RESUMO
PURPOSE: To calculate the dose distribution using Monte Carlo simulations for a novel high-dose-rate Yttrium-90 (Y-90) disc source recently developed for episcleral brachytherapy and provide a lookup table for treatment planning. METHODS: Monte Carlo simulations were performed to calculate the in-water dose distribution of the Y-90 disc source using the "GATE", a software based on the "Geant4" Monte Carlo simulation toolkit developed by the international OpenGATE collaboration. The geometry of this novel beta source, its capsule, and the surrounding water medium were accurately modeled in the simulation input files. The standard Y-90 element beta spectrum from ICRU 72 was used, and the physics processes for beta and photon interactions with matters were all included. The dose distribution of this Y-90 disc source was measured in a separate study using Gafchromic EBT-3 films and the results were reported elsewhere. To match the setup of the experiment, a Gafchromic EBT-3 film was also included in the simulation geometry. The simulated dose profiles were exported from the 3D dose distribution results and compared with the measured dose profiles. Transverse dose profiles at different distances from the seed surface were also obtained to study the lateral coverage of the source. RESULTS: The measured percent depth dose (PDD) curves along the central axis perpendicular to the surface of the Y-90 disc were constructed from the experimental and simulated data, and normalized to the reference point at 1 mm from the source capsule. Both PDD curves agreed well up to 4 mm from the source surface (maximum difference ± 10%) but deviated from each other beyond 4 mm. The deviation might be caused by the increased measurement uncertainty in the low-dose region. The dose rate at the reference point calculated from the Monte Carlo simulation was 1.09 cGy/mCi-s and agreed very well with the measured dose rate of 1.05 cGy/mCi-s. If the 80% isodose line is selected as the lateral coverage, the lateral dose coverage is maximal (â¼4.5 mm) at the plane next to the source surface, and gradually decreases with the increasing distance, approaching 3.5 mm when the plane is 5 mm from the 6-mm diameter source surface. CONCLUSION: Monte Carlo simulations were successfully performed to confirm the measured PDD curve of the novel Y-90 disc source. This simulation work laid a solid foundation for characterizing the full dosimetry parameters of this source for episcleral brachytherapy applications.
Assuntos
Braquiterapia , Humanos , Braquiterapia/métodos , Radioisótopos de Ítrio/uso terapêutico , Método de Monte Carlo , Radiometria/métodos , Água , Dosagem RadioterapêuticaRESUMO
This study aimed to evaluate rectal dose reduction in prostate cancer patients who underwent a combination of volumetric modulated arc therapy (VMAT) and low-dose-rate (LDR) brachytherapy with insertion of hydrogel spacer (SpaceOAR). For this study, 35 patients receiving hydrogel spacer and 30 patients receiving no spacer were retrospectively enrolled. Patient was treated to doses of 45 Gy to the primary tumor site and nodal regions over 25 fractions using VMAT and 100 Gy to the prostate using prostate seed implant (PSI). In VMAT plans of patients with no spacer, mean doses of rectal wall were 43.6, 42.4, 40.1, and 28.8 Gy to the volume of 0.5, 1, 2, and 5 cm3 , respectively. In patients with SpaceOAR, average rectal wall doses decreased to 39.0, 36.9, 33.5, and 23.9 Gy to the volume of 0.5, 1, 2, and 5 cm3 , respectively (p < 0.01). In PSI plans, rectal wall doses were on average 78.5, 60.9, 41.8, and 14.8 Gy to the volume of 0.5, 1, 2, and 5 cm3 , respectively, in patients without spacer. In contrast, the doses decreased to 34.5, 28.4, 20.6 (p < 0.01), and 8.5 Gy (p < 0.05) to rectal wall volume of 0.5, 1, 2, and 5 cm3 , respectively, in patient with SpaceOAR. To demonstrate rectal sum dose sparing, dose-biological effective dose (BED) calculation was accomplished in those patients who showed >60% overlap of rectal volumetric doses between VMAT and PSI. In patients with SpaceOAR, average BEDsum was decreased up to 34%, which was 90.1, 78.9, 65.9, and 40.8 Gy to rectal volume of 0.5, 1, 2, and 5 cm3 , respectively, in comparison to 137.4, 116.7, 93.0, and 50.2 Gy to the volume of 0.5, 1, 2, and 5 cm3 , respectively, in those with no spacer. Our result suggested a significant reduction of rectal doses in those patients who underwent a combination of VMAT and LDR with hydrogel spacer placement.
