Integrating Polyoxometalates and Silver Clusters into Atomically Precise Molecular Heterojunction.

The Ag cluster-POM assemblies have been shown to possess interesting and potentially useful properties. However, there is no precedent example of atomically precise Ag cluster-POM assemblies showing heterojunction effects in photocatalysis. Herein, the synthesis and total structure determination of the periodically distributed molecular heterojunction [Ag12(SCy)6(CH3CN)12(PW12O40)]n (Ag12-PW12) are reported. The assembly of Ag/W clusters into 3D network can endow the resulting binary structure with an aesthetic topology and unique physicochemical properties. More remarkably, the incorporation of Ag12 cluster with PW12 can efficiently facilitate the separation of photogenerated electrons and holes, thus significantly promoting the catalytic efficiency in selective oxidation of sulfides. The Ag12-PW12 heterojunction can be recovered and reused five times with no drastic change in the catalytic performance. This research is expected to assist in the rational design of cluster-based heterojunction catalysts. The increase of catalytic activity of the Ag12-PW12 assembly in comparison with the unassembled Ag12 and PW12 clusters is attributed to the synergistic effect of Ag12 and PW12 clusters, offering the splendid opportunity for deciphering structure-reactivity relationship of heterostructure-coupled photosystem.

Efficacy comparison between iliosacral screw fixation of the posterior pelvic ring fracture with the assistance of modified percutaneous three-dimensional printing guide template and conventional fluoroscopy. / æ”¹è‰¯ç»çš®ä¸‰ç»´æ‰“å°å¯¼æ¿ä¸Žä¼ ç»Ÿé€è§†è¾ åŠ©éª¶é«‚èžºé’‰å›ºå®šéª¨ç›†åŽçŽ¯éª¨æŠ˜çš„ç–—æ•ˆæ¯”è¾ƒ.

OBJECTIVES: The effect of three-dimensional (3D) printed bone-attached guide plate assisted cannulated screw fixation of pelvic fracture is reliable, but extensive soft tissue dissection is still required when installing the guide plate. This study aims to compare the efficacy of posterior pelvic ring fracture fixation with iliosacral screw insertion between the assistance of modified percutaneous patient specific 3D printed guide template and conventional fluoroscopy. METHODS: From May, 2019 and September 2021, 28 patients sustained posterior pelvic ring fractures were randomized into 2 groups: A guide template group, in which the iliosacral screw was inserted for fixation of the posterior pelvic ring fracture with the assistance of modified percutaneous patient specific 3D printed guide template, and a fluoroscopy group, in which the iliosacral screw was inserted under the guidance of conventional fluoroscopy. The operation time, fluoroscopic frequency, intraoperative blood loss, and incision length were recorded for each screw insertion. Fracture reduction was evaluated according to the Matta criteria. The screw position was evaluated according to the modified Gras classification, and the functional outcome was evaluated according to Majeed score. The parameters of both groups were compared, and statistical analysis was performed. RESULTS: All the 28 patients were followed up for 12-24 months. Of them, 15 iliosacral screws were inserted in 14 patients in the guide template group, and 14 iliosacral screws were inserted in 14 patients in the fluoroscopy group. The operation time, fluoroscopic frequency, screw deviation, incision length, and blood loss in the guide template group were 20-30(25.8±2.8) min, 9-15(12.2±1.9), 2-4(2.6±0.7) mm, 4-5(4.6±0.5) cm, and 5-10 (7.8±1.7) mL, respectively, whereas those in the fluoroscopy group were 30-60(48.1±7.5) min, 40-96(64.7±16.3), 3-6(4.2±0.9) mm, 0.8-1.2(1.0±0.1) cm, and 2-5(3.1±1.3) mL, respectively, and there were statistical significance (all P<0.001). Fracture reduction was evaluated according to the Matta criteria, and all the patients reached excellence and good (P=0.584) in the 2 groups. According to modified Gras classification, there were 12 Grade I screws, 3 Grade II screws, and 0 Grade III screws in the guide template group, and 10 Grade I screws, 3 Grade II screws, and 1 Grade III screw in the fluoroscopy group, with no statistical significance (P=0.334). The functional outcome was evaluated according to Majeed score at the last follow-up, without significant difference between the guide template group and the fluoroscopy group (P=0.908). CONCLUSIONS: Compared with the conventional fluoroscopy, it would cost less operation time, less fluoroscopic frequency and increase more accurate screw insertion to fixate the posterior pelvic ring fracture with the assistance of modified percutaneous patient specific 3D printed guide template.

