Photocatalytic Hydrogen Generation in Surfactant-Free, Aqueous Organic Nanoparticle Dispersions.

Hydrogen generation in electrostatically stabilized, aqueous organic nanoparticle dispersions is investigated. For this purpose, organic nanoparticle dispersions are synthesized in water by nanoprecipitation from tetrahydrofuran and stabilized by charging through strong molecular electron acceptors. The dispersions are stable for more than 10 weeks on the shelf and during the photocatalytic process, despite the continuous transfer of charges between the reactants. The hydrogen generation in the electrostatically stabilized dispersions outperforms the hydrogen generation in organic nanoparticle dispersions which contain the common stabilizer sodium dodecyl sulfate.

Magnetic Properties and Mössbauer Spectroscopy of Fe3O4/CoFe2O4 Nanorods.

Fe3O4/CoFe2O4 nanorods were obtained via a simple seed-mediated synthesis. Nanorods were used as seeds to grow CoFe2O4 by thermal codecomposition of the cobalt(II) and iron(III) acetylacetonate precursors. The growth process was monitored by electron microscopy (SEM, TEM), and the resulting nanorods were characterized by powder X-ray diffraction analysis and IR and Raman spectroscopy. Magnetometry and AC susceptometry studies revealed a distribution of Néel relaxation times with an average blocking temperature of 140 K and a high-field magnetization of 42 Am2/kg. Complementarily recorded 57Fe-Mössbauer spectra were consistent with the Fe3O4/CoFe2O4 spinel structure and exhibited considerable signs of spin frustration, which was correlated to the internal and surface structure of the nanorods.

Supported Intermetallic PdZn Nanoparticles as Bifunctional Catalysts for the Direct Synthesis of Dimethyl Ether from CO-Rich Synthesis Gas.

The single-step syngas-to-dimethyl ether (STD) process entails economic and technical advantages over the current industrial two-step process. Pd/ZnO-based catalysts have recently emerged as interesting alternatives to currently used Cu/ZnO/Al2 O3 catalysts, but the nature of the active site(s), the reaction mechanism, and the role of Pd and ZnO in the solid catalyst are not well established. Now, Zn-stabilized Pd colloids with a size of 2 nm served as the key building blocks for the methanol active component in bifunctional Pd/ZnO-γ-Al2 O3 catalysts. The catalysts were characterized by combining high-pressure operando X-ray absorption spectroscopy and DFT calculations. The enhanced stability, longevity, and high dimethyl ether selectivity observed makes Pd/ZnO-γ-Al2 O3 an effective alternative system for the STD process compared to Cu/ZnO/γ-Al2 O3 .

Structuralization of magnetic nanoparticles in 5CB liquid crystals.

This work is devoted to the study of highly stable composite systems of the liquid crystal 4-n-pentyl-4'-cyanobiphenyl (5CB) doped with CoFe2O4 magnetic nanoparticles. Ferronematic samples were prepared with two different weight concentrations: sample A 0.085 wt% and sample B 0.062 wt%. The interaction of CoFe2O4 nanoparticles with the liquid crystal was investigated by small-angle X-ray-scattering and magnetization measurements. The obtained results reveal aggregates formed by magnetic nanoparticles that are oriented in the nematic phase. Moreover, the prepared samples show unexpected behaviour of a sudden change in magnetization, which is unusual for such ferronematics.

Doping of nematic cyanobiphenyl liquid crystals with mesogen-hybridized magnetic nanoparticles.

