Comparison between different cell sources and culture strategies for tendon tissue engineering.

The aim of this study was to evaluate the effect of an in vitro mechanical stimulation by the use of a bioreactor on an engineered tendon for 7 and 14 days and to analyze the effect of the use of different cell sources: tenocytes, dermal fibroblasts or Adipose-Derived Stem Cells (ASCs), isolated from pig tissues. Histology showed a re-organization of the neo-tissue derived from the three cell populations along the direction of the stimulus. At T7, cells morphology was preserved while an increased cellular suffering at T14 was observed for all cell populations. Tenocytes exhibited higher survival than other cells. A stable immunopositivity for collagen type 1 or 3 at both time points was also observed. In conclusion, dermal fibroblasts and ASCs represent an interesting alternative and in vitro culture with mechanical stimuli may enhance the maturation of a tendon-like tissue.

A new strategy for the decellularisation of large equine tendons as biocompatible tendon substitutes.

Tendon ruptures and/or large losses remain to be a great clinical challenge and often require full replacement of the damaged tissue. The use of auto- and allografts or engineered scaffolds is an established approach to restore severe tendon injuries. However, these grafts are commonly related to scarce biocompatibility, site morbidity, chronic inflammation and poor biomechanical properties. Recently, the decellularisation techniques of allo- or xenografts using specific detergents have been studied and have been found to generate biocompatible substitutes that resemble the native tissue. This study aims to identify a novel decellularisation protocol for large equine tendons that would produce an extracellular matrix scaffold suitable for the regeneration of injured tendons in humans. Specifically, equine tendons were treated either with tri (n-butyl) phosphate alone, or associated to multiple concentrations of peracetic acid (1, 3 and 5 %), which has never before been tested in vitro.Samples were then analysed by histology and with biochemical, biomechanical, and cytotoxicity tests. The best decellularisation protocol, resulting from these examinations, was selected and the chosen scaffold was re-seeded with murine fibroblasts. Resulting grafts were tested for cell viability, histologic analysis, DNA and collagen content. The results identified 1 % tri (n-butyl) phosphate combined with 3 % peracetic acid as the most suitable decellularised matrix in terms of biochemical and biomechanical properties. Moreover, the non-cytotoxic nature of the decellularised matrix allowed for good fibroblast reseeding, thus demonstrating a biocompatible matrix that will be suitable for tendon tissue engineering and hopefully as substitutes in severe tendon damages.

Comparison of three novel biphasic scaffolds for one-stage treatment of osteochondral defects in a sheep model.

In the last years, several tissue engineering techniques have been applied to develop different kinds of osteochondral substitutes to overcome the scarce reparative properties of this tissue. The aim of this study was to generate and compare three biphasic scaffolds in an osteochondral lesion in a large-animal model. A critical osteochondral defect was generated in the medial femoral condyle of 18 skeletally mature sheep. Three defects were left untreated, the remaining lesions were divided into three groups: 5 lesions were treated with a biphasic scaffold made of collagen type I and small cylinders of Magnesium Hydroxyapatite; 5 lesions were treated with a biphasic substituted formed by collagen type I and Wollastonite, 5 lesions were treated with a scaffold made of collagen type I and small cylinders of Wollastonite/Hydroxyapatite. Animals were sacrificed after 3 months and samples were analyzed by CT and MRI, macroscopic evaluation and histology. Our study demonstrated that one of these novel biphasic scaffolds possesses the potential for being applied for one-stage procedures for osteochondral defects.

Mechanical characterization of porcine corneas.

An experimental program has been carried out in order to investigate the mechanical behavior of porcine corneas. We report the results of inflation tests on the whole cornea and uniaxial tests on excised corneal strips, performed on 51 fresh porcine eyes. Uniaxial tests have been performed on specimens cut from previously inflated corneas. The cornea behavior is characterized by means of elastic stiffness, measured on both average pressure-apex displacement and average uniaxial stress-strain curves; and by means of transversal contraction coefficient, peak stress, and failure stress measured on uniaxial stress-strain curves. Uniaxial tests performed on excised strips allowed to measure the anisotropy in the corneal stiffness and to compare the stiffness of the cornea with the one of the sclera. Viscous properties of the cornea have been obtained through uniaxial relaxation curves on excised corneal strips. The relevant geometrical parameters have been measured and, with the aid of the elastic thin shell theory, a stress-strain curve has been derived from the average inflation test data and compared with similar data available in the literature. The experimental system has been developed in view of future applications to the mechanical testing of both porcine and human corneas.

