Combination of physico-chemical analysis, Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay/nuclear abnormalities tests for cyto-genotoxicity assessments of treated effluents discharged from textile industries.

Bioassays for cyto-genotoxicity assessments are generally not required in current textile industry effluent discharge management regulations. The present study applied in vivo plant and fish based toxicity tests viz. Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay and nuclear abnormalities tests in combination with physico-chemical analysis for assessing potential cytotoxic/genotoxic impacts of treated textile industry effluents reaching a major river (Kelani River) in Sri Lanka. Of the treated effluents tested from two textile industries, color in the Textile industry 1 effluents occasionally and color, biochemical oxygen demand and chemical oxygen demand in the Textile industry 2 effluents frequently exceeded the specified Sri Lankan tolerance limits for discharge of industrial effluents into inland surface waters. Exposure of A. cepa bulbs to 100% and 12.5% treated effluents from both industries resulted in statistically significant root growth retardation, mito-depression, and induction of chromosomal abnormalities in root meristematic cells in comparison to the dilution water in all cases demonstrating cyto-genotoxicity associated with the treated effluents. Exposure of O. niloticus to the 100% and 12.5% effluents, resulted in erythrocytic genetic damage as shown by elevated total comet scores and induction of nuclear abnormalities confirming the genotoxicity of the treated effluents even with 1:8 dilution. The results provide strong scientific evidence for the crucial necessity of incorporating cyto-genotoxicity impact assessment tools in textile industry effluent management regulations considering human health and ecological health of the receiving water course under chronic exposure.

Carbon prices and incentives for technological development.

There is concern that the carbon prices generated through climate policies are too low to create the incentives necessary to stimulate technological development. This paper empirically analyzes how the Swedish carbon dioxide (CO2) tax and the European Union emission trading system (EU ETS) have affected productivity development in the Swedish pulp and paper industry 1998-2008. A Luenberger total factor productivity (TFP) indicator is computed using data envelopment analysis. The results show that climate policy had a modest impact on technological development in the pulp and paper industry, and if significant it was negative. The price of fossil fuels, on the contrary, seems to have created important incentives for technological development. Hence, the results suggest that the carbon prices faced by the industry through EU ETS and the CO2 tax have been too low. Even though the data for this study is specific for Sweden, the models and results are applicable internationally. When designing policy to mitigate CO2 emissions, it is vital that the policy creates a carbon price that is high enough - otherwise the pressure on technological development will not be sufficiently strong.

Heterogeneity of the environmental regulation of industrial wastewater: European wineries.

The European legislation of the pollution of industrial wastewater shows a high degree of heterogeneity. This fact implies that there is a market failure with relevant consequences. Within the European Union, each Member State performs a specific transposition of the Water Framework Directive 2000/60. The member states introduce different sanitation fees to correct water pollution. In this paper, the case of the European wine industry is analyzed. It studies the sanitation fees of the five major wine producing countries: France, Italy, Spain, Germany and Portugal. Results show significant differences among the wastewater fees and the study reveals how such heterogeneity leads to relevant market distortions. The research concludes that more homogeneous environmental regulation would promote more sustainable wine production processes with more efficient water management and purification systems, as well as the introduction of cutting edge technologies.

Radiation safety during remediation of the SevRAO facilities: 10 years of regulatory experience.

In compliance with the fundamentals of the government's policy in the field of nuclear and radiation safety approved by the President of the Russian Federation, Russia has developed a national program for decommissioning of its nuclear legacy. Under this program, the State Atomic Energy Corporation 'Rosatom' is carrying out remediation of a Site for Temporary Storage of spent nuclear fuel (SNF) and radioactive waste (RW) at Andreeva Bay located in Northwest Russia. The short term plan includes implementation of the most critical stage of remediation, which involves the recovery of SNF from what have historically been poorly maintained storage facilities. SNF and RW are stored in non-standard conditions in tanks designed in some cases for other purposes. It is planned to transport recovered SNF to PA 'Mayak' in the southern Urals. This article analyses the current state of the radiation safety supervision of workers and the public in terms of the regulatory preparedness to implement effective supervision of radiation safety during radiation-hazardous operations. It presents the results of long-term radiation monitoring, which serve as informative indicators of the effectiveness of the site remediation and describes the evolving radiation situation. The state of radiation protection and health care service support for emergency preparedness is characterized by the need to further study the issues of the regulator-operator interactions to prevent and mitigate consequences of a radiological accident at the facility. Having in mind the continuing intensification of practical management activities related to SNF and RW in the whole of northwest Russia, it is reasonable to coordinate the activities of the supervision bodies within a strategic master plan. Arrangements for this master plan are discussed, including a proposed programme of actions to enhance the regulatory supervision in order to support accelerated mitigation of threats related to the nuclear legacy in the area.

Assessment of public perception and environmental compliance at a pulp and paper facility: a Canadian case study.