Assuntos
Neoplasias da Próstata , Radioterapia de Intensidade Modulada , Humanos , Hidrogéis , Masculino , Neoplasias da Próstata/patologia , Neoplasias da Próstata/radioterapia , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador , Reto , Estudos RetrospectivosRESUMO
Plan checks are important components of a robust quality assurance (QA) program. Recently, the American Association of Physicists in Medicine (AAPM) published two reports concerning plan and chart checking, Task Group (TG) 275 and Medical Physics Practice Guideline (MPPG) 11.A. The purpose of the current study was to crosswalk initial plan check failure modes revealed in TG 275 against our institutional QA program and local incident reporting data. Ten physicists reviewed 46 high-risk failure modes reported in Table S1.A.i of the TG 275 report. The committee identified steps in our planning process which sufficiently checked each failure mode. Failure modes that were not covered were noted for follow-up. A multidisciplinary committee reviewed the narratives of 1599 locally-reported incidents in our Radiation Oncology Incident Learning System (ROILS) database and categorized each into the high-risk TG 275 failure modes. We found that over half of the 46 high-risk failure modes, six of which were top-ten failure modes, were covered in part by daily contouring peer-review rounds, upstream of the traditional initial plan check. Five failure modes were not adequately covered, three of which concerned pregnancy, pacemakers, and prior dose. Of the 1599 incidents analyzed, 710 were germane to the initial plan check, 23.4% of which concerned missing pregnancy attestations. Most, however, were caught prior to CT simulation (98.8%). Physics review and initial plan check were the least efficacious checks, with error detection rates of 31.8% and 31.3%, respectively, for some failure modes. Our QA process that includes daily contouring rounds resulted in increased upstream error detection. This work has led to several initiatives in the department, including increased automation and enhancement of several policies and procedures. With TG 275 and MPPG 11.A as a guide, we strongly recommend that departments consider an internal chart checking policy and procedure review.
Assuntos
Radioterapia (Especialidade) , Planejamento da Radioterapia Assistida por Computador , Automação , Humanos , Física , Planejamento da Radioterapia Assistida por Computador/métodos , Gestão de Riscos/métodosRESUMO
OBJECTIVE: The purpose of this study is to report on safety, short-term and long-term clinical efficacy following intracoronary brachytherapy (ICBT) for restenosis (ISR) in patients with drug eluting stents (DES). BACKGROUND: ICBT is an effective treatment for ISR of bare metal stents (BMS) but its utilization has waned due to the advent of DES. ISR following DES occurs at a frequency of 8% or greater. METHOD: A retrospective analysis was performed on patients treated on an institutional review board (IRB) approved protocol using ICBT for DES ISR between January 2011 and October 2016. All patients were followed for 24 months for procedural complications, mortality, clinical ISR/target lesion revascularization (TLR) and stroke. RESULTS: A total of 290 patients were identified with a mean age of 66.6 years. All of them had high rates of typical coronary artery disease risk factors. Our primary outcome, composite of in-hospital mortality, myocardial infarction (MI), safety outcomes and procedural failure was noted in 1(0.3%) patient who had a MI. No other secondary outcome was noted in-hospital. At 1-year follow up, 12.4% patients had ISR, 1.7% patients died, and 1 (0.3%) had ischemic stroke. At 2-year, 14.7% had ISR, and total 6 (2.1%) patients had MI. CONCLUSION: ICBT demonstrates excellent technical success rates for treatment, safety, and reasonable efficacy over 2-years to be free from recurrent clinical ISR. This study represents the largest ICBT data for DES ISR to date among very complex lesion subsets, however, more prospective data will be needed to determine the optimal patient for treatment.