Magnetic nanoparticles (MNPs) functionalized with (pro-)mesogenic ligands are implemented into a nematic liquid crystal (LC) and studied regarding both colloidal stability and magneto-optical behavior. In this study, the particle surface is specifically engineered to tune the MNP interactions with the LC host. For this purpose, four types of (pro-)mesogenic ligands (ML) are synthesized, which are composed of three structural parts, i.e., a rigid, LC motif (i.e., cyanobiphenyl) and a functional group for nanoparticle binding, both linked via a flexible spacer of different alkyl chain lengths. Electrostatically stabilized CoFe2O4 and γ-Fe2O3 nanoparticles with narrow size distribution and sizes below 3 nm are obtained via co-precipitation and subsequently functionalized to yield MNP@ML nanoparticles. Studies on the behaviour of the MNP@ML nanoparticles in the commercial LC host (i.e., 4-pentyl-4'-cyanobiphenyl (5CB)) in the bulk and in thin films in LC test cells, reveal the initial formation of some heterogeneities after transition from the isotropic to the nematic phase. Homogenous MNP@ML-5CB hybrids with long-term, colloidal stability, however, are obtained after magnetic separation of initially formed particle aggregates. In particular, MLs with carboxy groups and high structural flexibility (i.e., long linker lengths) are shown to be well suited to form stable MNP colloids, allowing for high MNP doping levels. As compared to undoped 5CB, the CoFe2O4@MLx-5CB hybrids show an increased sensitivity to the magnetic field, affecting the Fréedericksz transition. The strongest effect, however, is observed in magnetic and electric fields. The coupling of the ultrasmall, spherical MNPs with the LC director in the magnetic field suggests the formation of LC-induced, anisometric MNP clusters.

Continuous flow synthesis of atom-precise platinum clusters.

Subnanometer clusters with precise atom numbers hold immense potential for applications in catalysis, as single atoms can significantly impact catalytic properties. Typically, inorganic clusters are produced using batch processes with high dilutions, making the scale-up of these processes time-consuming and its reproducibility challenging. While continuous-flow systems have been employed for organic synthesis and, more recently, nanoparticle preparation, these approaches have only rarely been applied to cluster synthesis. In a flexible, continuous flow synthesis platform, we integrate multiple continuous stirred tank reactors (CSTR) into a cascade to synthesize clusters with a precise number of atoms, demonstrating the potential of this approach for atom precise cluster synthesis and expanding the application of continuous-flow systems beyond organic synthesis.

Pd-In intermetallic nanoparticles with high catalytic selectivity for liquid-phase semi-hydrogenation of diphenylacetylene.

Intermetallic nanoparticles (NPs) are highly interesting materials in catalysis due to their geometrically ordered structures and altered electronic properties, but the synthesis of defined intermetallic NPs remains a challenge. Here, we report a novel and facile approach for the synthesis of intermetallic Pd-In NPs in ionic liquids (ILs) at moderate temperatures. Depending on the molar ratio of the metal precursors and the reaction temperature, single-phase Pd3In, PdIn and Pd3In7 NPs were obtained, which was confirmed, e.g. by powder X-ray diffraction, electron microscopy, and optical emission spectroscopy with inductively coupled plasma. The Pd-In NPs stabilized in ILs were used as catalysts in the liquid-phase semi-hydrogenation of diphenylacetylene (DPA). Highly ordered PdIn NPs with a CsCl type structure revealed both high activity and selectivity to cis-stilbene even at full DPA conversion. Intermetallic compounds such as PdIn can be used to isolate contiguous Pd atoms with another base metal into single Pd sites, thereby increasing the catalytic selectivity of Pd while stabilizing the individual sites in the intermetallic structures. This work may provide new pathways for the synthesis of single-phase intermetallic NPs and future insights into a more rational design of bimetallic catalysts with specific catalytic properties.

Bimetallic Pd/Sn-based Nanoparticles and their Catalytic Properties in the Semihydrogenation of Diphenylacetylene.

Multimetallic nanoparticles often enhance the catalytic performance of their monometallic counterparts by increasing reaction rates, catalyst selectivity, and/or stability. A prerequisite for understanding structure- and composition-associated properties, however, is the careful design of multimetallic nanoparticles with various structures and compositions. Here, bimetallic Pd/Sn-based nanoparticles are prepared with a tunable composition and structure exploiting ionic liquids (ILs) as reaction medium (i. e., methyltrioctylammonium bis(trifluoromethylsulfonyl)imide). The nanoparticles are obtained in a one-pot synthetic procedure by reducing the metal salt precursors with triethylborohydride in the IL. The results show that the reaction parameters, in particular the nature and ratio of the Pd2+ /Sn2+ precursors as well as the reaction temperature, influence NP formation and composition. X-ray diffraction with Rietveld analysis and transmission electron microscopy are employed to determine NP size and phase composition. Under optimized reaction conditions Pd2 Sn or PdSn nanocrystals are formed as single-phase products after introducing an additional annealing step at 200 °C. Nanocrystals with intermetallic composition reveal enhanced catalytic properties in the semihydrogenation of diphenylacetylene which was used as a model reaction.

