Dip-pen-nanolithographic patterning of metallic, semiconductor, and metal oxide nanostructures on surfaces.

Dip-pen nanolithography (DPN) is a powerful method to pattern nanostructures on surfaces by the controlled delivery of an "ink" coating the tip of an atomic force microscope upon scanning and contacting with surfaces. The growing interest in the use of nanoparticles as structural and functional elements for the fabrication of nanodevices suggests that the DPN-stimulated patterning of nanoparticles on surfaces might be a useful technique to assemble hierarchical architectures of nanoparticles that could pave methodologies for functional nanocircuits or nanodevices. This Review presents different methodologies for the nanolithographic patterning of metallic, semiconductor, and metal oxide nanostructures on surfaces. The mechanisms involved in the formation of the nanostructures are discussed and the effects that control the dimensions of the resulting patterns are reviewed. The possible applications of the nanostructures are also addressed.

Reversible switching of quantum cascade laser-modes using a pH-responsive polymeric cladding as transducer.

We present a novel approach for the reversible switching of the emission wavelength of a quantum cascade laser (QCL) using a halochromic cladding. An air-waveguide laser ridge is coated with a thin layer of polyacrylic acid. This cladding introduces losses corresponding to the absorption spectrum of the polymer. By changing the state of the polymer, the absorption spectrum and losses change, inducing a shift of 7 cm(-1) in the emission wavelength. This change is induced by exposure to acidic or alkaline vapors under ambient conditions and is fully reversible. Such lasers can be used as multi-color light source and as sensor for atmospheric pH.

Nanoparticle-enzyme hybrid systems for nanobiotechnology.

Biomolecule-nanoparticle (NP) [or quantum-dot (QD)] hybrid systems combine the recognition and biocatalytic properties of biomolecules with the unique electronic, optical, and catalytic features of NPs and yield composite materials with new functionalities. The biomolecule-NP hybrid systems allow the development of new biosensors, the synthesis of metallic nanowires, and the fabrication of nanostructured patterns of metallic or magnetic NPs on surfaces. These advances in nanobiotechnology are exemplified by the development of amperometric glucose sensors by the electrical contacting of redox enzymes by means of AuNPs, and the design of an optical glucose sensor by the biocatalytic growth of AuNPs. The biocatalytic growth of metallic NPs is used to fabricate Au and Ag nanowires on surfaces. The fluorescence properties of semiconductor QDs are used to develop competitive maltose biosensors and to probe the biocatalytic functions of proteases. Similarly, semiconductor NPs, associated with electrodes, are used to photoactivate bioelectrocatalytic cascades while generating photocurrents.

Layer-by-layer assembly of titania nanoparticles based ionic networks.

Recently nanoparticles ionic networks were reported in the frame of the remarkable development of new inorganic-organic hybrid materials based on nanoparticles assembly. In this article a layer-by-layer deposition method for the formation of imidazolium-based assemblies of photocatalytic titania nanoparticles is presented. This provides a new route for the controlled processing of this promising class of materials.

Diagnosing viruses by the rolling circle amplified synthesis of DNAzymes.

Circular DNA is used as a template for the amplified detection of M13 phage ssDNA by a rolling circle amplification (RCA) process that synthesizes DNAzyme chains, thus enabling the colorimetric or chemiluminescent detection of the analyte.

Encoded and enzyme-activated nanolithography of gold and magnetic nanoparticles on silicon.

A C18 monolayer-functionalized Si surface is electrochemically patterned to yield a carboxylic acid-terminated pattern. Tyramine is covalently linked to the pattern to yield an encoded nanostructure for the enzyme tyrosinase. The biocatalytic oxidation of the tyramine residues yields catechol moieties that control the assembly of boronic acid-functionalized Au nanoparticles (NPs) or magnetic NPs. The different NPs are linked to the patterns by the formation of complexes between the boronic acid residues or Fe3+ ions and the catechol ligands.

Following aptamer-thrombin binding by force measurements.

The rupture forces between an aptamer (1)-functionalized AFM tip and a thrombin-modified Au surface are analyzed. The rupture force for a single aptamer/thrombin complex is determined as approximately 4.45 pN. The analysis of the system reveals that the rupture forces correspond to the melting of the G-quadruplex structure of the aptamer bound to the thrombin. This melting of the G-quadruplex leads to the dissociation of the aptamer/thrombin complex.

Cyclic control of the surface properties of a monolayer-functionalized electrode by the electrochemical generation of Hg nanoclusters.