How can cells sense the elasticity of a substrate? An analysis using a cell tensegrity model.

A eukaryotic cell attaches and spreads on substrates, whether it is the extracellular matrix naturally produced by the cell itself, or artificial materials, such as tissue-engineered scaffolds. Attachment and spreading require the cell to apply forces in the nN range to the substrate via adhesion sites, and these forces are balanced by the elastic response of the substrate. This mechanical interaction is one determinant of cell morphology and, ultimately, cell phenotype. In this paper we use a finite element model of a cell, with a tensegrity structure to model the cytoskeleton of actin filaments and microtubules, to explore the way cells sense the stiffness of the substrate and thereby adapt to it. To support the computational results, an analytical 1D model is developed for comparison. We find that (i) the tensegrity hypothesis of the cytoskeleton is sufficient to explain the matrix-elasticity sensing, (ii) cell sensitivity is not constant but has a bell-shaped distribution over the physiological matrix-elasticity range, and (iii) the position of the sensitivity peak over the matrix-elasticity range depends on the cytoskeletal structure and in particular on the F-actin organisation. Our model suggests that F-actin reorganisation observed in mesenchymal stem cells (MSCs) in response to change of matrix elasticity is a structural-remodelling process that shifts the sensitivity peak towards the new value of matrix elasticity. This finding discloses a potential regulatory role of scaffold stiffness for cell differentiation.

Blood exposure has a negative effect on engineered cartilage.

PURPOSE: The aim of this study was to investigate the in vitro effect of different concentrations of blood on the morphological and biochemical properties of engineered cartilage. Previous studies have demonstrated a negative effect of blood on native cartilage; however, the effect of the contact of blood on engineered cartilage is unclear. METHODS: Articular chondrocytes were isolated from swine joints, expanded in monolayer culture, and seeded onto collagen membranes. The seeded membranes were cultured for 3 days in the presence of different concentrations of peripheral blood. Some samples were retrieved at the end of the blood contact, others after 21 additional days of standard culture conditions, in order to investigate the "long-term effect" of the blood contact. RESULTS: All seeded samples showed an increase in the weight and an evident cartilage-like matrix production. A concentration-dependent reduction in the mitochondrial activity due to blood contact was shown at the earlier culture time, followed by a partial recover at the longer culture time. CONCLUSION: A blood contact of 3 days affected the chondrocytes' activity and determined a delay in the maturation of the engineered cartilage. These findings have clinical relevance, as autologous chondrocytes seeded onto biological scaffolds has become an established surgical method for articular cartilage repair. Therefore, further investigation into material sciences should be encouraged for the development of scaffold protecting the reparative cells from the blood insult.

Healing of meniscal tissue by cellular fibrin glue: an in vivo study.

Menisci represent fundamental structures for the maintenance of knee homeostasis, playing a key role in knee biomechanics. However, their intrinsic regenerative potential is poor. As a consequence, when a lesion occurs and the meniscus is partially removed by surgery, knee mechanics is subject to dramatic changes. These have been demonstrated to lead often to the development of early osteoarthritis. Therefore, menisci should be repaired whenever possible. In the last decades, tissue engineering approaches have been advocated to improve the reparative processes of joint tissues. In this study, the bonding capacity of an articular chondrocytes-fibrin glue hydrogel was tested as a biologic glue to improve the bonding between two swine meniscal slices in a nude mouse model. The composites were wrapped with acellular fibrin glue and implanted in subcutaneous pouches of nude mice for 4 weeks. Upon retrieval, a firm gross bonding was observed in the experimental samples while none of the control samples, prepared with acellular fibrin glue at the interface, presented any sign of bonding. This was consistent with the histological and scanning electron microscope findings. In particular, a fibrocartilaginous tissue was found at the interface between the meniscal slices, partially penetrating the native meniscus tissue. In order to overcome the lack of regenerative properties of the meniscus, the rationale of using cellular fibrin glue is that fibrin provides immediate stability while carrying cells in the site of lesion. Moreover, fibrin gel is recognized as an optimal scaffold for cell embedding and for promoting fibrocartilaginous differentiation of the cells which synthesize matrix having healing property. These results demonstrated the potential of this model for improving the meniscal bonding. However, further orthotopic studies in a large animal model are needed to evaluate its potential for clinical application.

