Synthesis and antimicrobial activity testing of quaternary ammonium silane compounds.

With increasing health awareness of the pathogenic effects of disease-causing microorganisms, interest in and use (of medical textiles, disinfectants in medical devices, etc.) of antimicrobial substances have increased in various applications, such as medical textiles and disinfectants (alcohol-based and nonalcoholic), in medical devices There are several concerns with alcohol-based disinfectants, such as surface deformation of medical devices due to high alcohol content and damage to skin tissue caused by lipid and protein denaturation of cell membranes. Quaternary ammonium compounds (quats) were preferred because they have the potential to prepare water-based disinfectants. In this study, novel (3-chloropropyl)triethoxysilane (CPTMO) and (3-chloropropyl)triethoxysilane (CPTEO) based quaternary ammonium silane compounds (silane-quats) were developed using quats with carbon chain lengths of C12, C14, C16 and C18. Titration (ASTM D2074) was used to calculate the yield of the synthesis and the structures of the products were characterised by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (13C NMR, 1H NMR) and gas chromatography-mass spectrometry (GC-MS).The in vitro antimicrobial activity of the synthesized samples was evaluated against Gram-positive (Staphylococcus aureus (S. aureus), Enterococcus hirae (E. hirae)) and Gram-negative (Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa)) bacteria and fungi (Candida albicans (C. albicans), Aspergillus brasiliensis (A. brasiliensis)) using the minimum inhibitory concentration (MIC) test. According to MIC tests, the silane-quats with the highest antimicrobial effects were dimethylhexadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (SQ3), which had an MIC of < 16 µg/ml (ppm) against E. coli, S. aureus, E. hirae, C. albicans, and A. brasiliensis and 32 µg/ml against P. aeruginosa. The MIC test results also showed antimicrobial activity at least 2 times greater than that of the commercially available disinfectant benzalkonium chloride (BAC). Findings suggest that SQ3 (C16) holds promise as an effective medical disinfectant, presenting a novel approach to combating microbial infections in healthcare settings.

A Novel Coated Suture Displays Antimicrobial Activity Without Compromising Structural Properties.

BACKGROUND: Treated or coated sutures promise to prevent contamination of wounds. PURPOSE: The purpose of the study was to coat surgical sutures with a new quaternary ammonium silane (QAS) antimicrobial compound at two different application temperatures and then to evaluate the resulting structural, physical, mechanical, and biological properties. STUDY DESIGN, SETTING, SAMPLE: In vitro and in vivo studies were conducted using male albino Wistar rats approved by the Joint Ethical Committee of IMU and Postgraduate Medical Institute, Lahore. Only suture samples, coated uniformly with verified presence of the compound and of adequate length were used. Samples which were not coated uniformly and with inadequate length or damaged were excluded. PREDICTOR VARIABLE: Predictor variables were sutures with and without QAS coatings and different temperatures. Sutures were coated with QAS at 0.5 and 1.0% wt/vol using the dip coating technique and sutures with and without QAS coating were tested at 25 and 40 °C temperatures. MAIN OUTCOME VARIABLE(S): Outcome variables of structural and physico-mechanical properties of QAS-coated and non-coated sutures were measured using Fourier transform infrared spectroscopy (for structural changes), confocal laser and scanning electron (for diameter changes), and tensile strength/modulus (for mechanical testing). Biologic outcome variables were tested (bacterial viability); macrophage cultures from Wistar rats were tested (M1/M2 polarization detecting IL-6 and IL-10). Macrophage cells were analyzed with CD80+ (M1) and CD163+ (M2). Chemotaxis index was calculated as a ratio of quantitative fluorescence of cells. COVARIATES: Not applicable. ANALYSES: Ordinal data among groups were compared using the Wilcoxon Mann-Whitney U test along with the comparison of histological analysis using the Wilcoxon Sign-rank test (P < .05). RESULTS: Fourier transform infrared spectroscopy peak at 1490 cm-1 confirmed the presence of QAS on suture's surfaces with a significant increase (P < .05) in diameter (0.99 ± 0.5-mm) and weight (0.77 ± 0.02-mg) observed for 1% QAS groups treated at 40 °C. Non-coated samples heated at 25 °C had significantly (P < .05) less diameters (0.22 ± 0.03-mm) and weights (0.26 ± 0.06-mg). Highest tensile strength/modulus was observed for 0.5% QAS-coated samples which also had significantly higher antibacterial characteristics than other sutures (P < .05). QAS-coated sutures significantly increased M1 and M2 markers. CONCLUSION AND RELEVANCE: QAS coating conferred antibacterial action properties without compromising the physical and mechanical properties of the suture.

