Optimised graphite/carbon black loading of recycled PLA for the production of low-cost conductive filament and its application to the detection of ß-estradiol in environmental samples.

The production, optimisation, physicochemical, and electroanalytical characterisation of a low-cost electrically conductive additive manufacturing filament made with recycled poly(lactic acid) (rPLA), castor oil, carbon black, and graphite (CB-G/PLA) is reported. Through optimising the carbon black and graphite loading, the best ratio for conductivity, low material cost, and printability was found to be 60% carbon black to 40% graphite. The maximum composition within the rPLA with 10 wt% castor oil was found to be an overall nanocarbon loading of 35 wt% which produced a price of less than £0.01 per electrode whilst still offering excellent low-temperature flexibility and reproducible printing. The additive manufactured electrodes produced from this filament offered excellent electrochemical performance, with a heterogeneous electron (charge) transfer rate constant, k0 calculated to be (2.6 ± 0.1) × 10-3 cm s-1 compared to (0.46 ± 0.03) × 10-3 cm s-1 for the commercial PLA benchmark. The additive manufactured electrodes were applied to the determination of ß-estradiol, achieving a sensitivity of 400 nA µM-1, a limit of quantification of 70 nM, and a limit of detection of 21 nM, which compared excellently to other reports in the literature. The system was then applied to the detection of ß-estradiol within four real water samples, including tap, bottled, river, and lake water, where recoveries between 95 and 109% were obtained. Due to the ability to create high-performance filament at a low material cost (£0.06 per gram) and through the use of more sustainable materials such as recycled polymers, bio-based plasticisers, and naturally occurring graphite, additive manufacturing will have a permanent place within the electroanalysis arsenal in the future.

Spherulitic Lead Calcium Apatite Minerals in Lead Water Pipes Exposed to Phosphate-Dosed Tap Water.

Phosphate dosing is the principle strategy used in the United Kingdom to reduce the concentration of lead in tap waters supplied by lead water pipes. The mechanisms of phosphate-mediated lead control are not fully understood, but solid solutions of lead calcium apatite are thought to play an important role. This study investigated the microstructure of a lead pipe, supplied with high-alkalinity tap water, in which the lead calcium apatite crystals were spherulitic having rounded and dumb-bell-shaped morphologies. XRD, Fourier transform infrared spectroscopy, optical microscopy, Raman spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy showed that the lead pipe had a well-established inner layer of litharge; a middle layer containing lead calcium apatite spherulites, plumbonacrite, and some hydrocerussite; and an outer layer containing iron, lead, phosphorus, calcium, silicon, and aluminum. It was found that spherulitic lead calcium apatite could be grown in the laboratory by adding hydrocerussite to synthetic soft and hard water-containing phosphate, chloride, and citrate ions at pH 5.5 but not when the citrate was absent. This suggests that dissolved organic molecules might play a role in spherulite formation on lead water pipes. These molecules might inhibit the formation of lead calcium apatite, reducing the effectiveness of phosphate dosing in lead water pipes.

Sustainable Electrosynthesis of Cyclohexanone Oxime through Nitrate Reduction on a Zn-Cu Alloy Catalyst.

Cyclohexanone oxime is an important precursor for Nylon-6 and is typically synthesized via the nucleophilic addition-elimination of hydroxylamine with cyclohexanone. Current technologies for hydroxylamine production are, however, not environment-friendly due to the requirement of harsh reaction conditions. Here, we report an electrochemical method for the one-pot synthesis of cyclohexanone oxime under ambient conditions with aqueous nitrate as the nitrogen source. A series of Zn-Cu alloy catalysts are developed to drive the electrochemical reduction of nitrate, where the hydroxylamine intermediate formed in the electroreduction process can undergo a chemical reaction with the cyclohexanone present in the electrolyte to produce the corresponding oxime. The best performance is achieved on a Zn93Cu7 electrocatalyst with a 97% yield and a 27% Faradaic efficiency for cyclohexanone oxime at 100 mA/cm2. By analyzing the catalytic activities/selectivities of the different Zn-Cu alloys and conducting in-depth mechanistic studies via in situ Raman spectroscopy and theoretical calculations, we demonstrate that the adsorption of nitrogen species plays a central role in catalytic performance. Overall, this work provides an attractive strategy to build the C-N bond in oxime and drive organic synthesis through electrochemical nitrate reduction, while highlighting the importance of controlling surface adsorption for product selectivity in electrosynthesis.

