RESUMO
The rich and complex phase diagram typical of anisotropic biological or synthetic nanoparticles, has brought a great deal of interest over the equilibrium phase behaviour of non-spherical colloids. Amongst the class of anisotropic nanoparticles, hard spherocylindrical colloids have been, over the years, extensively studied because of their optical properties, for their rich phase diagrams, and their important industrial applications, as model particles for biological systems (viruses), or for example as potential drug carriers having the ability of surviving the attacks of the immune systems. As real anisotropic nanoparticles are often polydisperse in size and/or in shape, unveiling the effect of such a perturbation over their equilibrium phase diagram is of paramount importance. This work focuses on the effects of polydispersity over the full equilibrium phase diagram of hard spherocylindrical colloids (HSCs). Previous studies showed that a polydispersity in L alters the equilibrium phase diagram of HSCs. With this work we determine, both theoretically as well as computationally, the effects due to a generic polydispersity, namely in D, in L and, in both ones, on the equilibrium phase diagram and introduce a viable theoretical generalisation of the Onsager theory that allows us to get some insight into the observed phase behaviour.
RESUMO
Unveiling a general law for adsorption within macromolecules sets an important step forward in the design of nanomaterials with tunable and controllable properties. Reaching such a generalised control would have an important outcome in a plethora of possible fields, from biomedical applications up to materials science. In fact, the definition of classes regrouping adsorbing macromolecules with different geometrical or chemical properties would enormously simplify the design of controllable adsorbing materials, especially when geometrical or chemical constraints are set by the particular application. In this work we derive, through a combination of Scaling Theories and Molecular Dynamics Simulations, a general law for adsorption of spherical non-deformable colloidal nanoparticles within polymeric macromolecules of different geometries. Starting from the case of adsorption of a single colloid within macromolecular systems, we extend the results to the case in which finite adsorption takes place. We then derive simple predictions linking the adsorption potential to general properties of classes of macromolecules, and introduce a set of measurable quantities that can be exploited as an indirect measurement for loading.
Assuntos
Nanoestruturas , Polímeros , Adsorção , Coloides/química , Substâncias Macromoleculares , Polímeros/químicaRESUMO
By means of multiscale molecular simulation, we show that solvophilic-solvophobic AB diblock copolymer brushes in the semi-dilute regime present a re-entrant disorder/order/disorder transition. The latter is fully controllable through two parameters: the grafting density and the solvophobic to solvophilic ratio of the tethered macromolecules. Upon increasing density, chains first aggregate into patches, then further order into a crystalline phase and finally melt into a disordered phase. We demonstrate that the order/disorder transition can be explained through the peculiar properties of the aggregates: upon increasing density, the aggregation number grows as expected. On the contrary, their projection on the plane shrinks, thus melting the emergent ordered phase. Such a density dependent shrinkage, seen for the first time as the cause to an order/disorder phase transition, is as a consequence of the entropic/enthalpic competition that characterises the hierarchical self-assembly of the brush.
RESUMO
We study the adsorption properties in bottlebrush/colloid binary mixtures by combining scaling theories, theoretical predictions, self-consistent field computations (SCFC), and molecular dynamics simulations. In particular, we focus on adsorption in the case in which an attraction is set between the two species, by analysing the solution properties for a range of interactions and the size ratio between colloids and bottlebrushes, in the case in which colloids are smaller than the macromolecules. We show that the onset of adsorption is dominated by the local properties of the adsorbing guest particle. This allows us to use the local similarity between a cylindrical bottlebrush and a spherical star polymer to predict the region of the parameter space in which the adsorption takes place. By employing simple scaling arguments, we thus extend the analytical results on the adsorption obtained for binary mixtures of star polymers/colloid nanoparticles. We then validate our predictions with molecular dynamics simulations. Moreover, by means of SCFC, we assess the adsorption-to-depletion transition of nanoparticles in polymeric bottlebrushes. Our results pave the road towards a smart rational design and coarse-graining of adsorbing/releasing systems, where an elongated shape might play an important role.
RESUMO
Bottle brushes are polymeric macromolecules made of a linear polymeric backbone grafted with side chains. The choice of the grafting density σg, the length ns the grafted side chains and their chemical nature fully determines the properties of each macromolecule, such as its elasticity and its folding behaviour. Typically, experimental bottle brushes are systems made of tens of thousands of monomeric units, rendering a computational approach extremely expensive, especially in the case of bottle brush solutions. A proper coarse graining description of these macromolecules thus appears essential. We present here a theoretical approach able to develop a general, transferable and analytical multi-scale coarse graining of homopolymeric bottle brush polymers under good solvent conditions. Starting from scaling theories, each macromolecule is mapped onto a chain of tethered star polymers, whose effective potential is known from scaling predictions, computational and experimental validations and can be expressed as a function of the number of arms f, and the length na of each arm. Stars are then tethered to one another and the effective potential between them is shown to only depend on the key parameters of the original bottle brush polymer (σg, ns). The generalised form of the effective potential is then used to reproduce properties of the macromolecules obtained both with scaling theories and with simulations. The general form of the effective potentials derived in the current study allows a theoretical and computational description of the properties of homopolymeric bottle brush polymers for all grafting densities and all lengths of both backbone and grafted arms, opening the path for a manifold of applications.