ConceptThread: Visualizing Threaded Concepts in MOOC Videos.

Massive Open Online Courses (MOOCs) platforms are becoming increasingly popular in recent years. Online learners need to watch the whole course video on MOOC platforms to learn the underlying new knowledge, which is often tedious and time-consuming due to the lack of a quick overview of the covered knowledge and their structures. In this paper, we propose ConceptThread, a visual analytics approach to effectively show the concepts and the relations among them to facilitate effective online learning. Specifically, given that the majority of MOOC videos contain slides, we first leverage video processing and speech analysis techniques, including shot recognition, speech recognition and topic modeling, to extract core knowledge concepts and construct the hierarchical and temporal relations among them. Then, by using a metaphor of thread, we present a novel visualization to intuitively display the concepts based on video sequential flow, and enable learners to perform interactive visual exploration of concepts. We conducted a quantitative study, two case studies, and a user study to extensively evaluate ConceptThread. The results demonstrate the effectiveness and usability of ConceptThread in providing online learners with a quick understanding of the knowledge content of MOOC videos.

[Etiology of acute respiratory tract infection in hospitalized children in Suzhou from 2005 to 2011].

OBJECTIVE: To elucidate the etiology of acute respiratory tract infection (ARI) in hospitalized children in Suzhou from 2005 to 2011. METHODS: A total of 10 243 hospitalized children with ARI in Children's Hospital Affiliated to Soochow University from September 2005 to October 2011 were enrolled in the study. The clinical information was collected; and the nasopharyngeal aspiration fluid and serum samples were sent for multi-pathogen detection. Respiratory syncytial virus (RSV), influenza virus type A and B (IV-A, IV-B), parainfluenza virus type 1-3 (PIV-1-PIV-3) and adenovirus (ADV) were detected by direct immunofluorescence assay. Human bocavirus (HBoV), mycoplasma pneumoniae (MP) and chlamydia pneumoniae (CP) were detected by fluorescent quantitative PCR while human metapneumovirus (hMPV) was detected by reverse transcription PCR (RT-PCR). Sputum culture was applied to detect bacterial infection and quantitative ELISA was adopted to detect the specific antibodies of MP and CP. The results of the above detections were analyzed, and thereby to explore the prevalent pathogens among different aging children and the seasonal distribution and characteristics of the disease. RESULTS: At least one type of pathogen was detected in 5871 out of 10 243 hospitalized children and the overall positive rate was 57.32%; including 3326 virus samples with positive rate at 32.47% (3326/10 243), 2870 bacteria samples with positive rate at 28.02% (2870/10 243) and 2759 atypical pathogen samples,with positive rate at 26.94% (2759/10 243). MP was the most common pathogen,whose detected rate was 25.74% (2637/10 243). The median age of children with RSV (6 months) or PIV-3(8 months) infection was younger than the median age of all hospitalized children (12 months) (χ(2) = 380.992, 34.826, P < 0.05). While the median age of children with ADV (42 months), HBoV (14 months) or IV-A (24 months) infection was older than it of all hospitalized children (χ(2) = 83.583, 13.169, 18.012, P < 0.05). The median age of children with MP (30 months),streptococcus pneumoniae (17 months) or haemophilus parainfluenzae (21 months) infection was older than it of all hospitalized children (χ(2) = 728.299, 60.463, 8.803, P < 0.05). The detected rate of RSV in the groups of children aging less than 6 months, 7-12 months, 2-3 years, 4-5 years and over 6 years was separately 25.59% (840/3283), 17.05% (333/1953), 11.85% (310/2615), 6.68% (90/1347), and 2.87% (30/1045); which decreased while the age grew (χ(2) = 178.46, P < 0.01). Conversely, the positive rate of MP increased with the age growing (χ(2) = 379.21, P < 0.01). The rate in the above groups was 8.25% (271/3283), 19.46% (380/1953), 33.00% (863/2615), 41.43% (558/1347), 54.07% (565/1045), respectively. RSV and IV-A were prevalent in winter, whose detected rates were 35.73% (941/2634) and 4.44% (117/2634) respectively.hMPV infection was common in spring, with the detected rate at 10.55% (278/2634); while HBoV infection was common in summer and autumn, with the positive rate at 9.99% (149/1491) and 9.71% (98/1009). MP and CP were frequently detected in summer, up to 31.27% (819/2619) and 10.07% (43/427) respectively. RSV was the most common pathogen in bronchiolitis (33.27% (866/2603)) and MP was the most common pathogen in bronchopneumonia (26.05% (1152/4422)) and lober pneumonia (52.25% (267/511)). CONCLUSION: MP and RSV were the most common pathogens in respiratory tract infection in hospitalized children. The novel virus included hMPV and HBoV, which also played an important role in ARI. Different pathogens were prevalent in different ages; with respective seasonal distribution and characteristics.