Describing whisker morphology of the Carnivora.

One of the largest ecological transitions in carnivoran evolution was the shift from terrestrial to aquatic lifestyles, which has driven morphological diversity in skulls and other skeletal structures. In this paper, we investigate the association between those lifestyles and whisker morphology. However, comparing whisker morphology over a range of species is challenging since the number of whiskers and their positions on the mystacial pads vary between species. Also, each whisker will be at a different stage of growth and may have incurred damage due to wear and tear. Identifying a way to easily capture whisker morphology in a small number of whisker samples would be beneficial. Here, we describe individual and species variation in whisker morphology from two-dimensional scans in red fox, European otter and grey seal. A comparison of long, caudal whiskers shows inter-species differences most clearly. We go on to describe global whisker shape in 24 species of carnivorans, using linear approximations of curvature and taper, as well as traditional morphometric methods. We also qualitatively examine surface texture, or the presence of scales, using scanning electron micrographs. We show that gross whisker shape is highly conserved, with whisker curvature and taper obeying simple linear relationships with length. However, measures of whisker base radius, length, and maybe even curvature, can vary between species and substrate preferences. Specifically, the aquatic species in our sample have thicker, shorter whiskers that are smoother, with less scales present than those of terrestrial species. We suggest that these thicker whiskers may be stiffer and able to maintain their shape and position during underwater sensing, but being stiffer may also increase wear.

The physicochemical investigation of hydrothermally reduced textile waste and application within carbon-based electrodes.

Textile waste is on the rise due to the expanding global population and the fast fashion market. Large volumes of textile waste are increasing the need for new methods for recycling mixed fabric materials. This paper employs a hydrothermal conversion route for a polyester/cotton mix in phosphoric acid to generate carbon materials (hydrochars) for electrochemical applications. A combination of characterization techniques revealed the reaction products were largely comprised of two major components. The first is a granular material with a surface C : O ratio of 2 : 1 interspersed with phosphorous and titanium proved using energy dispersive X-ray spectroscopy, and the other is a crystalline material with a surface C : O ratio of 3 : 2 containing no phosphorous or titanium. The latter material was found via X-ray diffraction and differential scanning calorimetry to be terephthalic acid. Electrochemical experiments conducted using the hydrochar as a carbon paste electrode demonstrates an increase in current response compared to carbon reference materials. The improved current responses, intrinsically related to the surface area of the material, could be beneficial for electrochemical sensor applications, meaning that this route holds promise for the development of a cheap recycled carbon material, using straightforward methods and simple laboratory reagents.

Different psychological effects of cannabis use in adolescents at genetic high risk for schizophrenia and with attention deficit/hyperactivity disorder (ADHD).

BACKGROUND: Controversy exists regarding whether young people at risk for schizophrenia are at increased risk of adverse mental effects of cannabis use. METHODS: We examined cannabis use and mental health functioning in three groups of young people aged 14-21; 36 non-psychotic siblings of adolescents with schizophrenia (genetic high risk group), 25 adolescents with attention deficit hyperactivity disorder (ADHD) and 72 healthy controls. The groups were sub-divided into 'users' and 'non-users' of cannabis based on how often they had used cannabis previously. Mental health functioning was quantified by creating a composite index derived from scores on the Schizotypal Personality Questionnaire (SPQ), Strengths and Difficulties Questionnaire (SDQ) and Global Assessment of Function (GAF). RESULTS: A significant positive association between cannabis use and mental health disturbance was confined to young people at genetic high risk for schizophrenia. To determine whether the relationship was specific to particular dimensions of mental health function, a second composite index was created based on scores from the SPQ Disorganisation and SDQ hyperactivity-inattention sub-scales. Again, there was a significant positive association between cannabis use and factor scores which was specific to the genetic high risk group. There was a trend for this association to be negative in the ADHD group (p=0.07). CONCLUSIONS: The findings support the view that young people at genetic high risk for schizophrenia are particularly vulnerable to mental health problems associated with cannabis use. Further research is needed to investigate the basis of relationships between cannabis and mental health in genetically vulnerable individuals.