RESUMO
Limited bonding valence, usually accompanied by well-defined directional interactions and selective bonding mechanisms, is nowadays considered among the key ingredients to create complex structures with tailored properties: even though isotropically interacting units already guarantee access to a vast range of functional materials, anisotropic interactions can provide extra instructions to steer the assembly of specific architectures. The anisotropy of effective interactions gives rise to a wealth of self-assembled structures both in the realm of suitably synthesized nano- and micro-sized building blocks and in nature, where the isotropy of interactions is often a zero-th order description of the complicated reality. In this review, we span a vast range of systems characterized by limited bonding valence, from patchy colloids of new generation to polymer-based functionalized nanoparticles, DNA-based systems and proteins, and describe how the interaction patterns of the single building blocks can be designed to tailor the properties of the target final structures.
Assuntos
Coloides/química , DNA/química , Nanopartículas/química , Proteínas/química , Modelos Moleculares , Polímeros/químicaRESUMO
Soft nanocomposites represent both a theoretical and an experimental challenge due to the high number of the microscopic constituents that strongly influence the behaviour of the systems. An effective theoretical description of such systems invokes a reduction of the degrees of freedom to be analysed, hence requiring the introduction of an efficient, quantitative, coarse-grained description. We here report on a novel coarse graining approach based on a set of transferable potentials that quantitatively reproduces properties of mixtures of linear and star-shaped homopolymeric nanocomposites. By renormalizing groups of monomers into a single effective potential between a f-functional star polymer and an homopolymer of length N0, and through a scaling argument, it will be shown how a substantial reduction of the to degrees of freedom allows for a full quantitative description of the system. Our methodology is tested upon full monomer simulations for systems of different molecular weight, proving its full predictive potential.
RESUMO
We present extensive experimental and theoretical investigations on the structure, phase behavior, dynamics and rheology of model soft-hard colloidal mixtures realized with large, multiarm star polymers as the soft component and smaller, compact stars as the hard one. The number and length of the arms in star polymers control their softness, whereas the size ratio, the overall density and the composition are additional parameters varied for the mixtures. A coarse-grained theoretical strategy is employed to predict the structure of the systems as well as their ergodicity properties on the basis of mode coupling theory, for comparison with rheological measurements on the samples. We discovered that dynamically arrested star-polymer solutions recover their ergodicity upon addition of colloidal additives. At the same time the system displays demixing instability, and the binodal of the latter meets the glass line in a way that leads, upon addition of a sufficient amount of colloidal particles, to an arrested phase separation and reentrant solidification. We present evidence for a subsequent solid-to-solid transition well within the region of arrested phase separation, attributed to a hard-sphere-mixture type of glass, due to osmotic shrinkage of the stars at high colloidal particle concentrations. We systematically investigated the interplay of star functionality and size ratio with glass melting and demixing, and rationalized our findings by the depletion of the big stars due to the smaller colloids. This new depletion potential in which, contrary to the classic colloid-polymer case, the hard component depletes the soft one, has unique and novel characteristics and allows the calculation of phase diagrams for such mixtures. This work covers a broad range of soft-hard colloidal mixture compositions in which the soft component exceeds the hard one in size and provides general guidelines for controlling the properties of such complex mixtures.
RESUMO
We study the effective interactions and phase behavior of star polymer-colloid mixtures through theory and Monte Carlo simulations. We extend previous theoretical approaches for calculating the effective star-colloid pair potential to take into account attractive contributions, which become significant at worsening solvent conditions. In order to assess the validity of our simulation and theory, we compute the effective interactions via virtual move parallel tempering Monte Carlo simulations using a microscopic bead-spring model for the star polymer and achieve excellent agreement. Finally, we perform grand canonical Monte Carlo simulations of the coarse-grained systems to study the effect of solvent quality on the phase behavior.
RESUMO
We present a multi-scale molecular modeling of concentrated solutions of unknotted and non-concatenated ring polymers under good solvent conditions. The approach is based on a multi-blob representation of each ring polymer, which is capable of overcoming the shortcomings of single-blob approaches that lose their validity at concentrations exceeding the overlap density of the solution [A. Narros, A. J. Moreno, and C. N. Likos, Soft Matter, 2010, 6, 2435]. By means of a first principles coarse-graining strategy based on analytically determined effective pair potentials between the blobs, computed at zero density, we quantitatively reproduce the single molecule and solution properties of a system with well-defined topological constraints. Detailed comparisons with the underlying, monomer-resolved model demonstrate the validity of our approach, which employs fully transferable pair potentials between connected and unconnected blobs. We demonstrate that the pair structure between the centers of mass of the rings is accurately reproduced by the multi-blob approach, thus opening the way for simulation of arbitrarily long polymers. Finally, we show the importance of the topological constraint of non-concatenation on the structure of the concentrated solution and in particular on the size of the correlation hole and the shrinkage of the rings as melt concentrations are approached.
