Green loops and clean skies: Optimizing municipal solid waste management using data science for a circular economy.

The interplay between Municipal Solid Waste (MSW) Management and data science unveils a panorama of opportunities and challenges, set against the backdrop of rising global waste and evolving technological landscapes. This article threads through the multifaceted aspects of incorporating data science into MSW management, unearthing key findings, novel knowledge, and instigating a call to action for stakeholders (e.g. policymakers, local authorities, waste management professionals, technology developers, and the general public) across the spectrum. Predominant challenges like the enigmatic nature of "black-box" models and tangible knowledge gaps in the sector are scrutinized, ushering in a narrative that emphasizes transparent, stakeholder-inclusive, and policy-adaptive approaches. Notably, a conscious shift towards "white-box" and "grey-box" data science models has been spotlighted as a pivotal response to transparency issues. Furthermore, the discourse highlights the necessity of crafting data science solutions that are specifically moulded to the nuanced challenges of MSW management, and it underscores the importance of recalibrating existing policies to be reflexive to technological advancements. A resolute call echoes for stakeholders to not just adapt but immerse themselves in a continuous learning trajectory, championing transparency, and fostering collaborations that hinge on innovative, data-driven methodologies. Thus, as the realms of data science and MSW management entwine, the article sheds light on the potential transformation awaiting waste management paradigms, contingent on the nurtured amalgamation of technological advances, policy alignment, and collaborative synergy.

A systematic review of coastal zone integrated waste management for sustainability strategies.

Coastal areas stand out because of their rich biodiversity and high tourist potential due to their privileged geographical position. However, one of the main problems in these areas is the generation of waste and its management, which must consider technical and sustainable criteria. This work aims to conduct a systematic review of the scientific literature on integrated solid waste management (ISWM) by considering scientific publications on the scientific basis for the proposal of sustainability strategies in the context of use and efficiency. The overall method comprises i) Search strategy, merging and processing of the databases (Scopus and Web of Science); ii) Evolution of coastal zone waste management; iii) Systematic reviews on coastal landfills and ISWM in the context of the circular economy; and iv) Quantitative synthesis in integrated waste management. The results show 282 studies focused on coastal landfills and 59 papers on ISWM with the application of circular economy criteria. Systematic reviews allowed for the definition of criteria for the selection of favorable sites, such as i) sites far from the coastline, ii) impermeable soils at their base to avoid contamination of aquifers, iii) use of remote sensing and geographic information system tools for continuous monitoring, iv) mitigation of possible contamination of ecosystems, v) planning the possibility of restoration (reforestation) and protection of the environment. In coastal zones, it is necessary to apply the ISWM approach to avoid landfill flooding and protect the marine environment, reducing rubbish and waste on beaches and oceans. Therefore, applying the circular economy in ISWM is critical to sustainability in coastal environments, with the planet's natural processes and variations due to climate change.

Biohydrogen from waste feedstocks: An energy opportunity for decarbonization in developing countries.

In developing economies, the decarbonization of energy sector has become a global priority for sustainable and cleaner energy system. Biohydrogen production from renewable sources of waste biomass is a good source of energy incentive that reduces the pollution. Biohydrogen has a high calorific value and emits no emissions, producing both energy security and environmental sustainability. Biohydrogen production technologies have become one of the main renewable sources of energy. The present paper entails the role of biohydrogen recovered from waste biomasses like agricultural waste (AW), organic fraction of municipal solid waste (OFMSW), food processing industrial waste (FPIW), and sewage sludge (SS) as a promising solution. The main sources of increasing yield percentage of biohydrogen generation from waste feedstock using different technologies, and process parameters are also emphasized in this review. The production paths for biohydrogen are presented in this review article, and because of advancements in R and D, biohydrogen has gained viability as a biofuel for the future and discusses potential applications in power generation, transportation, and industrial processes, emphasizing the versatility and potential for integration into existing energy infrastructure. The investigation of different biochemical technologies and methods for producing biohydrogen, including anaerobic digestion (AD), dark fermentation (DF), photo fermentation (PF), and integrated dark-photo fermentation (IDPF), has been overviewed. This analysis also discusses future research, investment, and sustainable energy options transitioning towards a low-carbon future, as well as potential problems, economic impediments, and policy-related issues with the deployment of biohydrogen in emerging nations.