Assuntos
Braquiterapia , Reestenose Coronária , Stents Farmacológicos , Braquiterapia/efeitos adversos , Reestenose Coronária/diagnóstico por imagem , Reestenose Coronária/etiologia , Reestenose Coronária/terapia , Humanos , Estudos Prospectivos , Estudos Retrospectivos , Fatores de Risco , Stents , Resultado do TratamentoRESUMO
The SARS-CoV-2 coronavirus pandemic has spread around the world including the United States. New York State has been hardest hit by the virus with over 380 000 citizens with confirmed COVID-19, the illness associated with the SARS-CoV-2 virus. At our institution, the medical physics and dosimetry group developed a pandemic preparedness plan to ensure continued operation of our service. Actions taken included launching remote access to clinical systems for all dosimetrists and physicists, establishing lines of communication among staff members, and altering coverage schedules to limit on-site presence and decrease risk of infection. The preparedness plan was activated March 23, 2020, and data were collected on treatment planning and chart checking efficiency for 6 weeks. External beam patient load decreased by 25% during the COVID-19 crisis, and special procedures were almost entirely eliminated excepting urgent stereotactic radiosurgery or brachytherapy. Efficiency of treatment planning and chart checking was slightly better than a comparable 6-week interval in 2019. This is most likely due to decreased patient load: Fewer plans to generate and more physicists available for checking without special procedure coverage. Physicists and dosimetrists completed a survey about their experience during the crisis and responded positively about the preparedness plan and their altered work arrangements, though technical problems and connectivity issues made the transition to remote work difficult. Overall, the medical physics and dosimetry group successfully maintained high-quality, efficient care while minimizing risk to the staff by minimizing on-site presence. Currently, the number of COVID-19 cases in our area is decreasing, but the preparedness plan has demonstrated efficacy, and we will be ready to activate the plan should COVID-19 return or an unknown virus manifest in the future.
Assuntos
Betacoronavirus/isolamento & purificação , Defesa Civil/organização & administração , Infecções por Coronavirus/epidemiologia , Física Médica/organização & administração , Pneumonia Viral/epidemiologia , Guias de Prática Clínica como Assunto/normas , Garantia da Qualidade dos Cuidados de Saúde , Radiometria/métodos , COVID-19 , Defesa Civil/normas , Infecções por Coronavirus/terapia , Infecções por Coronavirus/virologia , Física Médica/normas , Humanos , Pandemias , Pneumonia Viral/terapia , Pneumonia Viral/virologia , Fatores de Risco , SARS-CoV-2 , Estados Unidos/epidemiologiaRESUMO
Objective To improve the efficiency of frame-based and frameless Gamma Knife® Icon™ (GKI) treatments by analyzing the workflows of both treatment approaches and identifying steps that lead to prolonged patient in-clinic or treatment time. Methods The treatment processes of 57 GKI patients, 16 frame-based and 41 frameless cases were recorded and analyzed. For frame-based treatments, time points were recorded for various steps in the process, including check-in, magnetic resonance imaging (MRI) completion, plan approval, and treatment start/end times. The time required for completing each step was calculated and investigated. For frameless treatments, the actual and planned treatment times were compared to evaluate the patient tolerance of the treatment. In addition, the time spent on room cleaning and preparation between treatments was also recorded and analyzed. Results For frame-based cases, the average in-clinic time was 6.3 hours (ranging from 4 to 8.7 hours). The average time from patient check-in to plan approval was 4.2 hours (ranging from 2.8 to 5.5 hours), during which the frame was placed, stereotactic reference MRI images were taken, target volumes were contoured, and the treatment plan was developed and second-checked. For patients immobilized with a mask, treatment pauses triggered by the intra-fractional motion monitoring system resulted in a significantly longer actual treatment time than the planned time. In 50 (or 55%) of the 91 frameless treatments, the patient on-table time was longer than the planned treatment time by more than 10 minutes, and in 19 (or 21%) of the treatments the time difference was larger than 20 minutes. Major treatment interruptions, defined as pauses leading to a longer than 10-minute delay, were more commonly encountered in patients with a planned treatment time longer than 40 minutes, which accounted for 64% of the recorded major interruptions. Conclusion For frame-based cases, the multiple pretreatment steps (from patient check-in to plan approval) in the workflow were time-consuming and resulted in prolonged patient in-clinic time. These pretreatment steps may be shortened by performing some of these steps before the treatment day, e.g., pre-planning the treatment using diagnostic MRI scans acquired a few days earlier. For frameless patients, we found that a longer planned treatment time is associated with a higher chance of treatment interruption. For patients with a long treatment time, a planned break or consideration of fractionated treatments (i.e., 3 to 5 fractionated stereotactic radiosurgery) may optimize the workflow and improve patient satisfaction.