NaCl-template-based synthesis of TiO2-Pd/Pt hollow nanospheres for H2O2 direct synthesis and CO oxidation.

TiO2 hollow nanosphere (HNS) are prepared via NaCl templates in a one-pot approach. The NaCl templates are realized by solvent/anti-solvent strategies and coated with TiO2via controlled hydrolysis of Ti-alkoxides. The NaCl template can be easily removed by washing with water, and the TiO2 HNS are finally impregnated with Pd/Pt. Electron microscopy shows TiO2 HNS with an outer diameter of 140-180 nm, an inner cavity of 80-100 nm, and a wall thickness of 30-40 nm. The TiO2 HNS exhibit high surface area (up to 370 m2 g-1) and pore volume (up to 0.28 cm3 g-1) with well-distributed small Pd/Pt nanoparticles (Pt: 3-4 nm, Pd: 3-7 nm). H2O2 direct synthesis (room temperature, liquid phase) and CO oxidation (up to 300 °C, gas phase) are used to probe the catalytic properties and result in a good stability of the HNS structure as well as a promising performance with a H2O2 selectivity of 63% and a productivity of 3390 mol kgPd-1 h-1 (TiO2-Pd HNS, 5 wt%) as well as CO oxidation light-out temperatures of 150 °C (TiO2-Pt HNS, 0.7 wt%).

Clustering in ferronematics-The effect of magnetic collective ordering.

Clustering of magnetic nanoparticles can dramatically change their collective magnetic properties, and it consequently may influence their performance in biomedical and technological applications. Owing to tailored surface modification of magnetic particles such composites represent stable systems. Here, we report ferronematic mixtures that contain anisotropic clusters of mesogen-hybridized cobalt ferrite nanoparticles dispersed in liquid crystal host studied by different experimental methods-magnetization measurements, small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and capacitance measurements. These measurements reveal non-monotonic dependencies of magnetization curves and the Fréedericksz transition on the magnetic nanoparticles concentration. This can be explained by the formation of clusters, whose structures were determined by SAXS measurements. Complementary to the magnetization measurements, SANS measurements of the samples were performed for different magnetic field strengths to obtain information on the orientation of the liquid crystal molecules. We demonstrated that such hybrid materials offer new avenues for tunable materials.

Palladium-Based Bimetallic Nanocrystal Catalysts for the Direct Synthesis of Hydrogen Peroxide.

The direct synthesis of H2 O2 from H2 and O2 is a strongly desired reaction for green processes and a promising alternative to the commercialized anthraquinone process. The design of efficient catalysts with high activity and H2 O2 selectivity is highly desirable and yet challenging. Metal dopants enhance the performance of the active phase by increasing reaction rates, stability, and/or selectivity. The identification of efficient dopants relies mostly on catalysts prepared with a random and non-uniform deposition of active and promoter phases. To study the promotional effects of metal doping on Pd catalysts, we employ colloidal, bimetallic nanocrystals (NCs) to produce catalysts in which the active and doping metals are colocalized to a fine extent. In the absence of any acid and halide promotors, PdSn and PdGa NCs supported on acid-pretreated TiO2 (PdSn/s-TiO2 , PdGa/s-TiO2 ) were highly efficient and outperformed the monometallic Pd catalyst (Pd/s-TiO2 ), whereas in the presence of an acid promotor, the overall H2 O2 productivity was also further enhanced for the Ni-, Ga-, In-, and Sn-doped catalysts with respect to Pd/s-TiO2 .

Deposition of palladium nanoparticles on self-assembled, zinc-induced tubulin macrotubes and sheets.

Co-factors control the GTP-induced assembly of tubulin protein into a variety of superstructures with defined geometry at the nanometre scale: microtubules, macrotubes, sheets, or spirals/rings. We report the Zn2+ ion-induced assembly of tubulin protein into sheet-like or tubular structures. Free functional groups of amino acids on the surface of the protein biopolymer provide nucleation sites for further deposition of small metal nanoparticles. This study describes the synthesis of metal particle--protein hybrids by a two-step chemical process that directs metal nanoparticle nucleation at specific surface sites by applying these tubulin assemblies as biotemplates. The hybrids are characterized by transmission electron microscopy (TEM) and scanning force microscopy (SFM). The present study demonstrates the potential and general applicability of tubulin assemblies as tools for the nanofabrication of nanoparticle arrays exhibiting various geometries.