Communities across Canada rely heavily on natural resources for their livelihoods. One such community in Pictou County, Nova Scotia, has both benefited and suffered, because of its proximity to a pulp and paper mill (currently owned by Northern Pulp). Since production began in 1967, there have been increasing impacts to the local environment and human health. Environmental reports funded by the mill were reviewed and compared against provincial and federal regulatory compliance standards. Reports contrasted starkly to societal perceptions of local impacts and independent studies. Most environmental monitoring reports funded by the mill indicate some levels of compliance in atmospheric and effluent emissions, but when compliance targets were not met, there was a lack of regulatory enforcement. After decades of local pollution impacts and lack of environmental compliance, corporate social responsibility initiatives need implementing for the mill to maintain its social licence to operate.

Beyond regulations: industry voluntary ban in arsenic use.

Firms play a key role in pollution abatement and control by engaging in beyond-compliance actions without the force of law in voluntary programs. This study examines the effectiveness of a bilateral voluntary agreement, one type of voluntary programs, negotiated between the U.S. Environmental Protection Agency (EPA) and the pressure-treated wood industry to phase-out the use of chromated copper arsenate (CCA), a poisonous arsenic compound. Arsenic is ranked number one on the EPA's priority list of hazardous substances. Unlike a majority of earlier studies on voluntary programs, dynamic panel estimation and structural break analysis show that while a technological innovation in semiconductors is associated with arsenic use increases, the CCA voluntary agreement is associated with a reduction in arsenic use to levels not seen since the 1920s. A voluntary ban in arsenic acid by pesticide manufacturers in the agriculture sector has also contributed to arsenic reductions. Furthermore, the results suggest that environmental activism has played a role in curbing arsenic use. Increasing stakeholder pressures, as measured by membership in the Sierra Club, improves voluntary agreement effectiveness.

Construction and demolition waste indicators.

The construction industry is one of the biggest and most active sectors of the European Union (EU), consuming more raw materials and energy than any other economic activity. Furthermore, construction waste is the commonest waste produced in the EU. Current EU legislation sets out to implement construction and demolition waste (CDW) prevention and recycling measures. However it lacks tools to accelerate the development of a sector as bound by tradition as the building industry. The main objective of the present study was to determine indicators to estimate the amount of CDW generated on site both globally and by waste stream. CDW generation was estimated for six specific sectors: new residential construction, new non-residential construction, residential demolition, non-residential demolition, residential refurbishment, and non-residential refurbishment. The data needed to develop the indicators was collected through an exhaustive survey of previous international studies. The indicators determined suggest that the average composition of waste generated on site is mostly concrete and ceramic materials. Specifically for new residential and new non-residential construction the production of concrete waste in buildings with a reinforced concrete structure lies between 17.8 and 32.9 kg m(-2) and between 18.3 and 40.1 kg m(-2), respectively. For the residential and non-residential demolition sectors the production of this waste stream in buildings with a reinforced concrete structure varies from 492 to 840 kg m(-2) and from 401 to 768 kg/m(-2), respectively. For the residential and non-residential refurbishment sectors the production of concrete waste in buildings lies between 18.9 and 45.9 kg/m(-2) and between 18.9 and 191.2 kg/m(-2), respectively.

Investigation of spatial association network features of construction waste in major Chinese urban agglomeration.

The illegal dumping of construction waste (CW) poses an increasingly serious environmental pollution problem with the accelerated rate of urbanization. As CW disposal capacity struggles to match municipal needs, some CW is being diverted to higher resource endowment cities rather than recycled. To address this situation, it is necessary to obtain reliable information on the characteristics and evolution of CW generation networks in China. This study combines a modified gravity model with Social Network Analysis (SNA) to analyze the spatial association networks of CW generation in four Chinese urban agglomerations between 2000 and 2020. Results reveal the evolution characteristics of the CW generation network, including increasing density and correlation and decreasing network efficiency. Furthermore, the Quality Assurance Procedure (QAP) indicates that urbanization level and population size are positively correlated with CW generations, whereas distance plays a negative role, but resources are insignificant for network formation. The findings provide insight into current patterns of waste distribution and a theoretical basis for government policy formulation in the future.

Business waste prevention: a review of the evidence.

Waste prevention is a policy priority in many countries. For example, European Union member states are currently required to prepare a national Waste Prevention Programme. This article reports on a major international review of the evidence base for business waste prevention to underpin such policy-making. A strict definition of waste prevention is used, including waste avoidance, waste reduction at source or in process, and product reuse-recycling is outside the scope of this article. The review was organised with two key dimensions. Eight types of policy intervention were identified: standards, labelling, procurement, commitments and voluntary agreements, communication, incentives, waste minimisation clubs and other business support. Six illustrative sectors were selected: construction and demolition, food and drink, hospitality, retail, automotive and office-based services. Four broad approaches to business waste prevention have been distinguished and used as part of the analytical framework, classified into a two by two matrix, using supply- and demand-side drivers as one axis, and incremental versus radical change as the other. A fundamental focus was on attitudes and behaviours. A conceptual framework is presented to navigate the various behavioural influences on businesses, and to discuss those motivations and barriers for which the evidence is relatively robust. The results suggest that the (financial) benefits to business of waste prevention are potentially huge, and that some progress is being made, but measurement is a challenge. A taster of some of the learnings on the effectiveness of the different policy interventions to promote waste prevention is also presented.