Design, fabrication, and characterization of a composite scaffold for bone tissue engineering.

Poly(lactide-co-glycolide) (PLGA) scaffolds have been successfully used in bone tissue engineering, with or without hydroxyapatite (HA) and with a macroporosity given either by simple PLGA sphere packaging and/or by leaching out NaCl. The objective of this work was the optimization of the design parameters for bone tissue engineering scaffolds made by sintering microspheres of PLGA, HA nanocrystals for matrix reinforcement and osteoconduction, and salt crystals for macroporosity and control of matrix pore size. Microsphere fabrication by a single-emulsion and solvent evaporation technique was first optimized to obtain a high yield of PLGA microspheres with a diameter between 80 and 300 microm. The influence of the sintering process and matrix composition on the scaffold structure was then evaluated morphologically and mechanically. Three scaffold types were tested for biocompatibility by culturing with human fibroblasts for up to 14 days. The most important parameters to obtain microspheres with the selected diameter range were the viscosity ratio of the dispersed phase to the continuous phase and the relative volume fraction of the 2 phases. The Young's modulus and the ultimate strength of the sintered matrices ranged between 168-265 MPa and 6-17 MPa, respectively, within the range for trabecular bone. Biocompatibility was demonstrated by fibroblast adhesion, proliferation, and spreading throughout the matrix. This work builds upon previous work of the PLGA/HA sintering technique to give design criteria for fabricating a bone tissue engineered matrix with optimized morphological, functional, and biological properties to fit the requirements of bone replacements.

MANOTA: a promising bifunctional chelating agent for copper-64 immunoPET.

Improved bifunctional chelating agents (BFC) are required for copper-64 radiolabelling of monoclonal antibodies (mAbs) under mild conditions to yield stable, target-specific imaging agents. Four different bifunctional chelating agents (BFC) were evaluated for Fab (Fragment antigen binding) conjugation and radiolabelling with copper-64. Two DOTA- (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) and two NOTA- (1,4,7-triazacyclononane-1,4,7-triacetic acid) derivatives bearing a p-benzyl-isothiocyanate group were conjugated to Fab-trastuzumab - which targets the HER2/neu receptor - and the average number of chelators attached ranged from 2.4 to 4.3 macrocycles per Fab. Labelling of the immunoconjugate with copper-64 was achieved in high radiochemical yields after 45 min at 37 °C, and the radiochemical purity of each 64Cu-BFC-Fab-trastuzumab reached 97% after purification. The affinity of each 64Cu-BFC-Fab-trastuzumab ranged between 10 and 50 nM as evaluated by in vitro saturation assays using the HCC1954 breast cancer cell line. PET-MR imaging and biodistribution studies were performed in mice bearing breast cancer BT-474 xenografts. BT-474 tumours were clearly visualized on PET images at 4 and 24 hours post-injection. The tumour uptake of 64Cu-BFC-Fab-trastuzumab reached 8.9 to 12.8% ID g-1 24 hours post-injection and significant differences in non-specific liver uptake were observed depending on the BFC conjugated, the lowest being observed with MANOTA. These results show that MANOTA is a valuable tool for copper-64 radiolabelling.

Minor changes in the macrocyclic ligands but major consequences on the efficiency of gold nanoparticles designed for radiosensitization.