Sustainability assessment of biofuel and value-added product from organic fraction of municipal solid waste.

The current study aims to examine the techno-economic and environmental assessment of biorefinery development within a circular bioeconomy context by using an organic fraction of municipal solid waste (OFMSW) by extraction of lipids, carbohydrates, and proteins with 98, 51 and 62 % by mass of conversion efficiency and yield recovery, and value-added fractions production as well. Fatty acid methyl ester (biodiesel) and glycerol (biofuel) were produced by applying transesterification process, and the remaining biomass was converted into biocrude oil by thermal liquefication. The biorefinery using 613 kg of OFMSW produced biodiesel, glycerol, and bioethanol with 126 litter, 14.3 kg, and 172 litter respectively, as well as value-added fractions, such as biocrude oil with 78 kg. The environmental impact was assessed using the life cycle assessment (LCA) framework, ReCiPe2016 Mid-point (H) approach, through 18 different environmental categories. The key findings elucidate that Terrestrial ecotoxicity, Climate change, Fossil depletion and Human toxicity were the main impact categories which are potentially contributed 9.81E+02 kg 1,4-DB eq., 1.43E+03 kg CO2 eq., 2.04E+02 kg oil eq., and 8.08E+01 kg 1,4-DB eq. The normalization (person per equivalent) analysis revealed that only categories of resource reduction (fossil and metal depletion) are the key contributors to environmental degradation. The biorefinery system's total revenue was estimated at USD 6.817,509 million annually. The calculated revenue was USD 0.026 million daily in a shift of 8 h. The Net present worth (NPW) was calculated at USD 499.97 million by assuming a discount factor of 10 % and inflation rate of 5 % for 15 years. The project is considered feasible by demonstrating 7.15 payback year. This research showcased the efficient portrayal of the biorefinery system and succinctly conveyed the significant circular bioeconomy for a greener future. Thus, it could be helpful to the stakeholder's context towards techno-economic and environmental evaluation.

Exploring the hidden chemical landscape: Non-target and suspect screening analysis for investigating solid waste-associated environments.

Solid waste is an inevitable consequence of urbanization. It can be safely managed in municipal landfills and processing plants for volume reduction or material reuse, including organic solid waste. However, solid waste can also be discarded in (un-)authorized dumping sites or inadvertently released into the environment. Legacy and emerging contaminants have the potential to leach from solid waste, making it a significant pathway to the environment. Non-target screening (NTS) and suspect screening analysis (SSA) have become helpful tools in environmental science for the simultaneous analysis of a wide range of chemical compounds. However, the application of these analytical approaches to environmental samples related to Raw or Processed Solid Waste (RPSW) has been largely neglected so far. This perspective review examines the potential and policy relevance of NTS and SSA applied to waste-related samples (liquid, gaseous and solid). It addresses the hurdles associated with the chemical safety of solid waste accumulation, processing, and reuse, and the need for landfill traceability, as well as effectiveness of leachate treatments. We reviewed the current applications of NTS and SSA to environmental samples of RPSW, as well as the potential adaptation of NTS and SSA techniques from related fields, such as oilfield and metabolomics, to the solid waste domain. Despite the ongoing technical challenges, this review highlights the significant potential for the implementation of NTS and SSA approaches in solid waste management and related scientific fields and provides support and guidance to the regulatory authorities.

Characteristics analysis of solid waste generation and carbon emission of beer production in China.

As the largest beer producer and consumer in the world, China's endeavors to reduce solid waste generation (SWG) and carbon emissions (CEs) in the course of beer production assume paramount significance. This study aims to assess the SWG and CEs in beer production within China at both national and provincial levels, and further delves into the spatial distribution characteristics and evolving patterns across the country. Key findings of the study include:(1) Peak SWG and CEs were recorded in 2013, reaching 861.62 million tons and 2315.10 tCO2e, respectively, followed by a consistent decline. (2) Among the three types of solid waste, spent grain exhibited the highest generation rate, contributing to 94.38% of the total. (3) The emergence of China's beer industry dates back to the 1980s in the northeastern region, expanding to the southeastern and the Yangtze River Basin during the 1990s, ultimately extending nationwide. (4) The spatial distribution of beer production revealed significant regional disparities and notable industry concentration. Notably, many provinces witnessed reduced CEs from beer production starting in 2015, although the extent of reduction varied in different provinces. These findings serve as a scientific foundation for formulating emission reduction strategies in beer producing and offer insights for other food industries in China.

