering complex tissues and biological interfaces. In this review we describe various methods for microsphere fabrication and sintering, and elucidate how these methods influence both micro- and macroscopic scaffold properties, with a special focus on the nature of sintering. Furthermore, we review key applications of microsphere-based scaffolds in regenerating various tissues. We hope to inspire researchers to join a growing community of investigators using microspheres as tissue engineering scaffolds so that their full potential in regenerative engineering may be realized.

Enhanced neural stem cell functions in conductive annealed carbon nanofibrous scaffolds with electrical stimulation.

Carbon-based nanomaterials have shown great promise in regenerative medicine because of their unique electrical, mechanical, and biological properties; however, it is still difficult to engineer 2D pure carbon nanomaterials into a 3D scaffold while maintaining its structural integrity. In the present study, we developed novel carbon nanofibrous scaffolds by annealing electrospun mats at elevated temperature. The resultant scaffold showed a cohesive structure and excellent mechanical flexibility. The graphitic structure generated by annealing renders superior electrical conductivity to the carbon nanofibrous scaffold. By integrating the conductive scaffold with biphasic electrical stimulation, neural stem cell proliferation was promoted associating with upregulated neuronal gene expression level and increased microtubule-associated protein 2 immunofluorescence, demonstrating an improved neuronal differentiation and maturation. The findings suggest that the integration of the conducting carbon nanofibrous scaffold and electrical stimulation may pave a new avenue for neural tissue regeneration.

3D fiber deposited polymeric scaffolds for external auditory canal wall.

The external auditory canal (EAC) is an osseocartilaginous structure extending from the auricle to the eardrum, which can be affected by congenital, inflammatory, and neoplastic diseases, thus reconstructive materials are needed. Current biomaterial-based approaches for the surgical reconstruction of EAC posterior wall still suffer from resorption (biological) and extrusion (synthetic). In this study, 3D fiber deposited scaffolds based on poly(ethylene oxide terephthalate)/poly(butylene terephthalate) were designed and fabricated to replace the EAC wall. Fiber diameter and scaffold porosity were optimized, leading to 200 ± 33 µm and 55% ± 5%, respectively. The mechanical properties were evaluated, resulting in a Young's modulus of 25.1 ± 7.0 MPa. Finally, the EAC scaffolds were tested in vitro with osteo-differentiated human mesenchymal stromal cells (hMSCs) with different seeding methods to produce homogeneously colonized replacements of interest for otologic surgery. This study demonstrated the fabrication feasibility of EAC wall scaffolds aimed to match several important requirements for biomaterial application to the ear under the Tissue Engineering paradigm, including shape, porosity, surface area, mechanical properties and favorable in vitro interaction with osteoinduced hMSCs. This study demonstrated the fabrication feasibility of outer ear canal wall scaffolds via additive manufacturing. Aimed to match several important requirements for biomaterial application to ear replacements under the Tissue Engineering paradigm, including shape, porosity and pore size, surface area, mechanical properties and favorable in vitro interaction with osteo-differentiated mesenchymal stromal cells.

The Use of Integra® Dermal Regeneration Template for the Orbital Exenteration Socket: A Novel Technique.

PURPOSE: Integra® dermal regeneration template is a bilayer membrane system that acts as a scaffold for regenerating dermal skin cells. It is used for wound reconstruction following burns, extensive injuries, and a large tumor excision in multiple parts of the body. The dermal layer is made of porous matrix of bovine tendon collagen and glycosaminoglycan. The epidermal layer is made of polysiloxane layer. In this study, the authors evaluated the use of Integra® dermal regeneration template for the immediate reconstruction of the orbital exenteration socket. METHODS: Five patients who underwent exenteration and immediate reconstruction of the socket with Integra® dermal regeneration template were included in this study. Demographic and clinical features, healing time, complications, and follow-up time were recorded. RESULTS: The study included 4 male patients and 1 female patient with a mean age of 74 years (range, 49-87 years). The primary diagnoses were orbital extension of conjunctival melanoma in 2 patients, squamous cell carcinoma in 1 patient, and uveal melanoma in 1 patient, and aggressive orbital Wegener granulomatosis in 1 patient. There was no postoperative infection, necrosis, hematoma, or fluid accumulation in any patients. The mean postoperative follow-up period was 20 months (range, 11-42 months). The sockets were completely granulated by 4 weeks, and epithelized, getting ready for the prosthesis in 8 weeks. CONCLUSIONS: Integra® dermal regeneration template can be used for the immediate reconstruction of the socket following exenteration. It is easy to use, and provides a short healing time without any need for any additional reconstructive procedures.

Sugar-based collagen membrane cross-linking increases barrier capacity of membranes.