Many studies have been devoted to adapting the design of gold nanoparticles to efficiently exploit their promising capability to enhance the effects of radiotherapy. In particular, the addition of magnetic resonance imaging modality constitutes an attractive strategy for enhancing the selectivity of radiotherapy since it allows the determination of the most suited delay between the injection of nanoparticles and irradiation. This requires the functionalization of the gold core by an organic shell composed of thiolated gadolinium chelates. The risk of nephrogenic systemic fibrosis induced by the release of gadolinium ions should encourage the use of macrocyclic chelators which form highly stable and inert complexes with gadolinium ions. In this context, three types of gold nanoparticles (Au@DTDOTA, Au@TADOTA and Au@TADOTAGA) combining MRI, nuclear imaging and radiosensitization have been developed with different macrocyclic ligands anchored onto the gold cores. Despite similarities in size and organic shell composition, the distribution of gadolinium chelate-coated gold nanoparticles (Au@TADOTA-Gd and Au@TADOTAGA-Gd) in the tumor zone is clearly different. As a result, the intravenous injection of Au@TADOTAGA-Gd prior to the irradiation of 9L gliosarcoma bearing rats leads to the highest increase in lifespan whereas the radiophysical effects of Au@TADOTAGA-Gd and Au@TADOTA-Gd are very similar.

Mechanobiology of engineered cartilage cultured under a quantified fluid-dynamic environment.

Natural cartilage remodels both in vivo and in vitro in response to mechanical forces and hence mechanical stimulation is believed to have a potential as a tool to modulate extra-cellular matrix synthesis in tissue-engineered cartilage. Fluid-induced shear is known to enhance chondrogenesis on animal cells. A well-defined hydrodynamic environment is required to study the biochemical response to shear of three-dimensional engineered cell systems. We have developed a perfused-column bioreactor in which the culture medium flows through chondrocyte-seeded porous scaffolds, together with a computational fluid-dynamic model of the flow through the constructs' microstructure. A preliminary experiment of human chondrocyte growth under static versus dynamic conditions is described. The median shear stress imposed on the cells in the bioreactor culture, as predicted by the CFD model, is 3 x 10(-3) Pa (0.03 dyn/cm(2)) at a flow rate of 0.5 ml/min corresponding to an inlet fluid velocity of 44.2 mum/s. Providing a fluid-dynamic environment to the cells yielded significant differences in cell morphology and in construct structure.

Hemodynamic effects of attachment modes and device design of a thoracic artificial lung.

A thoracic artificial lung (TAL) was designed to treat respiratory insufficiency, acting as a temporary assist device in acute cases or as a bridge to transplant in chronic cases. We developed a computational model of the pulmonary circulatory system with the TAL inserted. The model was employed to investigate the effects of parameter values and flow distributions on power generated by the right ventricle, pulsatility in the pulmonary system, inlet flow to the left atrium, and input impedance. The ratio of right ventricle (RV) power to cardiac output ranges between 0.05 and 0.10 W/(L/min) from implantation configurations of low impedance to those of high impedance, with a control value of 0.04 W/(L/min). Addition of an inlet compliance to the TAL reduces right heart power (RHP) and impedance. A compliant TAL housing reduces flow pulsatility in the fiber bundle, thus affecting oxygen transfer rates. An elevated bundle resistance reduces flow pulsatility in the bundle, but at the expense of increased right heart power. The hybrid implantation mode, with inflow to the TAL from the proximal pulmonary artery (PA), outflow branches to the distal PA and the left atrium (LA), a band around the PA between the two anastomoses, and a band around the outlet graft to the LA, is the best compromise between hemodynamic performance and preservation of some portion of the nonpulmonary functions of the natural lungs.

Virtual extracorporeal circulation process.