RESUMO
The design of nano-functionalised membranes or channels, able to effectively adsorb pollutants in aqueous solutions, is a topic that is gaining a great deal of attention in the materials science community. With this work we explore, through a combination of scaling theories and molecular dynamics simulations, the adsorption of spherical non-deformable colloidal nanoparticles within planar polymeric brushes. Our strategy is twofold: first, we generalise the Alexander-de Gennes theory for planar homopolymeric brushes to the case of diblock copolymer brushes, then we map the adsorbing homopolymeric brushes onto a diblock copolymer system, where the adsorbed colloids and all interacting monomers are considered monomers in bad solvent and we apply the generalised scaling theory to this effective diblock copolymer. This allows the prediction of the average conformation of the grafted substrate, i.e. its average height, as a function of the amount of loaded particles, as well as the introduction of a continuous mapping between a homopolymeric brush, the fraction of loaded particles and the average height of the adsorbing substrate.
RESUMO
[This corrects the article DOI: 10.1021/acsomega.3c02921.].
RESUMO
Knotted chains are a promising class of polymers with many applications for materials science and drug delivery. Here we introduce an experimentally realizable model for the design of chains with controllable topological properties. Recently, we have developed a systematic methodology to construct self-assembling chains of simple particles, with final structures fully controlled by the sequence of particles along the chain. The individual particles forming the chain are colloids decorated with mutually interacting patches, which can be manufactured in the laboratory with current technology. Our methodology is applied to the design of sequences folding into self-knotting chains, in which the end monomers are by construction always close together in space. The knotted structure can then be externally locked simply by controlling the interaction between the end monomers, paving the way to applications in the design and synthesis of active materials and novel carriers for drugs delivery.
Assuntos
Coloides/química , Modelos Químicos , Polímeros/química , Algoritmos , Modelos MolecularesRESUMO
By employing rheological experiments, mode coupling theory, and computer simulations based on realistic coarse-grained models, we investigate the effects of small, hard colloids on the glassy states formed by large, soft colloids. Multiarm star polymers mimic hard and soft colloids by appropriately varying the number and size of their arms. The addition of hard colloids leads, depending on their concentration, to either melting of the soft glass or the emergence of two distinct glassy states. We explain our findings by depletion of the colloids adjacent to the stars, which leads to an arrested phase separation when the repulsive glass line meets the demixing binodal. The parameter-free agreement between experiment, theory, and simulations suggests the generic nature of our results and opens the route for designing soft-hard colloidal composites with tunable rheology.
RESUMO
The urgency to find complementary therapies to current SARS-CoV-2 vaccines, whose effectiveness is preserved over time and not compromised by the emergence of new and emerging variants, has become a critical health challenge. We investigate the possibility of jamming the opening of the Receptor Binding Domain (RBD) of the spike protein of SARS-CoV-2 with small compounds. Through in silico screening, we identified two potential candidates that would lock the Receptor Binding Domain (RBD) in a closed configuration, preventing the virus from infecting the host cells. We show that two drugs already approved by the FDA, mithramycin and dihydroergotamine, can block infection using concentrations in the µM range in cell-based assays. Further STD-NMR experiments support dihydroergotamine's direct interaction with the spike protein. Overall, our results indicate that repurposing of these compounds might lead to potential clinical drug candidates for the treatment of SARS-CoV-2 infection.
RESUMO
By means of multiscale molecular simulations, we show that telechelic-star polymers are a simple, robust, and tunable system, which hierarchically self-assembles into soft-patchy particles and mechanically stabilizes selected, open crystalline structures. The self-aggregating patchy behavior can be fully controlled by the number of arms per star and by the fraction of attractive monomeric units at the free ends of the arms. Such self-assembled soft-patchy particles while forming, upon augmenting density, gel-like percolating networks, preserve properties as particle size, number, and arrangement of patches per particle. In particular, we demonstrate that the flexibility inherent in the soft-patchy particles brings forward a novel mechanism that leads to the mechanical stability of diamond and simple cubic crystals over a wide range of densities, and for molecular sizes ranging from about 10 nm up to the micrometer scale.