Use of municipal solid waste incineration fly ash as a supplementary cementitious material: CO2 mineralization coupled with mechanochemical pretreatment.

The use of municipal solid waste incineration fly ash, commonly referred to as "fly ash", as a supplementary cementitious material (SCM), has been explored to mitigate the CO2 emissions resulting from cement production. Nevertheless, the incorporation of fly ash as an SCM in mortar has been shown to weaken its compressive strength and increase the risk of heavy metal leaching. In light of these challenges, this study aims to comprehensively evaluate the influence of CO2 pressure, temperature, and residual water/binder ratio on the CO2 uptake and compressive strength of mortar when combined with fly ash. Additionally, this study systematically examines the feasibility of mechanochemical pretreatment, which enhances the homogenization of fly ash and augments the density of the mortar's microstructure. The results indicate that the use of mechanochemical pretreatment leads to a notable 43.6% increase in 28-day compressive strength and diminishes the leaching of As, Ba, Ni, Pb, Se, and Zn by 17.9-77.8%. Finally, a reaction kinetics model is proposed to elucidate the CO2 sequestration process under varying conditions. These findings offer valuable guidance for incorporating fly ash as an SCM and CO2 sequestrator in mortar.

Migration patterns of heavy metals from solid waste stockpile soils by native plants for ecological restoration in arid and semi-arid regions of Northwest China.

Ecological remediation with native plants is the main measure to control the pollution of solid waste in Northwest China. However, the heavy metal transport characteristics of these native plants are still unidentified. This study analyzed the distribution of 16 heavy metals in native plants in the desulfurization gypsum yard (DGY), the gangue yard (GY) and the fly ash yard (FAY). The results showed that the soil contained many heavy metals in high concentrations. For instance, As concentrations were comparable to the global soil background values, whereas Cr and Mn concentrations in the area were 2-3 times greater than the global soil background values. The content of heavy metals in the plant root system increased first, then decreased as the distance from the yard increased. Ni, Pb, and Cd migrated well in Artemisia frigida Willd and Artemisia sieversiana Ehrhart ex Willd, with A. sieversiana showing a particularly strong migration in GY. A. sieversiana, on the other hand, was more successful at migrating Cd at DGY and had a similar capability for Mg migration in all three locations. Festuca rubra L was potentially suitable for planting in GY for Ni removal. In conclusion, the migration patterns of different heavy metals were not alike for plants in the three landfills. The results provided a basis for plant selection for ecological restoration in arid and semi-arid regions.

Investigating the characteristics of combustible fraction of legacy waste: A study on energy recovery potential and GHG emission quantification.

In India, majority of the generated municipal solid waste (MSW) was dumped in poorly managed landfills and dumpsites over the past decades and is an environmental and health hazard. Landfill mining is a promising solution to reclaim these sites along with the recovery of resources (materials and energy). During landfill mining operations, the combustible fraction is one of the major components recovered and needs proper management for maximizing resource recovery. For the identification of appropriate resource recovery options, knowledge of the physicochemical characteristics is required. The present study aims to assess the depth-wise change in the composition of legacy waste and the physicochemical characteristics of the combustible fraction. Furthermore, a material flow analysis considering the incineration of combustible fraction was performed to estimate the energy generation potential and the associated greenhouse gas (GHG) emissions. The results of the compositional analysis of dry legacy waste revealed that the fine fraction (<4 mm soil-like material) was dominating with a share of 36%. The depth-wise analysis showed a decrease in the calorific value with increasing landfill depth, while no specific trend was observed for the other parameters analyzed, including proximate and ultimate analysis, and chlorine content. The material flow analysis performed for 100 tonnes of wet legacy waste indicated that 52 tonnes of waste is combustible fraction. The GHG emissions through incineration of one tonne of dry combustible fraction would be 1389 kg CO2-eq, with 1125 kWh of electrical energy generation potential.

