Electromagnetic Shielding Materials in GHz Range.

The state-of-the art in the design and the manufacture methods of the different electromagnetic shielding materials has been reviewed. This topic has become a mainstream field of research because of the electromagnetic pollution generated by telecommunication technology development. The review is centred in absorbent materials and shows a general overview of how the absorption properties of such composites can be tailored through changes in geometry, composition, morphology, and the filler particles content. Although different types of materials are explained, the text is mainly focused on carbon materials such as graphene and carbon nanotubes. In this way, the importance of the dispersion of the conductive fillers in different polymer matrices is discussed. In addition, an extensive study on new complex architectures such as foam-based materials is presented. Finally, the combination of carbon fillers with other constituents such as metallic nanoparticles is mentioned. In all these studies, the efficiency of the composites as absorbent or reflective of electromagnetic radiation is discussed.

Magneto-Mechanical Surfaces Design.

Magneto-mechanically active surfaces (MMAS) represent a new family of nano/micro-structured surfaces in which motion is induced by an external magnetic field. Under the name of "artificial cilia", "biomimetic cilia", "magnetic actuated patterns", "nanopillars", etc., published works in this area continue their quick growth in number. Notwithstanding their potential application in microfluidic, chemical sensors, catalytic processes and microelectronics to increase device perfomances, there is still a lot to do in the development of these materials. Improvement and optimization of the performance of these structures are essential tasks in order to fulfil their complete development. Along this article, a critical review involving the main aspects in the design of the patterned nanocomposites will be presented.

Mechanism of Morphology Development in HDGEBA/PAMS Hybrid Thermosets: Monte Carlo Simulation and LSCM Study.

Reactive combinations of aliphatic epoxy resins and functional polysiloxanes form a class of hybrid thermosetting materials with properties that may come from both the organic and the inorganic phases. The two typically immiscible phases form a suspension whose morphology, composition, and thermal properties vary with curing time. The aim of this research was to elucidate the mechanism by which morphology changed with time and to simulate it through Metropolis-Monte Carlo. The selected system was hydrogenated epoxy (HDGEBA) and a synthetic polyaminosiloxane (PAMS). It was studied by DSC, FTnIR, gel point, viscometry, and in-situ laser scanning confocal microscopy. A mechanism for morphology generation was proposed and simulated, exploring a wide range of values of the "a priori" relevant variables. The essential features were captured by simulations with a reasonable agreement with experimental data. However, the complete process was more complex than the geometrical approach of the simulation. The main deviations that were found and qualitatively explained are: (i) the induction period on the rate of coalescence, and (ii) PAMS-rich domain average size increases faster than predictions.

Chitosan as a Tool for Sustainable Development: A Mini Review.

New developments require innovative ecofriendly materials defined by their biocompatibility, biodegradability, and versatility. For that reason, the scientific society is focused on biopolymers such as chitosan, which is the second most abundant in the world after cellulose. These new materials should show good properties in terms of sustainability, circularity, and energy consumption during industrial applications. The idea is to replace traditional raw materials with new ecofriendly materials which contribute to keeping a high production rate but also reducing its environmental impact and the costs. The chitosan shows interesting and unique properties, thus it can be used for different purposes which contributes to the design and development of sustainable novel materials. This helps in promoting sustainability through the use of chitosan and diverse materials based on it. For example, it is a good sustainable alternative for food packaging or it can be used for sustainable agriculture. The chitosan can also reduce the pollution of other industrial processes such as paper production. This mini review collects some of the most important advances for the sustainable use of chitosan for promoting circular economy. Hence, the present review focuses on different aspects of chitosan from its synthesis to multiple applications.

Concentration Effect over Thermoresponse Derived from Organometallic Compounds of Functionalized Poly(N-isopropylacrylamide-co-dopamine Methacrylamide).

