Your browser doesn't support javascript.
loading
Implementation of an ionization chamber array for linear accelerator monthly dosimetry QA.
Taneja, Sameer; Barbee, David L.
Afiliación
  • Taneja S; Department of Radiation Oncology, New York University Langone Medical Center, New York, New York, USA.
  • Barbee DL; Department of Radiation Oncology, New York University Langone Medical Center, New York, New York, USA.
J Appl Clin Med Phys ; : e14433, 2024 Jun 23.
Article en En | MEDLINE | ID: mdl-38923344
ABSTRACT

PURPOSE:

The IC Profiler (ICP) manufactured by Sun Nuclear Corporation (SNC) is an ionization chamber (IC) array used for linear accelerator dosimetry measurements. Previous work characterized response of the ICP under various conditions, but there is limited work of its implementation into monthly QA measurement procedures. This work quantifies ICP accuracy and variables that affect accuracy for beam output measurements, and demonstrates feasibility of using the ICP for all recommended monthly dosimetry measurements.

METHODS:

A total of 1985 output measurements on six Varian TrueBeam and Edge linear accelerators were performed using three ICP with quad wedges (QWs) and were compared with conventional IC measurements. The accuracy of the ICP for beam output was characterized as the difference between the ICP and IC. Variables that affect ICP accuracy, including gain settings, calibrations, and template baselining as well as machine or energy-specific bias were investigated. Measurements of profile constancy, energy, dose rate constancy, wedge factors, and gating were performed.

RESULTS:

The initially observed mean output difference between the ICP and IC was 0.16% (0.61%). When gain settings were optimized, the output difference accuracy improved to -0.02% (0.38%). The output accuracy of the ICP was not dependent on array, dose, temperature and pressure calibrations, or template baselining. Statistically, ICP output accuracy was dependent on machine and beam energy, but clinically, all measurements fell within 0.5% of unity. ICP measurements of energy, dose rate constancy, and wedge factors matched passing results with conventional IC in water measurements. Gating and beam profile constancy measurements demonstrated good stability using the ICP. Finally, monthly dosimetry QA using ICP was completed in an average of 33 min compared to 66 min using the IC.

CONCLUSION:

This work demonstrated the feasibility and efficiency of using the ICP, with specific considerations, as a measurement device for dosimetric linear accelerator monthly QA.
Palabras clave

Texto completo: 1 Colección: 01-internacional Banco de datos: MEDLINE Idioma: En Revista: J Appl Clin Med Phys Asunto de la revista: BIOFISICA Año: 2024 Tipo del documento: Article País de afiliación: Estados Unidos

Texto completo: 1 Colección: 01-internacional Banco de datos: MEDLINE Idioma: En Revista: J Appl Clin Med Phys Asunto de la revista: BIOFISICA Año: 2024 Tipo del documento: Article País de afiliación: Estados Unidos