Assuntos
Substâncias Macromoleculares/química , Modelos Químicos , Polímeros/química , Análise por Conglomerados , Simulação por Computador , Modelos Moleculares , Conformação Molecular , Tamanho da PartículaRESUMO
We consider mixtures of self-avoiding multiarm star polymers with hard colloids that are smaller than the star polymer size. By employing computer simulations, and by extending previous theoretical approaches, developed for the opposite limit of small star polymers [A. Jusufi et al., J. Phys.: Condens. Matter 13, 6177 (2001)], we coarse-grain the mixture by deriving an effective cross-interaction between the unlike species. The excellent agreement between theory and simulation for all size ratios examined demonstrates that the theoretical approaches developed for the colloidal limit can be successfully modified to maintain their validity also for the present case of the protein limit, in contrast to the situation for mixtures of colloids and linear polymers. We further analyze, on the basis of the derived interactions, the non-additivity parameter of the mixture as a function of size ratio and star functionality and delineate the regions in which we expect mixing as opposed to demixing behavior. Our results are relevant for the study of star-colloid nanocomposites and pave the way for further investigations of the structure and thermodynamics of the same.
RESUMO
Herein, we show a comprehensive experimental, theoretical, and computational study aimed at designing macromolecules able to adsorb a cargo at the nanoscale. Specifically, we focus on the adsorption properties of star diblock copolymers, i.e., macromolecules made by a number f of H-T diblock copolymer arms tethered on a central core; the H monomeric heads, which are closer to the tethering point, are attractive toward a specific target, while the T monomeric tails are neutral to the cargo. Experimentally, we exploited the adaptability of poly(2-oxazoline)s (POxs) to realize block copolymer-coated nanoparticles with a proper functionalization able to interact with heavy metals and show or exhibit a thermoresponsive behavior in aqueous solution. We here present the synthesis and analysis of the properties of a high molecular mass block copolymer featured by (i) a polar side chain, capable of exploiting electrostatic and hydrophilic interaction with a predetermined cargo, and (ii) a thermoresponsive scaffold, able to change the interaction with the media by tuning the temperature. Afterward, the obtained polymers were grafted onto iron oxide nanoparticles and the thermoresponsive properties were investigated. Through isothermal titration calorimetry, we then analyzed the adsorption properties of the synthesized superparamagnetic nanoparticles for heavy metal ions in aqueous solution. Additionally, we use a combination of scaling theories and simulations to link equilibrium properties of the system to a prediction of the loading properties as a function of size ratio and effective interactions between the considered species. The comparison between experimental results on adsorption and theoretical prediction validates the whole design process.
RESUMO
We investigate the self-assembly of an athermal model of AB diblock copolymers into disordered and ordered micellar microphases. The original microscopic lattice model with ideal A strands and self-avoiding B strands is mapped onto a system of ultrasoft dumbbells, with monomer-averaged effective interactions between the centers of mass (CMs) of the two blocks. Extensive Monte Carlo simulations of this coarse-grained model are reported for several length ratios f = L(A)/(L(A) + L(B)) of the two strands of lengths L(A) and L(B). Clear-cut evidence is found for clustering and self-assembly into micelles with a mean aggregation number of n approximately equal 100 beyond a critical micellar concentration (cmc) in the semidilute regime. The cmc is found to decrease with increasing f, as predicted by an analytic calculation based on the random phase approximation. The initially disordered dispersion of polydisperse spherical micelles undergoes a disorder-order transition to a micellar crystal phase at higher copolymer concentrations. The effective pair potential between the micellar CMs is determined by inverting the measured CM-CM pair distribution function and is found to become steeper with increasing density.
Assuntos
Micelas , Polímeros/química , Termodinâmica , Simulação por Computador , Modelos Químicos , Método de Monte CarloRESUMO
The fabrication of versatile building blocks that reliably self-assemble into desired ordered and disordered phases is amongst the hottest topics in contemporary materials science. To this end, microscopic units of varying complexity, aimed at assembling the target phases, have been thought, designed, investigated and built. Such a path usually requires laborious fabrication techniques, especially when specific functionalisation of the building blocks is required. Telechelic star polymers, i.e., star polymers made of a number of f di-block copolymers consisting of solvophobic and solvophilic monomers grafted on a central anchoring point, spontaneously self-assemble into soft patchy particles featuring attractive spots (patches) on the surface. Here we show that the tunability of such a system can be widely extended by controlling the physical and chemical parameters of the solution. Indeed, under fixed external conditions the self-assembly behaviour depends only on the number of arms and on the ratio of solvophobic to solvophilic monomers. However, changes in temperature and/or solvent quality make it possible to reliably change the number and size of the attractive patches. This allows the steering of the mesoscopic self-assembly behaviour without modifying the microscopic constituents. Interestingly, we also demonstrate that diverse combinations of the parameters can generate stars with the same number of patches but different radial and angular stiffness. This mechanism could provide a neat way of further fine-tuning the elastic properties of the supramolecular network without changing its topology.