Case Report: Successful treatment of advanced hepatocarcinoma with the PD-1 inhibitor Camrelizumab.

Primary liver cancer is characterized by closely related with chronic liver inflammation, thereby reversing hypoxic immunosuppressive microenvironment of tumor cell growth by immunotherapy drug is a potentially effective strategy. Camrelizumab is an anti-PD-1 antibody being developed by Jiangsu Hengrui Pharmaceuticals Co., Ltd. We reported a case of an adult critical Chinese patient with primary hepatocellular carcinoma and lung metastasis completely responding to Camrelizumab, most of the lesions were stable and no new lesions occurred after 1-year treatment, which provides us to reconsider the therapeutic effect of Camrelizumab on such patients. Camrelizumab had a safety profile for the patient in our case report, except for the occurrence of RCCEP. This case provides the evidence of the effective antitumor activity and manageable toxicities of Camrelizumab for patients with advanced hepatocellular carcinoma, which was the first application as far as we know.

WNT ligands in non-small cell lung cancer: from pathogenesis to clinical practice.

Non-small cell lung cancer (NSCLC) is the malignant tumor with the highest morbidity and leading cause of death worldwide, whereas its pathogenesis has not been fully elucidated. Although mutations in some crucial genes in WNT pathways such as ß-catenin and APC are not common in NSCLC, the abnormal signal transduction of WNT pathways is still closely related to the occurrence and progression of NSCLC. WNT ligands (WNTs) are a class of secreted glycoproteins that activate WNT pathways through binding to their receptors and play important regulatory roles in embryonic development, cell differentiation, and tissue regeneration. Therefore, the abnormal expression or dysfunction of WNTs undoubtedly affects WNT pathways and thus participates in the pathogenesis of diseases. There are 19 members of human WNTs, WNT1, WNT2, WNT2b, WNT3, WNT3a, WNT4, WNT5a, WNT5b, WNT6, WNT7a, WNT7b, WNT8a, WNT8b, WNT9a, WNT9b, WNT10a, WNT10b, WNT11 and WNT16. The expression levels of WNTs, binding receptors, and activated WNT pathways are diverse in different tissue types, which endows the complexity of WNT pathways and multifarious biological effects. Although abundant studies have reported the role of WNTs in the pathogenesis of NSCLC, it still needs further study as therapeutic targets for lung cancer. This review will systematically summarize current research on human WNTs in NSCLC, from molecular pathogenesis to potential clinical practice.