RESUMO
DNA methylation has become one of the most useful biomarkers for age prediction and body fluid identification in the forensic field. Therefore, several assays have been developed to detect age-associated and body fluid-specific DNA methylation changes. Among the many methods developed, SNaPshot-based assays should be particularly useful in forensic laboratories, as they permit multiplex analysis and use the same capillary electrophoresis instrumentation as STR analysis. However, technical validation of any developed assays is crucial for their proper integration into routine forensic workflow. In the present collaborative exercise, two SNaPshot multiplex assays for age prediction and a SNaPshot multiplex for body fluid identification were tested in twelve laboratories. The experimental set-up of the exercise was designed to reflect the entire workflow of SNaPshot-based methylation analysis and involved four increasingly complex tasks designed to detect potential factors influencing methylation measurements. The results of body fluid identification from each laboratory provided sufficient information to determine appropriate age prediction methods in subsequent analysis. In age prediction, systematic measurement differences resulting from the type of genetic analyzer used were identified as the biggest cause of DNA methylation variation between laboratories. Also, the use of a buffer that ensures a high ratio of specific to non-specific primer binding resulted in changes in DNA methylation measurement, especially when using degenerate primers in the PCR reaction. In addition, high input volumes of bisulfite-converted DNA often caused PCR failure, presumably due to carry-over of PCR inhibitors from the bisulfite conversion reaction. The proficiency of the analysts and experimental conditions for efficient SNaPshot reactions were also important for consistent DNA methylation measurement. Several bisulfite conversion kits were used for this study, but differences resulting from the use of any specific kit were not clearly discerned. Even when different experimental settings were used in each laboratory, a positive outcome of the study was a mean absolute age prediction error amongst participant's data of only 2.7 years for semen, 5.0 years for blood and 3.8 years for saliva.
Assuntos
Líquidos Corporais , Metilação de DNA , Pré-Escolar , Ilhas de CpG/genética , Genética Forense/métodos , Humanos , SalivaRESUMO
HYPOTHESIS: Water and oil inhibition treatment is essential for protecting natural and artificial stone surfaces. Bioinspired super-antiwetting surfaces with "lotus effect", together with superoleophobic properties, can be achieved combining very low-surface-energy materials and suitable surface roughness. Exploiting the natural roughness of stone surfaces, the simple and inexpensive fabrication of superamphiphobic surfaces through the coating dispersion deposition is expected. It seems the ideal method for the safeguard of contemporary and historical constructions, since the physical, chemical and aesthetic properties can be maintained. EXPERIMENTS: The new coating agent (3-perfluroether-amidopropylsilane) was synthesized via one-step amidation. Hydrophobicity, robustness and environmental durability were systematically studied on stone surfaces through several tests: contact angle (CA), contact angle hysteresis (CAH), water inhibition efficiency, vapor diffusivity, chemical and mechanical resistance, artificial and field-exposure ageing. FINDINGS: The as-prepared coating demonstrated superamphiphobicity (oil and water CA > 150° with CAH < 10°) on stones with low and high porosity. Moreover, it manifested very high water inhibition efficacy while maintaining high vapor diffusivity and aesthetic properties of substrates. The superhydrophobic coating showed good robustness towards corrosive chemical agents, peeling, mechanical abrasion, water immersion and environmental weathering, thereby permitting various outdoor applications, including stone protection in rainy regions where acid rain is also present.
RESUMO
Preserving ancient wall paintings from damage has become a challenge over the years. Nanosized calcium hydroxide (Ca(OH)2) has been identified as a promising material to preserve wall paintings. However, the synthesis of nanosized Ca(OH)2 is extremely difficult. Here, we demonstrate a breakthrough in wall painting protection enabled by boron nitride nanosheets (BNNSs) through strategic synthesis Ca(OH)2-BNNS nanohybrids using an aqueous method. The BNNS have two significant functionalities in the design and implementation of the Ca(OH)2 nanomaterials. First, the introduction of BNNS results in the successful synthesis of uniform and nanosized Ca(OH)2 (â¼80 nm) in the nanohybrids, which can be attributed to the supersaturation-induced "etching-stripping" mechanism. More interestingly and importantly, a unique gradient penetration structure is strategically formed when applying Ca(OH)2-BNNS hybrids on the wall paintings, i.e., the BNNS-rich layer will be at the surface of wall painting, whereas Ca(OH)2 nanomaterials prefer to penetrate deep in to the wall paintings. This gradient structure will allow the BNNS-rich layer to protect the wall paintings from fire, which is the first report to date among the protection materials for wall paintings; at the same time, nanosized Ca(OH)2 shows superior wall painting consolidation strength compared to commercial Ca(OH)2 material. These results endow new applications of the newly emerging two-dimensional nanomaterials for protecting cultural heritage.