Environmental issues and management strategies for waste electronic and electrical equipment.

Issues surrounding the impact and management of discarded or waste electronic and electrical equipment (WEEE) have received increasing attention in recent years. This attention stems from the growing quantity and diversity of electronic and electrical equipment (EEE) used by modern society, the increasingly rapid turnover of EEE with the accompanying burden on the waste stream, and the occurrence of toxic chemicals in many EEE components that can pose a risk to human and environmental health if improperly managed. In addition, public awareness of the WEEE or "e-waste" dilemma has grown in light of popular press features on events such as the transition to digital television and the exportation of WEEE from the United States and other developed countries to Africa, China, and India, where WEEE has often not been managed in a safe manner (e.g., processed with proper safety precautions, disposed of in a sanitary landfill, combusted with proper air quality procedures). This paper critically reviews current published information on the subject of WEEE. The definition, magnitude, and characteristics of this waste stream are summarized, including a detailed review of the chemicals of concern associated with different components and how this has changed and continues to evolve over time. Current and evolving management practices are described (e.g., reuse, recycling, incineration, landfilling). This review discusses the role of regulation and policies developed by governments, institutions, and product manufacturers and how these initiatives are shaping current and future management practices.

Efficacy and reliability of upgraded industrial treatment plant at Porto Marghera, near Venice, Italy, in removing nutrients and dangerous micropollutants from petrochemical wastewaters.

Chemical and petrochemical wastewaters contain a host of contaminants that require different treatment strategies. Regulation of macropollutants and micropollutants in the final discharge from industrial wastewater treatment plants (WWTPs) have become increasingly stringent in recent decades, requiring many WWTPs to be upgraded. This article presents an analysis of a WWTP treating petrochemicals in Porto Marghera, Italy, that recently was upgraded following legislative changes. Because of strict legal limits for macropollutants and micropollutants and a lack of space necessary for a full-scale WWTP overhaul, the existing activated sludge tank was converted into a membrane biological reactor. The paper presents experimental data collected during a five-month investigation showing the removal rates achieved by the upgraded plant for macropollutants (particularly nitrogen compounds) and micropollutants (heavy metals and organic and inorganic toxic compounds).

[Problems due to the prolonged permanence of asbestos-containing materials]. / Le problematiche connesse con il perdurare della presenza di manufatti contenenti amianto.

In 1992 a law banned excavation, importation, production and trade of new asbestos-containing materials. Nonetheless the use of already made asbestos-containing materials hadn't been banned. Now it's time to think about the possible health impact on the Italian population, and workers in particular, for the prolonged permanence of asbestos-containing materials, in civil and industrial areas.

Extended producer responsibility for packaging wastes and WEEE - a comparison of implementation and the role of local authorities across Europe.

A comparison of the implementation of extended producer responsibility (EPR) to packaging waste and waste electrical and electronic equipment (WEEE) is presented for a representative sample of eleven European Union countries based on five indicators: stakeholders and responsibilities; compliance mechanisms; role of local authorities; financing mechanisms and merits and limitations, with four countries selected for more detailed case study analysis. Similarities, trends and differences in national systems are highlighted with particular focus on the role of local authorities and their relationship with obligated producers and the effect on the operation and success of each system. The national systems vary considerably in design, in terms of influence of pre-existing policy and systems, methods of achieving producer compliance (multiple or single collective schemes), fee structures, targets, waste stream prioritization and local authority involvement. Differing approaches are evident across all member states with respect to the role played by local authorities, responsibility apportioned to them, and the evolution of working relationships between obligated producers and municipalities. On the whole, EPR for packaging and WEEE has been successfully implemented throughout Europe in terms of Directive targets. It is, however, clear that the EPR systems currently in application across Europe differ primarily due to contrasting opinion on the legitimacy of local authorities as stakeholders and, in some cases, a fear on the part of industry of associated costs. Where local authorities have been engaged in the design and implementation of national systems, existing infrastructure used and defined roles established for producers and local authorities, results have been significantly more positive than in the cases where local authorities have had limited engagement.

How to successfully implement extended producer responsibility: considerations from an economic point of view.

This paper investigates the concept of extended producer responsibility (EPR) from an economic point of view. Particular importance will be placed on the concept of 'economic feasibility' of an EPR policy, which should guide decision-making in this context. Moreover, the importance of the core EPR principle of 'integrating signals throughout the product chain' into the incentive structure will be demonstrated with experiences from Germany. These examples refer to sales packaging consumption, refillable drinks packages and waste electrical and electronic equipment collection. As a general conclusion, the interaction between economic principles and technological development needs to be observed carefully when designing incentive-compatible EPR policies.