Superhydrophobic coatings reduce human bacterial foodborne pathogen attachment to woods used in fresh produce harvest and postharvest packing.

Wood is reportedly more difficult to maintain in hygienic condition versus other food contact materials, yet its use in produce packing and retail warrants efforts to reduce the risk of microbial pathogen contamination and attachment. This study characterized antifouling capabilities of fluorinated silanes applied to wood used in fresh edible produce handling to render the wood superhydrophobic and less supportive of bacterial pathogen attachment. Pine and oak cubic coupon surfaces were treated with 1% (w/w) silane or left untreated. Treated and untreated coupons were inoculated with Salmonella enterica or Listeria monocytogenes and held to facilitate pathogen attachment for 1, 4, or 8 h. Silane treatment of wood produced significant reductions in the proportions of strongly attaching cells for both pathogens versus loosely attaching cells (P < 0.01). Salmonella attachment demonstrated a dependency on wood treatment; silane-treated wood supported a lower fraction of strongly adhering cells (1.87 ± 1.24 log CFU/cm2) versus untreated wood (3.72 ± 0.67 log CFU/cm2). L. monocytogenes demonstrated significant declines in strongly attaching cells during extended exposure to silane-treated wood, from 7.59 ± 0.14 to 5.27 ± 0.68 log CFU/cm2 over 8 h post-inoculation. Microscopic analysis demonstrated silane treatment increased the surface roughness of both woods, leading to superhydrophobic conditions on wood surfaces, consequently decreasing strong attachment of pathogenic bacteria.

Development of an antimicrobial, 3D printable denture base material with K18 quaternary ammonium silane-functionalized methyl methacrylate and filler.

STATEMENT OF PROBLEM: Denture base materials are highly susceptible to microbial colonization, which can lead to denture stomatitis. In addition, patients who sleep with their dentures have an increased chance of contracting pneumonia. Commercially available antimicrobial denture base materials to prevent or combat microbial colonization are lacking. PURPOSE: The purpose of this in vitro study was to determine the effects of K18 quaternary ammonium methacryloxy silane-functionalized filler (K18-Filler) and methyl methacrylate (K18-MMA) on the polymerization of 3D printed denture base material and its esthetic, mechanical, and antimicrobial properties. MATERIAL AND METHODS: K18-Filler (0%, 10%, 20% w/w) and K18-MMA (0%, 5%, 12.5% w/w) were added to a 3D printable denture base resin (Denture Base Resin, Original Pink; Formlabs Inc) and 3D printed. Specimens were tested by using the Rockwell15T hardness, near infrared FTIR monomer-to-polymer degree of conversion (DoC), transparency parameter (TP), color shift, and 3-point bend and by counting colony forming units against Streptococcus aureus, Streptococcus sanguinis and Candida albicans tests. Data were analyzed using analysis of variance with the Tukey-Kramer HSD post hoc test. RESULTS: Control resins had significantly higher Rockwell15T hardness than most of the K18 groups (P<.05) but had comparable DoC with all K18 groups except one, showing that all groups were well polymerized. Controls had significantly higher TP than most K18 groups, but most K18 groups had ΔE<3.3, so the color shift was not noticeable. However, the 12.5% K18-MMA with 10% and 20% K18-Filler groups, which were also the groups used to test for antimicrobial activity, had ΔE>8. All K18 groups had comparable or greater moduli than the controls, but the controls had significantly higher ultimate transverse strengths than most K18 groups (P<.05). All 12.5% K18-MMA with K18-Filler groups had significant antimicrobial activity against S. aureus, S. sanguinis, and C. albicans. CONCLUSIONS: 12.5% K18-MMA and K18-Filler produced 3D printable denture materials with comparable polymerization properties and significant antimicrobial properties against S. mutans, S. sanguinis, and C. albicans. High K18-MMA and K18-Filler concentrations caused significant color shifts and reductions in ultimate strengths.

A Lysosome-Targeting Self-Condensation Prodrug-Nanoplatform System for Addressing Drug Resistance of Cancer.