Iliosacral screw fixation of pelvic ring disruption with tridimensional patient-specific template guidance.

INTRODUCTION: Posterior pelvic ring disruption includes sacral fractures, sacroiliac joint fracture dislocations and ilium fractures. Percutaneous iliosacral screw fixation of sacral fractures and sacraoiliac joint fracture dislocations have been prevailing, it has the advantages of minimal invasiveness, less blood loss and low wound infection rate. HYPOTHESIS: This study was to evaluate the application of three-dimensional (3D) printed patient-specific guide template in closed reduction and iliosacral screw fixation of posterior pelvic ring disruption. MATERIAL AND METHODS: The data of patients, who were treated with closed reduction and iliosacral screw fixation of posterior pelvic ring disruption with the assistance of 3D printed guide template from December 2014 to September 2018, were collected. The screw placement time, fluoroscopy time, intraoperative blood loss, fracture reduction, screw position, and functional assessment were recorded. RESULTS: There were 17 cases of unstable pelvic fractures,and 20 screws were inserted for fixation of sacral fractures or sacroiliac joint dislocations, with bilateral screw placement in 3 cases. The average time for each screw placement was 45.9±8.6min (30-60min). The average fluoroscopy time for each screw insertion was 50.3±19.7s (24-96 s). The mean blood loss for each screw placement was 32.0±11.1ml (20-50ml). According to Matta scale, the fracture reduction was graded as excellent in all the 17 cases. According to the modified Gras classification, the 3D CT reconstruction of the pelvis demonstrated Grade 1 for 18 screws and Grade 2 for 2 screw. Functional outcome 1 year postoperatively was rated as 15 excellent and 2 good, according to the Majeed functional scale. DISCUSSION: It is feasible and safe to stabilize the posterior pelvic ring disruption using iliosacral screw fixation under assistance of the 3D printed guide template. It could reduce fluoroscopy time, screw placement time and intraoperative blood loss and achieve good postoperative recovery. LEVEL OF PROOF: IV; Retrospective study.

The effect of different diagnostic timings and types of placenta accreta on the pregnancy outcome.

OBJECTIVES: To explore the effects of maternal and fetal outcomes after different diagnostic timings of placenta accreta and its types. METHODS: We retrospectively collected the clinical information of 1178 pregnant women with placenta accreta in Fujian Maternity and Children Health Hospital from January 2012 to January 2017. According to the different diagnostic timings of placenta accreta, they were divided into groups of prenatal diagnosis and postpartum diagnosis; and according to the types of placenta accreta, they were divided into groups of accreta group, increta group, and percreta group. RESULTS: 1. Women with antenatal diagnosis more often had placenta previa and history of previous cesarean section. 2. Women with antenatal diagnosis had a higher rate in blood loss and blood transfusion. 3. The rate of blood loss, blood transfusion, infection,disseminated intravascular coagulation (DIC), secondary laparotomy, hysterectomy had statistically significant differences (P < 0.05) in different types of placenta accreta. The deeper of placenta accreta, the higher the incidence of complications. CONCLUSION: It is important to pay attention for risk factors of the placenta accreta, then improve prenatal diagnostic rate of the placenta accreta and its types, which can forecast the severity of illness to improve maternal and fetal outcomes.

Patient-specific instrumentation combined with a new tool for gap balancing is useful in total knee replacement: a 3-year follow-up of a retrospective study.