The functionalization of smart polymers is opening a new perspective in catalysis, drug carriers and biosensors, due to the fact that they can modulate the response regarding conventional devices. This smart response could be affected by the presence of organometallic complexes in terms of interactions which could affect the physical chemical properties. In this sense, the thermoresponsive behavior of copolymers based on N-isopropylacrylamide (NIPAM) could be affected due to the presence of hydrophobic groups and concentration effect. In this work, the functionalization of a copolymer based on NIPAM and dopamine methacrylamide with different amounts of bis(cyclopentadienyl)titanium (IV) dichloride was carried out. The resulting materials were characterized, showing a clear idea about the mechanism of functionalization through FTIR spectroscopy. The thermoresponsive behavior was also studied for various polymeric solutions in water by UV-vis spectroscopy and calorimetry. The hydrophobic interactions promoted by the organometallic complex could affect the transition associated with the lower critical solution temperature (LCST), specifically, the segments composed by pure NIPAM. That fact would explain the reduction of the width of the LCST-transition, contrary to what could be expected. In addition, the hydrophobicity was tested by the contact angle and also DNA interactions.

High Ampacity Carbon Nanotube Materials.

Constant evolution of technology is leading to the improvement of electronical devices. Smaller, lighter, faster, are but a few of the properties that have been constantly improved, but these developments come hand in hand with negative downsides. In the case of miniaturization, this shortcoming is found in the inherent property of conducting materials-the limit of current density they can withstand before failure. This property, known as ampacity, is close to reaching its limits at the current scales of use, and the performances of some conductors such as gold or copper suffer severely from it. The need to find alternative conductors with higher ampacity is, therefore, an urgent need, but at the same time, one which requires simultaneous search for decreased density if it is to succeed in an ever-growing electronical world. The uses of these carbon nanotube-based materials, from airplane lightning strike protection systems to the microchip industry, will be evaluated, failure mechanisms at maximum current densities explained, limitations and difficulties in ampacity measurements with different size ranges evaluated, and future lines of research suggested. This review will therefore provide an in-depth view of the rare properties that make carbon nanotubes and their hybrids unique.

Advanced self-healing asphalt composites in the pavement performance field: mechanisms at the nano level and new repairing methodologies.

In an effort to give a global view of this field of research, in this mini-review we highlight the most recent publications and patents focusing on modified asphalt pavements that contain certain reinforcing nanoparticles which impart desirable thermal, electrical and mechanical properties. In response to the increasing cost of asphalt binder and road maintenance, there is a need to look for alternative technologies and new asphalt composites, able to self-repair, for preserving and renewing the existing pavements. First, we will focus on the self-healing property of asphalt, the evidences that support that healing takes place immediately after the contact between the faces of a crack, and how the amount of healing can be measured in both the laboratory and the field. Next we review the hypothetical mechanisms of healing to understand the material behaviour and establish models to quantify the damage-healing process. Thereafter, we outline different technologies, nanotechnologies and methodologies used for self-healing paying particular attention to embedded micro-capsules, new nano-materials like carbon nanotubes and nano-fibres, ionomers, and microwave and induction heating processes.

γ-Alumina modification with long chain carboxylic acid surface nanocrystals for biocompatible polysulfone nanocomposites.

High performance polysulfone/γ-alumina biocompatible nanocomposites are reported for the first time and the effects of γ-alumina surface modification are explored. We show that some fatty acids chemisorb over the surface of γ-alumina forming nanosized self-assembled structures. These structures present thermal transitions at high temperatures, 100 °C higher than the melting temperatures of the pure acids, and are further shifted about 50 °C in the presence of polysulfone. The chemistry involved in the chemisorption is mild and green meeting the stringent bio sanitary protocols for biocompatible devices. It has been found that the self-assembled structures increase mechanical strength by about 20% despite the foreseeable lack of strong particle-matrix interactions, which manifests as small variations in both the glass transition temperature and the Young's modulus. Electron microscopy observation of fractured surfaces has revealed that some acids induce an extended region of influence around the nanoparticles and this fact has been used to explain the enhancement of mechanical strength.