Global trends of waste-to-energy (WtE) technologies in carbon neutral perspective: Bibliometric analysis.

Waste-to-energy (WtE) technology is at the forefront of low-carbon municipal solid waste (MSW) treatment. MSW has been favoured by researchers in recent years due to its high potential to dispose of resources with WtE technology, which contributes to the carbon neutrality goal. However, there is a lack of research that integrates MSW WtE treatment from a global perspective and explores its future direction. Bibliometric methods are widely used because of their advantages in qualitative and quantitative literature information analysis. A comprehensive search was conducted in the Web of Science (WOS) Core Collection database, covering the period from 1990-2022, resulting in the collection of 702 articles. Subsequently, bibliometric software such as CiteSpace, VOSviewer, and Bibliometrix, were jointly employed for co-occurrence, co-citation, and cluster analyses, providing an in-depth qualitative and quantitative analysis of the research hotspots and development trends of WtE technology for MSW treatment. The research findings indicate a rapid growth in studies on carbon emission reduction through WtE technology for MSW treatment since 2015, with these related articles accounting for 50% of articles. Globally, China, the United States, Italy, and other countries were active research regions, with Chinese research institutions making the largest contributions. However, contributions from developing countries are limited. Furthermore, this study systematically elaborates on the research hotspots in this field. Finally, this study identified some frontier research hotspots and directions. Research on WtE technology primarily focuses on technological methods and policy management, particularly from the carbon neutrality perspective, emphasis WtE technology sustainability in reducing carbon emissions and achieving carbon neutrality goals. Promoting the use of assisted decision-making models in the MSW management process, and focusing on the conversion of food waste into valuable energy. It is hoped that these research directions will provide new ideas for the balanced and rapid development of WtE technology.

Wet anaerobic digestion of organic fraction of municipal solid waste: experience with long-term pilot plant operation and industrial scale-up.

This paper presents the analysis of a pilot anaerobic digestion plant that operates with organic fraction of municipal solid waste (OFMSW) from a wholesale market and can treat up to 500 kg d-1. The process was monitored for a period of 524 days during which the residue was characterized and the biogas production and methane content were recorded. The organic load rate (OLR) of volatile solids (VS) was 0.89 kg m-3 d-1 and the Hydraulic Retention Time (HRT) was 25 d during the process. The yield was 82 Nm3 tons OFMSW-1 biogas, equivalent to 586 Nm3 tons CH4 VS-1. The results obtained in the pilot plant were used to carry out a technical-economic evaluation of a plant that treats 50 tons of OFMSW from wholesale markets. A production of 3769 Nm3 d-1 of biogas and 2080 Nm3 d-1 of methane is estimated, generating 35.1 MWh d-1 when converted to electricity.

Climate footprint assessment of plastic waste pyrolysis and impacts on the Danish waste management system.

Increased plastic recycling is necessary to reduce environmental impacts related to manufacturing and end-of-life of plastic products, however, mechanical recycling (MR) - currently the most widespread recycling option for plastic waste - is limited by quality requirements for inputs and reduced quality of outputs. In this study, pyrolysis of plastic waste is assessed against MR, municipal solid waste incineration (MSWI) and fuel substitution through climate footprint assessment (CFA) based on primary data from pyrolysis of plastic waste sourced from Danish waste producers. Results of the CFA are scaled to the Danish plastic waste resource in an impact assessment of current Danish plastic waste management, and scenarios are constructed to assess reductions through utilization of pyrolysis. Results of the CFA show highest benefits utilizing pyrolysis for monomer recovery (-1400 and -4800 kg CO2e per ton polystyrene (PS) and polymethyl methacrylate (PMMA), respectively) and MR for single polymer polyolefins (-1000 kg CO2e per ton PE). The two management options perform similarly with mixed plastic waste (200 kg CO2e per ton plastic waste). MSWI has the highest impact (1600-2200 kg CO2e per ton plastic waste) and should be avoided when alternatives are available. Scaling the results of the CFA to the full Danish plastic waste resource reveals an impact of 0.79 Mt CO2e in year 2020 of current plastic waste management. Utilizing pyrolysis to manage MR residues reduces the system impact by 15%. Greater reductions are possible through increased separation of plastic from residual waste. The best performance is achieved through a combination of MR and pyrolysis.