Moving Frontiers in Transition Metal Catalysis: Synthesis, Characterization and Modeling.

Nanosized transition metal particles are important materials in catalysis with a key role not only in academic research but also in many processes with industrial and societal relevance. Although small improvements in catalytic properties can lead to significant economic and environmental impacts, it is only now that knowledge-based design of such materials is emerging, partly because the understanding of catalytic mechanisms on nanoparticle surfaces is increasingly improving. A knowledge-based design requires bottom-up synthesis of well-defined model catalysts, an understanding of the catalytic nanomaterials "at work" (operando), and both a detailed understanding and a prediction by theoretical methods. This article reports on progress in colloidal synthesis of transition metal nanoparticles for preparation of model catalysts to close the materials gap between the discoveries of fundamental surface science and industrial application. The transition metal particles, however, often undergo extensive transformations when applied to the catalytic process and much progress has recently been achieved operando characterization techniques under relevant reaction conditions. They allow better understanding of size/structure-activity correlations in these systems. Moreover, the growth of computing power and the improvement of theoretical methods uncover mechanisms on nanoparticles and have recently predicted highly active particles for CO/CO2 hydrogenation or direct H2 O2 synthesis.

Synthesis of Bimetallic Pt/Sn-based Nanoparticles in Ionic Liquids.

We demonstrate a method for the synthesis of bimetallic nanoparticles consisting of Pt and Sn. A synthesis strategy is used in which the particular physico-chemical properties of ionic liquids (ILs) are exploited to control both nucleation and growth processes. The nanoparticles form colloidal sols of very high colloidal stability in the IL, which is particularly interesting in view of their use as quasi-homogeneous catalysts. Procedures for both nanoparticle extraction in conventional solvents and for nanoparticle precipitation are presented. The size, structure and composition of the synthesized nanocrystals are confirmed using inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM) with energy-dispersive X-ray spectroscopy (EDX). By this, we show that the nanocrystals are random-type alloy and of small (2-3 nm) size. The catalytic activity and selectivity in the hydrogenation of α,ß-unsaturated aldehydes is tested in a semi-continuous batch-type reactor. In this context, the bimetallic Pt/Sn-based nanoparticles reveal a high selectivity towards the unsaturated alcohol.

The potential of a new stable ultrasound contrast agent for site-specific targeting. An in vitro experiment.

Microbubble-based ultrasound contrast agents can be used for specific site targeting, but demonstrate time-limited opacification. We have previously demonstrated the potential of gold-bound microtubules to provide a stable ultrasound contrast effect. Aim of the present study was to test the feasibility of gold-bound microtubules specifically to bind to human thrombi and to inflammatory activated human umbilical vein endothelial cells (HUVEC) in vitro. HUVEC were incubated with tumor necrosis factor, to induce expression of adhesion molecules. Human clots and HUVEC were incubated with biotinylated monoclonal antifibrin and anti-E-selectin antibodies, respectively. Probes were incubated with excess avidin followed by biotinylated gold-bound microtubules and by secondary Cy3-anti-beta-tubulin antibody and processed for immune fluorescence microscopy. Clots were transferred in copolymer foils filled with buffer and were ultrasonographically imaged before and after their treatment with the antifibrin antibody and with biotinylated microtubules, using a broadband harmonic transducer, transmitting and receiving at a mean frequency of 1.7 MHz and 3.2 MHz. The feasibility of specific gold-bound microtubules conjugation to antibody treated clots and HUVEC was confirmed using immune fluorescence analysis. Contrast intensities of the clots significantly increased after their treatment with antifibrin antibody and incubation with gold-bound microtubules (39 +/- 2 dB versus 26 +/- 2 dB, p < 0.001) and remained high after 20 min of ultrasound exposure (37 +/- 2 dB versus 39 +/- 2 dB, p = NS). Thus, gold-bound microtubules can specifically bind to human thrombi and to endothelial cells, providing a significant contrast effect which remains stable in the ultrasound field. This may be a promising approach to target thrombi and inflammatory active atherosclerotic plaques.

Magnetic nanocomposites.