OBJECTIVE: The purpose of this study was to determine whether the gap-balancing technique with patient-specific instrumentation (PSI) and a new balancing device in total knee arthroplasty (TKA) can improve knee function to a greater extent than can the measured resection technique. MATERIALS AND METHODS: Data from 150 patients who underwent TKA from August 2014 to June 2016 were studied retrospectively. The gap-balancing technique assisted by PSI and the new balancing device was used in 80 patients (82 knees), and the measured resection technique was used in 70 patients (70 knees). The surgical, imaging, and knee function data were compared. RESULTS: The gap-balancing technique assisted by PSI and the new balancing device was found to be feasible in all operated knees and reliable. In total, 150 patients (152 knees) of ages ranging from 52 to 78 years (mean 67 years) underwent TKA during the study period. The follow-up period ranged from 35 to 52 months (mean 45 months). Only one patient, who was included in the gap-balancing group, underwent a revision surgery at 2 years postoperatively due to infection. There were no differences in the incidence of anterior knee pain between the two groups. The mean flexion angle, KSS scores, and VAS scores did not significantly differ between the measured resection group and gap-balancing group at 12 weeks or 36 weeks postoperatively. The average joint line displacement was 1.3 ± 1.1 mm (range 0-3) proximally in the GB (gap-balancing) group and 1.2 ± 1.4 mm in the MR (measured-resection) group. No outliers >5 mm in either group were recorded. The mean leg axis deviation from the neutral mechanical axis was 1.8°±1.5° varus (range 0°-3°varus) versus the neutral mechanical axis in the GB group and 1.4°±1.2°(range 0°-3°)in the MR group. No outliers with >3° deviation in either group were recorded. CONCLUSIONS: The gap-balancing technique performed with the new balancing device and PSI can yield accurate femoral component alignment as well as outcomes similar to those of measured resection at 3 years. The new balancing device can be taken into consideration by surgeons who prefer performing the gap-balancing technique with PSI.

Context-aware Sampling of Large Networks via Graph Representation Learning.

Numerous sampling strategies have been proposed to simplify large-scale networks for highly readable visualizations. It is of great challenge to preserve contextual structures formed by nodes and edges with tight relationships in a sampled graph, because they are easily overlooked during the process of sampling due to their irregular distribution and immunity to scale. In this paper, a new graph sampling method is proposed oriented to the preservation of contextual structures. We first utilize a graph representation learning (GRL) model to transform nodes into vectors so that the contextual structures in a network can be effectively extracted and organized. Then, we propose a multi-objective blue noise sampling model to select a subset of nodes in the vectorized space to preserve contextual structures with the retention of relative data and cluster densities in addition to those features of significance, such as bridging nodes and graph connections. We also design a set of visual interfaces enabling users to interactively conduct context-aware sampling, visually compare results with various sampling strategies, and deeply explore large networks. Case studies and quantitative comparisons based on real-world datasets have demonstrated the effectiveness of our method in the abstraction and exploration of large networks.

[Treatment of unstable pelvic fractures by cannulated screw internal fixation with the assistance of three-dimensional printing insertion template].