Virtual instruments for an extracorporeal circulation (ECC) process were developed to simulate the reactions of a patient to different artificial perfusion conditions. The computer simulation of the patient takes into account the hydraulic, volume, thermal and biochemical phenomena and their interaction with the devices involved in ECC (cannulae dimensions, oxygenator and filter types, pulsatile or continuous pump and thermal exchangers). On the basis of the patient's initialisation data (height, weight, Ht) and perfusion variables (pump flow rate, water temperature, gas flow rate and composition) imposed by the operator, the virtual ECC monitors simulated arterial and venous pressure tracings in real time, along with arterial and venous flow rate tracings, urine production tracing and temperature levels. Oxyhemoglobin arterial and venous blood saturation together with other related variables (pO2, pCO2, pH, HCO3 are also monitored. A drug model which allows the simulation of the effect of vasodilator and diuretic drugs is also implemented. Alarms are provided in order to check which variables (pressure, saturation, pH, urine flow) are out of the expected ranges during the ECC simulation. Consequently the possibility of modifying the control parameters of the virtual devices of the ECC in run-time mode offers an interaction mode between the operator and the virtual environment.

Factors affecting the respiratory ratio during cardiopulmonary by-pass.

Despite the wide use of hypothermic cardiopulmonary bypass (CPB) during open heart surgery there is little information about the patient metabolism. In particular no complete studies addressed the assessment of the respiratory ratio (RR) during CPB at different core temperatures. Therefore a clinical study was performed in order to evaluate the oxygen consumption (VO2) and carbon dioxide production (VCO2) in adult patients with valvular or coronary heart disease undergoing CPB. Twenty-five patients (16 male, 9 female) aged between 26 and 76 (54.2+/-12.4 mean +/- SD) were the subjects of this study. Measurements (102) were taken at various perfusion flow rates (from 1.6 to 2.9 L/min(-1) x m(-2)) and temperatures (from 24 to 37 degrees C). Arterial and mixed venous gas analyses were performed and O2 and CO2 concentrations were calculated, including the carbamate contribute. We calculated VO2, VCO2 and then RR from artero-venous differences in O2 and CO2 contents. Both VO2 and VCO2 showed a positive linear correlation with temperature (r = 0.82 and r = 0.59 respectively) and with blood flow rate (r = 0.61 and r = 0.29 respectively). The mean RR was 0.78+/-0.28 and more than 84% of RR values fell in the range 0.5-1.2. No significant correlation between RR and temperature and blood flow rate was observed. VCO2 and RR showed a positive linear correlation with the gas to blood flow rate ratio (r = 0.37 and r = 0.49 respectively).

The assignment of velocity profiles in finite element simulations of pulsatile flow in arteries.

In this paper we present a new method for the assignment of pulsatile velocity profiles as input boundary conditions in finite element models of arteries. The method is based on the implementation of the analytical solution for developed pulsatile flow in a rigid straight tube. The analytical solution provides the fluid dynamics of the region upstream from the fluid domain to be investigated by means of the finite element approach. In standard fluid dynamics finite element applications, the inlet developed velocity profiles are achieved assuming velocity boundary conditions to be easily implementable-such as flat or parabolic velocity profiles-applied to a straight tube of appropriate length. The tube is attached to the inflow section of the original fluid domain so that the flow can develop fully. The comparison between the analytical solution and the traditional numerical approach indicates that the analytical solution has some advantages over the numerical one. Moreover, the results suggest that subroutine employment allows a consistent reduction in solving time especially for complex fluid dynamic model, and significantly decreases the storage and memory requirements for computations.

An approach to computer automation of the extracorporeal circulation.

In order to move towards extracorporeal circulation (ECC) automation, a virtual simulation of the process was designed. The ECC model is composed of a virtual patient linked to a virtual ECC circuit. A user interface panel allows to set control parameters for the simulation and to visualize results. It is possible to switch between manual and automatic control. Meaningful hemodynamic and hematochemical variables are continuously shown along with a score (from 0 to 10). The virtual model can play a crucial role in educating and training the personnel devoted to the managing of the heart-lung machine.

Decellularized ovine arteries as small-diameter vascular grafts.