Lysosome-targeting self-assembling prodrugs had emerged as an attractive approach to overcome the acquisition of resistance to chemotherapeutics by inhibiting lysosomal sequestration. Taking advantage of lysosomal acidification induced intracellular hydrolytic condensation, we developed a lysosomal-targeting self-condensation prodrug-nanoplatform (LTSPN) system for overcoming lysosome-mediated drug resistance. Briefly, the designed hydroxycamptothecine (HCPT)-silane conjugates self-assembled into silane-based nanoparticles, which were taken up into lysosomes by tumor cells. Subsequently, the integrity of the lysosomal membrane was destructed because of the acid-triggered release of alcohol, wherein the nanoparticles self-condensed into silicon particles outside the lysosome through intracellular hydrolytic condensation. Significantly, the LTSPN system reduced the half-maximal inhibitory concentration (IC50) of HCPT by approximately 4 times. Furthermore, the LTSPN system realized improved control of large established tumors and reduced regrowth of residual tumors in several drug-resistant tumor models. Our findings suggested that target destructing the integrity of the lysosomal membrane may improve the therapeutic effects of chemotherapeutics, providing a potent treatment strategy for malignancies.

The Antibacterial Effect of PEGylated Carbosilane Dendrimers on P. aeruginosa Alone and in Combination with Phage-Derived Endolysin.

The search for new microbicide compounds is of an urgent need, especially against difficult-to-eradicate biofilm-forming bacteria. One attractive option is the application of cationic multivalent dendrimers as antibacterials and also as carriers of active molecules. These compounds require an adequate hydrophilic/hydrophobic structural balance to maximize the effect. Herein, we evaluated the antimicrobial activity of cationic carbosilane (CBS) dendrimers unmodified or modified with polyethylene glycol (PEG) units, against planktonic and biofilm-forming P. aeruginosa culture. Our study revealed that the presence of PEG destabilized the hydrophilic/hydrophobic balance but reduced the antibacterial activity measured by microbiological cultivation methods, laser interferometry and fluorescence microscopy. On the other hand, the activity can be improved by the combination of the CBS dendrimers with endolysin, a bacteriophage-encoded peptidoglycan hydrolase. This enzyme applied in the absence of the cationic CBS dendrimers is ineffective against Gram-negative bacteria because of the protective outer membrane shield. However, the endolysin-CBS dendrimer mixture enables the penetration through the membrane and then deterioration of the peptidoglycan layer, providing a synergic antimicrobial effect.

Nanotechnology against human cytomegalovirus in vitro: polyanionic carbosilane dendrimers as antiviral agents.

BACKGROUND: Human cytomegalovirus (HCMV) is a worldwide infection, causing different troublesome in immunosupressed patients and very related to Human Immunodeficiency Virus 1 (HIV-1) infection, mainly in developing countries, with a co-infection rate of 80% in Africa. The high cost of present treatments and the lack of routinely tests in these countries urge the necessity to develop new molecules or strategies against HCMV. The new treatments should be low-cost and capable of avoiding the emerging problem of resistant virus. Nanoparticles play an important role in several viral infections. Our main focus is to study the potential activity of polyanionic carbosilane dendrimers (PDC), which are hyperbranched molecules with several sulfonate or sulfate groups in their periphery, against different viruses. RESULTS: We studied the activity of G1-S4, G2-S16 and G2-S24P PDCs in MRC-5 cell line against HCMV infection by several plaque reduction assays. Our results show that dendrimers present good biocompatibility at the concentrations tested (1-50 µM) for 6 days in cell culture. Interestingly, both G2-S16 and G2-S24P showed a remarked inhibition at 10 µM against HCMV infection. Results on attachment and virucidal assays indicated that the inhibition was not directed to the virus or the virus-cell attachment. However, results of time of addition, showed a longer lasting activity of these dendrimers in comparison to ganciclovir, and the combination of G2-S16 or G2-S24P with ganciclovir increases the HCMV inhibition around 90 %. CONCLUSIONS: Nanotechnology, in particular polyanionic carbosilane dendrimers, have proved their potential application against HCMV, being capable of inhibiting the infection by themselves or enhancing the activity of ganciclovir, the actual treatment. These compounds represent a low-cost approach to fight HCMV infections.

Interaction of Cationic Carbosilane Dendrimers and Their siRNA Complexes with MCF-7 Cells.