OBJECTIVES: This study examines the permeability and barrier capacity of a sugar cross-linked resorbable collagen membrane ex vivo and in vivo. MATERIALS AND METHODS: In an ex vivo study, injectable platelet-rich fibrin (i-PRF), a peripheral blood-derived human leukocyte-and-platelet-rich plasma was used to analyze membrane permeability. in vivo subcutaneous implantation in Wistar rats (n = 4 per time point and group) was used to investigate the barrier capacity of the membrane. The induced in vivo cellular reaction was evaluated at 3, 15, and 30 days and compared to sham OP (control) without biomaterial using histological, immunohistochemical, and histomorphometric methods. RESULTS: Ex vivo, the membrane was impenetrable to leukocytes, platelets, and fibrin from peripheral human blood concentrate (PRF). In vivo, the membrane maintained its structure and remained impervious to cells, connective tissue, and vessels over 30 days. CD-68-positive cell (macrophage) numbers significantly decreased from 3 to 15 days, while from day 15 onwards, the number of multinucleated giant cells (MNGCs) increased significantly. Correspondingly, a rise in implantation bed vascularization from 15 to 30 days was observed. However, no signs of degradation or material breakdown were observed at any time point. CONCLUSION: Ex vivo and in vivo results showed material impermeability to cellular infiltration of human and murine cells, which highlights the membrane capacity to serve as a barrier over 30 days. However, whether the induced MNGCs will lead to material degradation or encapsulation over the long term requires further investigation. CLINICAL RELEVANCE: The data presented are of great clinical interest, as they contribute to the ongoing discussion concerning to what extent an implanted material should be integrated versus serving only as a barrier membrane.

3D Mimicry of Native-Tissue-Fiber Architecture Guides Tendon-Derived Cells and Adipose Stem Cells into Artificial Tendon Constructs.

Tendon and ligament (T/L) function is intrinsically related with their unique hierarchically and anisotropically organized extracellular matrix. Their natural healing capacity is, however, limited. Here, continuous and aligned electrospun nanofiber threads (CANT) based on synthetic/natural polymer blends mechanically reinforced with cellulose nanocrystals are produced to replicate the nanoscale collagen fibrils grouped into microscale collagen fibers that compose the native T/L. CANT are then incrementally assembled into 3D hierarchical scaffolds, resulting in woven constructions, which simultaneously mimic T/L nano-to-macro architecture, nanotopography, and nonlinear biomechanical behavior. Biological performance is assessed using human-tendon-derived cells (hTDCs) and human adipose stem cells (hASCs). Scaffolds nanotopography and microstructure induce a high cytoskeleton elongation and anisotropic organization typical of tendon tissues. Moreover, the expression of tendon-related markers (Collagen types I and III, Tenascin-C, and Scleraxis) by both cell types, and the similarities observed on their expression patterns over time suggest that the developed scaffolds not only prevent the phenotypic drift of hTDCs, but also trigger tenogenic differentiation of hASCs. Overall, these results demonstrate a feasible approach for the scalable production of 3D hierarchical scaffolds that exhibit key structural and biomechanical properties, which can be advantageously explored in acellular and cellular T/L TE strategies.

Implantable Sensors for Regenerative Medicine.

The translation of many tissue engineering/regenerative medicine (TE/RM) therapies that demonstrate promise in vitro are delayed or abandoned due to reduced and inconsistent efficacy when implemented in more complex and clinically relevant preclinical in vivo models. Determining mechanistic reasons for impaired treatment efficacy is challenging after a regenerative therapy is implanted due to technical limitations in longitudinally measuring the progression of key environmental cues in vivo. The ability to acquire real-time measurements of environmental parameters of interest including strain, pressure, pH, temperature, oxygen tension, and specific biomarkers within the regenerative niche in situ would significantly enhance the information available to tissue engineers to monitor and evaluate mechanisms of functional healing or lack thereof. Continued advancements in material and fabrication technologies utilized by microelectromechanical systems (MEMSs) and the unique physical characteristics of passive magnetoelastic sensor platforms have created an opportunity to implant small, flexible, low-power sensors into preclinical in vivo models, and quantitatively measure environmental cues throughout healing. In this perspective article, we discuss the need for longitudinal measurements in TE/RM research, technical progress in MEMS and magnetoelastic approaches to implantable sensors, the potential application of implantable sensors to benefit preclinical TE/RM research, and the future directions of collaborative efforts at the intersection of these two important fields.

Correction of Angular Deformities Due to Focal Fibrocartilaginous Dysplasia Using Guided Growth: A Preliminary Report.

BACKGROUND: Focal fibrocartilaginous dysplasia (FFCD) is a rare benign disorder that may result in tethering of the physis. These most commonly occur around the knee and may result in angular deformities of the involved extremity. To date treatment has ranged from observation, to curettage, to osteotomy. Our goal with this study is to evaluate the efficacy of guided growth in treating patients with angular deformity due to FFCD. METHODS: This is a retrospective review, we included 3 patients with angular deformities due to FFCD who had undergone 8 plate placement. We reviewed their preoperative and postoperative radiographs, assessed their sagittal and coronal balance and number of procedures. RESULTS: Three patients with FFCD of the femur with an average of 14 months underwent guided growth to correct their angular deformity. Once appropriate correction was achieved the hardware was removed. At final follow-up none of the patients required further surgical intervention for their angular deformity nor had they shown any evidence of recurrence. CONCLUSIONS: FFCD is a rare benign disorder, they most commonly affects the proximal tibia and distal femur and can result in significant angular deformities. Our review of the literature found all of the cases involving the femur progressed to the point where they needed surgical intervention. This ranged from curettage to osteotomy. In this case series we present 3 cases of FFCD of the distal femur that were treated minimally invasively with guided growth. LEVEL OF EVIDENCE: Level 4.