Caste, mistrust and municipal inaction: The interwoven barriers for the integration of waste pickers in India.

Solid waste management in low- and middle-income countries like India faces significant challenges due to the increasing waste generation that surpasses the current capacity. Therefore, the informal waste sector (IWS) is more vital than ever in handling consumer waste alongside municipal solid waste management (SWM) systems. However, the integration of the IWS into formal waste management systems remains unresolved due to adverse social and economic conditions. This study focuses on identifying the root causes that hinder the integration of the IWS in India's waste management system, using the city of Chennai as a case study. Adopting an institutional perspective, we analyse the institutional landscape of the waste management system, considering both formal rules (in policy documents) and informal rules (i.e., social norms and routines). The institutional network analysis reveals a significant misalignment in perceptions among governance levels concerning the integration of the IWS. The study shows a considerable gap between rules-in-form and rules-in-use, leading to 1) Preclusion of waste pickers in collecting door-to-door source-segregated waste (i.e., recyclables). 2) Unfair pricing in transactions with small aggregators. 3) Lack of ID cards for waste pickers. These barriers are ultimately rooted in caste discrimination, misalignment between governance levels, and the exclusion of waste pickers in the policymaking process. In conclusion, understanding and rectifying the institutional gaps and discriminatory practices are essential steps towards effectively integrating the IWS in India's waste management system, promoting a more inclusive and sustainable approach to waste management.

Does gender affect environmentally virtuous behaviour? Evidence from selective waste collection.

This research analyses the issue, unexplored to date, of the causal relationship between women politicians and selective waste collection. Differing attitudes towards environmental issues between men and women may affect waste management at the municipal level, so an increase in women's political representation can be expected to enhance the effectiveness of selective waste collection. The analysis tests for this in Italy, exploiting a gender quota measure (Law 215/2012) as an exogenous shock to the percentage of female municipal councilors. Difference-in-differences instrumental variable analysis finds that an increase of one standard deviation in the percentage of female councilors increases the percentage of selective waste collection by 2.18 percentage points and the total tonnage of selective waste by 447.86. At the same time it reduces the amount of non-selective waste collection by 491.22 tonnes. The study comprises a number of sensitivity analyses for different model specifications, different definitions of dependent variables, different size of municipalities and different geographical areas.

Landfill bacteriology: Role in waste bioprocessing elevated landfill gaseselimination and heat management.

This study delves into the critical role of microbial ecosystems in landfills, which are pivotal for handling municipal solid waste (MSW). Within these landfills, a complex interplay of several microorganisms (aerobic/anaerobic bacteria, archaea or methanotrophs), drives the conversion of complex substrates into simplified compounds and complete mineralization into the water, inorganic salts, and gases, including biofuel methane gas. These landfills have dominant biotic and abiotic environments where various bacterial, archaeal, and fungal groups evolve and interact to decompose substrate by enabling hydrolytic, fermentative, and methanogenic processes. Each landfill consists of diverse bio-geochemical environments with complex microbial populations, ranging from deeply underground anaerobic methanogenic systems to near-surface aerobic systems. These kinds of landfill generate leachates which in turn emerged as a significant risk to the surrounding because generated leachates are rich in toxic organic/inorganic components, heavy metals, minerals, ammonia and xenobiotics. In addition to this, microbial communities in a landfill ecosystem could not be accurately identified using lab microbial-culturing methods alone because most of the landfill's microorganisms cannot grow on a culture medium. Due to these reasons, research on landfills microbiome has flourished which has been characterized by a change from a culture-dependent approach to a more sophisticated use of molecular techniques like Sanger Sequencing and Next-Generation Sequencing (NGS). These sequencing techniques have completely revolutionized the identification and analysis of these diverse microbial communities. This review underscores the significance of microbial functions in waste decomposition, gas management, and heat control in landfills. It further explores how modern sequencing technologies have transformed our approach to studying these complex ecosystems, offering deeper insights into their taxonomic composition and functionality.

