Creating Efficient Red Thermally Activated Delayed Fluorescence Materials with Cyano-Substituted 11,12-Diphenyldipyrido[3,2-a:2',3'-c]phenazine Acceptors.

Red luminescent materials are essential components for full color display and white lightening based on organic light-emitting diode (OLED) technology, but the extension of emission color towards red or deep red region generally leads to decreased photoluminescence and electroluminescence efficiencies. Herein, we wish to report two new luminescent molecules (2CNDPBPPr-TPA and 4CNDPBPPr-TPA) consisting of cyano-substituted 11,12-diphenyldipyrido[3,2-a:2',3'-c]phenazine acceptors and triphenylamine donors. As the increase of cyano substituents, the emission wavelength is greatly red-shifted and the reverse intersystem crossing process is promoted, resulting in strong red delayed fluorescence. Meanwhile, due to the formation of intramolecular hydrogen bonds, the molecular structures become rigidified and planarized, which brings about large horizontal dipole ratios. As a result, 2CNDPBPPr-TPA and 4CNDPBPPr-TPA can perform as emitters efficiently in OLEDs, furnishing excellent external quantum efficiencies of 28.8 % at 616 nm and 20.2 % at 648 nm, which are significantly improved in comparison with that of the control molecule without cyano substituents. The findings in this work demonstrate that the introduction of cyano substituents to the acceptors of delayed fluorescence molecules could be a facile and effective approach to explore high-efficiency red or deep red delayed fluorescence materials.

Degradation of thermal stability and micromechanical properties of the C-S-H phase induced by ultra-confined water at elevated temperatures.

Water in the nanometer to micrometer-sized pores of calcium silicate hydrate (C-S-H) is essential for the binding process of cementitious materials. The quantity, location, and physical state of water in C-S-H pores under extreme conditions significantly influence the strength and durability of cementitious materials. The present study employed ReaxFF and molecular dynamics (MD) simulation to evaluate the effects of water ultra-confined in the nanopores on the structure, bonds, dynamics, and tensile mechanism of the C-S-H grains at elevated temperatures. The results indicate that the temperature elevation may interfere with the water molecule's hydrogen-bond network between the C-S-H grains, causing a notable nanometer-scale pore expansion. Simultaneously, the diffusion coefficient of water molecules confined in nanopores gradually increased, and their dynamic characteristics shifted from a glassy nature to free water. Additionally, high temperatures promoted hydrolysis reactions and the breakage of chemical bonds in the C-S-H framework, causing disintegration of the silicate skeleton and a decrease in the mechanical attributes of C-S-H. Moreover, the uniaxial tensile test at high temperatures revealed that the silicate chain groups in the C-S-H substrates underwent thermal curling. In contrast to interlayer-bound water, under the action of tension, water molecules in nanopores are viscous, forming water layers.

Enhancing Water Resistance and Mechanical Properties of Cemented Soil with Graphene Oxide.

Although cemented soil as a subgrade fill material can meet certain performance requirements, it is susceptible to capillary erosion caused by groundwater. In order to eliminate the hazards caused by capillary water rise and to summarize the relevant laws of water transport properties, graphene oxide (GO) was used to improve cemented soil. This paper conducted capillary water absorption tests, unconfined compressive strength (UCS) tests, softening coefficient tests, and scanning electron microscope (SEM) tests on cemented soil using various contents of GO. The results showed that the capillary water absorption capacity and capillary water absorption rate exhibited a decreasing and then increasing trend with increasing GO content, while the UCS demonstrated an increasing and then decreasing trend. The improvement effect is most obvious when the content is 0.09%. At this content, the capillary absorption and capillary water absorption rate were reduced by 25.8% and 33.9%, respectively, and the UCS at 7d, 14d, and 28d was increased by 70.32%, 57.94%, and 61.97%, respectively. SEM testing results demonstrated that GO reduces the apparent void ratio of cemented soil by stimulating cement hydration and promoting ion exchange, thereby optimizing the microstructure and improving water resistance and mechanical properties. This research serves as a foundation for further investigating water migration and the appropriate treatment of GO-modified cemented soil subgrade.

Promising interlayer sensitization strategy for the construction of high-performance blue hyperfluorescence OLEDs.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials are promising candidates for organic light-emitting diodes (OLEDs) with narrow electroluminescence (EL) spectra. Current researches focus on fabricating hyperfluorescence OLEDs to improve EL efficiencies of MR-TADF emitters by co-doping them with TADF sensitizers in a single host layer. However, in many cases, the polarity of the single host could be not suitable for both blue MR-TADF emitters and blue TADF sensitizers, resulting in broadened EL spectra in high-polar hosts or decreased EL efficiencies in low-polar hosts. Herein, we wish to report an efficient sensitization strategy for blue MR-TADF emitters by constructing an interlayer-sensitizing configuration, in which the blue TADF sensitizers and blue MR-TADF emitters are separated into two closely aligned host layers with high polarity and low polarity, respectively. Based on this strategy, efficient blue hyperfluorescence OLEDs are realized and verified by employing various TADF sensitizers and different MR-TADF emitters, furnishing outstanding external quantum efficiencies of up to 38.8% and narrow EL spectra. These results validate the feasibility and universality of this interlayer sensitization strategy, which provides an effective alternative to high-performance blue hyperfluorescence OLEDs.