The application of siRNA in gene therapy is mainly limited because of the problems with its transport into cells. Utilization of cationic dendrimers as siRNA carriers seems to be a promising solution in overcoming these issues, due to their positive charge and ability to penetrate cell membranes. The following two types of carbosilane dendrimers were examined: CBD-1 and CBD-2. Dendrimers were complexed with pro-apoptotic siRNA (Mcl-1 and Bcl-2) and the complexes were characterized by measuring their zeta potential, circular dichroism and fluorescence of ethidium bromide associated with dendrimers. CBD-2/siRNA complexes were also examined by agarose gel electrophoresis. Both dendrimers form complexes with siRNA. Moreover, the cellular uptake and influence on the cell viability of the dendrimers and dendriplexes were evaluated using microscopic methods and XTT assay on MCF-7 cells. Microscopy showed that both dendrimers can transport siRNA into cells; however, a cytotoxicity assay showed differences in the toxicity of these dendrimers.

G2-S16 Polyanionic Carbosilane Dendrimer Can Reduce HIV-1 Reservoir Formation by Inhibiting Macrophage Cell to Cell Transmission.

Human immunodeficiency virus (HIV-1) is still a major problem, not only in developing countries but is also re-emerging in several developed countries, thus the development of new compounds able to inhibit the virus, either for prophylaxis or treatment, is still needed. Nanotechnology has provided the science community with several new tools for biomedical applications. G2-S16 is a polyanionic carbosilane dendrimer capable of inhibiting HIV-1 in vitro and in vivo by interacting directly with viral particles. One of the main barriers for HIV-1 eradication is the reservoirs created in primoinfection. These reservoirs, mainly in T cells, are untargetable by actual drugs or immune system. Thus, one approach is inhibiting HIV-1 from reaching these reservoir cells. In this context, macrophages play a main role as they can deliver viral particles to T cells establishing reservoirs. We showed that G2-S16 dendrimer is capable of inhibiting the infection from infected macrophages to healthy T CD4/CD8 lymphocytes by eliminating HIV-1 infectivity inside macrophages, so they are not able to carry infectious particles to other body locations, thus preventing the reservoirs from forming.

Correlative assays of barnacle cyprid behaviour for the laboratory evaluation of antifouling coatings: a study of surface energy components.

Laboratory evaluation of antifouling coatings is underpinned by settlement studies with specific fouling organisms. Established methods provide insight into the likelihood of failure of a particular coating system, but can neglect the process of surface selection that often precedes attachment. The present approach for quantifying the exploratory behaviour of barnacle cypris larvae suggested that inspection behaviour can be a rapid and predictive proxy for settlement. Two series of xerogels with comparable total surface energy, but different dispersive and polar components, were evaluated. Settlement assays with three-day-old cyprids of Balanus improvisus demonstrated that while attachment was not linked directly to dispersive free energy, the composition of the xerogel was nevertheless significant. Behavioural analysis provided insight into the mechanism of surface rejection. In the case of a 50:50 PH/TEOS (phenyltriethoxysilane-based) xerogel vs a 50:50 TFP/TEOS (3,3,3-trifluoropropyltrimethoxysilane-based) xerogel, wide-searching behaviour was absent on the former.

Osteoblast adhesion and response mediated by terminal -SH group charge surface of SiOxCy nanowires.

Robust cell adhesion is known to be necessary to promote cell colonization of biomaterials and differentiation of progenitors. In this paper, we propose the functionalization of Silicon Oxycarbide (SiOxCy) nanowires (NWs) with 3-mercaptopropyltrimethoxysilane (MPTMS), a molecule containing a terminal -SH group. The aim of this functionalization was to develop a surface capable to adsorb proteins and promote cell adhesion, proliferation and a better deposition of extracellular matrix. This functionalization can be used to anchor other structures such as nanoparticles, proteins or aptamers. It was observed that surface functionalization markedly affected the pattern of protein adsorption, as well as the in vitro proliferation of murine osteoblastic cells MC3T3-E1, which was increased on functionalized nanowires (MPTMS-NWs) compared to bare NWs (control) (p < 0.0001) after 48 h. The cells showed a better adhesion on MPTMS-NWs than on bare NWs, as confirmed by immunofluorescence studies on the cytoskeleton, which showed a more homogeneous vinculin distribution. Gene expression analysis showed higher expression levels for alkaline phosphatase and collagen I, putative markers of the osteoblast initial differentiation stage. These results suggest that functionalization of SiOxCy nanowires with MPTMS enhances cell growth and the expression of an osteoblastic phenotype, providing a promising strategy to improve the biocompatibility of SiOxCy nanowires for biomedical applications.