Research on oxygen enrichment for municipal solid waste fly ash melting: A pilot-scale study on natural gas and coal as the melting fuel.

High energy consumption is the main obstacle of melting/vitrification technology for the disposal of municipal solid waste incineration fly ash (MSWIFA) for industrial applications. To reduce energy consumption and lower operating costs, oxygen enrichment melting was proposed and studied in this work. This research was conducted in a pilot-scale melting furnace, and three melting conditions were compared and discussed. The results showed that 66% of natural gas was saved and the operating cost was reduced by 55% when oxygen enrichment technology was applied to MSWIFA melting. When coal was used as the fuel with the oxygen enrichment melting technology, the operating cost was even lower at 66.39 dollar/ton of fly ash. Because MSWIFA was a Ca-rich material, the relatively high content of Si and Al in the coal fly ash promoted the formation of vitrificated slag, leading to a reduction in the overall pollution toxicity index (OPTI) of MSWIFA by 99.98%. Meanwhile, SO2, HCl, and secondary fly ash were the main pollutants during MSWIFA melting, and when coal was used as the fuel, the emissions of SO2 and HCl could be reduced and the OPTI of secondary fly ash was suppressed. These results suggested that to obtain the lowest operating cost and reduce secondary pollution during MSWIFA melting, the best option consisted of oxygen enrichment technology with coal as the fuel.

Investigation on trommeled legacy waste from full-scale mining of old dumpsites: Suitable for valorization or scientific disposal?

The burgeoning interest in resource recovery from old dumpsites has significantly propelled the adoption of Landfill Mining (LFM) in recent years. This study is centred around evaluating the quality of materials recovered from the full-scale LFM activities at two major dumpsites in India, focusing on the valorization potential of the segregated legacy waste. A detailed analysis was conducted on the segregated waste fractions based on particle size (-30 mm, 30 to 6 mm, and -6 mm, as sourced from the sites), employing both batch and column leaching methods across a range of liquid-to-solid (L/S) ratios (0.1-10.0 L/kg). The findings reveal a pronounced concentration of contaminants within the -6 mm fraction compared to the 30 to 6 mm and -30 mm fractions. Column leaching tests revealed a reduction in contaminant concentration, correlating with incremental changes in L/S ratio. Notably, this trend remained consistent across varying particle sizes and specific type of contaminants assessed. Notably, color intensity of leachate reduced significantly from 720 to 1640 Platinum Cobalt Units (PCU) at an L/S ratio of 0.1 L/kg to a minimal 94-225 PCU at an L/S of 10 L/kg. Dissolved salts emerged as a primary concern, marking them as significant contaminants in both leaching methods. The analysis confirmed that the segregated fractions comply with the USEPA Waste Acceptance Criteria (WAC), permitting their disposal in non-hazardous waste landfills. However, the elevated presence of dissolved salts, exceeding reuse limits by 5-35 times, limits their open or unrestricted reuse. Despite this, isolated reuse aligns with regulations from the Netherlands and Germany, suggesting viable pathways for compliant utilization. Geotechnical assessments indicate the potential for repurposing the -30 mm fraction as alternative earthfill and construction material. While heavy metal leaching does not pose significant concerns, the prevalent unscientific disposal practices near urban settlements highlight potential human health risks. This investigation enriches the understanding of the physicochemical properties, leaching behaviour, and reuse potential of segregated legacy waste, offering crucial insights for civic authorities in determining appropriate reuse and disposal strategies for such materials.

A systematic comparison of salt removal efficiency in washing treatment by using fly ashes from 13 MSWI plants in China.