Objective: To evaluate the effectiveness of unstable pelvic fractures treated by cannulated screw internal fixation with the assistance of three-dimensional (3D) printing insertion template. Methods: The clinical data of 10 patients who underwent surgical treatment for unstable pelvic fractures by cannulated screw internal fixation with the assistance of 3D printing insertion template between May 2015 and June 2016 were retrospectively analysed. There were 7 males and 3 females with an average age of 37.5 years (range, 20-58 years). The causes of injury included falling from height in 5 cases, crushing from heavy load in 1 case, and traffic accidents in 4 cases. The interval from injury to admission was 1-5 hours (mean, 3.1 hours). The fracture situation included 6 cases of sacral fracture, 1 case of right sacroiliac joint dislocation, and 3 cases of iliac bone fracture. There were 10 cases of superior and inferior pubic rami fracture, including 3 cases on the left side (2 cases of suprapubic fracture adjacent to symphysis pubis), 2 cases on the right side, and 5 cases on the bilateral. All fractures were classified according to the Tile system, there were 4 cases of type B2, 1 of type B3, 4 of type C1, and 1 of type C2. The radiological outcome was evaluated by Matta scale, and the positions of the iliosacral screw and superior pubic ramus screw were evaluated according to 3D reconstruction of CT postoperatively. The functional outcome was evaluated by Majeed function scale. Results: The average time of each screw implantation was 30 minutes, and the average blood loss per screw incision was 50 mL. The time of implantation of each sacroiliac screw was 24-96 seconds (mean, 62 seconds), and the time of implantation of each suprapubic screw was 42-80 seconds (mean, 63.2 seconds). The hospitalization duration was 17-90 days (mean, 43.7 days). All incisions healed by first intention. All patients were followed up 12-22 months (mean, 15.6 months). The radiological outcome was excellent in 8 cases and good in 2 cases according to Matta scale; and 3D reconstruction of CT demonstrated that all the 9 iliosacral screws were placed as type Ⅰ, and all the 13 suprapubic ramus screws were placed as grade 0 on the first postoperative day. No complication such as neurovascular injury, screw back out or rupture, or secondary fracture displacement was observed during the follow-up. At 6 months after operation, the X-ray films showed good fracture healing in all the 10 patients. The functional outcome was excellent in 9 cases and good in 1 case according to Majeed scale at 1 year after operation. One patient sustained Tile C2 pelvic disruption complicated with L 5 nerve root injury achieved complete nervous functional recovery at last follow-up. Conclusion: It has advantages of precise screw insertion and lower risk of neurovascular injury to treat unstable pelvic fractures by cannulated screw internal fixation with the assistance of 3D printing insertion template, which can be a good alternative for the treatment of unstable pelvic fractures.

Emergency obstetric hysterectomy for life-threatening postpartum hemorrhage: A 12-year review.

The aim of the study was to review the operative experiences of emergency hysterectomy for life-threatening postpartum hemorrhage (PPH) performed over a 12-year period at Fujian Provincial Maternity and Children's Hospital; to examine the incidence and risk factors for emergency obstetric hysterectomy; and to evaluate the curative effectiveness and safety of subtotal hysterectomy for life-threatening PPH.The records of all cases of emergency obstetric hysterectomy performed at Fujian Maternity and Children Health Hospital between January 2004 and June 2016 were analyzed. The incidence, risk factors, and outcomes of hysterectomy, the peripartum complications, and the coagulation function indices were evaluated.A total of 152,023 of women were delivered. The incidence of emergency postpartum hysterectomy was 0.63 per 1000 deliveries: 96 patients underwent hysterectomy for uncontrolled PPH, 19 (0.207‰) underwent hysterectomy following vaginal delivery, and 77 (1.28‰) underwent the procedure following cesarean delivery (P < .001). Common risk factors included postpartum prothrombin activity ≤ 50% (61.5%), placenta accreta (43.76%), uterine atony (37.5%), uterine rupture (17.5%), and grand multiparity > 6 (32.3%). Forty-one patients underwent subtotal abdominal hysterectomy (STH) and 55 patients underwent total abdominal hysterectomy (TH). The mean operation time was significantly shorter for TH (193.59 ±â€Š83.41 minutes) than for STH (142.86 ±â€Š78.32 minutes; P = .002). The mean blood loss was significantly greater for TH (6832 ±â€Š787 mL) than for STH (6329 ±â€Š893 mL; P = .003). The mean number of red cell units transfusion was higher during TH (16.24 ±â€Š9.48 units vs 12.43 ±â€Š7.2, respectively; P = .047). Postoperative prothrombin activity was significantly higher than preoperative levels (56.84 ±â€Š14.74 vs 44.39 ±â€Š15.69, respectively; P < .001) in women who underwent TH and in those who underwent STH (57.63 ±â€Š15.68 vs 47.87 ±â€Š12.86, respectively; P < .001). There was no significant difference in the maternal complications after TH or STH for PPH.Cesarean deliveries were associated with an increased risk of emergency hysterectomy, and postpartum prothrombin activity < 50% was the greatest risk factor for hysterectomy in most women who underwent hysterectomy. STH was the preferred procedure for emergency obstetric hysterectomy.