Hg(2+) ions are bound to a 1,4-benzenedimethanethiol (BDMT) monolayer assembled on a Au electrode. Electrochemical reduction of the Hg(2+)-BDMT monolayer to Hg(+)-BDMT (at E degrees =0.48 V) and subsequently to Hg(0)-BDMT (at E degrees =0.2 V) proceeds with electron-transfer rate constants of 8 and 11 s(-1), respectively. The Hg(0) atoms cluster into aggregates that exhibit dimensions of 30 nm to 2 microm, within a time interval of minutes. Electrochemical oxidation of the nanoclusters to Hg(+) and further oxidation to Hg(2+) ions proceeds with electron-transfer rate constants corresponding to 9 and 43 s(-1), respectively, and the redistribution of Hg(2+) on the thiolated monolayer occurs within approximately 15 s. The reduction of the Hg(2+) ions to the Hg(0) nanoclusters and their reverse electrochemical oxidation proceed without the dissolution of mercury species to the electrolyte, implying high affinities of Hg(2+), Hg(+), and Hg(0) to the thiolated monolayer. The electrochemical transformation of the Hg(2+)-thiolated monolayer to the Hg(0)-nanocluster-functionalized monolayer is characterized by electrochemical means, surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact-angle measurements. The Hg(0)-nanocluster-modified surface reveals enhanced hydrophobicity (contact angle 76 degrees ) as compared to the Hg(2+)-thiolated monolayer (contact angle 57 degrees ). The hydrophobic properties of the Hg(0)-nanocluster-modified electrode are further supported by force measurements employing a hydrophobically modified AFM tip.

Switchable surface properties through the electrochemical or biocatalytic generation of Ag0 nanoclusters on monolayer-functionalized electrodes.

The electroswitchable and the biocatalytic/electrochemical switchable interfacial properties of a Ag(+)-biphenyldithiol (BPDT) monolayer associated with a Au surface are described. Upon the application of a potential corresponding to -0.2 V the Ag(+)-BPDT is reduced to the Ag(0)-BPDT interface, and silver nanoclusters are generated on the interface. The application of a potential that corresponds to 0.2 V reoxidizes the monolayer to the Ag(+)-BPDT monolayer. The reversible electrochemical transformation of the Ag(+)-BPDT monolayer and of the Ag(0)-BPDT surface was followed by electrochemical means and surface plasmon resonance spectroscopy (SPR). The SPR experiments enabled us to follow the kinetics of nanoclustering of Ag(0) on the surface. The hydrophobic/hydrophilic properties of the surface are controlled by the electrochemically induced transformation of the interface between the Ag(+)-BPDT and Ag(0)-BPDT states. The Ag(0)-BPDT monolayer reveals enhanced hydrophilicity. The hydrophobic/hydrophilic properties of the interface were probed by contact angle measurements and force interactions with a hydrophobically-functionalized AFM tip. The Ag(0)-BPDT interface was also biocatalytically generated using alkaline phosphatase, AlkPh, and p-aminophenyl phosphate as substrate. The biocatalytically generated p-aminophenol reduces Ag(+) ions associated with the surface to Ag(0) nanoclusters. This enables the cyclic biocatalytic/electrochemical control of the surface properties of the modified electrode.

Magnetoswitchable controlled hydrophilicity/hydrophobicity of electrode surfaces using alkyl-chain-functionalized magnetic particles: application for switchable electrochemistry.

Magnetic nanoparticles consisting of undecanoate-capped magnetite (average diameter approximately 4.5 nm; saturated magnetization, M(s), 38.5 emu g(-1)) are used to control and switch the hydrophobic or hydrophilic properties of the electrode surface. A two-phase system consisting of an aqueous buffer solution and a toluene phase that includes the suspended capped magnetic nanoparticles is used to control the interfacial properties of the electrode surface. The magnetic attraction of the functionalized particles to the electrode by means of an external magnet yields a hydrophobic interface that acts as an insulating layer, prohibiting interfacial electron transfer. The retraction of the magnetic particles from the electrode to the upper toluene phase by means of the external magnet generates a hydrophilic electrode that reveals effective interfacial electron transfer. The electron-transfer resistance and double-layer capacitance of the electrode surface upon the attraction and retraction of the functionalized magnetic particles to and from the electrode, respectively, by means of the external magnet were probed by Faradaic impedance spectroscopy (R(et) = 170 Omega and C(dl) = 40 microF sm(-2) in the hydrophilic state of the electrode and R(et) = 22 k Omega and C(dl) = 0.5 microF sm(-2) in the hydrophobic state of the interface). The magnetoswitchable control of the interface enables magnetic switching of the bioelectrocatalytic oxidation of glucose in the presence of glucose oxidase and ferrocene dicarboxylic acid to "ON" and "OFF" states.