Atherosclerosis and its complications still represent the leading cause of death in the developed countries. While autologous blood vessels may be regarded as the best solution for peripheral and coronary bypass, they are unavailable in most patients. Even though tissue engineering techniques are often applied to the development of small-diameter vascular grafts, limiting factors of this approach are represented by the lack of essential extracellular matrix proteins and/or poor biomechanical properties of the scaffolds used. Along these lines, the aim of this study was to develop a decellularization protocol for ovine carotids to be used as suitable small-diameter vascular grafts. Samples were treated either with sodium dodecyl sulphate (SDS) or with Trypsin and Triton X-100; a final nuclease digestion was performed for both protocols. Morphological analyses demonstrate complete removal of nuclei and cellular components in treated vessels, also confirmed by significant reduction in wall thickness and DNA content. Essential extracellular matrix proteins such as collagen, elastin, and fibronectin are well preserved after decellularization. From a mechanical point of view, Trypsin and Triton X-100 treated arteries show elastic modules and compliance comparable to native carotids, whereas the use of SDS makes samples stiffer, with a significant decrease in the compliance mean value and an increase in longitudinal and circumferential Young's modules. It is demonstrated that the treatment where Trypsin and Triton X-100 are combined guarantees complete decellularization of carotids, with no significant alteration of biomechanical and structural properties, thus preserving a suitable environment for adhesion, proliferation, and migration of cells.

The use of theranostic gadolinium-based nanoprobes to improve radiotherapy efficacy.

A new efficient type of gadolinium-based theranostic agent (AGuIX®) has recently been developed for MRI-guided radiotherapy (RT). These new particles consist of a polysiloxane network surrounded by a number of gadolinium chelates, usually 10. Owing to their small size (<5 nm), AGuIX typically exhibit biodistributions that are almost ideal for diagnostic and therapeutic purposes. For example, although a significant proportion of these particles accumulate in tumours, the remainder is rapidly eliminated by the renal route. In addition, in the absence of irradiation, the nanoparticles are well tolerated even at very high dose (10 times more than the dose used for mouse treatment). AGuIX particles have been proven to act as efficient radiosensitizers in a large variety of experimental in vitro scenarios, including different radioresistant cell lines, irradiation energies and radiation sources (sensitizing enhancement ratio ranging from 1.1 to 2.5). Pre-clinical studies have also demonstrated the impact of these particles on different heterotopic and orthotopic tumours, with both intratumoural or intravenous injection routes. A significant therapeutical effect has been observed in all contexts. Furthermore, MRI monitoring was proven to efficiently aid in determining a RT protocol and assessing tumour evolution following treatment. The usual theoretical models, based on energy attenuation and macroscopic dose enhancement, cannot account for all the results that have been obtained. Only theoretical models, which take into account the Auger electron cascades that occur between the different atoms constituting the particle and the related high radical concentrations in the vicinity of the particle, provide an explanation for the complex cell damage and death observed.

Impact of respiratory pattern on lung mechanics and interstitial proteoglycans in spontaneously breathing anaesthetized healthy rats.

AIM: The aim of this study was to investigate the effect of different pattern of spontaneous breathing on the respiratory mechanics and on the integrity of the pulmonary extracellular matrix. METHODS: Experiments were performed on adult healthy rats in which different spontaneously breathing pattern was elicited through administration of two commonly used anaesthetic mixtures: pentobarbital/urethane (P/U) and ketamine/medetomidine (K/M). The animals (five per group) were randomized and left to spontaneously breath for 10 min (P/U-sham; K/M-sham) or for 4h (P/U-4h; K/M-4h), targeting the anaesthesia level to obtain a tidal volume of about 8 mL kg(-1) body wt. At the end of the experiment, lung matrix integrity was assessed through determination of the glycosaminoglycans (GAGs) content in the lung parenchyma. RESULTS: Compared with K/M, anaesthesia with P/U cocktail induced: (1) a higher respiratory rate and minute ventilation attained with lower P(a) CO(2) ; (2) a higher pressure-time-product and work of breathing per minute; (3) a lower static lung compliance; (4) an increased activation of lung tissue metalloproteases; and (5) greater extraction of pulmonary interstitial GAGs. CONCLUSIONS: This study suggests that the breathing pattern induced by the different anaesthetic regimen may damage the pulmonary interstitium even during spontaneous breathing at physiological tidal volumes.