The accuracy and the safety of individualized 3D printing screws insertion templates for cervical screw insertion.

STUDY DESIGN: Clinical trial for cervical screw insertion by using individualized 3-dimensional (3D) printing screw insertion templates device. OBJECTIVE: The objective of this study is to evaluate the safety and accuracy of the individualized 3D printing screw insertion template in the cervical spine. MATERIALS AND METHODS: Ten patients who underwent posterior cervical fusion surgery with cervical pedicle screws, laminar screws or lateral mass screws between December 2014 and December 2015 were involved in this study. The patients were examined by CT scan before operation. The individualized 3D printing templates were made with photosensitive resin by a 3D printing system to ensure the screw shafts entered the vertebral body without breaking the pedicle or lamina cortex. The templates were sterilized by a plasma sterilizer and used during the operation. The accuracy and the safety of the templates were evaluated by CT scans at the screw insertion levels after operation. RESULTS: The accuracy of this patient-specific template technique was demonstrated. Only one screw axis greatly deviated from the planned track and breached the cortex of the pedicle because the template was split by rough handling and then we inserted the screws under the fluoroscopy. The remaining screws were inserted in the track as preoperative design and the screw axis deviated by less than 2 mm. Vascular or neurologic complications or injuries did not happen. And no infection, broken nails, fracture of bone structure, or screw pullout occurred. CONCLUSION: This study verified the safety and the accuracy of the individualized 3D printing screw insertion templates in the cervical spine as a kind of intraoperative screw navigation. This individualized 3D printing screw insertion template was user-friendly, moderate cost, and enabled a radiation-free cervical screw insertion.

[Value of Glasgow prognostic score in patients with adenocarcinoma of esophagogastric junction].

OBJECTIVE: To evaluate the prognosis and predictive values of preoperative Glasgow prognostic score (GPS) for adenocarcinoma of esophagogastric junction(AEG) patients. METHODS: A retrospective study of 322 AEG patients who received operation between January 2007 and March 2010 in Henan Provincial People's Hospital was performed. Clinical data, pathological characteristics, laboratory parameters and survival data were collected. The GPS was calculated based on C-reactive protein(CRP) and serum albumin(ALB) levels. Univariate and multivariate analysis were used to evaluate the prognostic value of GPS. RESULTS: Among 322 patients, 0, 1, 2 of GPS were 192, 104 and 26 patients respectively. The median follow-up was 37 (4-73) months. In Kaplan-Meier analysis, median diseases-free survival (DFS) of GPS 0, 1, 2 was 47.0 (95% CI: 31.6-62.4), 15.0 (95% CI: 11.8-8.2) and 4.7 (95% CI: 3.8-5.6) months (P<0.01), and median overall survival (OS) was out of reach, 20.6 (95% CI: 15.8-25.4) and 7.0 (95% CI: 5.8-8.2) months (P<0.01). Univariate and multivariate analysis revealed that GPS was an independent predictor of DFS (P<0.01) and OS (P<0.01) of AEG. CONCLUSION: GPS is an effective predictor of survival in AEG.

[Determination of linderane in root tuber of Lindera aggregata by HPLC].

OBJECTIVE: To provide scientific basis for quality control of Lindera aggregata. METHOD: HPLC analytical method was established using a Lichrospher C18 column and acetonitrile-water (56:44) as the mobile phase, detected at 235 nm. RESULT: The linear range of linderane is between 0.0642 - 0.5774 microg, the average recovery was 98.4%, RSD1.7% (n = 9). CONCLUSION: Contents of linderane in commercially available and collected samples were from 0.028% to 0.123% and from 0.056% to 0.222% respectively.