Magnetic nanocomposites are multi-component materials, typically containing nanosized magnetic materials to trigger the response to an external stimulus (i.e., an external static or alternating magnetic field). Up to now, the search for novel nanocomposites has lead to the combination of a plethora of different materials (e.g., gels, liquid crystals, renewable polymers, silica, carbon or metal organic frameworks) with various types of magnetic particles, offering exciting perspectives not only for fundamental investigations but also for application in various fields, including medical therapy and diagnosis, separations, actuation, or catalysis. In this review, we have selected a few of the most recent examples to highlight general concepts and advances in the preparation of magnetic nanocomposites and recent advances in the synthesis of magnetic nanoparticles.

Investigation of the Hydrogenation of 5-Methylfurfural by Noble Metal Nanoparticles in a Microcapillary Reactor.

On-column reaction gas chromatography (ocRGC) was successfully utilized as high-throughput platform for monitoring of the conversion and selectivity of hydrogenation of 5-methylfurfural catalyzed by polymer-stabilized Ru and Pd nanoparticles. We were able to elucidate the effect of various reaction conditions, mainly together with the catalyst loading on the conversion rate and the selectivity of the reaction. Our strategy yields significant improvements in reaction analysis times and cost effectiveness in comparison to standard methods. We are able to demonstrate that ocRGC approach provides valuable information about the reaction system that gives scientists a tool to design suitable catalytic systems for enhanced sustainable chemistry in the future.

Cleaning the Click: A Simple Electrochemical Avenue for Copper Removal from Strongly Coordinating Macromolecules.

We introduce a novel electrochemical method for the purification of complex water-soluble functional polymers contaminated with copper salts originating from copper-catalyzed azide/alkyne ligation chemistry, for which no standard purification protocol is suitable. A triethylene glycol methyl ether methacrylate (TEGMA) star polymer with 2-ureido-4H-pyrimidone (UPy) end groups was prepared via an activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) and copper-catalyzed azide/alkyne cycloaddition (CuAAc) and selected as a model system for electrolysis of an aqueous polymer solution. We systematically investigate the influence of sample concentration, voltage, and time of electrolysis on the quality of the purification. Atom emission spectroscopy (AES) reveals almost quantitative removal of copper, and size exclusion chromatography (SEC) as well as proton nuclear magnetic resonance spectroscopy (1H NMR) ensure the full integrity of the polymer under all selected conditions.

Potential of gold-bound microtubules as a new ultrasound contrast agent.

Contrast agents based on gas-filled microspheres share the problem of time limited opacification due to low stability of microbubbles. The aim of this study was to test if gold-bound microtubules provide backscattering that allows microtubules to be potentially useful as an ultrasound (US) contrast agent. Gold colloids were immobilized on protein microtubule walls. Latex balloons were filled with gold-bound microtubules or conventional left heart contrast agent and were ultrasonographically imaged in fundamental and harmonic modes. Feasibility of anti-beta-tubulin antibody conjugation to gold-bound microtubules was confirmed using immune fluorescence analysis. Gold particles were successfully bound to microtubules. Contrast intensities in latex balloons filled with gold-bound microtubules (141 +/- 35) were comparable to those with Levovist (180 +/- 35) and did not decrease significantly during continuous US imaging for 20 min (135 +/- 34 vs. Levovist 5.0 +/- 2.0). Anti-beta-tubulin antibodies were successfully conjugated to gold-bound microtubules. Gold-bound microtubules provide a persistent contrast effect, suggesting their use as an ultrasonic contrast agent with the feasibility of antibody conjugation.

Au-based bimetallic nanoparticles for the intramolecular aminoalkene hydroamination.

Bimetallic Au-based nanoparticles (Au-M where M = Pt, Pd, Cu, Ni), synthesized by simultaneous reduction of the Au salt with noble/non-noble metal salts, exhibit a high activity for the aminoalkene (2,2-diphenylpent-4-en-1-amine) hydroamination affording the 5-membered Markovnikov product. Even though the particle size and morphology of Au-M nanoparticles are comparable to the corresponding monometallic Au nanoparticles, Au-M nanoparticles display superior catalytic activity, where the selectivity for the formation of the hydroaminated product depends on the alloying metal component in the bimetallic Au nanoparticle catalyst.