Municipal solid waste incineration (MSWI) fly ash contains large amounts of Ca, Si, and other elements, giving it the potential to be used as a raw material for cement production. However, fly ash often contains a high content of salts, which greatly limits its blending ratio during cement production. These salts are commonly removed via water washing, but this process is affected by the nature and characteristics of fly ash. To clarify the influence of the ash characteristics on salt removal, a total of 60 fly ash samples from 13 incineration plants were collected, characterized, and washed. The ash characterization and cluster analysis showed that the incinerator type and flue gas purification technology/process significantly influenced the ash characteristics. Washing removed a high percentage of salts from fly ash, but the removal efficiencies varied significantly from each other, with the chlorine removal efficiency ranging from 73.76% to 96.48%, while the sulfate removal efficiency ranged from 6.92% to 51.47%. Significance analysis further revealed that the salt removal efficiency varied not only between the ash samples from different incinerators, but also between samples collected at different times from the same incinerator. The high variance of the 60 ash samples during salt removal was primarily ascribed to their different mineralogical and chemical characteristics. Mineralogical analysis of the raw and washed ash samples showed that the mineralogical forms and proportion of these salts in each ash sample greatly influenced their removal. The presence of less-soluble and insoluble chloride salts (e.g., CaClOH, Ca2Al(OH)6(H2O)2Cl etc.) in fly ash significantly affected the chlorine removal efficiency. This study also found that Fe, Mn, and Al in fly ash were negatively correlated with the dechlorination efficiency of fly ash. In summary, the different physical and chemical properties of fly ash caused great discrepancies in salt removal. Consequently, it is suggested to consider the potential impact of the ash source and ash generation time on salt removal to ensure a reliable treatment efficiency for engineering applications.

Using landfill leachate to indicate the chemical and biochemical activities in elevated temperature landfills.

Landfill leachate properties contain important information and can be a unique indicator for the chemical and biochemical activities in landfills. In the recent decade, more landfills are experiencing elevated temperature, causing an imbalance in the decomposition of solid waste and affecting the properties of the landfill leachate. This study analyzes the properties of leachate from two landfills that were experiencing elevated temperature (ETLFs), samples were collected from both elevated temperature impacted and non-impacted areas in each landfill. The accumulation of volatile fatty acids (VFA) in leachates from elevated temperature impacted areas of both landfill sites revealed that methanogenesis was inhibited by the elevated temperature, which was further confirmed by the more acidic pH, higher H/C elemental ratio, and lower degree of aromaticity of the elevated temperature impacted leachates. Also, carbohydrates depletion indicated possible enhancement of hydrolysis and acidogenesis by elevated temperature, which was supported by compositional comparison of isolated acidic species by negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) at 21 T derived from both elevated temperature impacted and non-impacted areas in the same landfill site. Furthermore, leachate organics fractionation showed that leachates not impacted by elevated temperature contain less hydrophilic fraction and more humic fraction than elevated temperature-impacted leachates for both ETLFs.

Highly efficient carbonation and dechlorination using flue gas micro-nano bubble for municipal solid waste incineration fly ash pretreatment and its applicability to sulfoaluminate cementitious materials.

Cement production is a primary source of global carbon emissions. As a hazardous waste, municipal solid waste incineration fly ash (MSWI-FA) can be pretreated as a cementitious and effective carbon capture material. This study proposes an efficient carbonation dechlorination pretreatment and resource recovery strategy using flue gas micro-nano bubble (MNB) to wash MSWI-FA. The results showed that the flue gas MNB water washing reaction solution inhibited CaCO3 boundary layer blocking and adsorption on NaCl and KCl leaching. Under low water-to-solid ratio and CO2 concentration conditions, two-step washing reduced the MSWI-FA chlorine content to <1%, improving the dechlorination effect by 19.72% compared to conventional carbonation. The flue gas MNB water accelerated the precipitation of Ca2+ and Ca(ClO)2 in the form of calcite. The higher the CO2 concentration in the flue gas MNB, the better the fragmentation and purification of the MSWI-FA shell, leading to improved dechlorination and CO2 fixation. Under optimized conditions, the mean particle size of MSWI-FA decreased by 47.82%, and the CO2 fixation rate reached 73.80%, with a 58.35% increase in the washing carbonation rate. MSWI-FA pretreated by flue gas MNB washing was used as both the raw material and supplementary cementitious material for sulfoaluminate cementitious (SAC) material, exhibiting excellent compressive strength and heavy metal stabilization. The maximum compressive strength of the MSWI-FA-based SAC material cured for 28 d reached 130 MPa. Cr leaching was inhibited with increased hydration time, and the leaching concentration was far below the standard limit.