Assessment of Antifouling Potential of Novel Transparent Sol Gel Coatings for Application in the Marine Environment.

In recent years, there has become a growing need for the development of antifouling technology for application in the marine environment. The accumulation of large quantities of biomass on these surfaces cause substantial economic burdens within the marine industry, or adversely impact the performance of sensor technologies. Here, we present a study of transparent coatings with potential for applications on sensors or devices with optical windows. The focus of the study is on the abundance and diversity of biofouling organisms that accumulate on glass panels coated with novel transparent or opaque organically modified silicate (ORMOSIL) coatings. The diatom assessment was used to determine the effectiveness of the coatings against biofouling. Test panels were deployed in a marine environment in Galway Bay for durations of nine and thirteen months to examine differences in biofilm formation in both microfouling and macrofouling conditions. The most effective coating is one which consists of precursor, tetraethyl orthosilicate (HC006) that has a water contact angle > 100, without significant roughness (43.52 nm). However, improved roughness and wettability of a second coating, diethoxydimethylsilane (DMDEOS), showed real promise in relation to macrofouling reduction.

Anionic Carbosilane Dendrimers Destabilize the GP120-CD4 Complex Blocking HIV-1 Entry and Cell to Cell Fusion.

Cell-to-cell transmission is the most effective pathway for the spread of human immunodeficiency virus (HIV-1). Infected cells expose virus-encoded fusion proteins on their surface as a consequence of HIV-1 replicative cycle that interacts with noninfected cells through CD4 receptor and CXCR4 coreceptor leading to the formation of giant multinucleated cells known as syncytia. Our group previously described the potent activity of dendrimers against CCR5-tropic viruses. Nevertheless, the study of G1-S4, G2-S16, and G3-S16 dendrimers in the context of X4-HIV-1 tropic cell-cell fusion referred to syncytium formation remains still unknown. These dendrimers showed a suitable biocompatibility in all cell lines studied and our results demonstrated that anionic carbosilane dendrimers G1-S4, G2-S16, and G3-S16 significantly inhibit the X4-HIV-1 infection, as well as syncytia formation, in a dose dependent manner. We also demonstrated that G2-S16 and G1-S4 significantly reduced syncytia formation in HIV-1 Env-mediated cell-to-cell fusion model. Molecular modeling and in silico models showed that G2-S16 dendrimer interfered with gp120-CD4 complex and demonstrated its potential use for a treatment.

Asymmetric Synthesis of Silanediol Inhibitors for the Serine Protease Coagulation Cascade Enzyme FXIa.

Silanediol peptidomimetics have been prepared, designed to inhibit the serine protease enzyme Factor XIa (FXIa) for treatment of thrombosis without complete interruption of normal hemostasis. These Arg-[Si]-Ala analogues of the FXIa substrate (FIX) are the first silanediol dipeptide analogues to carry a basic guanidine group. Control of stereochemistry was accomplished using catalytic asymmetric hydrosilylation and addition of a silyllithium intermediate to the Davis-Ellman sulfinimine.

A Novel, Nonpeptidic, Orally Active Bivalent Inhibitor of Human ß-Tryptase.

ß-Tryptase is released from mast cells upon degranulation in response to allergic and inflammatory stimuli. Human tryptase is a homotetrameric serine protease with 4 identical active sites directed toward a central pore. These active sites present an optimized scenario for the rational design of bivalent inhibitors, which bridge 2 adjacent active sites. Using (3-[1-acylpiperidin-4-yl]phenyl)methanamine as the pharmacophoric core and a disiloxane linker to span 2 active sites we have successfully produced a novel bivalent tryptase inhibitor, compound 1a, with a comparable profile to previously described inhibitors. Pharmacological properties of compound 1a were studied in a range of in vitro enzymic and cellular screening assays, and in vivo xenograft models. This non-peptide inhibitor of tryptase demonstrated superior activity (IC50 at 100 pmol/L tryptase = 1.82 nmol/L) compared to monomeric modes of inhibition. X-ray crystallography validated the dimeric mechanism of inhibition, and 1a demonstrated good oral bioavailability and efficacy in HMC-1 xenograft models. Furthermore, compound 1a demonstrated extremely slow off rates and high selectivity against-related proteases. This highly potent, orally bioavailable and selective inhibitor of human tryptase will be an invaluable tool in future studies to explore the therapeutic potential of attenuating the activity of this elusive target.