RESUMO
PURPOSE: Peer review is an essential component of quality assurance programs in radiation oncology. The purpose of this work was to assess whether peer reviewers recommend expansion or reduction of planning target volumes (PTVs) and organs at risk (OARs) in prospective multidisciplinary daily contour rounds. METHODS AND MATERIALS: The peer group evaluated the appropriateness of PTVs and OARs for each case according to evidence-based departmental directives. We reviewed 7645 cases that presented between September 2013 and March 2017. We isolated recommendations for PTV/OAR modification and classified each as expansion, reduction, both, or indeterminate. Recommendations were analyzed by technique, site, and physician experience. RESULTS: Eight junior and 7 senior radiation oncologists were included. PTV or OAR modifications were recommended for 750 of 7645 prescriptions (9.7%). The peer group recommended PTV modifications for 534 prescriptions (7.0%): There were 309 expansions (57.9%), 115 reductions (21.5%), 15 both (2.8%), and 95 indeterminate (17.8%). Reasons for PTV expansions included increased nodal coverage and inadequate margins as a result of motion. The peer group recommended OAR modifications for 216 prescriptions (2.8%): There were 102 expansions (47.2%), 23 reductions (10.6%), 2 both (0.9%), and 89 indeterminate (41.2%). Reasons for OAR expansions included missing critical structures and inadequate extent as per departmental standardization. Head and neck represented the largest percentage of PTV recommendations (28.8%). Intensity modulated radiation therapy plans received the most PTV and OAR recommendations (66.8% and 74.5%, respectively). The recommendation rate for senior and junior faculty was 43% and 28%, respectively. CONCLUSIONS: Peer review resulted in recommendations for PTV or OAR change for approximately 10% of cases. Expansions of PTV were recommended >2.5 times more often than reductions and >3 times more often than OAR expansions. This general trend was identified for treatment technique, site, and physician experience. Prospective peer review could yield systematically larger volumes, which could affect multicenter clinical trials.
Assuntos
Neoplasias/radioterapia , Revisão por Pares , Garantia da Qualidade dos Cuidados de Saúde/métodos , Radioterapia (Especialidade)/organização & administração , Planejamento da Radioterapia Assistida por Computador/normas , Algoritmos , Medicina Baseada em Evidências/organização & administração , Humanos , Órgãos em Risco , Avaliação de Programas e Projetos de Saúde , Estudos Prospectivos , Lesões por Radiação/etiologia , Lesões por Radiação/prevenção & controle , Radio-Oncologistas , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodosRESUMO
This study examined the relationship of achievable mean dose and percent volumetric overlap of salivary gland with the planning target volume (PTV) in volumetric-modulated arc therapy (VMAT) plan in radiotherapy for a patient with head-and-neck cancer. The aim was to develop a model to predict the viability of planning objectives for both PTV coverage and organs-at-risk (OAR) sparing based on overlap volumes between PTVs and OARs, before the planning process. Forty patients with head-and-neck cancer were selected for this retrospective plan analysis. The patients were treated using 6 MV photons with 2-arc VMAT plan in prescriptions with simultaneous integrated boost in dose of 70 Gy, 63 Gy, and 58.1 Gy to primary tumor sites, high-risk nodal regions, and low-risk nodal regions, respectively, over 35 fractions. A VMAT plan was generated using Varian Eclipse (V13.6), in optimization with biological-based generalized equivalent uniform dose (gEUD) objective for OARs and targets. Target dose coverage (D 95, D max, conformity index) and salivary gland dose (D mean and D max) were evaluated in those plans. With a range of volume overlaps between salivary glands and PTVs and dose constraints applied, results showed that dose D 95 for each PTV was adequate to satisfy D 95 >95% of the prescription. Mean dose to parotid <26 Gy could be achieved with <20% volumetric overlap with PTV58 (parotid-PTV58). On an average, the D mean was seen at 15.6 Gy, 21.1 Gy, and 24.2 Gy for the parotid-PTV58 volume at <5%, <10%, and <20%, respectively. For submandibular glands (SMGs), an average D mean of 27.6 Gy was achieved in patients having <10% overlap with PTV58, and 36.1 Gy when <20% overlap. Mean doses on parotid and SMG were linearly correlated with overlap volume (regression R 2 = 0.95 and 0.98, respectively), which were statistically significant (P < 0.0001). This linear relationship suggests that the assessment of the structural overlap might provide prospective for achievable planning objectives in the head-and-neck plan.
RESUMO
PURPOSE: The accuracy of a six degree of freedom (6DoF) couch was evaluated using a novel method. METHODS: Cone beam CT (CBCT) images of a 3D phantom (IsoCal) were acquired with different, known combinations of couch pitch and roll angles. Pitch and roll angles between the maximum allowable values of 357 and 3 degrees were tested in one degree increments. A total of 49 combinations were tested at 0 degrees of yaw (couch rotation angle). The 3D positions of 16 tungsten carbide ball bearings (BBs), each 4 mm in diameter and arranged in a known geometry within the IsoCal phantom, were determined in the 49 image sets with in-house software. The BB positions at different rotation angles were determined using a rotation matrix from the original BB positions at zero pitch and roll angles. A linear least squares fit method estimated the rotation angles and differences between detected and nominal rotation angles were calculated. This study was conducted for the case with and without extra weight on the couch. Couch walk shifts for the system were investigated using eight combinations of rotation, roll and pitch. RESULTS: A total of 49 CBCT images with voxel sizes 0.5 × 0.5 × 1.0 mm3 were taken for the case without extra weight on the couch. The 16 BBs were determined to evaluate the isocenter translation and rotation differences between the calculated and nominal couch values. Among all 49 calculations, the maximum rotation angle differences were 0.10 degrees for pitch, 0.15 degrees for roll and 0.09 degrees for yaw. The corresponding mean and standard deviation values were 0.028 ± 0.032, -0.043 ± 0.058, and -0.009 ± 0.033 degrees. The maximum translation differences were 0.3 mm in the left-right direction, 0.5 mm in the anterior-posterior direction and 0.4 mm in the superior-inferior direction. The mean values and corresponding standard deviations were 0.07 ± 0.12, -0.05 ± 0.25, and -0.12±0.14 mm for the planes described above. With an 80 kg phantom on the couch, the maximum translation shift was 0.69 mm. The couch walk translation shifts were less than 0.1 mm and rotation shifts were less than 0.1 degree. CONCLUSIONS: Errors of a new 6DoF couch were tested using CBCT images of a 3D phantom. The rotation errors were less than 0.3 degree and the translation errors were less than or equal to 0.8 mm in each direction. This level of accuracy is warranted for clinical radiotherapy utilization including stereotactic radiosurgery.
Assuntos
Algoritmos , Tomografia Computadorizada de Feixe Cônico , Imagens de Fantasmas , Radiocirurgia , Humanos , RotaçãoRESUMO
By combining incident learning and process failure-mode-and-effects-analysis (FMEA) in a structure-process-outcome framework we have created a risk profile for our radiation medicine practice and implemented evidence-based risk-mitigation initiatives focused on patient safety. Based on reactive reviews of incidents reported in our departmental incident-reporting system and proactive FMEA, high safety-risk procedures in our paperless radiation medicine process and latent risk factors were identified. Six initiatives aimed at the mitigation of associated severity, likelihood-of-occurrence, and detectability risks were implemented. These were the standardization of care pathways and toxicity grading, pre-treatment-planning peer review, a policy to thwart delay-rushed processes, an electronic whiteboard to enhance coordination, and the use of six sigma metrics to monitor operational efficiencies. The effectiveness of these initiatives over a 3-years period was assessed using process and outcome specific metrics within the framework of the department structure. There has been a 47% increase in incident-reporting, with no increase in adverse events. Care pathways have been used with greater than 97% clinical compliance rate. The implementation of peer review prior to treatment-planning and use of the whiteboard have provided opportunities for proactive detection and correction of errors. There has been a twofold drop in the occurrence of high-risk procedural delays. Patient treatment start delays are routinely enforced on cases that would have historically been rushed. Z-scores for high-risk procedures have steadily improved from 1.78 to 2.35. The initiatives resulted in sustained reductions of failure-mode risks as measured by a set of evidence-based metrics over a 3-years period. These augment or incorporate many of the published recommendations for patient safety in radiation medicine by translating them to clinical practice.