Agrochemicals: Effect on genetic resistance in yeasts colonizing winter wheat kernels.

Crop protection agents are widely used in modern agriculture and exert direct effects on non-target microorganisms such as yeasts. Yeasts abundantly colonize wheat grain and affect its chemical composition. They can also limit pathogen growth. This study evaluated the sensitivity of yeast communities colonizing winter wheat kernels to benzimidazole, strobilurin, triazole and morpholine fungicides, trinexapac-ethyl, a commercial mixture of o-nitrophenol+p-nitrophenol+5-nitroguaiacol, and chitosan applied during the growing season of winter wheat and in vitro in a diffusion test. A molecular identification analysis of yeasts isolated from winter wheat kernels was performed, and nucleotide polymorphisms in the CYTb gene (G143A) conferring resistance to strobilurin fungicides in yeast cells were identified. The size of yeast communities increased during grain storage, and the total counts of endophytic yeasts were significantly (85%) reduced following intensive fungicide treatment (fenpropimorph, a commercial mixture of pyraclostrobin, epoxiconazole and thiophanate-methyl). This study demonstrated that agrochemical residues in wheat grain can drive selection of yeast communities for reduced sensitivity to xenobiotics. A mutation in the CYTb gene (G143A) was observed in all analyzed isolates of the following azoxystrobin-resistant species: Aureobasidium pullulans, Debaryomyces hansenii, Candida albicans and C. sake. Agrochemicals tested in vitro were divided into four classes of toxicity to yeasts: (1) tebuconazole and a commercial mixture of flusilazole and carbendazim - most toxic to yeasts; (2) fenpropimorph and a commercial mixture of pyraclostrobin and epoxyconazole; (3) propiconazole, chitosan, thiophanate-methyl and a commercial mixture of o-nitrophenol, p-nitrophenol and 5-nitroguaiacol; (4) trinexapac-ethyl and azoxystrobin - least toxic to yeasts. It was found that agrochemicals can have an adverse effect on yeast abundance and the composition of yeast communities, mostly due to differences in fungicide resistance between yeast species, including the clinically significant C. albicans.

Hormetic Effects of Flusilazole Preconditioning on Mycelial Growth and Virulence of Sclerotinia sclerotiorum.

Hormetic effects of fungicides are highly relevant to fungicide applications and management of plant-pathogenic fungi. Preconditioning (i.e., early exposure to relatively low doses of a toxicant) is a special form of hormesis, and fungicide preconditioning of phytopathogenic fungi is inevitable in the field. The present study showed that spraying the demethylation inhibitor (DMI) fungicide flusilazole at 0.1 µg/ml had stimulatory effects on the virulence of Sclerotinia sclerotiorum inoculated at 1 and 24 h after spraying. Flusilazole sprayed at 10 µg/ml showed inhibitory effects on the virulence of S. sclerotiorum inoculated during the first 3 days after spraying. Inoculations on the 5th, 7th, and 10th day after spraying did not show any significant inhibitory or stimulatory effects on the virulence. After growing for 2 days on potato dextrose agar (PDA) amended with flusilazole at a dose range from 0.0005 to 0.25 µg/ml as preconditioning treatments, mycelia were transferred onto PDA without fungicide and subsequent mycelial growth was slower than the nonpreconditioned control. However, after the preconditioned colonies were transferred onto PDA supplemented with flusilazole at 0.2 µg/ml, percent stimulations of mycelia growth compared with the control had a parabolic shape across the preconditioning flusilazole concentration range. Similarly, the mycelial growth of the preconditioned mycelial plugs on PDA amended with other DMI fungicides (prochloraz or tebuconazole) also showed a typical hormetic response, whereas mycelial growth on PDA amended with carbendazim or dimethachlone was inhibited in a dose-dependent manner. Preconditioning S. sclerotiorum with flusilazole on rapeseed plants elicited virulence stimulations in a dose-dependent manner similar to those on mycelial growth on PDA. After disease lesions developed on rapeseed leaves sprayed with flusilazole as the preconditioning treatment were inoculated onto rapeseed plants, virulence was inhibited on leaves without fungicide or sprayed with carbendazim or dimethachlone compared with the nonpreconditioned control, whereas virulence was stimulated on leaves sprayed with flusilazole, prochloraz, or tebuconazole, and the maximum percent stimulation was 10.2%. These results will advance our understanding of hormetic effects of fungicides and of preconditioning hormesis in particular.

Stimulatory Effects of Flusilazole on Virulence of Sclerotinia sclerotiorum.

Flusilazole, a member of the demethylation inhibitor fungicides, is highly efficacious for control of Sclerotinia sclerotiorum. To achieve judicious applications of flusilazole, its hormetic effects on virulence of S. sclerotiorum were investigated. Flusilazole sprayed at concentrations from 0.02 to 0.5 µg/ml caused statistically significant (P < 0.05) stimulatory effects on virulence of S. sclerotiorum to potted rapeseed plants, and the maximum stimulation magnitudes were 11.0 and 10.7% for isolates GS-7 and HN-24, respectively. Studies on the time course of the infection process showed that a stimulatory effect on virulence could be discerned at 18 h postinoculation, indicating a direct stimulation mechanism rather than an overcompensation for initial inhibitions. In order to determine whether the stimulations were caused mainly by effects of flusilazole on S. sclerotiorum or on rapeseed plants, mycelia grown on flusilazole-amended potato dextrose agar (PDA) media were inoculated on leaves of rapeseed plants without spraying the fungicide. Mycelium radial growth on PDA supplemented with flusilazole at concentrations from 0.005 to 0.16 µg/ml was inhibited by 10.11 to 48.7% for isolate GS-7 and by 4.1 to 24.9% for isolate HN-24. Observations with a scanning electron microscope showed that flusilazole in PDA at 0.04 and 0.08 µg/ml caused slightly deformed mycelia and twisted mycelial tips. Nevertheless, after inoculating on leaves of potted rapeseed plants, virulence of the inhibited mycelia was statistically significantly (P < 0.05) greater than that of the nontreated control, and the maximum stimulation magnitudes were 16.2 and 19.8% for isolates GS-7 and HN-24, respectively. Studies on a physiological mechanism for virulence stimulations showed that tolerance to hydrogen peroxide did not increase significantly for mycelia grown on flusilazole-amended PDA, thus excluding the possibility of tolerance to reactive oxygen species as a potential mechanism for virulence stimulations.

Novel sila-amide derivatives of N-acetylcysteine protects platelets from oxidative stress-induced apoptosis.

Oxidative stress-induced platelet apoptosis is one among the many causes for the development and progression of many disorders like cardiovascular diseases, arthritis, Alzheimer's disease and many chronic inflammatory responses. Many studies have demonstrated the less optimal effect of N-acetyl cysteine (NAC) in oxidative stress-induced cellular damage. This could be due to its less lipophilicity which makes it difficult to enter the cellular membrane. Therefore in the present study, lipophilic sila-amide derivatives (6a and 6b) synthesized through the reaction of NAC with 3-Aminopropyltrimethylsilane and aminomethyltrimethylsilane were used to determine their protective property against oxidative stress-induced platelet apoptosis. At a concentration of 10 µM, compound 6a and 6b were able to significantly inhibit Rotenone/H2O2 induced platelet apoptotic markers like reactive oxygen species, intracellular calcium level, mitochondrial membrane potential, cytochrome c release from mitochondrial to the cytosol, caspase-9 and -3 activity and phosphatidylserine externalization. Therefore, the compounds can be extrapolated as therapeutic agents to protect platelets from oxidative stress-induced platelet apoptosis and its associated complications.

Polyanionic carbosilane dendrimers prevent hepatitis C virus infection in cell culture.

Hepatitis C virus (HCV) infection is a major biomedical problem worldwide. Although new direct antiviral agents (DAAs) have been developed for the treatment of chronic HCV infection, the potential emergence of resistant virus variants and the difficulties to implement their administration worldwide make the development of novel antiviral agents an urgent need. Moreover, no effective vaccine is available against HCV and transmission of the virus still occurs particularly when prophylactic measures are not taken. We used a cell-based system to screen a battery of polyanionic carbosilane dendrimers (PCDs) to identify compounds with antiviral activity against HCV and show that they inhibit effective virus adsorption of major HCV genotypes. Interestingly, one of the PCDs irreversibly destabilized infectious virions. This compound displays additive effect in combination with a clinically relevant DAA, sofosbuvir. Our results support further characterization of these molecules as nanotools for the control of hepatitis C virus spread.